2AXTH-K2PROMagnetic wireless charger

车载磁吸折叠无线充 说明书 K2pro USER MANUAL CAR MAGNETIC FOLDABLE WIRELESS CHARGER Magnetic wireless charger K2pro 产品介绍 内容 1充电区域2LED3USB-C接口4 5 风扇散热口 6 转轴 支撑杆 7 吸盘主体 8 吸盘 折叠磁吸无线充 x1 数据线 x1 说明书 x1 产品参数 使用说明 产品名称：K2pro 车载折叠磁吸无线充 输入：5V-3A/9V-3A/12-3A/15-3A 工作温度: -10°C ~ +45°C 输出：5W/7.5W/10W/15W/25W 充电距离：≤4mm (推荐工作距离3mm) 磁吸力: 1.6KG 注意事项 1. 请勿在车内60摄氏度以上高温条件下使用本产品。 2. 请勿在专业赛车或汽车极限越野时使用该产品。 3. 智能手机非磁吸手机，请增加引磁环后使用该产品。 4. 请勿过度挤压或碰撞设备。 5. 请勿与带磁条或者芯片的磁卡（身份证、银行卡等）放置太近, 避免造成磁 卡失效。 保 修 本产品三包有效期：自购买日起（以寄回的客户回执或购机发票日期为准）， 提供12个月保修服务，其它附件（如包装等）不属三包范围，产品外观为人 为损坏，附件损失，不在三包之列。不在三包之内或超过三包期的产品，客户 仍享受维修服务，但需要交纳维修工本费。 产品保修卡 型号： 购买日期： 经销商名称： 购买商号： 姓名： 地址： 电话： 为了您的权益，请您认真填写，并妥善保管，作为维修前凭证！请勿擅自修改内容， 否则视为作废。本公司保留对产品售后服务条例的最终解释权。 保修内容保修日期 Introduction Package 1 Charging Area2LED4Fan Cooling Vent 3 USB-C Interface 5Hinge6Support Rod7Suction Cup Body8Suction Cup Magnetic Mount x1 C-C Cable x1 User Manual x1 Specifications Model: K2pro Input: 5V-3A/9V-3A/12-3A/15-3A Working temperature: -10°C ~ +45°C Output: 5W/7.5W/10W/15W/25W Induction distance：≤4mm Magnetic attraction: 1.6KG Precautions 1. Do not use this product in temperatures exceeding 60°C inside the vehicle. 2. Do not use this product during professional racing or extreme off-road driving. 3. For non-magnetic smartphones, attach a magnetic ring before using the product. 4. Do not excessively squeeze or impact the device. 5. Keep the device away from magnetic cards with strips or chips (such as ID cards, bank cards, etc.) to avoid demagnetization or damage. Product Warranty Card For your rights and interests, please fill in carefully and keep it safely as a pre-repair certificate! Do not modify the content without authorization, otherwise it will be considered invalid The company reserves the right of final interpretation of the product atter-sales service regulations. No.: Date of purchase: Dealer name: Dealer: Name:Telephone: Address: Warranty cantentWarranty date The guarantee Products three guarantees valid time: From purchasing date (Prevail to the customer receipt date or invoice date), provide 12 months guarantee. Prod-uct surface man-made damage, acces sories missed are not include in this guarantee. repair service for you for the product is out of the guarantee period or not covered by warranty, but you need to pay the repair charge. 尺寸：70 x 70mm 材质：105g铜版纸+正反面印刷 样式：手风琴 LED 智能指示灯 模式 通电 待机 充电 检测到异物 LED灯常亮 LED灯常亮 LED灯熄灭，风扇工作 LED灯快闪5S熄灭, 风扇停止 指示灯 充满LED灯熄灭，风扇停止工作 Lighting mode Standby Charging Foreign Object Detected LED Light Stays On LED Light Stays On LED Light Off, Fan Operating LED flashes rapidly for 5 seconds then turns off, fan stops. Full ChargeLED Light Off, Fan Not Operating ModeIndicator light Power on 性能概述 1、本产品最大充电功率为25W，充电效率根据充电环境和手机会有所 不同。 2、无线充的最佳距离是4mm以内并不能穿透金属，所以需要避免用 金属的或太厚的（大于4mm）手机保护壳，这样才能保证手机快速的 无线充电。 3、如果手机不支持无线充电或者检测到金属异物，蓝色指示灯闪烁。 4、使用产品时，拉动面盖可使产品展开；下压面盖可使产品收起。 5、从产品上取下手机后，指示灯即刻常亮待机状态。停车熄火,产品停 止供电时，指示灯熄灭，手机依旧被磁力吸附在产品上, 可随时取下。 1. The maximum charging power of this product is 25W. Charging efficiency may vary depending on the charging environment and the mobile device. 2. The optimal wireless charging distance is within 4mm, and it cannot penetrate metal. Therefore, metal or overly thick (greater than 4mm) phone cases should be avoided to ensure fast wireless charging. 3. If the phone does not support wireless charging or if metal foreign objects are detected, the blue indicator light will flash. 4. When using the product, pulling the cover will unfold it, while pressing down on the cover will retract it. 5. After removing the phone from the product, the indicator light will immediately enter standby mode and remain steadily lit. When the vehicle is parked and powered off, the indicator light will turn off, but the phone will remain magnetically attached to the product and can be removed at any time. Performance Overview 1 2 4 3 5 7 6 8 1 2 4 3 5 7 6 8 注意： 为了获得更好的用户体验，建议在粘贴吸盘之前将要粘贴的区域 擦拭干净。 安装指南 步骤1： 选择仪表板上的一个 平坦表面并先清洁它。 步骤2： 撕下纳米滴胶的保护膜。 步骤3： 将吸盘中框向左旋转以 激活真空模式，牢固固定支架。 步骤4： 安装好后就可以调整支架以找到 您所需的合适角度使用了。 将吸盘中框向左旋转 以激活真空模式 如何移除它? 将吸盘中框向右旋转关闭真空模式，稍微用力取下产品。 请注意: 为了获得更好的用户体验，建议在粘贴吸盘前先将要 粘贴的区域擦拭干净。 将吸盘中框向右旋转 关闭真空模式 Mounting Guide Step 1： Choose a flat surface on the dashboard and clean it thoroughly. Step 2： Peel off the protective film from the nano gel pad. Step 3： Rotate the suction cup middle frame to the left to activate vacuum mode and securely fix the mount. Step 4： Place the stand base onto the magnetic section of the suction cup to assemble. Then adjust the stand to find the desired viewing angle for use. Twist clockwise to lock up HOW TO REMOVE IT? Rotate the suction cup middle frame to the right to release the vacuum mode, then gently pull to remove the product. Twist counterclockwise to release Please Note： To have a better user experience, it is recommended to wipe the area to be pasted clean before pasting the suction cup. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: FCC US Agent, LLC FRN: 0033402884 Contact Name: Tim Payne Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Telephone No: 708-571-3148 Email: [email protected] Applicant: Company name: Shenzhen Caibo Technology Co., Ltd. Product Description: Magnetic wireless charger Grantee code: 2AXTH FCC ID: 2AXTH-K2PRO FRN： 0030078273 Contact Name: Linjun Hu Address: F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Telephone No: 13713719057 Email: [email protected] [Shenzhen Caibo Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [FCC US Agent, LLC] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Caibo Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2026/09/01 Applicant’s Name: Linjun Hu US Agent’s Name: Tim Payne Title: CEO Title: President Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Magnetic wireless charger Grantee code: 2AXTH FCC ID: 2AXTH-K2PRO FRN: 0030078273 Contact Name: Linjun Hu Address: F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Telephone No: 13713719057 Fax No: / Email: [email protected] i. [Shenzhen Caibo Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Caibo Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Caibo Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Date: 2026-08-31 Applicant’s Name: Linjun Hu Title: CEO Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Caibo Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device Magnetic wireless charger Company name Shenzhen Caibo Technology Co., Ltd. Grantee code 2AXTH FCC ID 2AXTH- K2PRO FRN 0030078273 Contact name Linjun Hu Address F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen, China Telephone number 13713719057 E-mail [email protected] Chipset/module information NU17111A Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 4 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Linjun Hu Date: 2026-9-01

Shenzhen Caibo Technology Co., Ltd. Product Similarity Declaration Product name: Magnetic wireless charger Model name: K2pro, K2M FCC ID: 2AXTH-K2PRO We (Shenzhen Caibo Technology Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: Linjun Hu Title: CEO Place, date: 2026/08/31

TCB CALL página 1 File FCC ID: 2AXTH-K2PRO Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://opencorporates.com/companies/us_il/LLC_12842678 In google: TCB CALL página 2 Bank information TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 TCB CALL página 6 TCB CALL página 7 TCB CALL página 8 TCB CALL página 9 ►CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 Shenzhen Caibo Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXTH-K2PRO To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Linjun Hu Title: CEO

Shenzhen Caibo Technology Co., Ltd. C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Caibo Technology Co., Ltd. Address: F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Product Name: Magnetic wireless charger Model Number: K2pro, K2M FCC Identifier: 2AXTH-K2PRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Linjun Hu Date: 01/09/2026 Title: CEO Signature of applicant:

Report No. ITA26B08001489W Page 1 of 4 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Details of:External view Details of:External view Report No. ITA26B08001489W Page 2 of 4 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Details of:External view Details of:External view Report No. ITA26B08001489W Page 3 of 4 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Details of:External view Details of:External view Report No. ITA26B08001489W Page 4 of 4 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Details of:External view Details of:External view

FCC ID: 2AXTH-K2PRO Model ： K2Pro Label and Label location

Report No. ITA26B08001489WPage 1 of 2 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Details of:Internal view Details of:PCB view Report No. ITA26B08001489WPage 2 of 2 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Details of:PCB view Details of:WPT antenna view

Test Report issued under the responsibility of: Itestek Testing Co., Ltd. (Dongguan) TEST REPORT RADIO FREQUENCY FOR WIRELESS POWER TRANSFER Report Number.............................:ITA26B08001489W 002 Sample date..................................:2026-07-24 Test date .......................................:2026-07-24 to 2026-08-27 Issue date .....................................:2026-08-28 Total number of pages ................:7 Standard/According to ...............:KDB 680106 D01 Wireless Power Transfer v04 Template version .........................:V2.0 Testing Laboratory ......................:Itestek Testing Co., Ltd. (Dongguan) Address ........................................:Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Tested by ......................................:Tom Zhang Checked by...................................:Oliver Qiao Approved by .................................:Joker Qi Applicant’s name .........................:Shenzhen Caibo Technology Co., Ltd. Address ........................................:F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen China Manufacturer’s name...................:Same as applicant Address ........................................:Same as applicant Factory’s name ............................:Same as applicant Address ........................................:Same as applicant Trade Mark....................................:KOAKUMA Product description .....................:Magnetic wireless charger Model/Type reference ..................:K2pro, K2M Ratings..........................................:Input: 5Vdc, 3A; 9Vdc, 3A; 12Vdc, 3A; 15Vdc, 3A Wireless charging output: 5W, 7.5W, 10W, 15W, 25W FCC ID ...........................................:2AXTH-K2PRO Test result.....................................:Pass Report No.:ITA26B08001489W 002Page 2 of 7 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Declare: 1. This report shall not be partially reproduced without the consent of the laboratory. 2. If the report without tester's signature, auditor's signature, approver's signature and inspection seal, the report is invalid. 3. The test results are valid only for the tested samples. 4. After test and evaluation, our opinion is that the equipment provided for test compliance with the requirement of the above relevant standards. 5. If the report is not stamped with the accreditation recognized seal, it will only be used for scientific research, education, and internal quality control activities, and is not used for the purpose of issuing supporting data to the society. Testing laboratory: Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China FCC designation number CN1436 A2LA has accredited, certificate Number 7609.01 Report No.:ITA26B08001489W 002Page 3 of 7 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China 1. General test information 1.1.Description of EUT Details of technical specification refer to the description in follows: Test model numberK2pro Test sample numberA-001 Model differentAll models are identical, except model number Frequency range (Hz) 110.1K-205K Hz: output power 5W, 7.5W, 10W 360K Hz: output power 15W, 25W Modulation techniqueASK Antenna typeCoil Antenna Antenna gain0 dBi Temperature range (°C)-10 ~ 45 Hardware versionV1.0 Software versionV1.0 Block diagram EUT configuration for test EUT/AEAC Mains 1.2.Test modes ModeTest Status 1 AC Mains (120Vac, 60Hz) + Wireless charging of phone for output 5W (110.1K-205KHz) 2 AC Mains (120Vac, 60Hz) + Wireless charging of phone for output 7.5W (110.1K-205KHz) 3 AC Mains (120Vac, 60Hz) + Wireless charging of phone for output 10W (110.1K-205KHz) 4 AC Mains (120Vac, 60Hz) + Wireless charging of phone for output 15W (360KHz) 5 AC Mains (120Vac, 60Hz) + Wireless charging of phone for output 25W (360KHz) 6AC Mains (120Vac, 60Hz) + Standby mode Remark: The aforementioned testing modes were all conducted under battery Status ≤1% (full load), battery Status ≈50% (half load), and battery Status ≥99% (no load) conditions. After testing, it was found that the test data under battery Status ≤1% (full load) condition is the worst-case. The report reflecting only the worst-case test data. 1.3.Test environment conditions During the measurement the environmental conditions were within the listed ranges: Report No.:ITA26B08001489W 002Page 4 of 7 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Temperature range (°C)15-35 Humidity range (%)30-75 Pressure range (kPa)85-105 1.4.Test environment conditions ItemEquipmentMfr/BrandModel / TypeSeries No.Note 1LoadAppleIphone 17-- Wireless charging of phone: 5W, 7.5W, 15W, 25W 2LoadYBT P V3.1- Qi2.2/MPP -- Wireless charging of phone: 5W, 7.5W, 10W, 15W, 25W 3 XIAOMI Charge XIAOMIMDY-14-ED-- Input: 100-240Vac, 50/60Hz, 3.0A Output: USB-C1/C2/C3 5Vdc, 3A; 9Vdc, 3A; 15Vdc, 3A; 11Vdc, 6.1A; 20Vdc, 5A; 20Vdc, 6A USB-A 5Vdc, 3A; 9Vdc, 3A; 12Vdc, 2.25A Remark: The test utilized XIAOMI Charge and the input voltage of XIAOMI Charge was 120Vac, 60Hz. Report No.:ITA26B08001489W 002Page 5 of 7 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovat…

Text truncated - open the document above for the full version.

Test Report issued under the responsibility of: Itestek Testing Co., Ltd. (Dongguan) TEST REPORT FEDERAL COMMUNICATIONS COMMISSION FOR WIRELESS POWER TRANSFER Report Number.............................:ITA26B08001489W 001 Sample date..................................:2026-07-24 Test date .......................................:2026-07-24 to 2026-08-27 Issue date .....................................:2026-08-28 Total number of pages ................:19 Standard/According to ...............:FCC CFR Title 47 Part 15 Subpart C ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Template version .........................:V2.0 Testing Laboratory ......................:Itestek Testing Co., Ltd. (Dongguan) Address ........................................:Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Tested by ......................................:Tom Zhang Checked by...................................:Oliver Qiao Approved by .................................:Joker Qi Applicant’s name .........................:Shenzhen Caibo Technology Co., Ltd. Address ........................................:F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen China Manufacturer’s name...................:Same as applicant Address ........................................:Same as applicant Factory’s name ............................:Same as applicant Address ........................................:Same as applicant Trade Mark....................................:KOAKUMA Product description .....................:Magnetic wireless charger Model/Type reference ..................:K2pro, K2M Ratings..........................................:Input: 5Vdc, 3A; 9Vdc, 3A; 12Vdc, 3A; 15Vdc, 3A Wireless charging output: 5W, 7.5W, 10W, 15W, 25W FCC ID ...........................................:2AXTH-K2PRO Test result.....................................:Pass Report No.:ITA26B08001489W 001Page 2 of 19 Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518000, People's Republic of China Declare: 1. This report shall not be partially reproduced without the consent of the laboratory. 2. If the report without tester's signature, auditor's signature, approver's signature and inspection seal, the report is invalid. 3. The test results are valid only for the tested samples. 4. After test and evaluation, our opinion is that the equipment provided for test compliance with the requirement of the above relevant standards. 5. If the report is not stamped with the accreditation recognized seal, it will only be used for scientific research, education, and internal quality control activities, and is not used for the purpose of issuing supporting data to the society. Testing laboratory: Itestek Testing Co., Ltd. (Dongguan) Room 116, Building 8 and Room 606, Building 3, Innovation Port of Hanyuwan…

Text truncated - open the document above for the full version.