AS5BBTRX-06LTE RRH2X40-07L-AT

APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Alcatel-Lucent Use pursuant to Company Instructions Section 2.1033(C)(3) USERS MANUAL APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Alcatel-Lucent Use pursuant to Company Instructions USERS MANUAL SECTION 2.1033(c) (3) A copy of the installation and operating instructions to be furnished the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to FCC when it becomes available. RESPONSE: A copy of (1) 9442 Remote Radio Head (RRH) Hardware Installation Manual is attached. Titlepage Alcatel-Lucent FDDRemoteRadioHead700MHz_15.5(LowerBand) HardwareInstallationManual(formerly418–000–425) 3MN-00075-0002-RJZZA Issue0 | September2012 Alcatel-Lucent–Proprietary Usepursuanttoapplicableagreements Usepursuanttoapplicableagreements Legalnotice Legalnotice Alcatel,Lucent,Alcatel-LucentandtheAlcatel-LucentlogoaretrademarksofAlcatel-Lucent.Allothertrademarksarethepropertyoftheirrespective owners. Theinformationpresentedissubjecttochangewithoutnotice.Alcatel-Lucentassumesnoresponsibilityforinaccuraciescontainedherein. Copyright©2012Alcatel-Lucent.Allrightsreserved. Containsproprietary/tradesecretinformationwhichisthepropertyofAlcatel-Lucentandmustnotbemadeavailableto,orcopiedorusedbyanyoneoutside Alcatel-Lucentwithoutitswrittenauthorization. Nottobeusedordisclosedexceptinaccordancewithapplicableagreements. Notice Everyeffortwasmadetoensurethattheinformationinthisdocumentwascompleteandaccurateatthetimeofprinting.However,informationissubjectto change. DevelopedbytheAlcatel-LucentDocumentationTeam. Usepursuanttoapplicableagreements Alcatel-Lucent–Proprietary Usepursuanttoapplicableagreements Contents Aboutthisdocument Purpose ............................................................................................................................................................................................viivii Safetyinformation ......................................................................................................................................................................viivii Intendedaudience .......................................................................................................................................................................viivii Safetylabels ..................................................................................................................................................................................viivii Systemssupported ......................................................................................................................................................................viivii Howtocomment .........................................................................................................................................................................viivii 1Safety Overview ......................................................................................................................................................................................1-11-1 Structureofsafetystatements ...............................................................................................................................................1-21-2 Safety ...........................................................................................................................................................................................1-41-4 Safety-specifichazards .........................................................................................................................................................1-51-5 Productsafety ..........................................................................................................................................................................1-101-10 2Productoverview Overview ......................................................................................................................................................................................2-12-1 Functionaldescription .............................................................................................................................................................2-22-2 RRHdescription ........................................................................................................................................................................2-32-3 RRHweightsanddimensions ..............................................................................................................................................2-62-6 3Siteconfigurations Overview ......................................................................................................................................................................................3-13-1 RFconfigurations .....................................................................................................................................................................3-23-2 CommonPublicRadioInterfaceConfiguration ............................................................................................................3-33-3 .................................................................................................................................................................................................................................... FDDRRH700L 3MN-00075-0002-RJZZA Issue0 September2012 Alcatel-Lucent–Proprietary Usepursuanttoapplicableagreements iii 4Tools,materials,andchecklist Overview ......................................................................................................................................................................................4-14-1 Preparatoryinformation Overview ......................................................................................................................................................................................4-24-2 T…

Text truncated - open the document above for the full version.

APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 QUALIFICATIONS AND CERTIFICATIONS SECTION 2.911(d) APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 June 1, 2010 SECTION 2.911(d) QUALIFICATION OF ENGINEER (who performed or supervised the Tests). Dheena D. Moongilan is a Distinguished Member of Technical Staff, Alcatel-Lucent. He received his BSEE, and MSEE from Madras University, India and another MSEE from Illinois Institute of Technology, Chicago, Illinois. He was trained in FCC testing procedures by his former Supervisor, Donald N. Heirman. He has 28 years of EMC testing experience. He is a NARTE certified EMC Engineer, certificate #EMC-00/1022-NE. SECTION 2.911(d) CERTIFICATION OF TECHNICAL TEST DATA I hereby certify that the technical test data are the results of tests performed or supervised by me. Dheena Moongilan Distinguished Member of Technical Staff Global Product Compliance Laboratory MH 5A-115, Alcatel-Lucent 600, Mountain Avenue Murray Hill, NJ 07974-0636 Tel: 908 582 5539 APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 MANUFACTURERS ─ IDENTIFIER SECTION 2.1033 (c) 1 and 2 APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 MANUFACTURERS IDENTIFIER SECTION 2.1033(c) 1 The full name and mailing address of the manufacturer of the device and the applicant for certification: RESPONSE: APPLICATION: Alcatel-Lucent 600-700 Mountain Avenue Murray Hill, NJ 07974 Attention: Rudolf J Pillmeier SECTION 2.1033(c) 2 FCC Identifier: RESPONSE: “LTE RRH2X40-07L-AT” to be operated under Part 27 of the FCC Rules. FCC Identifier: AS5 FCC ID: AS5BBTRX-06 APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 EMISSIONS, FREQUENCY RANGE, POWER LEVEL SECTION 2.1033 (c) (4), (5), (6) and (7) APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 EMISSIONS, FREQUENCY RANGE, POWER LEVEL SECTION 2.1033(c) (4) Type or types of emission: RESPONSE: The “LTE RRH2x40-07L-AT” capable of amplifying transmission involving the following types of emissions: Measured Emission type: 9M37F9W for 10 MHz Bands 4M68F9W for 5 MHz Bands SECTION 2.1033(c) (5) Frequency Range RESPONSE: FCC 27.5 c (1 ) Block Transmit Frequency Range FCC 27.5(c) (1) MHz Actual Frequency Used in Tests MHz Bandwidth MHz A 728 - 734 729.0 - 734.0 5 B 734 - 740 734.5 – 739.5 5 C 740 - 746 740.0 -745.0 5 A+B 728 - 740 729.5 – 739.5 10 B+C 734 - 746 734.5 – 744.5 10 SECTION 2.1033(c) (6) Range of operating power values or specific operating power levels, and description of any means provided for variation of operating power. RESPONSE: The “LTE RRH2x40-07L-AT” is capable of operating from 0.002 to 40 watts. The output power is measured at the External Antenna Connection (EAC) output connector of the “LTE RRH2x40-07L-AT” cabinet. The power is under continuous software control. The short term peak power due to channel activity fluctuations is 40W +0.3/-1dB. APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 SECTION 2.1033(c) (7) Maximum power rating as defined in the applicable part(s) of the rules. RESPONSE: The maximum average power output of the “LTE RRH2x40-07L-AT” cabinet EAC port is 2x40 watts (MIMO). The radio transmitter is operated under 47 CFR 27. There were 2 External antenna port (EAC) ports and the ports were randomly selected for all antenna port conducted tests.

Global Product Compliance Laboratory MH 5A-115, Alcatel-Lucent 600, Mountain Avenue Murray Hill, NJ 07974-0636 Tel: 908 582 5539 September 24, 2012 Subject: Confidential Treatment for Schematics - FCC ID: AS5BBTRX-0 6 Dear Examiner: Pursuant to 47 CFR 0.457(d) and 47 CFR 0.459 of the FCC Rules, we request that the following documents be kept confidential and be withheld from public inspection. The information contain in these documents which is submitted to the FCC are considered a trade secret and not routinely available to the public. The reason that the material should be withheld from public inspection is that the exhibits listed contain Schematics and parts lists of “LTE 700L RRH” FCC ID: AS5BBTRX-0 6 that are proprietary. This information is not publicly available. Therefore, I would like to request you to treat the following as confidential. (1) Schematics and Parts list (2) Operational description Thank you for your attention in this matter . Sincerely, Dheena Moongilan Distinguished Member of Technical Staff

APPLICANT: Alcatel-Lucent -1 - FCC ID: AS5BBTRX-06 Alcatel-Lucent - Proprietary Use pursuant to Company Instructions. 1 Federal Communications Commission Global Product Compliance Laboratory Office of Engineering and Technology MH 5A-115, Alcatel-Lucent Equipment Authorization Division 600, Mountain Avenue Application Processing Branch Murray Hill, NJ 07974-0636 7435 Oakland Mills Road Columbia, MD 21046 September 24, 2012 Dear Examiner: In accordance with Parts 2, 27 and OET Rules 662911 D01 and D02 of the Commission’s Rules and Regulations, we are submitting herewith, statements and supporting data to show compliance with the requirements of the Commission for Product Certification of the Alcatel-Lucent “LTE RRH2X40-07L- AT”, henceforth ‘RRH’, FCC ID: AS5BBTRX-0 6. The RRH is radio, amplifier and filter combination cabinet systems uses the 3GPP standards Long time Evolution (LTE) technology, for use in Domestic Miscellaneous Wireless Communication Services (WCS). This application for the RRH under FCC ID: AS5BBTRX-0 6, is for operation in the domestic WCS band with a LTE signal. The data summarized below is in the form presently used by the Commission’s Radio Equipment List. Manufacturer Alcatel-Lucent Equipment Identification AS5BBTRX-06 Rules Part Number 27.5(c) (1) and FCC OET Rules 662911 D01 and D02 Frequency Range 729 to 745 MHz (A, B, and C Blocks) Output Power +3 dBm (.002W) to +46dBm (40W) Varied by Software Frequency Tolerance +/- 0.001 ppm Emission Designator 9M37F9W for 10 MHz Bands and 4M68F9W for 5 MHz Bands The RRH, under FCC ID: AS5BBTRX-0 6 is designed to be operated and marketed as RF cabinet system. Each of the RRH contains two identical Transceiver paths and ports. Each transceiver ports outputs 40W maximum of at the External antenna connector (EAC) port. The RRH will be typically operated in Multiple and input and Multiple output (MIMO) mode using 2 x2 antennas. Each Transceiver path is supported by its own RF path filter. The RRH were evaluated total of two transceiver ports. During all antenna port conducted emissions, the transceiver ports were randomly selected for each of the tests. The RRH will be marketed in indoor/outdoor cabinets. APPLICANT: Alcatel-Lucent -2 - FCC ID: AS5BBTRX-06 Alcatel-Lucent - Proprietary Use pursuant to Company Instructions. 2 The RRH is designed operate at large number of sub-carriers which are modulated with QPSK, 16QAM, and 64QAM formats. The RRH was evaluated and data is provided for all three modulation formats. (a) QPSK (b) 16QAM (c) 64QAM The actual power level delivered by the RRH to transmit antenna is under the software control of the Mobile Switching Center of the local Cellular system. The RRH /AS5BBTRX-0 6 is designed and manufactured by Alcatel-Lucent. List of exhibits attached with this submission is indicated in the following page of this cover letter. The attached exhibits contain the technical data, and the required statements and documents for Product Certification. The technical contact at Alcatel-Lucent will comply with any request for additional information should the need arise. Sincerely, Dheena Moongilan Distinguished Member of Technical Staff Global Product Compliance Laboratory phone: (908) 582 5539 email: [email protected] APPLICANT: Alcatel-Lucent -3 - FCC ID: AS5BBTRX-06 Alcatel-Lucent - Proprietary Use pursuant to Company Instructions. 3 List of Exhibits COVER LETTER Cover Letter Product Configuration – Explained in test reports Letter for Confidential Treatment of Exhibits ATTESTATION STATEMENT Section 2.911 (d) Qualifications and Certifications Section 2.1033 (c) (1,2) Manufacturers, FCC Identification Section 2.1033 (c) (4-7) Emissions, Frequency Range, Power Level USERS MANUAL Section 2.1033 (c) (3) Users Manual Section 2.1033 (c) (9) PARTS LIST/TUNE-UP PROCEDURE Tune-Up Procedure Section 2.1033 (c) (13) OPERATIONAL DESCRIPTION Description of Modulation System Section 2.1033 (c) (10) SCHEMATICS Schematic Section 2.1043 (b) (2) Block Diagrams Section 2.1033 (c) (11) and 2.925 (a) (1) ID LABEL/LOCATION INFORMATION Section 2.1033 (c) (12) EXTERNAL PHOTOS INTERNAL PHOTOS Section 2.1033 (c) (12) Internal Photos Section 2.1033 (c) (8) TEST REPORT Measurement of DC Power Section 2.1033 (c) (14) Listing of Required Measurements Section 2.1046 Measurement of Radio Frequency Power Output Section 2.1047 Measurement of Modulation Characteristics Section 2.1049 and Section 24.238 (b) and 27.58 (g) Measurement of Occupied Bandwidth Section 2.1051 Measurement of Spurious Emissions at Antenna Section 2.1053 Field Strength of Spurious Radiation Section 2.1055 Measurement of Frequency Stability Section 2.1057 Frequency Spectrum to be Investigated Test Instruments Used for Test – See Test Reports RF Exposure Information Section 24.51 (c) Human Exposure – Not performed

APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 External Photographs SECTION 2.1033 (c ) 12 APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 Photograph of Front APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 Photograph of Left Side APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 Photograph of Left Side APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 Photograph of Rear APPLICANT: Alcatel-Lucent. FCC ID: AS5BBTRX-06 Photograph of Top

APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 FCC ID Label APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Photograph of FCC ID Label Affixed on RRH2X40-70L APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 FCC ID Label on RRH2x40-70L APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 FCC ID Label Drawing COMCODE : 3JR38017AAAA REV 01 (IJREV: 1) IDEAL JACOBS (XM): ISO 9001:2008, 14001:2004 REGISTERED SPEC DRAWING FOR REFERENCE ONLY (DO NOT USE FOR REPRODUCTION) ORIGINAL ARTWORK USE FOR REPRODUCTION COMPOSITE 4X R1.50 Cust. Rev#: Title: Engineer: XIAYAN Job#:Dwg. Date: ---[P1205110003-1 Client: ASB Materials: Inks: Text: P/N(Comcode):3JR38017AAAA 01 10mil velvet/matte polycarbonate 8B35V (VTM-2) with 3M 467. Subsurface print Black, Safety Yellow, PMS 266C and Cool Gray 1 as per OS20000. Match. Die Strike: .02” 9442 RRH2x40-07L Label All units are in millimeters • Tolerance is: 2 places .25mm • Symbology agrees with: ISO 1101 and ISO 1302 Certifications: Labels shall meet UL and CSA requirements where applicable. Vendor must be UL and/or CSA approved. Documentation verifying the vendor’s certifications for the material shall be provided by the vendor with each package/container. Labels are RoHS compliant. Ideal Jacobs Corporation • 515 Valley Street • Maplewood, NJ 07040 • 973-275-5100 • FAX: 973-275-5161 • email: [email protected] Ideal Jacobs (Xiamen) Corporation • 319 East Hubin Road • Xiamen, Fujian 361012 • 0592-506-4000 • FAX: 0592-507-4000 • email: [email protected] 0.00 0.00 35.00 85.00 IJREVDESCRIPTIONDATECHECKEDDRAWNDATEAPPROVED 1Initial release. ---CLJX05-31-12--- For Operating Temperature Ratings Reference The Site Preparation Document RRH2x40-07L-AT 3JR38017AAAA FCC ID:AS5BBTRX-06 SD-2R737-01 RRH2x40-07L-AT FCC ID:AS5BBTRX-06 SD-2R737-01 Type 4 Enclosure Enclosure Rating: IP 65 2x40W-700MHz, -48V 10A SELV Source IJC Manufactured by Alcatel-Lucent For Operating Temperature Ratings Reference The Site Preparation Document 3JR38017AAAA Type 4 Enclosure Enclosure Rating: IP 65 2x40W-700MHz, -48V 10A SELV Source IJC Manufactured by Alcatel-Lucent

APPLICANT: Alcatel-Lucent INTERNAL PHOTOGRAPHS FCC ID: AS5BBTRX-06 Alcatel-Lucent -Proprietary Figure 1 RRH2x40_07L-AT from top side, showing Tx/Rx antenna and Tx Monitor connections Alcatel-Lucent -Proprietary Figure 2 RRH2x40_07L-AT from bottom side, showing control and power connections Alcatel-Lucent -Proprietary Figure 3 RRH2x40_07L-AT internal showing, full view Filter TRX PSU PA Module Alcatel-Lucent -Proprietary Figure 4 RRH2x40_07L-AT internal showing PA Module Filter RF Connector RF Connector PA Connector Filter RF Connector Alcatel-Lucent -Proprietary Figure 5 RRH2x40_07L-AT internal showing TRX and PSU ALARM ALARM Power Input AUX Cable RF Connector RF Connector Filter RF Connector RF Connector Alcatel-Lucent -Proprietary

APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 TEST REPORT APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 MEASUREMENT PER SECTION 2.1033 (C) (14) OF THE RULES SECTION 2.1033 (c) (14) The data required by Section 2.1046 through 2.1057, inclusive, measured in accordance with the procedures set out in Section 2.1041. RESPONSE: The following pages include the data required for the AS5BBTRX-0 6, measured in accordance with the procedures set out in Section 2.1033 (c) (14) of the Rules. Each required measurement and its corresponding exhibit number are: Measurement: 1 Section 2.1046 RF Power Output - See Measurement 3 Measurement: 2 Section 2.1047 Modulation Characteristics Measurement: 3 Section 2.1049 (a) Emissions Bandwidth (b) Occupied Bandwidth Measurement: 4 Section 2.1051 Spurious Emissions at Antenna Terminals Measurement: 5 Section 2.1053 Field Strength of Spurious Radiation Measurement: 6 Section 2.1055 Measurement of Frequency Stability Section 2.1057 Frequency Spectrum to be Investigated APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Measurement 1 FCC Section 2.1046 RF Power output Refer to Measurement 3 Occupied Bandwidth Measurement during that measurement RF Output was continuously monitored. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Measurement 2 FCC Section 2.1047 Modulation Characteristics APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 The modulation techniques used are explained in the submission as part section 2.1033 (c) (13). The RF signal at the antenna port was demodulated and verified for correctness of modulation signal used before each test was performed. The attached plot of graphs shows the modulation components: In phase (I) and Quadrature (Q) components. (1) Quadrature Phase Shift Keying (QPSK) modulation scheme uses 2 bits transmitted simultaneously (one per channel) and a symbol can be represented by 2 bits. Therefore there are 2 2 = 4 states (Binary 00 to 11). The theoretical bandwidth is 2bits/second/Hz. (2) 16 Quadrature amplitude modulation (QAM): In 16QAM, there are 16-states. There are four I values and four Q values. Therefore, 4 bits are available to represent a symbol. Therefore there are 2 4 = 16 states (Binary 0000 to 1111). The theoretical bandwidth is 4bits/second/Hz. (3) 64 Quadrature amplitude modulation (QAM): In 64QAM: The 64QAM is similar to 16QAM and there will be 64 states and 6 bits are available to represent a symbol. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 QPSK MODULATION APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 LTE-ATT CR RRH 2x40-700 Lower-ATT FCC Part 27.53 Block B+C; QPSK Modulation; PWR: 40 (2x40W MIMO) FCCID: AS5BBTRX-06 TEST ENGINEER: SEG APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 16QAM MODULATION APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 LTE-ATT CR RRH 2x40-700 Lower-ATT FCC Part 27.53 Block B+C; 16QAM Modulation; PWR: 40 (2x40W MIMO) FCCID: AS5BBTRX-06 TEST ENGINEER: SEG APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 64QAM MODULATION APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 LTE-ATT CR RRH 2x40-700 Lower-ATT FCC Part 27.53 Block B+C; 64QAM Modulation; PWR: 40 (2x40W MIMO) FCCID: AS5BBTRX-06 TEST ENGINEER: SEG APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Measurement 3 FCC Section 2.1049 (a) Emissions Bandwidth Measurement (b) Occupied Bandwidth Measurement showing spurious Emissions 100 kHz close to Block edges. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Spectrum Bandwidth Measurement For Emissions Type FCC approves two measurement methods for Spectrum Bandwidth. (A) 99% Bandwidth (B) 26 dB Band width. Both methods were used to measure the bandwidth at modulations and highest is recorded. The modulations used are: 1. QPSK 2. 16 QAM 3. 64 QAM Highest Bandwidth is used for Emissions type designation: 9.37 MHz for 10 MHz Bandwidth, and 4.68 MHz for 5 MHz Bandwidth. Therefore: Measured Emission type: 9M37F9W for 10 MHz Bandwidth. Measured Emission type: 4M68F9W for 5 MHz Bandwidth. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 MEASUREMENT OF OCCUPIED BANDWIDTH (A) 99% POWER BANDWIDTH Reviewed By: DDM Date: 9/13/2012 APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 MEASUREMENT OF OCCUPIED BANDWIDTH For Emissions Type The emissions bandwidth is not provided in section 27.53 for 700 MHz bands. The occupied bandwidth of the LTE RRH2X40-07L-AT was measured using the Rohde & Schwarz ESI Spectrum analyzer/Receiver designed to measure 99% power bandwidth. The measurements were made on blocks A, A+B, B, B+C, and C of the LTE RRH2X40-07L-AT with 5 MHz and 10 MHz bandwidths. The measurements were made on a “ LTE RRH2X40-07L-AT” cabinet in the following modulation configurations: 1. QPSK 2. 16 QAM 3. 64 QAM This measurement also determines emission type. Results: The plots are provided for QPSK, 16QAM and 64QAM modulations of 5 MHz and 10 MHz band of the LTE RRH2X40-07L-AT. The Measured 99% power bandwidth is 8.94 MHz for 10 MHz band and 4.48 MHz for 5 MHz band. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Block: A 5 MHz Bandwidth 729 – 734 MHz (99% Power Bandwidth) APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 A UnitdBm 1RM RF Att 10 dBRBW 30 kHz VBW 300 kHz SWT 28 ms IN1 51 dB Offset Ref Lvl 46 dBm Ref Lvl 46 dBm 1 MHz/Center731.5 MHzSpan10 MHz 1AVG -50 -40 -30 -20 -10 0 10 20 30 40 -54 46 1 T1 T2 Marker 1 [T1] 24.23 dBm 732.81262525 MHz 1 [T1] 24.23 dBm 732.81262525 MHz OPB 4.48897796 MHz T1 [T1] 22.26 dBm 729.26553106 MHz T2 [T1] 23.30 dBm 733.75450902 MHz Title: 99% POWER BANDWIDTH; Test Engineer: SEG Comment A: LTE-AT CR RRH 2X40-700 Lower ATT; BLK A; 729 - 734 MHz PWR: 40W; QPSK; FCC Prt 27.53; FCCID: AS5BBTRX-06 Date: 14.AUG.2012 07:58:56 APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 A 1RM UnitdBm 51 dB Offset 1 MHz/Center731.5 MHzSpan10 MHz RBW 30 kHz SWT 28 ms VBW 300 kHz IN1 Ref Lvl 46 dBm Ref Lvl 46 dBm RF Att 10 dB 1AVG -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 -74 46 1 T1 T2 Marker 1 [T1] 23.54 dBm 732.09118236 MHz 1 [T1] 23.54 dBm 732.09118236 MHz OPB 4.46893788 MHz T1 [T1] 21.81 dBm 729.26553106 MHz T2 [T1] …

Text truncated - open the document above for the full version.