AS5BBTRX-10AMetroCell Outdoor WiFi Access Point

APPLICANT: Alcatel-Lucent EXHIBIT 3 FCC ID: AS5BBTRX-10A Page 1 of 1 EXHIBIT 3 Section 2.1033 (b)(3) INSTALLATION AND OPERATING INSTRUCTIONS A copy of the installation and operating instructions to be furnished to the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to the FCC when it becomes available. Response A copy of the operation and installation manual for 9764 Metro Cell Outdoor Wi-Fi Access Point is attached to this exhibit. Titlepage Alcatel-Lucent9764 MetroCellOutdoorWi-FiAP OperationandInstallation 3MN-WiFi-AP Issue1.01 | November2013 Alcatel-Lucent–Internal Proprietary–UsepursuanttoCompanyinstruction Proprietary UsepursuanttoCompanyinstruction Legalnotice Legalnotice Alcatel,Lucent,Alcatel-LucentandtheAlcatel-LucentlogoaretrademarksofAlcatel-Lucent.Allothertrademarksarethepropertyoftheirrespective owners. Theinformationpresentedissubjecttochangewithoutnotice.Alcatel-Lucentassumesnoresponsibilityforinaccuraciescontainedherein. Copyright©2013Alcatel-Lucent.Allrightsreserved. Containsproprietary/tradesecretinformationwhichisthepropertyofAlcatel-Lucentandmustnotbemadeavailableto,orcopiedorusedbyanyoneoutside Alcatel-Lucentwithoutitswrittenauthorization. Proprietary UsepursuanttoCompanyinstruction Alcatel-Lucent–Internal Proprietary–UsepursuanttoCompanyinstruction Contents Aboutthisdocument Purpose .............................................................................................................................................................................................xixi Reasonforreissue ........................................................................................................................................................................xixi Supportedsystems ........................................................................................................................................................................xixi Howtousethisdocument .........................................................................................................................................................xixi Safetyinformation ........................................................................................................................................................................xixi Prerequisites ..................................................................................................................................................................................xiixii Conventionsused ........................................................................................................................................................................xiixii Documentsupport ......................................................................................................................................................................xivxiv Technicalsupport .......................................................................................................................................................................xivxiv Howtoorder ................................................................................................................................................................................xivxiv Howtocomment ........................................................................................................................................................................xivxiv 1Safetystatements Overview ......................................................................................................................................................................................1-11-1 Structureofsafetystatements ...............................................................................................................................................1-21-2 Safety ...........................................................................................................................................................................................1-41-4 Safety-specifichazards .........................................................................................................................................................1-51-5 Productsafety .............................................................................................................................................................................1-71-7 29764MCOWi-FiAccessPoint Overview ......................................................................................................................................................................................2-12-1 Functionaldescription .............................................................................................................................................................2-22-2 Physicaldescription .................................................................................................................................................................2-52-5 Systemarchitecture ..................................................................................................................................................................2-92-9 .................................................................................................................................................................................................................................... 9764MCOWi-FiAP 3MN-WiFi-AP Issue1.01 November2013 Alcatel-Lucent–Internal Proprietary–UsepursuanttoCompanyinstruction iii 3Installationofthe9764MCOWi-FiAP Overview ......................................................................................................................................................................................3-13-1 Procedure3-1:Attach9764MCOWi-FiAPmoduleto9764MCOmodule .....................................................3-23-2 LEDstatedescription-9764MCOWi-FiAP …

Text truncated - open the document above for the full version.

- 1 - Alcatel-Lucent USA Rm. 28-114H 600-700 Mountain Ave. PO Box 636 Murray Hill, NJ 07974 November 14, 2013 Timco Engineering Inc. Telecommunication Certification Bodies 849 NW State Road 45 Newberry, Florida 32669 Subject: Application for Original Equipment Certification under FCC ID: AS5BBTRX-10A for 9764 MetroCell Outdoor (MCO) Access Point (AP) Module, Operating in the, 2400-2483.5MHz DTS band (Digital Transmission Systems) and 5725-5825MHz UNII-3 band (Unlicensed National Information Infrastructure Devices). Dear Examiner: In accordance with Parts 2 and 15 of the Commission’s Rules and Regulations, we are submitting herewith statements and supporting data to show compliance with the requirements of the Commission for the certification of the Alcatel-Lucent 9764 LightRadio™ MetroCell AP Module, henceforth Wi-Fi AP, under FCC ID AS5BBTRX-10A, for operation in the domestic 2400-2483.5MHz DTS band and 5725-5825MHz UNII-3 band. . The 9764 MCO Wi-Fi AP module is an optional component attached to a 9764 MetroCell Outdoor, a small base station, in public places for high-density hotspots. The Wi-Fi AP is a plug-in module and is installed on the bottom of the 9764 MetroCell. The WiFi AP gets its DC power source from the MetroCell through an interface connector between MetroCell and WiFi AP. The WiFi AP has two Tx/Rx ports which support MIMO (Multiple Input Multiple Output) operation. It has a choice for installing two different types of antenna modules: high-gain antenna module and medium-gain antenna module. Each antenna module consists of a 2.4GHz antenna and a 5GHz antenna. Each antenna has two built-in ports and two antenna elements where two antenna elements are connected to Tx/Rx Port 1 and Tx/Rx Port 2, respectively. The data summarized below is in the form presently used by the Commission’s Radio Equipment List. Manufacturer Alcatel-Lucent, Inc. Equipment Identification AS5BBTRX-10A Rules Part Number Part 15C and 15E Frequency Range Transmit: 2400-2483.5MHz DTS band and 5725-5825MHz UNI I band. Conducted Output Power 0-22dBm per chain and 3-25dBm total for 2.4 DTS Band 0-18dBm per chain and 3-21dBm total for 5.8GHz UNII-3 Band Max EIRP Power -2-28dBm per chain and 1-31dBm total for 2.4 DTS Band -2-26dBm per chain and 1-29dBm total for 5.8GHz UNII-3 Band Enclosed in this application package are the FCC Application Form 731, letter of Request for Confidentiality, Table of Contents and the required exhibits. These exhibits contain the technical data and the required

APPLICANT: Alcatel-Lucent TABLE OF CONTENTS FCC ID: AS5BBTRX-10A Page 1 of 1 TABLE OF CONTENTS Exhibit 1 Section 2.911 (d) Certifications and Qualifications Exhibit 2 Section2.1033 (b) (1, 2) Manufacturer, Applicant and Identifier. Exhibit 3 Section 2.1033 (b)(3) Installation and Operating Instructions Exhibit 4 Section 2.1033 (b)(4) Description Of Circuit Functions, Operation, Ground System and Antenna of the Device -> Confidential Exhibit 5 Section 2.1033 (b)(5) Circuit Schematic Diagrams -> Confidential Exhibit 6 Section 2.1033 (b)(5) Block Diagram -> Confidential Exhibit 7 Section 2.1033 (b)(7) Equipment Identification Label Exhibit 8 Section 2.1033 (b) (7) Photograph of the Equipment Exhibit 9 Section 2.1033 (b) (6) Test Report Part 15 Subpart C 15.247 Test Report for 2.4GHz Part 15 Subpart E 15.407 Test Report for 5.8GHz UNII-3 Exhibit 10 Section 1.1310 RF Exposure Assessment Exhibit 11 Setup Drawings or Photographs

APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 1 of 5 EXHIBIT 8 Section 2.1033 (b)(7) PHOTOGRAPHS OF THE EQUIPMENT Photographs (8 x 10) of the equipment of sufficient clarity to reveal exterior overall appearance, the construction, the antenna used with device (if any), the controls available to the user, the component placement on the chassis, and the chassis assembly. Smaller photographs may be submitted provided they are sharp and clear, show the necessary detail, and are mounted on 8.5×11 inch paper. Response The following pages contain the required external photographs of the AS5BBTRX-10A MCO Wi-Fi AP, subject of this application. Seven photos in total were submitted, which include: 1) External Front Top View of MCO Wi-Fi AP with Higher Gain Antenna 2) External Back Bottom View of MCO Wi-Fi AP with Higher Gain Antenna 3) External Left Bottom Views of MCO Wi-Fi AP with Higher Gain Antenna 4) External Front Top View of MCO Wi-Fi AP with Lower Gain Antenna 5) External Front Bottom View of MCO Wi-Fi AP with Lower Gain Antenna 6) External Back Bottom View of MCO Wi-Fi AP with Lower Gain Antenna 7) External Left Bottom View of MCO Wi-Fi AP with Lower Gain Antenna APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 2 of 5 External Back Bottom View of MCO Wi-Fi AP with Higher Gain Antenna External Front Top View of MCO Wi-Fi AP with Higher Gain Antenna APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 3 of 5 External Left Bottom Views of MCO Wi-Fi AP with Higher Gain Antenna External Front Top View of MCO Wi-Fi AP with Lower Gain Antenna APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 4 of 5 External Front Bottom View of MCO Wi-Fi AP with Lower Gain External Back Bottom View of MCO Wi-Fi AP with Lower Gain APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 5 of 5 External Left Bottom View of MCO Wi-Fi AP with Lower Gain

APPLICANT: Alcatel-Lucent EXHIBIT 7 FCC ID: AS5BBRTX-10A Page 1 of 2 EXHIBIT 7 Section 2.1033 (b)(7) EQUIPMENT IDENTIFICATION LABEL Photographs (8 x 10) of the equipment of sufficient clarity to show the required identification label in sufficient detail so that the name and FCC identifier can be read. In lieu of a photograph of the label, a sample label (or facsimile thereof) may be submitted together with a sketch showing where this label will be placed on the equipment. Smaller photographs may be submitted provided they are sharp and clear, show the necessary detail, and are mounted on 8.5×11 inch paper. A sample label or facsimile together with the sketch showing the placement of this label shall be on the same size paper. Response A photograph of the FCC identification label to be affixed is provided below. In addition, the sample FCC label together with the sketch showing the possible placement of this label are attached to this exhibit. and the drawing of the equipment identification label to be affixed. WiFi AP Product Label Specification Alcatel-Lucent - Confidential - Solely for authorized persons having a need to know - Proprietary - Use only pursuant to Company instruction 3BK61060AAAA DSZZA Ed02 Draft 5-Sep-13 Page 15/19 Picture for reference only: Photo of WiFi AP enclosure with Regulatory Label, FCC Label attached WiFi AP Product Label Specification Alcatel-Lucent - Confidential - Solely for authorized persons having a need to know - Proprietary - Use only pursuant to Company instruction 3BK61060AAAA DSZZA Ed02 Draft 5-Sep-13 Page 6/19 3.3 FCC-Label Note: This label should be printed by a label vendor Material according to chapter 5.2 should be used. FCC-Label (size 35 x 20 mm) Alcatel-Lucent logo: 6mm height FCC-ID : 12 digits alphanumeric 3.4 Unit Identifier Label Note. This label should be printed by manufacturing site. Material according to chapter 5.1 shall be used. 3.4.1 Unit Identifier Label for Medium-gain WiFi-AP for USA Unit Identifier Label 1a (US Label) (size 30 x 50 mm) Alcatel-Lucent logo: 5mm height Customer: ID.......10 digits numeric Name of Model: 9764 MCO Wi-Fi AP v1.0 MG Part No.+ICS: 12 digits alphanumeric +2 for ICS Lock / Unlock mode icon Serial-No.: 18 digits alphanumeric MAC@: 12 digits alphanumeric CLEI code: 10 digits alphanumeric Data matrix: with Cust.ID, PN+ICS, SN, MAC@,CLEI Customer: ID Model: Part No: Serial No: Mac@: CLEI code: 9764 MCO Wi-Fi AP v1.0 MG 3BK60912AAAA 01 XXXXXXXXXXXXXXXXX XXXXXXXXXXXX CRG2AKCCAA FCC ID: AS5BBTRX-10A WiFi AP Product Label Specification Alcatel-Lucent - Confidential - Solely for authorized persons having a need to know - Proprietary - Use only pursuant to Company instruction 3BK61060AAAA DSZZA Ed02 Draft 5-Sep-13 Page 14/19 6 POSITION OF LABEL ON PRODUCT See placements per Assembly drawing

APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 1 of 4 EXHIBIT 8 Section 2.1033 (b)(7) PHOTOGRAPHS OF THE EQUIPMENT xxx Photographs (8 x 10) of the equipment of sufficient clarity to reveal the construction, the antenna used with device (if any), the controls available to the user, the component placement on the chassis, and the chassis assembly. Smaller photographs may be submitted provided they are sharp and clear, show the necessary detail, and are mounted on 8.5×11 inch paper. Response The following pages contain the required photographs of the AS5BBTRX-10A MCO Wi-Fi AP, subject of this application, showing its internal views. Five internal photos in total without radom are submitted, which include: 1) Internal View of MCO Wi-Fi AP with Medium Gain Antennas 2) Internal View of MCO Wi-Fi AP with High Gain Antennas 3) Back Side View of Medium Gain Antennas 4) Back Side View of High Gain Antennas 5) Internal View of MCO Wi-Fi AP Module Circuit Board with Antennas Removed APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 2 of 4 Internal View of MCO Wi-Fi AP with Medium Gain Antennas Internal View of MCO Wi-Fi AP with High Gain Antennas APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 3 of 4 Side View of Medium Gain Antennas Back Side View of High Gain Antennas APPLICANT: Alcatel-Lucent EXHIBIT 8 FCC ID: AS5BBTRX-10A Page 4 of 4 Internal View of MCO Wi-Fi AP Module Circuit Board with Antennas Removed

APPLICANT: Alcatel-Lucent EXHIBIT 10 FCC ID: AS5BBTRX-10A Page 1 of 2 EXHIBIT 10 RF EXPOSURE ASSESSMENT Section 15.247(i) RF Exposure Requirement for 2.4GHz DTS Device Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See 1.1307(b)(1) of this chapter. Section15.407(f) RF Exposure Requirement for 5GHz UNII Device U-NII devices are subject to the radio frequency radiation exposure requirements specified in 1.1307(b), 2.1091 and 2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a “general population/uncontrolled” environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. Section 1.1310 Radio Frequency Radiation Exposure Limits The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Section 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of § 2.1093 of this chapter. Further information on evaluating compliance with these limits can be found in the FCC’s OST/OET Bulletin Number 65, ‘‘Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation.’’ Response The 9764 MCO Wi-Fi AP module is mounted to the underside of the 9764 MCO LTE/WCDMA module. The 9764 MCO is typically installed in fixed locations with three options: pole mounted, wall mounted or floor mounted via floor stand. Therefore, the 9764 MCO Wi-Fi AP is thus neither a portable nor a mobile wireless device. The limits specified in Section 1.1310 Table 1 (B) for general population/uncontrolled exposure, which are tabulated below, shall be met. Table 10.1 Limits for General Population/Uncontrolled Exposure (Section 1.1310 Table 1 (B)) Frequency Range (MHz) Electric Field Strength (E) (V/m) Magentic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Average Time |E| 2 , |H| 2 or S (minutes) 0.3 - 1.34 614 1.63 (100)* 1.34 - 30 824/f 2.19/f (180/f)* 30 - 300 27.5 0.073 0.2 30 300 - 1500 F/1500 1500 – 100,000 1.0 Note: f = frequency om MHz; *Plane-wave equavalent power density. The 9764 MCO Wi-Fi AP operates in the frequency 2.4GHz or 5GHz. The maximum power density needs to be less than 1.0 mW/cm 2 . APPLICANT: Alcatel-Lucent EXHIBIT 10 FCC ID: AS5BBTRX-10A Page 2 of 2 Per FCC’s OST/OET Bulletin Number 65, the appropriate EIRP (equivalent or effective isotropically radiated power) limits can be calculated based on the relationship between power density and EIRP, i.e., 2 4R EIRP S   , (1) where S is the power density in mW/cm 2 , R is the distance to the center of radiation of the antenna in cm and EIRP is in mW. There are two different types of antenna modules equipped for this AP product: high-gain antenna module and medium-gain antenna module. Each antenna module consists of a 2.4GHz antenna and a 5GHz antenna. Each antenna has two built-in ports and two antenna elements for 2x2MIMO. The power level for the Wi-Fi AP with the lower gain antennas is equal or lower than the Wi-Fi AP with higher gain antennas. The maximum EIRP for both 2.4GHz and 5.8GHz bands can be found from the test reports presented in Exhibit 9, respectively. The minimum RF safety safety distance thus can be calculated from the above equation 1 in accordance with Maximum Permissible Exposure (MPE) requirement. Table 10.2 Minimum RF Safety Distances Freq Band Antenna Maximum Total EIRP (dBm) Maximum Total EIRP (mW) Limit of Power Density S (mW/cm 2 ) RF Safety Distance (cm) 2.4 GHz MG 29.7 933 1 8.6 HG 31.1 1288 1 10.1 5.8 GHz MG 27.3 537 1 6.5 HG 29.2 832 1 8.1 Therefore, the minimum RF safety distance for the 9764 MCO Wi-Fi AP is 9cm for with medium-gain antenna and 10cm for with high-gain antenna module.

APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 EXHIBIT 9 Section 2.1033 (b)(6) TEST REPORT A report of measurements showing compliance with the pertinent FCC technical requirements. This report shall identify the test procedure used (e.g., specify the FCC test procedure, or industry test procedure that was used), the date the measurements were made, the location where the measurements were made, and the device that was tested (model and serial number, if available). The report shall include sample calculations showing how the measurement results were converted Response A test report for 5.8GHz UNII-3 is attached. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 - 2 - CERTIFICATION TEST REPORT OF FCC PART 15 SUBPART E Applicant Alcatel-Lucent, Inc. FCC ID AS5BBTRX-10A Product Name MetroCell Access Point Module Model Name 9764 MCO Wi-Fi AP V1.0 Test Standard(s) 47 CFR FCC Part 15 Subpart E, Section 15.407 Test Frequency Range 5725-5825 MHz Test Date February 22 – November 14, 2013 Submission Type Original Equipment Operating Mode(s) Master of U-NII Device Test Report Number 2012-0268 FCC 5.8GHz UNII-3 Test Laboratory Global Product Compliance Laboratory 600-700 Mountain Avenue Room 5B-108 Murray Hill, New Jersey 07974-0636 USA Note: The test results documented in this report refer exclusively to the test model/sample specified, under the conditions and modes of operation as described herein. This report shall not be reproduced, in whole or in part without the approval of Alcatel-Lucent Global Product Compliance Laboratory. This report must not be used by the recipient to claim product endorsement by NVLAP or any other agency of the U.S. Government. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 - 3 - TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS 4 2. SUMMARY OF TEST RESULTS 6 3. GENERAL INFORMATION 7 3.1 Product Descriptions 3.2 Accessories 3.3 Antenna Information 4. REQUIRED MEASUREMENTS AND RESULTS 9 4.1 Regulatory Requirements Limits 4.2 UNII-3 Band Carrier Frequencies 4.3 Test Configurations and Setup 4.4 Measurement Required: Occupied Bandwidth ─ FCC Section 15.407 (a)(3) 4.5 Measurement Required: Maximum Power Output ─ FCC Section 15.407 (a)(3)(4) 4.6 Measurement Required: Peak Power Spectrum Density ─ FCC Section 15.407 (a)(3)(5) 4.7 Measurement Required: Peak Excursion ─ FCC Section 15.407 (a)(3)(6) 4.8 Measurement Required: Unwanted Out-Of-Band Emissions ─ FCC Section 15.407 (b)(4) 4.9 Measurement Required: Unwanted Radiated Emissions ─ FCC Section 15.407 (b)(6,7) 4.10 Measurement Required: Frequency Stability ─ FCC Section 15.407 (g) 4.11 Measurement Required: AC Power Line Conducted Emissions ─ FCC Section 15.407 (b)(6) and 15.207 5. LIST OF TEST EQUIPMENT 53 6. FACILITIES AND ACCREDEITATION 55 APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 - 4 - 1. ATTESTATION OF TEST RESULTS Company Name Alcatel-Lucent, Inc. FCC ID AS5BBTRX-10A Product Name MetroCell Access Point Module Model Name 9764 MCO Wi-Fi AP V1.0 Serial Number LBALLU-RT124600209 (Conducted) LBALLU-RT131980172 (conducted) LBALLU-RT131380091 (Frequency Stability) LBALLU-RT131980174 (Radiated) LBALLU-RT131980277 (Radiated) Part No 3BK60912AAAB ICS01 REV 04 (Medium Gain) 3BK60926AAAB ICS01 REV 04 (High Gain) Test Standard(s) 47 CFR FCC Part 15 Subpart E, Section 15.407 Reference(s)  FCC Part 15 Subpart E §15.407  FCC KDB 789033, Measurement Guidelines for U-NII Device Part 15 Subpart E, v01r03, April 8, 2013.  FCC KDB 662911D01, Emissions Testing of Transmitters with Multiple Outputs in the Same Band, 4/8/2013, v02 Test Frequency Range 5725-5825 MHz Date Tested February 22 – November 14, 2013 Operating Mode(s) Master of U-NII Device Test Laboratory Global Product Compliance Laboratory Alcatel-Lucent USA, Inc 600-700 Mountain Avenue Room 5B-108 Murray Hill, New Jersey 07974-0636 USA The above product has been evaluated and found to be in compliance with the Commission’s Rules and Regulations set forth in the above standards. The data and the descriptions about the test setup, procedures and configuration presented in this report are accurate. Note: Alcatel-Lucent Global Product Compliance Laboratory represents to the client that testing was done in accordance with standard procedures as applicable, and that reported test results are accurate within generally accepted commercial ranges of accuracy in accordance with the scope of our NVLAP Accreditation. Alcatel-Lucent Global Product Compliance reports only apply to the specific samples APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 - 5 - tested. This report is the property of the client. This report shall not be reproduced except in full without the written approval of the Alcatel-Lucent Global Product Compliance Laboratory. Alcatel-Lucent Global Product Compliance Laboratory is accredited with the US Department of Commerce National Institute of Standards and Technology's National Voluntary Laboratory Accreditation Program (NVLAP) for satisfactory compliance with criteria established in Title 15, Part 7 Code of Federal Regulations for offering test services for selected test methods in Electromagnetic Compatibility; Voluntary Control Council for Interference (VCCI), Japan; Australian Communications and Media Authority (ACMA). The laboratory is ISO 9001:2008 Certified. APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 - 6 - 2. SUMMARY OF TEST RESULTS Applied Standards: 47 CFR FCC Part Subpart E Section 15.407 Section Description of Tests Results In Compliance 4.4 Occupied Bandwidth Yes 4.5 Maximum power output Yes 4.6 Peak Power Spectrum Density Yes 4.7 Peak Excursion Yes 4.8 Unwanted Out-of-Band Emissions Yes 4.9 Unwanted Radiated Emissions Yes 4.10 Frequency Stability Yes 4.11 AC Power Line Conducted Emissions Yes APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-10A 5.8GHz UNII-3 - 7 - 3. GENERAL INFORMATION 3.1. Product Descriptions Table 3.1.1 Product Specifications Specification Items Descripti…

Text truncated - open the document above for the full version.

APPLICANT: Alcatel-Lucent EXHIBIT 11 FCC ID: AS5BBTRX-10A Page 1 of 2 EXHIBIT 11 Setup Drawings or Photographs ANSI C63.4 Section 10.2.3 Equipment and cable arrangement The setup of the equipment and cable or wire placement on the test site that produces the highest radiated and the highest ac power-line conducted emissions shall be clearly shown and described. Drawings or photographs may be used for this purpose (see 10.2.12). A block diagram or photo showing the interconnection of the major functional units is also useful. ANSI C63.4 Section 10.2.12 Test report appendixes The test report shall contain photographs or detailed sketches of the EUT configuration and arrangement, showing sufficient information to allow the EUT to be reconfigured and arranged in a manner that would allow the original test to be replicated, with a high likelihood that the test results would be in agreement with the results of the original test within acceptable tolerances. Response Per ANSI C63.4, either the drawings or the photos on the test setup need to be provided. The setup drawings or diagrams have been provided in Exhibit 9 Test Report Section 4.3. The setup photos for radiated measurement and conducted emissions test at antenna terminals are provided below as well. Figure 11.1 Setup Photo of Radiated Emissions Test APPLICANT: Alcatel-Lucent EXHIBIT 11 FCC ID: AS5BBTRX-10A Page 2 of 2 Figure 11.2 Setup Photo of Conducted Emissions Test at Antenna Ports. Figure 11.3 Setup Photo of Conducted Emissions Test at Power Ports.