ASU-REMB2JBSavant Remote B2

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 1 of 2 RF_754_02 15-02-2023 Savant Systems, Inc. U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Savant Systems, Inc. FRN: 0018210674 Grantee Code: ASU Contact person name: Peter Corsini Agent name: Savant Systems, Inc. Street address: 45 Perseverance Way, ZIP/City/State Hyannis, Massachusetts, United States 02601 Telephone number: 508-683-2500 Email address: [email protected] Signature Contact person*: Date: 16.8.2026 Signature Agent*: Date: 16.8.2026 Note *Must be signed by both the applicant, and agent on behalf

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_03 06-06-2024 Savant Systems, Inc. Certification Application Attestation Statements < Savant Systems, Inc.> <FRN:> 0018210674 <adress> 45 Perseverance Way, Hyannis, Massachusetts <ZIP / Postcode> 02601 <city> <country> United States Subject: FCC ID: < ASU-REMB2JB> To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) [Savant Systems, Inc.] certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) [Savant Systems, Inc.] (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2026.7.16 City: Hyannis Name (2) : Peter Corsini Function: VP of Hardware Engineering Telephone number: 508-683-2500 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK”

RF_160_06 Declaration of Authorisation Date of issue 13-05-2025 (On manufacturer’s company letter heading) Declaration of Authorization We Name: Savant Systems, Inc. Address: 45 Perseverance Way, Hyannis, Massachusetts City: Hyannis Country: United States Declare that: Name Representative of agent: Gao Han (1) Agent Company name: DEKRA Testing and Certification (Shanghai) Co., Ltd. Address: 8F, No. 250, Jiangchangsan Road, 200436 City: Shanghai Country China is authorized to apply for Certification of the following product(s): Product description: Savant Remote B2 Type designation: REM-B2JB-00 Trademark: Savant Validity/ expiry date on our behalf. Date: 2026.7.16 City: Hyannis Name: Peter Corsini (2) Function: VP of Hardware Engineering Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 1 of 2 Company Name: Savant Systems, Inc. Address : 45 Perseverance Way, Hyannis, Massachusetts City: Hyannis Country: United States To: Kiwa Nederland B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: ASU-REMB2JB Reference number: 6268694 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Sensitive commercial information, request confidentiality Date: 2026.7.13 Name and signature of applicant: Peter Corsini Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

ICASA Mark reserved area: 19 x 9.5 mm Laser engraving, gray characters Certification number character height: 1.0 mm Production date: YYDDDCHMZ YY = Year DDD = Day of year CHXX = Changhong code used internally by GE Laser engraving QR code size: 7.5 x 7.5 mm Laser engraving Character height: 1.1 mm

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2660675R.701A FCC TEST REPORT Product Name Savant Remote B2 Model and /or type reference REM-B2JB-00 Trademark Savant FCC ID ASU-REMB2JB Applicant ́s name / address Savant Systems, Inc. 45 Perseverance Way, Hyannis, Massachusetts, United States 02601 Test method requested, standard 47 CFR FCC Part 2 (Section 2.1093) IEEE Std 1528-2013 ANSI C95.1-2019 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao / Project Manager Approved by (name / position & signature) Frank He / Technical Manager Date of issue 2026-08-05 Report Version V1.0 Report template No Template_FCC SAR-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2660675R.701A Page 2 / 38 INDEX page General conditions ........................................................................................................................................ 3 Document History ....................................................................................................................................................... 4 Statement of Compliance ............................................................................................................................................ 5 Used Equipment ......................................................................................................................................................... 6 Uncertainty ................................................................................................................................................................. 7 1 General Information.......................................................................................................................................... 10 2 SAR Measurements System Configuration ....................................................................................................... 14 3 Tissue Simulating Liquid................................................................................................................................... 24 4 System Check .................................................................................................................................................. 26 5 Test Configuration ............................................................................................................................................ 29 6 Description of Test Position .............................................................................................................................. 30 7 Test Result ....................................................................................................................................................... 32 8 SAR Validation Data......................................................................................................................................... 35 9 SAR Test Data ................................................................................................................................................. 36 10 Calibration Certificate ....................................................................................................................................... 37 11 Test Setup Photo ............................................................................................................................................. 38 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2660675R.701A Page 3 / 38 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Test Facility A2LA (Certificate No. 3235.01) CNAS (Certificate No. L5313) FCC - Designation Number: CN1199 Test Firm Registration Number: 566524 ISED - CAB identifier: CN0040 IC#: 4075B Date (receive sample) Jun. 25, 2026 Date (start test) Jul. 09, 2026 Date (finish test) Jul. 09, 2026 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. 5. The measurement result is considered in conformance with the requirement if it is within the prescribed limit, it is not necessary to account the uncertainty associated with the measurement result. DEKRA Te…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Shanghai) Ltd. No.250, Jiangchangsan Rd, Jingan District, Shanghai, 200436, People’s Republic of China TEL: +86-21-6056 7666 / FAX: +86-21-6056 7555 Test report No: 6268677.50 US FCC & Canada ISED TEST REPORT Radio Spectrum Matters (RSM) Identification of item tested Savant Remote B2 Trademark Savant Model and /or type reference REM-B2JB-00 Ratings Battery: DC 3V, 2 x AAA Other identification of the product FCC ID: ASU-REMB2JB IC ID: 10052A-REMB2JB Applicant ́s name / address Savant Systems, Inc. 45 Perseverance Way, Hyannis, Massachusetts, United States 02601 Test method requested, standard FCC Rules and Regulations Title 47 CFR Chapter I – Part 15 – Subpart C Section 15.247 (10-1-24 Edition) ANSI C63.10-2020 RSS-Gen Issue 5 Amendment 2: February 2021 RSS-247 Issue 4: July 2025 ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024 Verdict Summary IN COMPLIANCE Prepared by (name / position & signature) Kayuan Dai Project Manager Approved by (name / position & signature) Zuyao Fan Project Manager Date of issue 2026-07-14 Report template No TRF_FCC Part 15C & RSS-247_RF01 V1.0 DEKRA Testing and Certification (Shanghai) Ltd. No.250, Jiangchangsan Rd, Jingan District, Shanghai, 200436, People’s Republic of China TEL: +86-21-6056 7666 / FAX: +86-21-6056 7555 Report no.: 6268677.50 Page 2 / 73 INDEX page Competences and Guarantees ................................................................................................................................... 4 General conditions ...................................................................................................................................................... 4 Uncertainty .................................................................................................................................................................. 5 Environmental conditions............................................................................................................................................ 5 Possible test case verdicts ......................................................................................................................................... 6 Definition of symbols used in this test report .............................................................................................................. 6 Abbreviations .............................................................................................................................................................. 6 Document History ....................................................................................................................................................... 7 Data provided by the applicant ................................................................................................................................... 7 Conclusion, Remarks and Comments ........................................................................................................................ 7 1 General Information ........................................................................................................................................... 8 1.1 General Description of the Item(s) .......................................................................................................... 8 1.2 Test date ................................................................................................................................................. 9 1.3 Channel List ............................................................................................................................................ 9 1.4 Transmitter: RF Output Power Setting .................................................................................................. 10 2 Description of Test Setup ................................................................................................................................ 10 2.1 Operating mode(s) used for tests ......................................................................................................... 10 3 Measurement procedure ................................................................................................................................. 11 3.1 Conducted measurement ...................................................................................................................... 11 3.2 Radiated measurement ......................................................................................................................... 12 3.3 AC power line conducted emission measurement ................................................................................ 15 4 Verdict summary section ................................................................................................................................. 17 4.1 Standards .............................................................................................................................................. 17 4.2 Deviation(s) from the Standard(s) / Test Specification(s) ..................................................................... 17 4.3 Overview of results ................................................................................................................................ 18 5 Test Results ..................................................................................................................................................... 20 5.1 6dB bandwidth / DTS bandwidth ........................................................................................................... 20 5.2 99% Emission bandwidth ...................................................................................................................... 24 5.3 Maximum conducted output power ....................................................................................................... 28 5.4 Maximum power spectral density .............................................…

Text truncated - open the document above for the full version.

Savant Remote B2 | PCB Antenna Specification | Rev. 0.1 Savant Systems, Inc. | Draft | Page 1 PCB ON-BOARD ANTENNA SPECIFICATION Savant Remote B2 | Integral 2.4 GHz Bluetooth Low Energy Antenna Document number REM-B2JB-ANT-SPEC Revision / status 0.1 / Draft for certification review Product / model Savant Remote B2 / REM-B2JB-00 Applicant Savant Systems, Inc. Issue date 2026-07-27 1. Scope This specification defines the integral PCB on-board antenna used in the Savant Remote B2. It records the supplied antenna geometry, radiation patterns, gain, and efficiency data for the 2.4 GHz Bluetooth Low Energy application. 2. Antenna Summary Antenna type Integral PCB trace antenna (IFA-type) Application Bluetooth Low Energy, 2.4 GHz ISM band Intended RF band 2400-2500 MHz; product operation 2402-2480 MHz Mounting Printed directly on the product main PCB External connector None; antenna is not user replaceable Overall footprint Approximately 22.5 mm x 5.1 mm, per Figure 1 Maximum measured gain 0.99 dBi at 2490 MHz Efficiency in 2400-2500 MHz data range 37.11% to 38.82% Savant Remote B2 | PCB Antenna Specification | Rev. 0.1 Savant Systems, Inc. | Draft | Page 2 3. Mechanical Definition The antenna is formed by the PCB copper geometry shown below. The red shape represents the antenna conductor. All dimensions are in millimetres; the drawing is not to scale. Figure 1. PCB on-board antenna geometry and dimensions. Dimension Nominal value Drawing reference Overall horizontal length 22.5 mm Top dimension Overall vertical extent 5.1 mm Left-side dimension Savant Remote B2 | PCB Antenna Specification | Rev. 0.1 Savant Systems, Inc. | Draft | Page 3 4. PCB Implementation Requirements • The antenna geometry and dimensions shall be maintained without scaling. • The antenna shall remain integral to the main PCB and shall not use an end-user-accessible RF connector. • The validated PCB stack-up, ground clearance, enclosure, battery position, and nearby conductive parts shall be controlled because they can affect antenna tuning, gain, and efficiency. • Any change to antenna geometry, PCB material, matching components, or mechanical surroundings requires RF performance review and, where applicable, regulatory reassessment. 5. Antenna Location on the Main PCB The antenna is integrated into the upper-right corner of the product main PCB, as shown in Figure 1A. The antenna region and its surrounding clearance shall be maintained in the released PCB layout. Figure 1A. Overall main PCB layout; the antenna is located at the upper-right corner. Savant Remote B2 | PCB Antenna Specification | Rev. 0.1 Savant Systems, Inc. | Draft | Page 4 6. Radiation Pattern Figure 2 contains the supplied E1, E2, and H-plane two-dimensional total field patterns together with the three-dimensional total radiation pattern. Figure 2. Supplied 2D E1/E2/H-plane patterns and 3D total radiation pattern. Savant Remote B2 | PCB Antenna Specification | Rev. 0.1 Savant Systems, Inc. | Draft | Page 5 7. Gain and Efficiency The supplied swept data covers 2300-2600 MHz. Figure 3 reproduces the full dataset. Figure 3. Supplied antenna gain and efficiency data. Table 2. Measured gain and efficiency in the supplied 2400-2500 MHz highlighted range. Within this range, the maximum measured gain is 0.99 dBi at 2490 MHz. Measured efficiency ranges from 37.11% to 38.82%, with the maximum at 2430 MHz.