ASU-RFG2000WIRELESS RF GATEWAY

Wireless RF Gateway (RFG-2000) Quick Reference Guide 009- 0481-00 RFG-2000-00 6opyright © 2012 Savant Systems LLC, SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC. All brand names, product names and trademarks are the property of their respective owners. Savant Systems, LLC reserves the right to change product specifications without notice. Savant Confidential and Proprietary 021612 45 Perseverance Way, Hyannis, MA 02601 Phone 508.683.2500 Fax 508.683.2600 SavantSystems.com The Savant Wireless RF Gateway (RFG-2000) Quick Reference Guide provides the information necessary to setup and operate the Savant Select Remote. After the Savant remotes are configured in RacePoint Blueprint, the remote will automatically find and communicate (Synch) with the nearest RFG-2000. Box Contents (1) Savant Wireless RF Gateway (RFG-2000-xx) (1) Sheet metal Mounting Bracket (071-0664-xx) (1) 5V DC 2.5 AMP Universal Wall Unit with universal wall clips (025-0098-xx) (2) 2.2mm x 8mm screws (039-0205-xx) (1) Quick Reference Guide (this document) Specifications Environmental Operating Temperature 32º to 104º F (0º to 40º C) Operating Humidity 5% to 95% Non-condensing Physical Dimensions (L x. W x D) 1.75 in x 2.12 in x 0.95 in (4.44 cm x 5.38 cm x 2.41 cm) Weight 0.4 oz (0.0113 kg) Enclosure High-impact molded ABS plastic Power Power 5V DC 7.5 AMP Communication Wireless RF Transceiver, Frequency (Spectrum) - ISM Band (2.4 GHz to 2.483 GHz)* Regulatory Safety and Emissions CE/FCC Part 15/C-Tick* RoHS Compliant 1 SYNC Press to Reset RFG-2000 2 RS232 RJ-45 used to receive and transmit data transmission 3 SYNC STAT Green indicates the system has adequate power and is operating normally. Off indicates that the system is getting no power. 4 5 VDC 5V DC power connector used to supply power to the RFG-2000 Installation 1. Screw mast antenna to RFG-2000 box. 2. Screw mounting bracket at desired location. 3. Snap RFG into mounting bracket (See below). 4. Plug in 5V DC power supply. For surface mounting, the RFG-2000 can be inserted into the sheet metal mounting bracket that is shipped with the product. See below for installation instructions. Additional Documentation For more documentation, go to SavantSystems.com and navigate as follows: >Dealer Login > Knowledge Base > Products • Refer to RacePoint Blueprint™ Programming Guide Compliance Information This device is a composite device consisting of a Class B digital device and an intentional radiator that complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications of this product, not approved by manufacturer will void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (10052A-RFG2000) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Approved Antenna for the RFG-2000: Antenna 2.4GHz Rubber Antenna (Part Number: 014-0098-00) 1 3 2 4

Page Document No: 1/24/2012 1 ASU-RFG2000_DoC Confidential Savant Systems 75 Perseverance Way Hyannis, MA 02601 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: January 24, 2012 SUBJECT: FCC Application for ASU-RFG2000 To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Regards, Derek Hill Compliance Engineer 1/24/2012

Page Document No: 2/3/2012 1 ASU-RFG2000-FCC CONF. Confidential Savant Systems 75 Perseverance Way Hyannis, MA 02601 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ASU-RFG2000 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics ASU- RFG2000_Schem.pdf Parts List ASU - RFG2000_PartsLst.pdf Block diagrams ASU - RFG2000_BlockDia.Pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Derek Hill Compliance Engineer 2/3/2011

Page Document No: 1/25/2012 1 ASU- RFG2000_LABEL_PLACEMENT Confidential Savant Systems 75 Perseverance Way Hyannis, MA 02601

Page Document No: 2/3/2012 1 ASU-RFG2000-LABEL Confidential Savant Systems 75 Perseverance Way Hyannis, MA 02601

LAB REGISTRATION #6844A-2 FCC REGISTRATION #612361 Testing Laboratory Certificate #2555.01 Page 1 of 61 Report issue date: 2/17/2012 GEMC File #:GEMC-FCC-20557AR2 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. This report is based on GEMC Template “FCC 15 247 Rev2.” Global EMC Inc. Labs EMC & RF Test Report As per RSS 210 Issue 8:2010 & FCC Part 15 Subpart C:2010 Unlicensed Intentional Radiators on the Savant Bridge ( RFG-2000) Scott Drysdale, Narte Certified Technician EMC Lab Manager Global EMC Inc. 180 Brodie Dr, Unit 2 Richmond Hill, ON L4B 3K8 Canada Ph: (905) 883-3919 Testing produced for See Appendix A for full customer & EUT details . Client Savant Technologies Product Savant Bridge ( RFG-2000) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 2 of 61 Report issue date: 2/17/2012 GEMC File #: GEMC-FCC-20557AR2 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Justifications, Descriptions, or Deviations......................................................................... 6 Applicable Standards, Specifications and Methods ........................................................... 7 Sample calculation(s) ......................................................................................................... 8 Document Revision Status ................................................................................................. 8 Definitions and Acronyms ..................................................................................................... 9 Testing Facility .................................................................................................................... 10 Calibrations and Accreditations ....................................................................................... 10 Testing Environmental Conditions and Dates ................................................................. 11 Detailed Test Results Section .............................................................................................. 12 Power Line Conducted Emissions ................................................................................... 13 Radiated Emissions .......................................................................................................... 20 6dB Bandwidth of Digitally Modulated Systems ............................................................ 36 Maximum Peak Envelope Conducted Power - DM ......................................................... 39 Spurious Conducted Emissions........................................................................................ 45 Power Spectral Density - DM .......................................................................................... 51 Appendix A – EUT Summary.............................................................................................. 54 Appendix B – EUT and Test Setup Photographs................................................................. 55 Client Savant Technologies Product Savant Bridge ( RFG-2000) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 3 of 61 Report issue date: 2/17/2012 GEMC File #: GEMC-FCC-20557AR2 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Report Scope This report addresses the EMC verification testing and test results of the Savant Bridge, herein referred to as EUT (Equipment Under Test) performed at Global EMC Labs. The EUT was tested for compliance against the following standards: RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. The results contained in this report relate only to the item(s) tested. This report does not imply product endorsement by A2LA or any other accreditation agency, any government, or Global EMC Inc. Opinions/interpretations expressed in this report, if any, are outside the scope of Global EMC Inc accreditation. Any opinions expressed do not necessarily reflect the opinions of Global EMC Inc, unless otherwise stated. Client Savant Technologies Product Savant Bridge ( RFG-2000) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 4 of 61 Report issue date: 2/17/2012 GEMC File #: GEMC-FCC-20557AR2 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Summary The results contained in this report relate only to the item(s) tested. EUT FCC Certification #, FCC ID: ASU- RFG2000 EUT Industry Canada Certification #, IC: 10052A- RFG2000 EUT Passed all tests performed. Yes (see test results summary) Tests conducted by Scott Drysdale Client Savant Technologies Product Savant Bridge ( RFG-2000) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 5 of 61 Report issue date: 2/17/2012 GEMC File #: GEMC-FCC-20557AR2 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Test Results Summary Standard/Method Description Class/Limit Result FCC 15.203 Antenna Requirement Unique Pass See Justification FCC 15.205 RSS 210 (Table 1) Restricted Bands for intentional operation QuasiPeak Average Pass FCC 15.207 Power line conducted emissions QuasiPeak Average Pa…

Text truncated - open the document above for the full version.

Power Line Conducted Emissions - 1 Power Line Conducted Emissions - 2 Radiated Emissions - 9 kHz to 30 MHz Radiated Emissions – 30 MHz to 2 GHz Radiated Emissions – 2GHz to 26 GHz Antenna Conducted Measurements.