B8Q390TR2Remote Control Transmitter for Gate Opener Operation

For Technical Service, please call 1-800-275-6187 Para Servicio Técnico, por favor llame al teléfono 1-800-275-6187 PARTES Y SERVICIO Para partes y servicio, contacte al Dis- tribuidor más cercano. Cuando ordene partes, por favor especifique: NÚMERO DE MODELO NÚMERO DE PARTE DESCRIPCIÓN DE LAS PARTES Este dispositivo cumple con las reglas de la Parte 15 de la Comisión Federal de Comunicaciones (FCC – por sus siglas en inglés) con las normas de especificaciones estándar de radio (RSS – por sus siglas en inglés) de Industry Canada. La operación está sujeta a las dos siguientes condiciones: (1) Este dispositivo no podrá ocasionar interferencias, y (2) Este dispositivo tiene que aceptar cualquier interferencia, incluyendo las interferencias que podrán ser ocasionadas por la operación indeseada de este dispositivo. Numéro du service technique +1-800-275-6187 PIÈCES ET SERVICE Pour les pièces et services, contactez le distributeur de votre région. Lorsque vous commandez des pièces, veuillez indiquer: NUMÉRO DE MODÈLE NUMÉRO DE PIÈCE DESCRIPTION DES PIÈCES TRANSMISOR PROGRAMABLE OPERATOR DIVISION 1 DOOR DRIVE MT. HOPE, OHIO 44660 U.S.A. ÉMETTEUR PROGRAMMABLE OPERATOR DIVISION 1 DOOR DRIVE MT. HOPE, OHIO 44660 U.S.A. ADVERTENCIA Una puerta en movimiento puede ocasionar lesiones graves o la muerte. • No instale el control remoto hasta que el sistema de inversión de seguridad de la dirección del operador de la puerta funcione según es requerido por el manual del operador de la puerta. • El control de pared debe ser montado a la vista de la puerta por lo menos 5 pies por encima del piso y alejado de partes en movimiento. • Mantenga a las personas alejadas del vano de la puerta mientras ésta se encuentre en movimiento. • No permita que los niños jueguen con el transmisor o el operador de la puerta. • No opere una puerta que se atasque o que tenga un resorte roto. Si la inversión de seguridad de la dirección no funciona apropiadamente: • Desconecte el operador utilizando la manija de liberación manual. • No utilice el transmisor o el operador de la puerta. • Refiérase a los Manuales del Dueño de la Puerta o del Dueño del Operador de la Puerta antes de intentar cualquier reparación. Los choques eléctricos pueden ocasionar lesiones graves o la muerte. • El cable de energía debe ser desconectado antes de sujetar cualquier alambre. • Cuando se reemplace la cubierta, asegure que los alambres no estén pellizcados o cerca de partes en movimiento. • El operador debe estar conectado a tierra de manera apropiada. • Asegure que los extremos del alambre no se toquen entre sí o toquen otras terminales. Si usted tiene preguntas o si usted necesita un manual, contacte al distribuidor o al fabricante del operador. AVERTISSEMENT Toute porte en déplacement peut entraîner des blessures graves voire mortelles. • Ne pas installer la télécommande sans s’assurer que le système de l’inversion de la porte fonctionne tel que requis par le manuel d’ouvre-porte automatique. • La commande murale doit être installée en vue de la porte d’au moins 1,5 m au-dessus du sol et l’écart des pièces en mouvement. • Tenez les personnes à l’écart de l’ouverture lorsque la porte est en mouvement. • Ne pas laisser les enfants jouer avec l’émetteur ou l’ouvre-porte automatique. • Ne pas actionner une porte qui coince ni une porte dont un ressort serait cassé. Si le système de sécurité à l’inversion ne fonctionne pas correctement: • Déconnectez l’ouvre-porte automatique avec la poignée de déverrouillage manuel. • Ne pas utiliser l’émetteur ni l’ouvre-porte automatique. • Reportez-vous aux manuels de la porte ou à celui de l’ouvre-porte automatique avant de procéder à toute réparation. Une décharge électrique peut provoquer des blessures graves ou mortelles. • Le cordon d’alimentation doit être débranché avant de relier les fils. • Lors du remplacement de la couverture, vérifiez que les fils ne sont pas pincés ni près des parties mobiles. • L’ouvre-porte automatique doit être correctement mis à la terre. • Assurez-vous que les extrémités des fils ne se touchent pas les uns les autres ou d’autres terminaux. Si vous avez des questions ou si vous avez besoin d’un manuel, contactez le distributeur ou le fabricant de l’ouvre-porte automatique. WARNING Moving Door can cause serious injury or death. • Do Not install remote unless the door operator’s safety reverse works as required by the door operator’s manual. • Wall control must be mounted in sight of door at least 5 feet above floor and clear of moving parts. • Keep people clear of opening while door is moving. • Do Not allow children to play with the transmitter or door operator. • Do Not operate a door that jams or has a broken spring. If safety reverse does not work properly: • Disconnect operator using the manual release handle. • Do Not use transmitter or door operator. • Refer to Door or Door Operator Owner’s Manuals before attempting any repairs. Electrical Shock can cause serious injury or death. • Power cord must be unplugged before attaching any wires. • When replacing cover, make sure wires are not pinched or near moving parts. • Operator must be properly grounded. • Be sure wire ends do not touch each other or other terminals. If you have questions or if you need a manual, contact the distributor or manufacturer of the operator. PARTS AND SERVICE For parts and service, contact the nearest Distributor. When ordering parts, please specify: PROGRAMMABLE TRANSMITTER OPERATOR DIVISION 1 DOOR DRIVE MT. HOPE, OHIO 44660 P/N 109126.502659 9/1/14 MODEL NUMBER PART NUMBER PARTS DESCRIPTION This device complies with FCC Part 15 rules and with Industry Canada license-exempt RSS stan- dard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of this device. Le présent appareil est conforme aux CNR d’In- dustrie Canada applicables aux appareils ra…

Text truncated - open the document above for the full version.

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, Illinois 60515-1082 FCC ID: 390TR2 Product Name: Gate Opener Remote Control Transmitter Model: 111663-3902 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions’ rules, we hereby request that the following documents be held confidential:  Electrical Schematics, Layout Drawings, and Bills of Materials  Internal Photographs  Theory of Operation Documentation / Technical Description  PCB Assembly and Block Diagram These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 22nd Day of September 2014 By: James Midyette, P.E. Signature Printed Title: RF Engineer On behalf of : The Genie Company a Division of Overhead Door Corporation Telephone: 330-763-8378 Genie Company P. O. Box 67 Mt. Hope, OH 44660 Phone: 800-827-3667 (DOOR) Fax: 330-763-8042 www.geniecompany.com

Figure 1: External View / Top Figure 2: External View / Bottom

Figure 1: 390TR2 FCC / IC Label Location

Figure 1: Internal Photos / PCB Top Figure 2: Internal Photos / PCB Bottom

DIVERSIFIED T.E.S.T. TECHNOLOGIES, INC. – TEST REPORT Genie Company WAG Ring WAGWR1 Project Number: 6503-2 This report shall not be reproduced, except in full, without the written approval of DTT, Inc. 1 of 21 D D I I V V E E R R S S I I F F I I E E D D T.E.S.T. TECHNOLOGIES, INC. October 29, 2014 James Midyette Genie Company One Door Drive Mt. Hope, OH 44660 Dear Mr. Midyette: Enclosed is the test report for the Two Button Remote Control 390 MHz garage door opener transmitter model 390TR2 tested at our facility, located at 4675 Burr Drive in Liverpool, NY. This facility is on file with the Federal Communications Commission (FCC) per 47 CFR 2.948 (Site File Number 306552) and Industry Canada Site# 3034a-1. We have completed our testing of Emissions to the FCC per 47 CFR Part 15 Class B and Part 15.231 Class C for intentional radiators and IC RSS 210 for Industry Canada Radio Standards Specification. Thank you for selecting Diversified T.E.S.T. Technologies, Inc. for your testing needs. We look forward to working with you on future projects. Should you have any questions or concerns regarding this report, contact me at 315-457-0245. Please feel free to visit our website at www.dttlab.com. Sincerely, Prasanna Gautam Technical Associate 4675 Burr Drive ● Liverpool, NY 13088● 1-800-724-6452● FAX: 315-457-0428● 315-457-0245 DIVERSIFIED T.E.S.T. TECHNOLOGIES, INC. TEST REPORT Genie Company Two Button Remote Control 390TR2 Project Number: 6503-2 This report shall not be reproduced, except in full, without the written approval of DTT, Inc. 2 of 21 Test Report – Table of Contents D I V E R S I F I E D ............................................................................................................... 1 TEST INFORMATION .................................................................................................... 3 TEST REGULATIONS .................................................................................................... 4 EQUIPMENT UNDER TEST (EUT) TESTING OPERATION MODE .................... 5 TEST SETUP PHOTOGRAPHS .................................................................................... 6 1.1 RADIATED EMISSIONS / OCCUPIED BANDWIDTH ........................................................ 6 1.2. RADIATED EMISSIONS ABOVE 1 GHZ ........................................................................ 7 EMISSIONS TESTING CONDITIONS ......................................................................... 8 TRANSMISSION REQUIREMENTS ............................................................................ 9 MINIMUM STANDARD: ..................................................................................................... 9 RATIONALE FOR COMPLIANCE WITH TRANSMISSION REQUIREMENTS ........................... 10 DEACTIVATION TIME ..................................................................................................... 11 RADIATED EMISSIONS 15.231 (B) .................................................................................. 12 DUTY CYCLE CORRECTION ............................................................................................ 14 OCCUPIED BANDWIDTH ................................................................................................. 18 RESTRICTED BANDS OF OPERATION ............................................................................... 19 SPURIOUS EMISSIONS ............................................................................................... 20 RADIATED EMISSION LIMITS 15.109 ............................................................................... 20 RADIATED EMISSIONS TEST DATA 15.109 ..................................................................... 21 DIVERSIFIED T.E.S.T. TECHNOLOGIES, INC. TEST REPORT Genie Company Two Button Remote Control 390TR2 Project Number: 6503-2 This report shall not be reproduced, except in full, without the written approval of DTT, Inc. 3 of 21 T T e e s s t t I I n n f f o o r r m m a a t t i i o o n n Laboratory Manufacturer Diversified TEST Technologies, Inc. Genie Company 4675 Burr Drive One Door Drive Liverpool, NY 13088 Mt. Hope, OH 44660 Report Issue Date: October 29, 2014 Report Number: 6503-2-1029714- 15.231 (Edition 1) Project Number: 6503-2 Date Received: August 4, 2014 Date Tested: September 10, 2014 Product Two Button Remote Control 390 MHz Model: 390TR2 Traceability: Reference standards of measurement have been calibrated by a competent body using standards traceable to NIST. The testing performed by Diversified TEST Technologies, Inc. has shown that the product referenced above complies with the electromagnetic compatibility requirements according to the FCC per 47 CFR Part 15.231. The results in this test report apply only to the Two Button Remote Control 390 MHz, Model: 390TR2. It is the responsibility of the manufacturer to ensure that the product identification and labeling are in compliance with the applicable standards requirements. The manufacturer is also responsible for ensuring that additional units are manufactured with identical mechanical and electrical characteristics. The equipment listed above conforms to the specified requirements of the test standards listed in the Test Regulations section of this report. Compiled by: Signature: _____________________________ Date: October 27, 2014 Prasanna Gautam Technical Associate Reviewed by: Signature: _____________________________ Date: October 28, 2014 Steve Frierson Technical Lab Manager Authorized by: Signature: _____________________________ Date: October 28, 2014 Annelle Frierson Vice-President DIVERSIFIED T.E.S.T. TECHNOLOGIES, INC. TEST REPORT Genie Company Two Button Remote Control 390TR2 Project Number: 6503-2 This report shall not be reproduced, except in full, without the written approval of DTT, Inc. 4 of 21 T T e e s s t t R R e e g g u u l l a a t t i i o o n n s s The tests were performed according to the following standards: FCC Part 15.231 Class A Class C FCC Part 15 Clas…

Text truncated - open the document above for the full version.

DIVERSIFIED T.E.S.T. TECHNOLOGIES, INC. TEST REPORT Genie Company Two Button Remote Control 390TR2 Project Number: 6503-2 This report shall not be reproduced, except in full, without the written approval of DTT, Inc. 6 of 21 T T e e s s t t S S e e t t u u p p P P h h o o t t o o g g r r a a p p h h s s 1.1 Radiated Emissions / Occupied Bandwidth DIVERSIFIED T.E.S.T. TECHNOLOGIES, INC. TEST REPORT Genie Company Two Button Remote Control 390TR2 Project Number: 6503-2 This report shall not be reproduced, except in full, without the written approval of DTT, Inc. 7 of 21 1.2. Radiated Emissions above 1 GHz