CBF-L999Wireless Door Opening System, Hand Held Controller

Page 1 of 1 Elliott TCB 41039 Boyce Road Fremont, CA 94538 To whom it may concern: The enclosed documents constitute a formal submittal and application for Equipment Authorization for a low power 926.5 MHz transceiver pursuant to the following rules: Subpart C of Part 15.249 of FCC Rules (CFR 47) RSS-Gen Issue 3, December 2010, “General Requirements and Information for the Certification of Radiocommunication Equipment” RSS-210, Issue 8, December 2010, “Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment” Elliott Laboratories, as duly authorized agent prepared this submittal. A copy of the letter of our appointment as agent is included with the application. If there are any questions or if further information is needed, please contact Elliott Laboratories for assistance. Sincerely, David W. Bare Chief Engineer

Class EXTERNAL Product/Project SESAM 800 Subject Document Id. Revision Label for 942817-000 S800L99 FCC 945159-000 A0 Approved by Category Date Page Björn Quickers 2011-07-07 1 (2) ÅKERSTRÖMS BJÖRBO AB, SE-780 45 BJÖRBO, Sweden Phone +46 241 25 000, Fax +46 241 232 90 Vat No SE556153982501 Registrated office BJÖRBO www.akerstroms.se Specification of marking: Durability according to SS-EN 60950. If the marking consists of printed text or a label with printed text the text shall be mechanically protected by a transparent outer- layer. The total thickness of the marking shall be max. 0,15 mm. The marking shall remain clear and easy-to-read during normal operation and usage. The marking shall withstand normal cleaning with specified cleaning agent. It shall be impossible to remove the marking from the unit without permanently damaging the marking. The adhesive on the label shall not affect plastic materials in a negative way. Content: Company logotype: Black: 100% black Grey scale: 30% black Text: Fonts: Arial Narrow Textsize: 1,7- 2.00 mm Country Of Origin: Made in China Power supply: 3V Power supply External DC 6V 70mA Type: S800L99 Freq: 926,5 MHz Åkerströms art.no: Art No: 942817-000 Web address: www.akerstroms.se IP-class IP67 FCC ID FCC ID: CBF-L999 IC IC: 1339A-L999 Class EXTERNAL Product/Project SESAM 800 Subject Document Id. Revision Label for 942817-000 S800L99 FCC 945159-000 A0 Approved by Category Date Page Björn Quickers 2011-07-07 2 (2) ÅKERSTRÖMS BJÖRBO AB, SE-780 45 BJÖRBO, Sweden Phone +46 241 25 000, Fax +46 241 232 90 Vat No SE556153982501 Registrated office BJÖRBO www.akerstroms.se Example Size: Height: 7mm + 0-0,1mm Width: 25mm + 0-0,1mm Example in scale 1:1 (approx) FCC ID: CBF-L999 IC: 1339A-L999 Size: Height: 25mm + 0-0,1mm Width: 20mm + 0-0,1mm Example in scale 1:1 (approx) Art No: 942817-000 Mdl: Sesam 800 L99 Power Supply: 3V Ext.Power DC:6V 70mA Freq: 926,5 MHz www.akerstroms.se Made in China IP67

File: R85867 Page 1 EMC Test Report Application for Grant of Equipment Authorization Industry Canada RSS-Gen Issue 3 / RSS 210 Issue 8 FCC Part 15 Subpart C Model: Sesam 800 L99 IC CERTIFICATION #: 1339A-L999 FCC ID: CBF-L999 APPLICANT: Control Chief Corporation 200 Williams Street, P.O. Box 141 Bradford, PA 16701 TEST SITE(S): Elliott Laboratories 41039 Boyce Road. Fremont, CA. 94538-2435 IC SITE REGISTRATION #: 2845B-3, 2845B-5, 2845B-7 REPORT DATE: January 5, 2012 RE-ISSUED: January 31, 2012 FINAL TEST DATES: November 21 and December 7, 2011 TOTAL NUMBER OF PAGES: 32 PROGRAM MGR / QUALITY ASSURANCE DELEGATE / TECHNICAL REVIEWER: FINAL REPORT PREPARER: ______________________________ ______________________________ David W. Bare David Guidotti Chief Engineer Senior Technical Writer Elliott Laboratories is accredited by the A2LA, certificate number 0214.26, to perform the test(s) listed in this report, except where noted otherwise. This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full Elliott Laboratories -- EMC Department Test Report Report Date: January 5, 2012, Re-issued: January 31, 2012 File: R85867 Page 2 REVISION HISTORY Rev# Date Comments Modified By - 1-5-2012 First release 2 1-31-2012 Modified results summary highest field strength dwb Elliott Laboratories -- EMC Department Test Report Report Date: January 5, 2012, Re-issued: January 31, 2012 File: R85867 Page 3 TABLE OF CONTENTS REVISION HISTORY ................................................................................................................................................ 2 TABLE OF CONTENTS ............................................................................................................................................ 3 SCOPE .......................................................................................................................................................................... 4 OBJECTIVE ................................................................................................................................................................ 5 STATEMENT OF COMPLIANCE ........................................................................................................................... 5 DEVIATIONS FROM THE STANDARDS .............................................................................................................. 5 TEST RESULTS SUMMARY - SESAM 800 L99 .................................................................................................... 6 DEVICES OPERATING IN THE 902 – 928 / 2400 – 2483.5 / 5725 – 5850 MHZ BANDS ................................... 6 GENERAL REQUIREMENTS APPLICABLE TO ALL BANDS .......................................................................... 6 MEASUREMENT UNCERTAINTIES .................................................................................................................... 6 EQUIPMENT UNDER TEST (EUT) DETAILS ...................................................................................................... 7 GENERAL ................................................................................................................................................................ 7 ANTENNA SYSTEM .............................................................................................................................................. 7 ENCLOSURE ........................................................................................................................................................... 7 MODIFICATIONS ................................................................................................................................................... 7 SUPPORT EQUIPMENT ......................................................................................................................................... 7 EUT INTERFACE PORTS ...................................................................................................................................... 7 EUT OPERATION ................................................................................................................................................... 7 TEST SITE ................................................................................................................................................................... 8 GENERAL INFORMATION ................................................................................................................................... 8 CONDUCTED EMISSIONS CONSIDERATIONS ................................................................................................ 8 RADIATED EMISSIONS CONSIDERATIONS .................................................................................................... 8 MEASUREMENT INSTRUMENTATION .............................................................................................................. 9 RECEIVER SYSTEM .............................................................................................................................................. 9 INSTRUMENT CONTROL COMPUTER .............................................................................................................. 9 LINE IMPEDANCE STABILIZATION NETWORK (LISN) ...........…

Text truncated - open the document above for the full version.