DZL201640Optical Corded Mouse

Installation FCC Compliance and Advisory Statement This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. FCC Compliance and Advisory Statement Déclaration FCC © 2003 Logitech. All Rights Reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. The following "FCC Compliance and Advisory Statement" apply in general to all Logitech devices, and specifically to the devices listed there: Logitech 2.4 GHz Devices (power 3 mW max) : Model Names FCC ID Y-RM42 DZL201658 Y-RN43 DZL201678 Y-RP20 DZL201661 M-RAB81 DZL201662 C-BM16A DZL201657 C-UJ16A DZL201657 Logitech 27 MHz Devices (power 1 mW max): Model names FCC ID M-RY81 JNZ211596 M-RAA88 DZL211647 M-RAA89 DZL211646 M-RAA93 DZL201705 © 2003 Logitech. Tous droits réservés. Logitech, le logo Logitech et les autres marques Logitech sont la propriété exclusive de Logitech et sont susceptibles d’être des marques déposées. Toutes les autres marques sont la propriété exclusive de leurs détenteurs respectifs. Logitech décline toute responsabilité en cas d'erreurs dans ce manuel. Les informations énoncées dans le présent document peuvent faire l’objet de modifications sans avis préalable. La "Déclaration FCC" suivante, s'applique à tous les produits Logitech en général et spécifiquement aux produits listés ci-dessous: Produits Logitech 2.4 GHz: ( puissance émise 3 mW max) Modèle FCC ID Y-RM42 DZL201658 Y-RN43 DZL201678 Y-RP20 DZL201661 M-RAB81 DZL201662 C-BM16A DZL201657 C-UJ16A DZL201657 Produits Logitech 27 MHz: ( puissance émise 1 mW max) Modèle FCC ID M-RY81 JNZ211596 M-RAA88 DZL211647 M-RAA89 DZL211646 M-RAA93 DZL201705 Déclaration FCC Cet équipement a été testé et déclaré conforme à la section 15 du règlement de la FCC. Son fonctionnement est soumis aux conditions suivantes: 1) l'équipement concerné ne doit pas causer d'interférences dangereuses, et 2) il doit accepter toute interférence reçue, y compris les interférences risquant d'engendrer un fonctionnement indésirable. Cet équipement a été testé et déclaré conforme aux limitations prévues dans le cadre de la catégorie B des appareils numériques défini par la section 15 du règlement de la FCC. Ces limitations sont stipulées aux fins de garantir une protection raisonnable contre les interférences gênantes en installation résidentielle. Cet équipement génère, utilise et diffuse des ondes radio, et s'il n'est pas installé ni utilisé en conformité avec les instructions dont il fait l'objet, peut causer des interférences gênantes avec les communications radio. Cependant, nous ne pouvons vous garantir qu'une interférence ne se produira pas dans une installation particulière. Si cet équipement produit des interférences graves lors de réceptions radio ou télévisées qui peuvent être détectées en allumant et en éteignant l'équipement, vous êtes invités à les supprimer de plusieurs manières: 1) Réorienter ou déplacer l'antenne de réception; 2) Augmenter la distance séparant l'équipement et le récepteur; 3) Connecter l'équipement à un circuit différent de celui auquel le récepteur est connecté; 4) Contacter votre revendeur ou un technicien radio/TV qualifié. Toutes modifications ou tous changements effectués sans l'accord exprès de la partie responsable de la conformité aux normes pourraient contraindre l'utilisateur à ne plus utiliser son équipement. Afin d'assurer la conformité avec les règlements FCC, les câbles d'interface blindés fournis avec le produit doivent être utilisés, ainsi que tout autres composants ou accessoires également spécifiés, lors de l'installation du produit.

Date : October 17, 2003 ATCB C/O Tim Johnson 5825 Charleston Lane Cumming, GA 30041 Subject: Letter of confidentiality. Reference : FCC ID # DZL211646 Hello, Here by I am requesting you to keep following items Confidential while applying for FCC Grant. 1. Block diagrams 2. Circuit diagrams 3. Bill of materials Thank you for your assistance, Regards, Bharat Shah

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 October 17, 2003 RE: Logitech Inc. FCC ID: DZL201640 After a review of the submitted information, I have a few comments on the above referenced Application. 1) The labeling provided shows "FCC ID # DZL201640" which does not meet the requirements of 2.925. Please provide a modified label according to 2.925 which states "FCC ID: DZL201640". 2) The operational description used does not contain any technical information. Please adjust the confidentiality letter by removing this item. 3) Please provide a users manual for this device. Please ensure that the manual includes the proper FCC statements of 15.21 and 15.105. 4) FYI....For future reports that use the CISPR test distances and radiated limits instead of the FCC, to avoid any review problems please ask the lab to justify this in the report by citing the appropriate sections of 15.109. Timothy R. Johnson Examining Engineer mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Label Placement

Report No.: D920122H025Issued: Feb. 06, 2003 ADT No.: 920122H02 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCTMouse MODEL NO.M-SBF69 POWER SUPPLYDC 5V (From PC) DATA CABLEPS2 Cable (Unshielded, 1.8m) Note: For a more detailed features description, please refer to the manufacturer's specifications or the User's Manual. 3.2 DESCRIPTION OF TEST MODE The EUT was tested under following test modes: ! EUT with PS2 Cable (1.8m) / PS2 Interface

Report No.: D920122H021Issued: Feb. 06, 2003 ADT No.: 920122H02 FCC DoC TEST REPORT REPORT NO. :D920122H02 MODEL NO. :M-SBF69 RECEIVED :Jan. 22, 2003 TESTED :Jan. 22, 2003 APPLICANT :LOGITECH FAR EAST LTD. ADDRESS :#2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY :Advance Data Technology Corporation LAB LOCATION :No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 22 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by NVLAP or any U.S. government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. 0536 ILAC MRA Lab Code: 200376-0 Report No.: D920122H022Issued: Feb. 06, 2003 ADT No.: 920122H02 Table of Contents 1CERTIFICATION............................................................................................. 3 2SUMMARY OF TEST RESULTS..................................................................... 4 3GENERAL INFORMATION ............................................................................. 5 3.1GENERAL DESCRIPTION OF EUT ............................................................... 5 3.2DESCRIPTION OF TEST MODE.................................................................... 5 3.3DESCRIPTION OF SUPPORT UNITS............................................................ 6 4EMISSION TEST ............................................................................................ 7 4.1CONDUCTED EMISSION MEASUREMENT .................................................. 7 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT................................. 7 4.1.2 TEST INSTRUMENTS ..................................................................................... 7 4.1.3 TEST PROCEDURE ........................................................................................ 8 4.1.4 DEVIATION FROM TEST STANDARD ............................................................ 8 4.1.5 TEST SETUP ................................................................................................... 8 4.1.6 EUT OPERATING CONDITIONS ..................................................................... 9 4.1.7 TEST RESULTS ............................................................................................. 10 4.2RADIATED EMISSION MEASUREMENT ..................................................... 12 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................... 12 4.2.2 TEST INSTRUMENTS ................................................................................... 12 4.2.3 TEST PROCEDURE ...................................................................................... 13 4.2.4 DEVIATION FROM TEST STANDARD .......................................................... 13 4.2.5 TEST SETUP ................................................................................................. 14 4.2.6 EUT OPERATING CONDITIONS ................................................................... 14 4.2.7 TEST RESULTS ............................................................................................. 15 5PHOTOGRAPHS OF THE TEST CONFIGURATION ................................... 17 6APPENDIX A - INFORMATION ON THE TESTING LABORATORIES ......... 19 7APPENDIX B - CONSTRUCTION PHOTOS OF EUT .................................. 20 Report No.: D920122H023Issued: Feb. 06, 2003 ADT No.: 920122H02 1 CERTIFICATION PRODUCT :Mouse BRAND NAME :Logitech MODEL NO :M-SBF69 TEST ITEM :ENGINEERING SAMPLE APPLICANT :LOGITECH FAR EAST LTD. STANDARDS :FCC Part 15, Subpart B, Class B CISPR 22: 1997, Class B ANSI C63.4-1992 ICES-003: 1997 We, Advance Data Technology Corporation, hereby certify that one sample (Model: M-SBF69) of the designation has been tested in our facility on Jan. 22, 2003. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's EMC characteristics under the conditions herein specified. CHECKED BY: , DATE:Feb. 06, 2003 ( Midoli Peng ) APPROVED BY: , DATE: Feb. 06, 2003 ( Eric Lin, Manager ) Report No.: D920122H024Issued: Feb. 06, 2003 ADT No.: 920122H02 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: StandardTest TypeResultRemarks Conducted TestPASS Meets Class B Limit Minimum passing margin is -23.96 dB at 24.004 MHz FCC Part 15, Subpart B / CISPR 22: 1997, Class B Radiated TestPASS Meets Class B Limit Minimum passing margin is -8.7 dB at 117.52 MHz NOTE: For conducted emission test, the test limit used is according to FCC Part 15.107. In this part, conducted emission test for telecom port is not mentioned and therefore this item is not tested. Report No.: D920122H025Issued: Feb. 06, 2003 ADT No.: 920122H02 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCTMouse MODEL NO.M-SBF69 POWER SUPPLYDC 5V (From PC) DATA CABLEPS2 Cable (Unshielded, 1.8m) Note: For a more detailed features description, please refer to the manufacturer's specifications or the User's Manual. 3.2 DESCRIPTION OF TEST MODE The EUT was tested under following test modes: ! EUT with PS2 Cable (1.8m) / PS2 Interface Report No.: D920122H026Issued: Feb. 06, 2003 ADT No.: 920122H02 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. ProductBrandModel No.Serial No.FCC ID 1PERSONAL COMPUTER HEWLETT PAC HP Vectra XE310 SG14902704DoC 2MONITOR ADI937G81801CT00119727BR8937G 3PRINTER HPC2642AMY79F1C3MZB94C2642X 4MODEM ACEEX14140206026779IFAXDM1414 …

Text truncated - open the document above for the full version.

Report No.: D920122H0217Issued: Feb. 06, 2003 ADT No.: 920122H02 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: D920122H0218Issued: Feb. 06, 2003 ADT No.: 920122H02 RADIATED EMISSION TEST