DZLA00032Nano Receiver

Getting started with Logitech® Wireless Headset H600 2 Logitech® Wireless Headset H600 Getting started with Logitech® Wireless Headset H600 3 Logitech® Wireless Headset H600 English 5 Deutsch 11 Français 17 Italiano 23 Español 29 Português 35 Nederlands 41 Svenska 47 Dansk 53 Norsk 59 Suomi 65 Ελληνικά 71 По-русски 77 Magyar 83 Česká verze 89 Po polsku 95 Eesti 101 Latviski 107 Lietuvių 113 Hrvatski 119 Srpski 12 5 Slovenščina 131 Slovenčina 13 7 Română 143 Български 149 Українська 155 Türkçe 161 www.logitech.com/support 17 5 Contents 17 2 العربية English 5 Logitech® Wireless Headset H600 2 1 3 4 5 12 11 9 10 6 7 8 Headset features 1. Noise-canceling microphone 2. Flexible, rotating microphone boom 3. Adjustable headband 4. Charging port 5. Status light 6. Nano receiver storage 7. Volume up 8. Volume down 9. Power switch 10. Microphone mute 11. USB wireless Nano receiver 12. USB charging cable 6 English Getting started with 2 3 1 English 7 Logitech® Wireless Headset H600 3 8 English Getting started with 4 Try the headset Listen to music or make an Internet call to test the wireless connection between the headset and your audio source (laptop or smartphone) If the headset doesn’t work with your computer, you may need to make an adjustment in your computer’s operation system so it will recognize the headset, making the headset the default audio input/output device Also refer to Help with setup for additional troubleshooting advice Windows® XP 1. Go to Start/Control Panel/Sounds and Audio devices/Audio tab 2. In the Sound Playback/Default Device window, choose the Logitech Wireless Headset H600 3. Select the Voice tab 4. In the Voice tab, choose the Logitech Wireless Headset H600 5. Click OK 6. Restart your media application Windows® Vista and Windows® 7 1. Go to Start/Control Panel/Sounds/ Playback Devices tab 2. Choose Playback Devices 3. Choose the Logitech Wireless Headset H600 4. Click Set Default, and then click OK 5. Select the Recording Tab 6. Choose the Logitech Wireless Headset H600 7. Click Set Default, and then click OK 8. Restart your media application Mac® OS 1. Open System Preferences 2. Choose the Sound/Output tab 3. Choose the Logitech Wireless Headset H600 4. Select the Input tab 5. Choose the Logitech Wireless Headset H600 6. Close window 7. Restart your media application English 9 Logitech® Wireless Headset H600 Status light indicators Color/behaviorMeaning GreenMore than 30 minutes of battery life left Red (+ beeping)Less than 30 minutes of battery life left OrangeCharging SteadyWireless connected and ready to use BlinkingWireless not connected PulsingHeadset is off and charging OffHeadset is off Note: To charge the headset, plug the included USB charging cable into your headset and computer When the headset battery is very low, a full charge can take up to three hours But you don’t have to stop using the headset because it charges while you talk or listen to music Important: At product end of life, the battery is removable for disposal/recycling ONLY Please see www logitech com/support for more information Help with setup Something not sound right? No sound at all? Not connecting? • Try moving the headset closer to the USB wireless Nano receiver The wireless connection status light on the headset turns solid green when the headset is in range (up to 30ft/10m) with the Nano receiver See the wireless performance table below for Nano receiver placement tips • Make sure the headset is the active output audio device in both your application and operating system For more information, see Test the Headset • Adjust the volume and microphone settings to an audible level in both your application and operating system • Quit and restart your media application • If you’re using a USB hub (powered or un-powered), try plugging the Nano receiver directly into your computer • Try using the headset with another computer 10 English Getting started with Headset not charging? • Use the provided USB charging cable Connect the cable to the charging port on the headset, and connect the other end of the cable to a USB port on your computer • If you are using a USB hub, connect the charging cable directly to a USB port on your computer Controls not working? • Some functions of the headset may not be supported depending on the tablet, smartphone and/ or application Wireless performance Not recommendedRecommended Back of desktop towerFront of desktop tower Plugged into monitor or keyboard USB portDirectly plugged into the PC USB hub (powered or non-powered)Directly plugged into the PC Right next to other receivers (laptop)Away from other receivers (laptop) Within three feet of wireless routerMore than three feet away from a wireless router For additional assistance, please visit www logitech com/support Deutsch 11 Logitech® Wireless Headset H600 2 1 3 4 5 12 11 9 10 6 7 8 Headset-Funktionen 1. Mikrofon mit Rauschunterdrückung 2. Flexibler, drehbarer Mikrofonbügel 3. Verstellbarer Kopfbügel 4. Ladeanschluss 5. Statusanzeige 6. Fach für den Nano-Empfänger 7. Lauter 8. Leiser 9. Ein-/Ausschalter 10. Mikrofon-Stummschaltung 11. Kabelloser USB-Nano-Empfänger 12. USB-Ladekabel 12 Deutsch Erste Schritte 2 3 1 Deutsch 13 Logitech® Wireless Headset H600 3 14 Deutsch Erste Schritte 4 Testen Sie die kabellose Verbindung zwischen dem Headset und der Audioquelle (Notebook oder Smartphone), indem Sie Musik hören oder einen Anruf über das Internet tätigen Falls das Headset in Verbindung mit dem Computer nicht funktioniert, ist möglicherweise eine weitere Einstellung im Betriebssystem des Computers notwendig, damit das Headset standardmäßig als Audioeingangs-/-ausgangsgerät erkannt wird In der Hilfe finden Sie weitere Tipps zur Problembehandlung Windows® XP 1. Klicken Sie auf „Start > Systemsteuerung > Sounds und Audiogeräte“ und wählen Sie die Registerkarte „Audio“ 2. Wählen Sie im Abschnitt „Soundwiedergabe“ unter „Standardgerät“ die Option „Logitech Wireless Headset H600“ 3. Wählen Sie die Registerkarte „Stim…

Text truncated - open the document above for the full version.

Eesti 101 Logitech® Wireless Headset H600 2 1 3 4 5 12 11 9 10 6 7 8 Peakomplekti kirjeldus 1. Müra vaigistav mikrofon 2. Painduv ja pööratav mikrofonivars 3. Reguleeritav peavõru 4. Laadimisport 5. Olekutuli 6. Nanovastuvõtja hoidik 7. Helitugevuse suurendamine 8. Helitugevuse vähendamine 9. Toitelüliti 10. Mikrofoni vaigistus 11. Juhtmevaba USB-nanovastuvõtja 12. USB-laadimiskaabel 102 Eesti Alustamine 2 3 1 Eesti 103 Logitech® Wireless Headset H600 3 104 Eesti Alustamine 4 Peakomplekti ja heliallika (sülearvuti või nutitelefon) vahelise juhtmevaba ühenduse testimiseks kuulake muusikat või tehke internetikõne. Kui peakomplekt teie arvutiga ei tööta, võib tarvilikuks osutuda arvuti operatsioonisüsteemis peakomplekti muutmine vaikehelisisend-/vaikeheliväljundseadmeks. Lisatõrkeotsingunõuandeid leiate ka jaotisest „Abiks kasutamisel”. Windows® XP 1. Valige Start / Control Panel (Juhtpaneel) / Sounds and Audio devices (Helid ja heliseadmed) / Audio (Heli). 2. Valige aknas Sound Playback (Heli taasesitus) / Default Device (Vaikeseade) valik Logitech Wireless Headset H600. 3. Valige vahekaart Voice (Hääl). 4. Valige vahekaardil Voice (Hääl) valik Logitech Wireless Headset H600. 5. Klõpsake OK. 6. Taaskäivitage meediumirakendus. Windows® Vista ja Windows® 7 1. Valige Start / Control Panel (Juhtpaneel) / Sounds (Helid) / Playback Devices (Taasesitusseadmed). 2. Valige Playback Devices (Taasesitusseadmed). 3. Valige Logitech Wireless Headset H600. 4. Klõpsake valikut Set Default (Tee vaikesätteks) ja seejärel nuppu OK. 5. Valige vahekaart Recording (Salvestamine). 6. Valige Logitech Wireless Headset H600. 7. Klõpsake valikut Set Default (Tee vaikesätteks) ja seejärel nuppu OK. 8. Taaskäivitage meediumirakendus. Mac® OS 1. Avage System Preferences (Süsteemieelistused). 2. Valige vahekaart Sound (Heli) / Output (Väljund). 3. Valige Logitech Wireless Headset H600. 4. Valige vahekaart Input (Sisend). 5. Valige Logitech Wireless Headset H600. 6. Sulgege aken. 7. Taaskäivitage meediumirakendus. Peakomplekti testimine Eesti 105 Logitech® Wireless Headset H600 Nanoadapteri ja aku teave Olekutuleindikaatorid Värv/käitumineTähendus RohelineJäänud üle 30 minuti aku tööaega Punane (ja piiksub)Jäänud alla 30 minuti aku tööaega OranžLaadimisel PõlebJuhtmevaba ühendus olemas ja kasutuseks valmis VilgubJuhtmevaba ühendust pole PulseeribPeakomplekt on väljas ja laadimisel VäljasPeakomplekt on väljas Märkus. Peakomplekti laadimiseks ühendage kaasasolev USB-laadimiskaabel peakomplekti ja arvutiga. Kui peakomplekti aku on väga tühi, võib täiesti täis laadimine võtta kuni kolm tundi. Laadimise ajal ei pea peakomplekti kasutamist katkestama, vaid võite helistamist või muusika kuulamist jätkata. NB! Toote kasutusea lõpus PEATE selle kindlasti nõuetekohaselt kasutuselt kõrvaldama või ringlusse andma. Lisateavet leiate aadressilt www.logitech.com/support. Abiks kasutamisel Midagi ei kõla õigesti? Heli puudub täielikult? Ühendust ei looda? • Proovige peakomplekt juhtmevabale USB-nanovastuvõtjale lähemale liigutada. Kui peakomplekt on nanovastuvõtja leviulatuses (kuni 30 jalga / 10 m), muutub juhtmevaba ühenduse olekutuli peakomplektil roheliseks. Nanovastuvõtja paigutamise nõuanded leiate dokumendi lõpus asuvast juhtmevaba töökindluse tabelist. • Veenduge, et peakomplekt on nii teie rakenduse kui ka operatsioonisüsteemi aktiivne väljundheliseade. Lisateavet leiate jaotisest „Peakomplekti testimine”. • Reguleerige helitugevuse ja mikrofoni seaded nii operatsioonisüsteemis kui ka rakenduses kuuldavale tasemele. 106 Eesti Alustamine • Sulgege meediumirakendus ja seejärel taaskäivitage see. • Kui kasutate USB-jaoturit (toitega või ilma), proovige nanovastuvõtja otse arvutiga ühendada. • Proovige peakomplekti mõne teise arvutiga kasutada. Peakomplekt ei lae? • Kasutage kaasasolevat USB-laadimiskaablit. Ühendage kaabli üks ots peakomplekti laadimisporti ja teine ots arvuti USB-porti. • Kui kasutate USB-jaoturit, ühendage laadimiskaabel otse arvuti USB-porti. • Kui peakomplekti aku olekutuli pole kollane (põlev või vilkuv), ei saa peakomplekt arvuti USB-pordist toidet. Proovige mõnd muud arvuti USB-porti ja lülitage seejärel peakomplekti laadimiseks arvuti sisse või väljuge unerežiimist. Juhtnupud ei tööta? • Mõned peakomplekti funktsioonid ei pruugi tahvelarvutist, nutitelefonist ja/või rakendusest sõltuvalt toetatud olla. Juhtmevaba töökindlus EbasoovitatavSoovitatav Lauaarvuti torni tagakülgLauaarvuti torni esikülg Ühendatud kuvari või klaviatuuri USB-portiÜhendatud otse arvutiga USB-jaotur (toitega või ilma)Ühendatud otse arvutiga Otse teise vastuvõtja kõrval (sülearvuti)Teistest vastuvõtjatest eemal (sülearvuti) Wi-Fi-ruuterist kolme jala / ühe meetri ulatusesWi-Fi-ruuterist kaugemal kui kolm jalga / üks meeter Lisateavet leiate aadressilt www.logitech.com/support. Latviski 107 Logitech® Wireless Headset H600 2 1 3 4 5 12 11 9 10 6 7 8 Austiņu funkcijas 1. Trokšņus slāpējošs mikrofons 2. Lokāms, pagriežams mikrofona kāts 3. Pielāgojama austiņu stīpa 4. Uzlādes pieslēgvieta 5. Statusa indikatorlampa 6. Nanouztvērēja krātuve 7. Palielināt skaļumu 8. Samazināt skaļumu 9. Ieslēgšanas/izslēgšanas slēdzis 10. Izslēgt mikrofonu 11. USB bezvadu nanouztvērējs 12. USB uzlādes kabelis 108 Latviski Darba sākšana ar 2 3 1 Latviski 109 Logitech® Wireless Headset H600 3 110 Latviski Darba sākšana ar 4 Klausieties mūziku vai veiciet interneta zvanu, lai pārbaudītu bezvadu savienojumu starp austiņām un skaņas avotu (klēpjdatoru vai viedtālruni). Ja austiņas nedarbojas kopā ar datoru, iespējams, jums jāpielāgo datora operētājsistēma, iestatot austiņas kā noklusējuma skaņas ievades/izvades ierīci, lai sistēma austiņas atpazītu. Skatiet arī palīdzības sadaļu, lai uzzinātu papildu padomus problēmu novēršanai. Windows® XP 1. dodieties uz Start/Control Panel/Sounds and Audio devices/Audio (Sākt/Vadības panelis/ Skaņas un audio ierīces/cilni Audio). 2. Logā Sound Playback/Default Device (Skaņas atskaņošana/Noklusējuma ierīce) izvēlieties vienumu…

Text truncated - open the document above for the full version.

English Safety information WARNING! ELECTRIC SHOCK HAZARD: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO WATER. Read and follow these instructions, heed all warnings, and keep this document for future reference. • Your product is suitable for use in semi-tropical and moderate climates only. Set up your product in accordance with Logitech’s product documentation, and place your product in a stable location so it will not fall and cause product damage or bodily harm. Operate your product only from the low-level, audio line output jack of your computer or audio component. • Do not use your product near water, including dripping or splashing sources (e.g., indoor fountains), or near objects filled with liquids, such as flower vases or fish tanks. • Do not use your product near heat sources (e.g., radiators, heat registers, stoves, open flames, such as lighted candles, or other heat-producing devices, such as audio amplifiers or TVs). • Do not block ventilation openings or push objects into product vents, ports, or slots. Doing so may create an electric shock or fire hazard. Maintain a minimum distance of at least 15 cm (6 inches) around your product for sufficient ventilation. Covering ventilation openings with such items as newspapers, tablecloths, or curtains may impede ventilation and cause a fire. • Do not, under any circumstance, modify your product’s power cord and plug, including the power cord and plug to your product’s power supply, if one has been included. If the plug does not fit into your AC outlet, have a certified electrician replace your obsolete AC outlet. Protect the power cord from being stepped on or pinched, especially where the cord exits the product or plugs into an AC outlet or power strip. • Unplug your product during lightning storms or when it’s not being used for long periods of time. Disconnect your product from the AC outlet by first turning off the product or by placing it in standby mode (see product documentation for more information) before unplugging the product’s power cord from the AC outlet. Your product’s power cord and plug must remain operational at all times, and the AC outlet (receptacle) should be near the product and easily accessible. • Only use approved attachments and accessories specified by Logitech. • Refer all servicing and repair to qualified service personnel. Servicing is required when your product does not operate normally, the power cord/plug has been damaged, the product has been exposed to water, rain, liquid, or moisture, the product has been dropped, or an object has been inserted into a product port or vent. • For portable products or products weighing less than 7 kg (15 lbs), the product label may be found on the product stand, under a lid, or on the bottom of the product itself. • Clean your product using only a dry cloth and no water or liquid. Warning Symbols Explained This symbol is placed on the product to tell you to proceed with CAUTION. Refer to your product documentation before continuing. Find the section in the manual that pertains to the product feature or function referenced by this symbol. This symbol is placed on the product as a WARNING. Access to this area of the product is restricted. Failure to comply could result in an electrical shock hazard. Protect your hearing Listening advice to avoid hearing damage Listening via headphones, earbuds, or headsets at a high volume may cause permanent hearing loss to occur. The louder the volume, the less time is required before your hearing could be affected. To establish a safe volume level: • Start your equipment with the volume control at its lowest setting. • Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. • Avoid setting the volume at a level that prevents you from hearing conversations and other similar noises around you. Once you have established a comfortable sound level, leave it there. If you experience a ringing in your ears, discomfort or muffled speech, reduce the volume or stop listening and have your hearing checked. See the product support page on the Logitech website www.logitech.com for additional information. Disposal guidelines at product end of life Some Logitech products use non-serviceable, nickel-metal hydride (NiMH) batteries, which should last the duration of a product’s warranty period under normal use. Please do NOT attempt to change the battery yourself. If the battery has died and you do not want Logitech to replace the battery, you should follow the disposal instructions in the documentation that accompanies your product. Also consult local laws and regulations for the proper disposal of batteries and electronic devices in your region. If there are no local regulations concerning electronic waste disposal, place your product (and its battery) in a waste bin for electronic devices. Caution: Battery Warning! There is a risk of explosion, fire, or chemical burns if a battery is replaced by incorrect type, mutilated, or exposed to conducting materials, liquid, fire, or heat (above 54° C or 130° F). Do not use or recharge a damaged rechargeable battery. Do not use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave a battery discharged or unused for extended periods of time. Do not mix battery types. When a battery is misused, it may explode or leak, causing burns and personal injury. If a battery leaks, use normal precaution and discard it immediately following the local laws and regulations in your area. Power supply warning: Caution electric shock/fire hazard! For indoor use only. Do not expose to moisture, liquid, or heat. Do not use any other power supply with your Logitech product. FCC and IC Statements This Class B digital apparatus complies with Canadian ICES-003. (Cet appareil numérique de catégorie B est conforme à la norme canadienne ICES-003.) This device complies with Industry Canada licence-exempt RSS …

Text truncated - open the document above for the full version.

Logitech Inc. 6505 Kaiser Drive, Fremont, CA 94555 USA Tel: (360) 817-1200, Fax: (360) 817-1331 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Request for Confidentiality FCC ID:DZLA00032 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment.The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to DA 04-1705 of the Commission’s Rules, we requestshort-term confidential treatmentfor the following information untilOctober.7.2011of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Mark Ohnstad / Sr. Manager, Product Regulatory Compliance Logitech Inc. E-mail: [email protected] Date: 2011/7/8

P O W E R O F A T T O R N E Y We, the undersigned LOGITECH INC.hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority.Any and all acts carried out by Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch on our behalf shall have the same effects as acts of our own. This authorization is limited to the following product(s): Model / Type: A-00031 Name of Equipment: Wireless Headset H600 Brand of Product: Logitech FCC ID: DZL A00031 Model / Type: A-00032 Name of Equipment: Nano receiver Brand of Product: Logitech FCC ID: DZL A00032 Model / Type: A-00033 Name of Equipment: Wireless Headset H800 Brand of Product: Logitech FCC ID: DZL A00033 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Mark Ohnstad / Sr. Manager, Product Regulatory Compliance Logitech Inc. Tel: +1-360-817-1200 Fax: +1-360-817-1331 E-mail: [email protected] Date: 2011/7/8

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

(Fig.1) FCC ID: DZLA00032 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. FCC ID

CMIIT ID2011YYXXXX Model#:A-00032 P/N:881-000108 FCC ID:DZLA00032 IC:1807D-A00032 Approval No.:ETA-xx/yyyy KCC-CRM-DZL-A-00032

Page 3 Page 4

Report No.: SA110708E01 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110708E01 MODEL NO.: A-00032 FCC ID: DZLA00032 APPLICANT: Logitech Inc. ADDRESS: 6505 Kaiser Drive, Fremont, CA 94555 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110708E01 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION..............................................................................................4 2. EVALUATION RESULT...................................................................................5 Report No.: SA110708E01 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110708E01 Original release Aug. 01, 2011 Report No.: SA110708E01 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT : Nano Receiver BRAND NAME : Logitech MODEL NO. : A-00032 TEST SAMPLE : ENGINEERING SAMPLE APPLICANT : Logitech Inc. STANDARDS : FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: A-00032) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and was in compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Aug. 01, 2011 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Aug. 01, 2011 ( May Chen, Deputy Manager ) Report No.: SA110708E01 Report Format Version 4.0.0 5 2. EVALUATION RESULT No SAR Evaluation Required if power is below the following threshold: Tunable Range F(GHz) Low F(GHz) High 60/f SAR Limitation (mW) 2.402 2.480 24.19 Maximum measured transmitter power: Pout Conducted (dBm) Pout Conducted (mW) Maximum Antenna Gain (dBi) Pout EIRP (mW) 6.3 4.3 -4.83 1.403 Threshold for no SAR evaluation is 24.19 mW Maximum TX Power is 4.3mW Conducted and 1.403 mW EIRP Conclusion: No SAR evaluation required since maximum Transmitter Pout (both conducted and EIRP) is below FCC threshold --- END ---

Report No.: RF110708E01 1 Report Format Version 4.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF110708E01 MODEL NO.: A-00032 FCC ID: DZLA00032 RECEIVED: July 08, 2011 TESTED: July 13 to 19, 2011 ISSUED: Aug. 01, 2011 APPLICANT: Logitech Inc. ADDRESS: 6505 Kaiser Drive, Fremont, CA 94555 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 76 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110708E01 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD........................................................................................................4 1 CERTIFICATION................................................................................................................5 2 SUMMARY OF TEST RESULTS.........................................................................................6 2.1 ME ASUREMENT UNCERTAINTY.....................................................................................7 3 GENERAL INFORMATION.................................................................................................8 3.1 GENERAL DESCRIPTION OF EUT....................................................................................8 3.2 DESCRIPTION OF TEST MODES......................................................................................9 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:......................................10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS.....................................................12 3.5 DESCRIPTION OF SUPPORT UNITS...............................................................................13 3.6 CONFIGURATION OF SYSTEM UNDER TEST.................................................................14 4 TEST PROCEDURES AND RESULTS..............................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT.....................................................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................................15 4.1.2 TEST INSTRUMENTS.......................................................................................................15 4.1.3 TEST PROCEDURES.......................................................................................................16 4.1.4 TEST SETUP....................................................................................................................16 4.1.5 EUT OPERATING CONDITIONS.......................................................................................17 4.1.6 TEST RESULTS................................................................................................................18 4.2 RADIATED EMISSION MEASUREMENT..........................................................................20 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT........................................................20 4.2.2 TEST INSTRUMENTS.......................................................................................................21 4.2.3 TEST PROCEDURES.......................................................................................................23 4.2.4 DEVIATION FROM TEST STANDARD..............................................................................23 4.2.5 TEST SETUP....................................................................................................................24 4.2.6 EUT OPERATING CONDITIONS.......................................................................................24 4.2.7 TEST RESULTS................................................................................................................25 4.3 NUMBER OF HOPPING FREQUENCY USED..................................................................36 4.3.1 LIMIT OF HOPPING FREQUENCY USED.........................................................................36 4.3.2 TEST INSTRUMENTS.......................................................................................................36 4.3.3 TEST PROCEDURES.......................................................................................................36 4.3.4 DEVIATION FROM TEST STANDARD..............................................................................36 4.3.5 TEST SETUP....................................................................................................................37 4.3.6 TEST RESULTS................................................................................................................37 4.4 DWELL TIME ON EACH CHANNEL..................................................................................41 4.4.1 LIMIT OF DWELL TIME USED..........................................................................................41 4.4.2 TEST INSTRUMENTS.......................................................................................................41 4.4.3 TEST PROCEDURES.......................................................................................................41 4.4.4 DEVIATION FROM TEST STANDARD..............................................................................42 4.4.5 TEST SETUP....................................................................................................................42 4.4.6 TEST RE…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST