DZLF0415AF-0415A

A. Logitech ® Wireless Headphone for MP3 B. Wireless adapter for MP3 C. Power adapter/charger D. Connect button E. Indicator LEDs F. Volume controls G. Reset button A. Casque sans fil Logitech ® pour MP3 B. Adaptateur sans fil pour MP3 C. Adaptateur/chargeur D. Bouton de connexion E. Témoins LED F. Contrôles de volume G. Bouton de réinitialisation A. Logitech ® Wireless Headphone for MP3 B. Adaptador inalámbrico para MP3 C. Adaptador de alimentación/cargador D. Botón Connect E. Diodos indicadores F. Controles de volumen G. Botón Reset Connecting your wireless adapter to your MP3 or digital audio player Connexion de l’adaptateur sans fil au lecteur audionumérique ou MP3 Conexión del adaptador inalámbrico al reproductor de audio digital o MP3 Headphone overview Présentation du casque Introducción a los auriculares Logitech ® Wireless Headphone for MP3 Casque sans fil pour MP3 www.logitech.com 4 6 1 While playing music on your portable audio device: 1. Press the “+” key to increase the volume. 2. Press the “-” key to decrease the volume. Durant l’écoute musicale: 1. Appuyez sur la touche + pour augmenter le volume. 2. Appuyez sur la touche - pour baisser le volume. Mientras reproduce música en el dispositivo de audio portátil: 1. Pulse el botón “+” para aumentar el volumen. 2. Pulse el botón “-” para reducir el volumen. Controlling your music Commandes pour la musique Control de música 5 Product operation Fonctionnement Funcionamiento del producto 3 Logitech wireless headphone indicators: Headphone Blinks Blue Fast Blinking Blue Fast Blinking Red Solid Orange Wireless Adapter Solid Blue Solid Red Fast Blinking Red Solid Orange Powered On & Connected Charging Powered On, Not Connected Low Battery LED STATES: Témoins du casque sans fil Logitech: Casque Clignotement Clignotement Clignotement Illumination bleu rapide bleu rapide rouge constante orange Adaptateur sans fil Illumination Illumination Clignotement Illumination constante bleue constante rouge rapide rouge constante orange Allumé et connecté Chargement Allumé et déconnecté Batterie faible Etats du témoin LED: Indicadores de los auriculares inalámbricos Logitech: Auriculares Destellos azules Destellos azules Destellos rojos Naranja rápidos rápidos permanente Adaptador Azul permanente Rojo Destellos rojos Naranja inalámbrico permanente rápidos permanente Encendido y conectado Carga en curso Encendido pero no conectado Carga de pilas baja DIODOS: 2 Charging your wireless headphones and adapter Chargement du casque sans fil et adaptateur Carga del adaptador y los auriculares inalámbricos 1. Plug the A/C adapter into your wireless headphones and your wireless adapter. 2. The LEDs should glow orange while the headphones and wireless adapter are charging. 3. When the light turns off, your headphones are ready for use. 1. Branchez l’adaptateur secteur dans le casque sans fil et dans l’adaptateur sans fil. 2. Le témoin LED orange brille durant le chargement du casque et de l’adaptateur sans fil. 3. Quand le témoin s’éteint, le casque est prêt à l’emploi. 1. Conecte el adaptador CA a los auriculares inalámbricos y al adaptador inalámbrico. 2. Los diodos deberían iluminarse de color naranja mientras se cargan los auriculares y el adaptador inalámbricos. 3. Cuando se apague la luz, los auriculares estarán listos para usarlos. Powering your headphone and adapter Alimentation du casque et de l’adaptateur Encendido de los auriculares y del adaptador 1. Press and hold the Connect button on the headphone until the LED turns on. 2. Press and hold the Connect button on the adapter until the LED turns on. 3. Both LEDs will turn blue once the headphone and adapter connect with each other. 4. Press Play on your iPod / audio device. 1. Appuyez et maintenez enfoncé le bouton Connect du casque jusqu’à ce que le témoin LED s’allume. 2. Appuyez et maintenez enfoncé le bouton Connect de l’adaptateur jusqu’à ce que le témoin LED s’allume. 3. Les deux témoins sont bleus quand le casque et l’adaptateur sont connectés entre eux. 4. Appuyez sur le bouton Lecture de votre iPod/dispositif audio. 1. Mantenga pulsado el botón Connect de los auriculares hasta que se ilumine el diodo. 2. Mantenga pulsado el botón Connect del adaptador hasta que se ilumine el diodo. 3. La luz de ambos diodos será azul en cuanto se establezca la conexión entre los auriculares y el adaptador. 4. Pulse el botón de reproducción en el dispositivo de audio/iPod. 1 2 7 Troubleshooting Dépannage Resolución de problemas F Quick-Start Guide Guide de démarrage rapide C 3 3 1 2 4 D D G E E B A The adapter or headphone will not turn on. 1. Make sure the adapter and headphone are fully charged. 2. Press and hold the Connect button until the LED begins to flash (should take 3 seconds). 3. If the adapter or headphone still will not turn on, press the Reset button (requires a paper clip). The adapter and headphone turn on, but will not connect to each other. 1. Make sure both devices are off. 2. Turn on the headphone first, then the adapter. The devices should automatically connect to each other. 3. If the devices still do not connect, wait until the adapter LED is solid red and the headphone LED is in a 3 blue blink pattern, then press the Connect button on the headphone. 4. If they still do not connect, try re-pairing the devices. How do I re-pair the adapter and headphone? 1. Turn both devices off. 2. Press and hold the Connect button on each device until the LED flashes red and blue (should take 10 seconds). 3. When the LEDs blink only blue (after 15-30 seconds), re-pairing is complete. The adapter and headphone are connected, but no music is coming through the headphones. 1. Make sure your iPod / audio device is powered on and playing. 2. Make sure the volume level on your iPod / audio device is at least halfway up. 3. Make sure the volume level on your headphones is at least halfway up (press the volume up button on the headphones several times). The music signal breaks up. 1. When indoors, you will t…

Text truncated - open the document above for the full version.

October 19, 2004 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern, We, the undersigned, hereby authorize Northwest EMC, Inc., to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Northwest EMC, Inc. within the scope of this authorization shall have the same affect as our own. This authorization shall expire 12 months from original date. Sincerely, Mitchell Phillipi Sr. Compliance Engineer

Northwest EMC TCB Approval Opinion Revision 05//02 LABT0125 Information about the Applicant Applicant: Logitech, Inc. Address: 1499 SE Tech Center Place Suite 350 City, State, Zip Vancouver, WA 98683 Test Requested By: Mitchell Phillipi Model: Bluetooth Dongle for Generic MP3 Players MN: F-0415A Bluetooth Dongle for iPod MN: F-0397A FCC ID: DZLF0415A DZLF0397A. Agent Northwest EMC, Inc. Approval Type Certification Equipment Type Low power intentional radiator Rule Part 15.247 Overview This application for the certification of Logitech’s F-0397A transmitter, FCC ID: DZLF0397A. It is a Bluetooth dongle for the iPOD. The radio utilizes an integral antenna. This configuration satisfies the requirements of 47 CFR 15.203. The technical reports and exhibits demonstrate compliance with FCC rules 47 CFR 15.247 as a DTS transmitter. It is also an application for the certification of Logitech’s F-0415A transmitter, FCC ID: DZLF0415A. It is a Bluetooth dongle for generic MP3 players. The radio utilizes an integral antenna. This configuration satisfies the requirements of 47 CFR 15.203. The technical reports and exhibits demonstrate compliance with FCC rules 47 CFR 15.247 as a DTS transmitter. The F-0415A is a Bluetooth dongle that connects to any MP3 player. The F-0397A is a Bluetooth dongle that only connects to Apple Computer’s iPod MP3 player. Both dongles provide wireless connectivity to Bluetooth headphones. Both models are identical except for the geometry of the audio connector that interfaces to the host device. Northwest EMC TCB Approval Opinion Revision 05//02 LABT0125 Findings Item The conducted emissions in the report should be organized the same as the radiated spurious emissions. Resolution Report has been corrected. Item The technical report states the direct connect tests were performed on the F-0415A, the data in the report states the F-0397A was used for direct connect tests. Resolution Report has been corrected. Item The technical report states battery power was used in many of the test descriptions and data sheets, yet there is an AC adapter listed in the description and appears in the photos Resolution Report is correct, additional information has been provided. Item The user manual is missing the statements required for Part 15 devices: Sec. 15.21 Information to user. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Sec. 15.19 Labelling requirements. (a) In addition to the requirements in part 2 of this chapter, a device subject to certification, or verification shall be labelled Resolution Information is actually there on page 2. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Northwest EMC TCB Approval Opinion Revision 05//02 LABT0125 Opinion Specification Requirements Description 15.207 Conducted Power Line Emissions Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Technical Report Specification Requirements Description 15.247(a) Bandwidth Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Technical Report Specification Requirements Description 15.247(b) Power Output Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Technical Report Specification Requirements Description 15.247(d) Spurious Emissions, Antenna Conducted Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Technical Report Specification Requirements Description 15.247(d) Spurious Emissions, Radiated Emissions Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report. Reference: Technical Report Northwest EMC TCB Approval Opinion Revision 05//02 LABT0125 Specification Requirements Description 15.247(e) Power Spectral Density Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report Reference: Technical Report Specification Requirements Description 15.247(d) Band Edge Compliance Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted test results in the form of a test report. Reference: Technical Report Specification Requirements Description 2.1091/15.247 RF Exposure Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted MPE estimates demonstrating compliance. Reference: RF Exposure Exhibit Specification Requirements Description Additional Requirements FCC Compliance common to all Bluetooth Devices Opinion: The Equipment meets the intent specified by the requirements listed above. Discussion: The Applicant has submitted the required information in the test report. Reference: Technical Report

NORTHWEST EMC, INC. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 June 15, 2005 Dear Application Examiner: On behalf of Logitech Inc., Northwest EMC, Inc. is submitting this application for the certification of Logitech’s F-0415A transmitter, FCC ID: DZLF0415A. It is a Bluetooth dongle for generic MP3 players. The radio utilizes an integral antenna. This configuration satisfies the requirements of 47 CFR 15.203. The technical reports and exhibits demonstrate compliance with FCC rules 47 CFR 15.247 as a DTS transmitter. Your efforts in reviewing this application are greatly appreciated. Best regards, Northwest EMC, Inc.

May 19, 2005 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459, the documents listed below and attached with this application for certification be provided with confidential status. • Schematics • Theory of Operation • Frequency Block Diagrams Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Mitchell Phillipi Sr. Compliance Engineer

FCC ID: DZLF0415A IC: 1807D - F0415A Model #: F-0415A ������ ���������������������� � � ��

Per 15.203, the antenna is internal and permanently attached. It is not intended to be serviced by the customer and is, therefore only serviceable by Logitech, Inc. authorized personnel. The antenna is a monopole whip-antenna, L shaped, with 3.03dBi maximum gain.

Compliance with 47 CFR 15.247(i) “Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.” The EUT is a Bluetooth dongle for generic MP3 players, some of which can be body-worn. It can be considered a portable transmitter per 47 CFR 2.1093(b). The antenna is internal to the unit and has 3.03 dBi gain. The maximum peak conducted output power is 2.87 mW. The maximum peak power is 5.77 mW (EIRP) for FCC ID: DZLF0415A. The transmit frequency is 2402 to 2480 MHz, therefore the EUT does not require routine SAR evaluation per “TCB Exclusions List”, footnote 3 (dated July 17, 2002). See below: The exposure category is “General Population”. The distance is < 2.5 cm. Therefore the “Low Threshold” is 24.5 mW (EIRP) – above which routine SAR evaluation would be required. Since the maximum peak power of the EUT is 5.77 mW (peak EIRP), routine SAR evaluation is not required. The applicant’s Bluetooth radio, FCC ID: DZLF0415A, is compliant with the requirements of 15.247(i).

Logitech, Inc. Bluetooth Dongle for Generic MP3 Players MN: F-0415A Bluetooth Dongle for iPod MN: F-0397A June 14, 2005 Report No. LABT0125 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2005 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: June 14, 2005 Logitech, Inc. Bluetooth Dongle for Generic MP3 Players MN: F-0415A Bluetooth Dongle for iPod MN: F-0397A Emissions Specification Test Method Pass Fail FCC 15.207 AC Powerline Conducted Emissions:2005-04 ANSI C63.4:2003 FCC 15.247(a) Occupied Bandwidth:2005-04 ANSI C63.4:2003 FCC 15.247(b) Output Power:2005-04 ANSI C63.4:2003 FCC 15.247(d) Band Edge Compliance:2005-04 ANSI C63.4:2003 FCC 15.247(d) Spurious Conducted Emissions:2005-04 ANSI C63.4:2003 FCC 15.247(d) Spurious Radiated Emissions:2005-04 ANSI C63.4:2003 FCC 15.247(e) Power Spectral Density:2005-04 ANSI C63.4:2003 Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400; Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada. Approved By: Greg Kiemel, Director of Engineering This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested, the specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 05/05/03 Revision Number Description Date Page Number 00 None Northwest EMC Accreditations and Authorizations Revision 03/18/05 FCC: Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP: Northwest EMC, Inc. is recognized under the United States Department of Commerce, National Institute of Standards and Technology, and National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 89/336/EEC, ANSI C63.4, MIL- STD 461E, DO-160D and SAE J1113. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. 200629-0 200630-0 200676-0 Industry Canada: Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS 212, Issue 1 (Provisional) and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. CAB: Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. TÜV Product Service: Included in TUV Product Service Group's Listing of Recognized Laboratories. It qualifies in connection with the TUV Certification after Recognition of Agent's Testing Program for the product categories and/or standards shown in TUV's current Listing of CARAT Laboratories, available from TUV. A certificate was issued to represent that this laboratory continues to meet TUV's CARAT Program requirements. Certificate No. USA0401C. TÜV Rheinland: Authorized to carryout EMC tests by order and under supervision of TÜV Rheinland. This authorization is based on "Conditions for EMC-Subcontractors" of November 1992. Northwest EMC Accreditations and Authorizations Revision 03/18/05 NEMKO: Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Technology International: Assessed in accordance with ISO Guide 25 defining the general international requirements for the competence of calibration and testing laboratories and with ITI assessment criteria LACO196. Based upon that assessment, Interference Technology International, Ltd., has granted approval for specifications implementing the EU Directive on EMC (89/336/EEC and amendments). The scope of the approval was provided on a Schedule of Assessment supplied with the certificate and is available upon request. Australia/New Zealand: The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test r…

Text truncated - open the document above for the full version.