ENPESTEEM195H217-220MHz VHF Telemetry Modem

ESTeem USER’S MANUAL Models 195C – 195M Manual Revision 1.0 February 2014 Electronic Systems Technology, Inc. Author: Date: Name: Eric P. Marske Title: Product Support Manager Approved by: Date: Name: Tom L. Kirchner Title: President Electronic Systems Technology, Inc. Building B1 415 N. Quay Street Kennewick, WA 99336 Phone: 509-783-9092 Fax: 509-783-5472 E-mail: [email protected] Web Site: www.esteem.com Copyright© 2014 by Electronic Systems Technology, Inc. All rights reserved. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Electronic Systems Technology. PRODUCT WARRANTY ELECTRONIC SYSTEMS TECHNOLOGY, INC. Specifications subject to change without notice 415 North Quay Street  Kennewick, WA 99336 www.esteem.com Phone (509) 735-9092  Fax (509) 783-5475 Revised: 4 Feb 14 Electronic Systems Technology, Inc., (hereinafter EST) expressly warrants its products as free of manufacturing defects for a period of one year from the date of sale to first user/customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED AND THERE IS EXPRESSLY EXCLUDED ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO OTHER WARRANTY GIVEN BY ANY EMPLOYEE, AGENT, DISTRIBUTOR OR OTHER PERSON WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON EST. LIMITATION OF LIABILITY: EST's liability shall be limited to refunding of purchase price, repair or replacement of product. IN NO EVENT SHALL EST HAVE LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES CAUSED DIRECTLY OR INDIRECTLY BY THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY INTERRUPTION OF SERVICES, LOSS OF BUSINESS OR ANTICIPATORY PROFITS. IN NO EVENT SHALL EST BE LIABLE FOR ANY DAMAGES WHATSOEVER IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT. In the event that a unit or part requires replacement or factory servicing, the following conditions apply: a) Customer must obtain from EST an authorized RMA (Return Materials Authorization) Number before shipment of product or parts to EST for any reason; b) If the whole unit is shipped, it must be in its original carton and shipping components, or a carton and shipping components supplied by EST, or it parts only are shipped, they must be packaged and cushioned so as to prevent damage in transit and shipped freight prepaid; PRODUCT WILL BE CONSIDERED OUT OF WARRANTY IF: a) If the product is damaged due to improper or abnormal use, abuse, mishandling, accident or improper maintenance or failure to follow operating instruction; b) If the product is defective as a result of sand, dirt, or water damage; c) If any factory-sealed enclosure has been opened or shows evidence of an attempt to be opened; d) If defects or damage are caused by the use of unauthorized parts or unauthorized service; e) If the product has had its serial numbers altered or removed. Warranty repair form must be accompanied by proof of user's purchase of unit. Product must be shipped to the manufacturer at the following address: Electronic Systems Technology 415 North Quay Street Kennewick, Washington USA 99336 ADDITIONAL SERVICE: If EST releases an improvement update to firmware internal to the ESTeem unit during the 90 day period after the unit was purchased by the first user/customer, EST will update the applicable unit with the revised version at no charge other than for UPS handling and shipping to and from your location to the EST factory. Return of any such item must be accompanied with proof of purchase. TABLE OF CONTENTS Revised: 4 Feb 14 Page 1 EST P/N AA107-195CM CHAPTER 1 – Introduction Before You Begin 1-1 Model 195C/M Overview 1-1 Serial Applications ---------------------------------------------1-1 Ethernet Applications ---------------------------------------------1-2 Sensor Applications ---------------------------------------------1-2 Legacy Model 192 Applications ---------------------------------------------1-2 CHAPTER 2 – Starting Out Three Configuration Phases 2-1 Model 195Eg Hardware Configuration 2-2 CHAPTER 3 – Example Applications Modes of Operation Description and Examples 3-1 Transparent Point to Point ---------------------------------------------3-1 Transparent Multipoint ---------------------------------------------3-3 PLC Emulations ---------------------------------------------3-4 Programming Examples 3-5 Using Model 195C/M Configuration Utility ---------------------------------------------3-5 Example 1 – Transparent Point to Point ---------------------------------------------3-6 Example 2 – Transparent Point to Point with Repeater ---------------------------------------------3-8 Example 3 – Transparent Multipoint ---------------------------------------------3-9 Example 4 – PLC Emulation Mode --------------------------------------------- 3-10 Example 5 – Mobile Client Mode ---------------------------------------------3-15 PLC Emulation Command Lists 3-11 CHAPTER 4 – Repeating Features Configuring Route and Append Tables --------------------------------------------- 4-1 Reading Route and Append Tables --------------------------------------------- 4-3 Clearing Route and Append Tables --------------------------------------------- 4-3 CHAPTER 5 – Ethernet Applications Programming Through Ethernet Port --------------------------------------------- 5-1 Ethernet Bridge Mode --------------------------------------------- 5-2 Using Ethernet as Serial Device Interface (SDI) --------------------------------------------- 5-3 TABLE OF CONTENTS Revised: 4 Feb 14 Page 2 EST P/N AA107-195CM CHAPTER 6 – Utilities and Features Model 195C/M Configuration Utility 6-1 Installation --------------------------------------------- 6-1 Read Modem Configuration --------------------------------------------- 6-3 Write Modem Configuration --------------------------------------------- 6-3 Reset Modem -----------…

Text truncated - open the document above for the full version.

2014-07-29 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR 195H, FCC ID: ENPESTEEM195H To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the schematics, block diagram, bill-of-materials, and operational description documents required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Sincerely, Todd Elliott ELECTRONIC SYSTEMS TECHNOLOGY, INC. 415 North Quay St. • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475 1 of 1

Photograph 1. Back Photograph 2. Bottom Photograph 3. Front Photograph 4. Left Side Photograph 5. Right Side Photograph 6. Top

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ● BALTIMORE, MARYLAND 21230-3432 ● PHONE (410) 354-3300 ● FAX (410) 354-3313 33439 WESTERN AVENUE ● UNION CITY, CALIFORNIA 94587 ● PHONE (510) 489-6300 ● FAX (510) 489-6372 3162 BELICK STREET ● SANTA CLARA, CALIFORNIA 95054 ● PHONE (408) 748-3585 ● FAX (510) 489-6372 13301 MCCALLEN PASS ● AUSTIN, TEXAS 78753 ● PHONE (512) 287-2500 ● FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory August 12, 2014 Electronic Systems Technology 415 N. Quay Street Kennewick, WA 99336 Dear Todd Elliot, Enclosed is the EMC Wireless test report for compliance testing of the Electronic Systems Technology, 195H, tested to the requirements of Title 47 of the Code of Federal Regulations (CFR), Part 15 Subpart B for a Class A Digital Device, Part 90 for Land Mobile Radio Services. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Electronic Systems Technology\EMC42069-FCC90 Rev. 1) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ● BALTIMORE, MARYLAND 21230-3432 ● PHONE (410) 354-3300 ● FAX (410) 354-3313 33439 WESTERN AVENUE ● UNION CITY, CALIFORNIA 94587 ● PHONE (510) 489-6300 ● FAX (510) 489-6372 3162 BELICK STREET ● SANTA CLARA, CALIFORNIA 95054 ● PHONE (408 748-3585 ● FAX (510) 489-6372 13301 MCCALLEN PASS ● AUSTIN, TEXAS 78753 ● PHONE (512) 287-2500 ● FAX (512) 287-2513 DOC-EMC700 7/9/04 Electromagnetic Compatibility Criteria Test Report For the Electronic Systems Technology 195H Tested under The FCC and IC Verification Rules Contained in Title 47 of the CFR, Part 15 B for a Class A Digital Device & Part 90 for Private Land Mobile Radio Services MET Report: EMC42069-FCC90 Rev. 1 August 12, 2014 Prepared For: Electronic Systems Technology 415 N. Quay Street Kennewick, WA 99336 Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Electromagnetic Compatibility Electronic Systems Technology Cover Page 195H CFR Title 47 Part 15B & Part 90 MET Report: EMC42069-FCC90 Rev. 1 © 2014, MET Laboratories, Inc. Page ii of ix DOC-EMC700 7/9/04 Electromagnetic Compatibility Criteria Test Report For the Electronic Systems Technology 195H Tested under The FCC and IC Verification Rules Contained in Title 47 of the CFR, Part 15 B for a Class A Digital Device & Part 90 for Private Land Mobile Radio Services MET Report: EMC42069-FCC90 Rev. 1 Jason Allnutt, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of Part 15 B and Part 90 of the FCC Rules under normal use and maintenance. Asad Bajwa, Director, Electromagnetic Compatibility Lab Electromagnetic Compatibility Electronic Systems Technology Report Status 195H CFR Title 47 Part 15B & Part 90 MET Report: EMC42069-FCC90 Rev. 1 © 2014, MET Laboratories, Inc. Page iii of ix DOC-EMC700 7/9/04 Report Status Sheet Revision Report Date Reason for Revision  July 31, 2014 Initial Issue. 1 August 12, 2014 Editorial corrections. Electromagnetic Compatibility Electronic Systems Technology Table of Contents 195H CFR Title 47 Part 15B & Part 90 MET Report: EMC42069-FCC90 Rev. 1 © 2014, MET Laboratories, Inc. Page iv of ix DOC-EMC700 7/9/04 Table of Contents 1. Executive Summary .................................................................................................................................................... 1 1.1. Testing Summary ................................................................................................................................................... 2 2. Equipment Configuration........................................................................................................................................... 3 2.1. Overview ................................................................................................................................................................ 4 2.2. Test Site ................................................................................................................................................................. 5 2.3. Description of Test Sample .................................................................................................................................... 5 2.4. Equipment Configuration ....................................................................................................................................... 5 2.5. Support Equipment ................................................................................................................................................ 5 2.6. Ports and Cabling Information ............................................................................................................................... 6 2.7. Mode of Operation ................................................................................................................................................. 7 2.8. Method of Monitoring EUT Operation .................................................................................................................. 7 2.9. Modif…

Text truncated - open the document above for the full version.

Photograph 1. Conducted Emissions, Test Setup Photograph 2. Radiated Emissions, Test Setup Photograph 3. RF Power Output, Test Setup Photograph 4. Radiated Spurious Emissions, Test Setup, 30 MHz – 1 GHz Photograph 5. Radiated Spurious Emissions, Test Setup, Above 1 GHz