ENPESTEEM210MData radio modem

ESTeem MODEL 210 SERIES USER’S MANUAL Models 210C – 210M Manual Revision 1.0 November 2012 Electronic Systems Technology, Inc. 3-'F Author: Date: ame: Eric P. Marske Title: Product Support Manager Approved by: Q /..'{- Date: ,=/r/rz - z:z//1 Name: Tom L. Kirchner Title: President Electronic Systems Technology, I nc. Building Bl 415 N. Quay Street Kennewick, WA 99336 Phone: 509-783-9092 Fax: 509-783-5472 E-mail: [email protected] Web Site: www.esteem.com Copyright@ 2012by Electronic Systems Technology, Inc. All rights reserved. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Electronic Systems Technology. PRODUCT WARRANTY ELECTRONIC SYSTEMS TECHNOLOGY, INC. Specifications subject to change without notice 415 North Quay Street • Kennewick, WA 99336 www.esteem.com Phone (509) 735-9092 • Fax (509) 783-5475 Revised: 5 Dec 2012 Electronic Systems Technology, Inc., (hereinafter EST) expressly warrants its products as free of manufacturing defects for a period of one y ear from the date of sale to first user/customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED AND THERE IS EXPRESSLY EXCLUDED ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO OTHER WARRANTY GIVEN BY ANY EMPLOYEE, AGENT, DISTRIBUTOR OR OTHER PERSON WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON EST. LIMITATION OF LIABILITY: EST's liability shall be limited to refunding of purchase price, repair or replacement of product. IN NO EVENT SHALL EST HAVE LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES CAUSED DIRECTLY OR INDIRECTLY BY THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY INTERRUPTION OF SERVICES, LOSS OF BUSINESS OR ANTICIPATORY PROFITS. IN NO EVENT SHALL EST BE LIABLE FOR ANY DAMAGES WHATSOEVER IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT. In the event that a unit or part requires replacement or factory servicing, the following conditions apply: a) Customer must obtain from EST an authorized RMA (Return Materials Authorization) Number before shipment of product or parts to EST for any reason; b) If the whole unit is shipped, it must be in its original carton and shipping components, or a carton and shipping components supplied by EST, or it parts only are shipped, they must be packaged and cushioned so as to prevent damage in transit and shipped freight prepaid; PRODUCT WILL BE CONSIDERED OUT OF WARRANTY IF: a) If the product is damaged due to improper or abnormal use, abuse, mishandling, accident or improper maintenance or failure to follow operating instruction; b) If the product is defective as a result of sand, dirt, or w ater damage; c) If any factory-sealed enclosure has been opened or show s evidence of an attempt to be opened; d) If defects or damage are caused by the use of unauthorized parts or unauthorized service; e) If the product has had its serial numbers altered or removed. Warranty repair form must be accompanied by proof of user' s purchase of unit. Product must be shipped to the manufacturer at the following address: Electronic Systems Technology 415 North Quay Street Kennewick, Washington USA 99336 ADDITIONAL SERVICE: If EST releases an improvement update to firmware internal to the EST eem unit during the 90 day period after the unit was purchased by the first user/customer, EST will update the applicable unit with the revised version at no charge other than for UPS handling and shipping to and from your location to the EST factory. Return of any such item must be accompanied with proof of purchase. TABLE OF CONTENTS Revised: 5 Dec 12 Page 1 EST P/N AA107-210CM CHAPTER 1 – Introduction Before You Begin 1-1 Model 210 Overview 1-1 Model 210 Configuration Modes 1-1 Access Point M odes ---------------------------------------------1-2 Access Point Repeat er ---------------------------------------------1-3 Self-Healing Mesh Network ---------------------------------------------1-3 Station Modes ---------------------------------------------1-4 RS-232 Serial Applicat ions ---------------------------------------------1-5 CHAPTER 2 – Starting Out Three Configuration Phases 2-1 Model 210 Hardware Description 2-1 Front Panel Layout ---------------------------------------------2-2 Antenna Connection Overview ---------------------------------------------2-2 CHAPTER 3 – Example Applications Modes of Operation Description and Examples 3-1 Ethernet Bridge Mode ---------------------------------------------3-1 Router Modes ---------------------------------------------3-3 Mobile Client Modes ---------------------------------------------3-4 Programming Examples 3-7 Using ESTeem Network Configuration (ENC) Utility ---------------------------------------------3-7 Example 1 – Point to Point Ethernet Bridge ---------------------------------------------3-9 Example 2 – Point to Point Ethernet Bridge with Repeater ---------------------------------------------3-10 Example 3 – Point to Multipoint with Mesh Repeater ---------------------------------------------3-11 Example 4 – Point to Multipoint Router Mode ---------------------------------------------3-13 Example 5 – Mobile Client Mode ---------------------------------------------3-15 Example 6 – Access Poin t Mode ---------------------------------------------3-16 Router Addressing Ex amples ---------------------------------------------3-17 CHAPTER 4 – Utilities and Features ESTeem Network Configuration (ENC) Utility --------------------------------------------- 4-1 Using ESTeem Discovery Program --------------------------------------------- 4-2 Using EtherStation Status Program --------------------------------------------- 4-5 Setting Local Time 210 --------------------------------------------- 4-6 Configuring Time Serv er --------------------------------------------- 4-7 Simple Network Management Protocol (SNMP) -----…

Text truncated - open the document above for the full version.

April 24th,. 2013 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Jenny Gibbs of Nemko USA, Inc. at 802 N Kealy Avenue, Lewisville TX 75057 to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Electronic Systems Technology, Kennewick, Wa 99336. Dated this24th Day ofApril 20 13 Agency agreement expiration date:24 April 2014 By:Todd Elliott Signature Printed Title:Sr. Engineer On behalf of :Electronic Systems Technology Telephone:509-735-9092 ELECTRONIC SYSTEMS TECHNOLOGY, INC. 415 North Quay St. • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475 1 of 1

April 19th, 2013 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: ENPESTEEM210M Product Name: 210m Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: Schematics Block diagram Bill of Materials Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this19th Day ofApril 20 13 By:Todd Elliott Signature Printed Title:Sr. Engineer On behalf of :Electronic Systems Technology Telephone:509-735-9092 ELECTRONIC SYSTEMS TECHNOLOGY, INC. 415 North Quay St. • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475 1 of 1

Dear Sir/Madam As per requirement, attached please find the “attestation_of_frequency_programming” letter. “EF “ was added to the FCC grant as well. Form 731 Confirmation Number: TC318471 FCC ID: ENPESTEEM210M Thanks for your help with this filing. Best Regards Xu Jin Nemko Canada

210m Label Location ELECTRONIC SYSTEMS TECHNOLOGY, INC. 415 North Quay St. • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475 1 of 1

210m Label Location ELECTRONIC SYSTEMS TECHNOLOGY, INC. 415 North Quay St. • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475 1 of 1

April 19th, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Tune-up Procedure To Whom It May Concern, The 210 is tuned during factory production and requires no additional tuning by the installer or end user. Sincerely, Engineer ELECTRONIC SYSTEMS TECHNOLOGY, INC. 415 North Quay St. • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475 1 of 1

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:36.0(dBm)* Maximum peak output power at antenna input terminal:3981(mW) Antenna gain(maximum):5.15(dBi)* Maximum antenna gain:3.27(numeric) Time Averaging:100(%)* Prediction distance:200(cm)* Prediction frequency:150(MHz)* MPE limit for uncontrolled exposure at prediction frequency:0.200(mW/cm^2) Power density at prediction frequency:0.026 (mW/cm^2) This equates to:0.26 W/m^2 2 4R PG S  

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:36.0(dBm)* Maximum peak output power at antenna input terminal:3981(mW) Antenna gain(maximum):10.2(dBi)* Maximum antenna gain:10.47(numeric) Time Averaging:100(%)* Prediction distance:200(cm)* Prediction frequency:150(MHz)* MPE limit for uncontrolled exposure at prediction frequency:0.200(mW/cm^2) Power density at prediction frequency:0.083 (mW/cm^2) This equates to:0.83 W/m^2 2 4R PG S  

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:36.0(dBm)* Maximum peak output power at antenna input terminal:3981(mW) Antenna gain(maximum):0(dBi)* Maximum antenna gain:1.00(numeric) Time Averaging:100(%)* Prediction distance:50(cm)* Prediction frequency:150(MHz)* MPE limit for uncontrolled exposure at prediction frequency:0.200(mW/cm^2) Power density at prediction frequency:0.127 (mW/cm^2) This equates to:1.27 W/m^2 2 4R PG S  

Nemko Test Report: 10240230RUS1 Applicant: Electronic Systems Technology, Inc 415 N. Quay Street Building B-1 Kennewick, WA 99336 Equipment Under Test: 210M (E.U.T.) FCC ID: ENPESTEEM210M IC ID: 2163A-ESTEEM210M In Accordance With: FCC Part 90, Subpart I and Industry Canada RSS-119, Issue 11 Private Land Mobile Transmitter Tested By: Nemko USA Inc. 802 N. Kealy Lewisville, TX 75057-3136 TESTED BY: DATE: 05-Apr-13 David Light, Senior Wireless Engineer APPROVED BY: DATE: 19-Apr-13 Michael Cantwell, Reviewer Total Number of Pages: 45 Nemko USA FCC PART 90, SUBPART I & Industry Canada RSS-119 EQUIPMENT: 210M PROJECT NO.: 10240230RUS1 Page 2 of 45 Table of Contents Section 1.0 Summary of Test Results .......................................................................... 3 Section 2.0 General Equipment Specification .............................................................. 5 Section 3.0 RF Power Output ...................................................................................... 7 Section 4.0 Modulation Characteristics ........................................................................ 8 Section 4.1 Modulation Limiting ................................................................................... 9 Section 5.0 Occupied Bandwidth ............................................................................... 10 Section 6.0 Spurious Emissions at Antenna Terminals .............................................. 14 Section 7.0 Field Strength of Spurious Emissions ..................................................... 18 Section 8.0 Frequency Stability ................................................................................. 21 Section 9.0 Transient Frequency Behavior ................................................................ 23 Section 10.0 Receiver Spurious Emissions ................................................................. 28 Test Results – Radiated Emissions (below 1 GHz) ....................................................... 29 Test Results – Radiated Emissions (above 1 GHz) ...................................................... 32 Section 11.0 Test Equipment List ................................................................................ 35 ANNEX A - TEST METHODOLOGIES .......................................................................... 36 ANNEX B - TEST DIAGRAMS ...................................................................................... 42 Nemko USA FCC PART 90, SUBPART I & Industry Canada RSS-119 EQUIPMENT: 210M PROJECT NO.: 10240230RUS1 Page 3 of 45 Section 1.0 Summary of Test Results Manufacturer: Electronic Systems Technology Model No.: 210M Serial No.: None General: All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 90, Subpart I and Industry Canada RSS-119, Issue 11 New Submission Production Unit Class II Permissive Change Pre-Production Unit THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. Nemko USA, Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety, for use by the company’s employees only. This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Nemko USA, Inc. is a NVLAP accredited laboratory. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA, Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko USA FCC PART 90, SUBPART I & Industry Canada RSS-119 EQUIPMENT: 210M PROJECT NO.: 10240230RUS1 Page 4 of 45 Summary of Test Data NAME OF TEST PARA. NO. RESULT RF Power Output 90.205 Complies Audio Frequency Response TIA EIA-603.3.2.6 N/A 1 Audio Low-Pass Filter Response TIA EIA-603.3.2.6 N/A 1 Modulation Limiting TIA EIA-603.3.2.6 Complies Occupied Bandwidth 90.210 Complies Spurious Emissions at Antenna Terminals 90.210 Complies Field Strength of Spurious Emissions 90.210 Complies Frequency Stability 90.213 Complies Transient Frequency Behavior 90.214 Complies Receiver Spurious Emissions RSS-GEN Complies Footnotes: 1. The radio is data only. There are no voice or audio circuits. . Nemko USA FCC PART 90, SUBPART I & Industry Canada RSS-119 EQUIPMENT: 210M PROJECT NO.: 10240230RUS1 Page 5 of 45 Section 2.0 General Equipment Specification Transmitter Supply Voltage Input: 12Vdc Frequency Range: 150 to 174 MHz Tunable Bands: 150 to 174 MHz Necessary Bandwidth: 11.25 kHz (12.5 kHz channel spacing), 6 kHz (6.25 kHz channel spacing) Type(s) of Modulation: F3E (Voice) F1D F2D D7W Other Internal/External Data Source: Internal data modulation circuits Emission Designator: 6K00D7W, 11K3D7W Output Impedance: 50 ohms RF Power Output (rated): 4 watts pk. Channel Spacing(s): 6.25kHz and 12.5kHz Operator Selection of Operating Frequency: Software Controlled Power Output Adjustment Capability: Software Controlled Nemko USA FCC PART 90, SUBPART I & Industry Canada RSS-119 EQUIPMENT: 210M PROJECT NO.: 10240230RUS1 Page 6 of 45 System Description The ESTeem Model 210m with one Ethernet port (10/100/1G) and one independent Serial RS-232C data port is the perfect radio solution designed for the rigors of the Industrial, Public Safety, and Federal markets when the low VHF band is needed for terrain coverage. System Diagram Nemko USA FCC PART 90, SUBPART I & Industry Canada RSS-119 EQUIPMENT: 210M PROJECT NO.: 10240230RUS1 Page 7 of 45 Section 3.0 RF Power Output NAME OF TEST: RF Power Output PARA. NO.: 2.985 TESTED BY: David Light DATE: 02 April 2013 Measurement Results: Complies. Measurement Data: Frequen…

Text truncated - open the document above for the full version.