F5312GS3125GSM/GPRS Alarm Communicator

GS3125/GS3105 Comunicadores de Alarmas GSM/GPRS Comunicadores de Alarme GSM/GPRS EE EE E PP PP P GSM/GPRS Alarm Communicators GG GG G 2 No. E ComponentesP ComponentesG Parts 1 Antena GSMAntena GSMGSM Antenna 2 Base magnética Base magnética Magnetic base 3 Cable de antena Cabo da antena Antenna cable 4 Conector SMA para antena GSM Conector SMA para antena GSM Connector SMA for GSM Antenna 5 LED de controlLEDs de controlo Status LEDs 6 Tarjeta SIMAlojamento cartão SIM SIM holder 7 Orificios de fijación de la tarjeta Furos de fixação da placa P.C.B. fixing holes 8 Tarjeta SIMCartão SIMSIM CARD 9 Conector de cable para la programación vía PC Conector do cabo para a programação com o PC Cable connector for programming via PC 10 Regleta de terminales para las conexiones Bloco de terminais para as ligações Terminal Blocks 11 Abertura para paso de cable de la antena Abertura para passagem de cabos Antenna cable feed opening 12 Orificios de fijación de estribo metálica Furos de fixação do suporte metálico Metal bracket fixing holes 13 Estribo metálico Suporte metálico Metal bracket 14 Soporte plástico adhesivo Suporte de plástico adesivo Adesive plastic suppor t 15 Desviador antisabotaje (opcional) Desviador anti- sabotagem (opcional) Tamper switch (optional) 16 Soporte tarjetaSuporte placaP.C.B. support 17 Base metálicaFundo metálicoMetal base 18 TapaTampaCover 19 Orificios de fijación de la base Furos de fixação do fundo Base fixing holes 20 Pernos de fijación del Desviador Antisabotaje Pinos de fixação do desviador anti- sabotagem Tamper switch fixing pins 21 Tuercas para la fijación del Desviador Antisabotaje Porcas para a fixação do desviador anti- sabotagem Tamper switch fixing nuts 22 Abertura en la base para el paso de los cables Abertura, no fundo, para a passagem dos cabos Cable feed opening on the base 23 Abertura en la base para el paso cable antena Abertura, no fundo, para a passagem do cabo da antena Antenna wire feed opening on the base 24 Orificios de fijación de la tapa Furos de fixação da tampa Cover fixing holes 25 Tornillos para fijar la tapa Parafusos de fixação da tampa Cover fixing screws 26 Lengüeta sujeta cable Lingueta de fixação do cabo Cable clamp tab 27 Orificios para la introducción de los soportes tarjeta Furos para a introdução dos suportes da placa Holes for the insertion of P.C.B. supports 3 PP PP P GG GG G EE EE E Fig. 1 - Identificación de los componentes - Identificação dos componentes - Parts GS3105-K/GS3125-K GS3105-BA/GS3125-BA GS3100-BX 1 12 12 11 13 2 3 14 4 7 7 7 9 7 10 10 5 6 8 2 1 2 5 16 1 6 27 2 7 19 19 19 15 20 20 22 21 25 21 9 7 7 7 7 6 24 24 18 26 2 7 27 19 2 3 2 3 17 4 1 0 1 0 2 5 2 7 2 7 19 19 19 20 20 22 2 5 24 24 18 1 2 1 6 3 4Comunicadores de Alarmas GSM/GPRS INDICE Para programar este dispositivo, utilizar el software GS3100 Series Console Versión 3.0 ó superior. DSC (Digital Security Controls) declara que la serie GS3105 y GS3125 es conforme con las condiciones esenciales y con las otras disposiciones establecidas por la Directiva 1999/5/CE. La Declaración de Conformidad completa puede obtenerse en la 'dirección: www.dsc.com Este dispositivo está en conformidad con EN 50136-1-1 y EN 50126-2-1, con prestaciones del Sistema de Transmisión Alarma ATS 2. La instalacion de los dispositivos debe efectuarse de modo adecuado, de acuerdo con las normas vigentes. Estos aparatos se han desarrollado según los criterios de calidad, fiabilidad y prestaciones adoptadas por DSC. Se recomienda verificar el buen funcionamiento del sistema al menos una vez al mes. Los procedimientos para la revisión dependen de la configuración del sistema. Pedir al instalador de los sistemas los procedimientos a seguir. DSC declina toda responsabilidad en caso de manipulación de los aparatos por las personas no autorizadas. El contenido de este Manual puede estar sujeto a modificaciones sin aviso previo y no representa compromiso alguno por parte de DSC. INTRODUCCIÓN ........................................................... 5 Características Generales........................................................ 5 Características Técnicas......................................................... 5 Descripción general................................................................. 6 IDENTIFICACION DE LOS COMPONENTES.......... 6 INSTALACION............................................................... 6 GS3105-K ó GS3125-K............................................................ 6 GS3105-BA, GS3125-BA ó GS3100-BX................................... 7 CONEXIONES................................................................ 8 Conexiones auxiliares ............................................................ 8 LED DE CONTROL.................................................... 10 PRINCIPIOS DE FUNCIONAMIENTO................... 11 Restablecimiento Programación de Fábrica............................ 11 Canal predefinido PSTN......................................................... 11 Canal predefinido GSM........................................................... 11 Secuencia de transmisión Contact ID sobre GPRS.................. 11 Avisador SMS (sólo para la serie GS3125).............................. 12 Avisador Vocal (sólo para la serie GS3125)............................ 12 Gestión de Prioridades (sólo para la serie GS3125)................. 13 Prioridad a la Línea Telefónica Simulada ...................................... 1 3 Prioridad Avisador SMS................................................................... 1 3 Prioridad de los Eventos del Avisador............................................ 1 3 Control crédito residual (sólo para la serie GS3125)................. 14 (PTM) control de las comunicaciones con la central................ 14 ACTIVACIÓN DE LAS SALIDAS............................ 14 Activación y desactivación de las salidas Automáticas.................. 1 4 Activación y desactivación de las salidas distantes ............... 14 GS3105..............................…

Text truncated - open the document above for the full version.

Digital Security Controls 3301 Langstaff Road Concord, Ontario Canada L4K 4L2 Tele: 905 760 3000 Toll Free: 888 888 7838 www.dsc.com May 28, 2012 Equipment Authorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: F5312GS3125 Product Name: GSM/GPRS Alarm Communicator Model: GS3125-K and GS3125-BA Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Parts List  Block diagram  Operational description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 28 th Day of May 2012 By: Dan Nita Signature Printed Title: Approval Manager On behalf of : Digital Security Controls Telephone: 905-760-3000, Ext. 2706

Digital Security Controls 3301 Langstaff Road Concord, Ontario Canada L4K 4L2 Tele: 905 760 3000 Toll Free: 888 888 7838 www.dsc.com May 28, 2012 To Whom It May Concern: Subject: Validity of Test Results from Testing / Certification of the integrated Module WE, DIGITAL SECURITY CONTROLS, A DIV. OF TYCO SAFETY PRODUCTS CANADA LTD., 3301 LANGSTAFF RD., CONCORD, ON L4K4L2 CANADA This is to confirm that that the results from conducted tests applied to the radio module SIMCOM, model SIM900, FCC ID:UDV-0912142009007, IC:8460A-20100108007 which is incorporated in our host equipment DSC, model GS3125, FCC ID: F5312GS3125, IC: 160A-GS3125 and as reported in module test report SHEMO09120140807, issue date 2010/02/08 accurately represent the test results under the new conditions when the identified radio module is integrated in the identified host equipment. By integration of the said radio module into the identified host equipment no changes were made to it or by external adaptation circuitry that impacts the validity of the results of the original module’s test reports. Dan Nita Approvals Manager +1 905-760-3000 Ext. 2706

May 28, 2012 To Whom It May Concern: Respectfully yours, Dan Nita Approvals Manager

March 3, 2012 Dan Nita Approvals Manager Digital Security Controls 3301 Langstaff Road, Concord ON, Canada, L4K 4L2 Authorization Letter To whom it may concern, This letter is to certify that SIMCom authorized Digital Security Controls to use SIMCom’s FCC/IC test reports for all DSC products (Model GS3125) that uses SIM900 module. Sincerely, Name: Title: FAE Director Shanghai SIMCom Wireless Solutions Limited

COLOR NR. 3 COLOR NR. 2 COLOR NR. 1 ARTWORK MATERIAL P/N LABEL SPECIFICATIONS NOTES PRINTING METHOD MATERIAL DESCRIP. PRINTING FILE VOLUME BENTEL SECURITY srl DESCR. BRAND LEVELS SCALE + + + + + + + + LANG. SOFT. FILE COD. REV. DESIGNED FORDRAFTSMAN DATE SIGN NOTES N/A 1 color BLACK N/A N/A \\Teo1fil02\etichette\gs3125ba\etidtd2e\r00.lbl Unless otherwise specified dimensions are in mm. GS3125BA B5.0 ENGLISH DSC new ETIDTD2EGS3125BA 0.0 22/05/2012 GS3125-BA 60X30 ETICHET.DATI 0.0 ETIDTD2EGS3125BA 1:1 Gianni Santori Label ArtworkDimensionsPlacement 60.0 Placement 30.0 Type of signalling: PSDN This device complies with Part 15 Class B of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the ICES-003. Cet appareil numérique de la classe B respecte toutes les exigences du ICES-003. Electrical Ratings: 10 - 27.6 V _ FCC ID: F5312GS3125 US:F53KX00GS3125 IC:160A-GS3125 ANATEL: XXXXXCNC: XXXX EN50131-1 Grade 2 / Class II EN50136-1-1 & -5 ATS 2 M/N: GS3125-BA GSM/GPRS Alarm Communicator HIGH VOLTAGE. DISCONNECT POWER AND TELEPHONE LINES PRIOR TO SERVICING. WARNING ETIDTD2EGS3125BA 0.0 MADE IN ITALY COLOR NR. 3 COLOR NR. 2 COLOR NR. 1 ARTWORK MATERIAL P/N LABEL SPECIFICATIONS NOTES PRINTING METHOD MATERIAL DESCRIP. PRINTING FILE VOLUME BENTEL SECURITY srl DESCR. BRAND LEVELS SCALE + + + + + + + + LANG. SOFT. FILE COD. REV. DESIGNED FORDRAFTSMAN DATE SIGN NOTES N/A 1 color BLACK N/A N/A \\Teo1fil02\etichette\gs3125k\etidtd2e\r00.lbl Unless otherwise specified dimensions are in mm. GS3125K B5.0 ENGLISH DSC new ETIDTD2EGS3125K 0.0 24/05/2012 GS3125-K 57X32 ETICHET.DATI 0.0 ETIDTD2EGS3125K 1:1 Gianni Santori Label ArtworkDimensionsPlacement Type of signalling: PSDN This device complies with Part 15 Class B of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the ICES-003. Cet appareil numérique de la classe B respecte toutes les exigences du ICES-003. Electrical Ratings: 10 - 27.6 V _ FCC ID: F5312GS3125 US:F53KX00GS3125 IC:160A-GS3125 ANATEL: XXXXXCNC: XXXX EN50131-1 Grade 2 / Class II EN50136-1-1 & -5 ATS 2 M/N: GS3125-K GSM/GPRS Alarm Communicator HIGH VOLTAGE. DISCONNECT POWER AND TELEPHONE LINES PRIOR TO SERVICING. WARNING ETIDTD2EGS3125K 0.0 MADE IN ITALY Placement Type of signalling: PSDN This device complies with Part 15 Class B of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the ICES-003. Cet appareil numérique de la classe B respecte toutes les exigences du ICES-003. Electrical Ratings: 10 - 27.6 V _ FCC ID: F5312GS3125 US:F53KX00GS3125 IC:160A-GS3125 ANATEL: XXXXXCNC: XXXX EN50131-1 Grade 2 / Class II EN50136-1-1 & -5 ATS 2 M/N: GS3125-K GSM/GPRS Alarm Communicator HIGH VOLTAGE. DISCONNECT POWER AND TELEPHONE LINES PRIOR TO SERVICING. WARNING ETIDTD2EGS3125K 0.0 MADE IN ITALY 57.0 32.0

Digital Security Controls 3301 Langstaff Road Concord, Ontario Canada L4K 4L2 Tele: 905 760 3000 Toll Free: 888 888 7838 www.dsc.com May 28, 2012 Product Name: DSC GSM/GPRS Alarm Communicator Model: GS3125-K and GS3125-BA FCC ID: F5312GS3125 IC: 160A-GS3125 To Whom It May Concern: This is to confirm that for the DSC GSM/GPRS Alarm Communicator, Model GS3125 there is no end user/service person tune up procedure and the final tune up is all done at the SIMCOM factory. There is no cellular/PCS output power tuning done at Digital Security Control’s manufacturing side on end-product level. Respectfully yours, Dan Nita Approvals Manager

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S = power density P = output power G = antenna gain R = distance 22H24E Output Power33.10(dBm)30.30(dBm) Output Power2042(mW)1072(mW) Antenna Gain-1(dBi)-1(dBi) Antenna Gain0.79(numeric)0.79(numeric) Distance20(cm)20(cm) Duty Cycle:25(%)25(%) Frequency824.2(MHz)1851.25(MHz) MPE Limit General Public0.549(mW/cm^2)1.0(mW/cm^2) Power Density0.08(mW/cm^2)0.04(mW/cm^2) Margin8.33(dB)13.7(dB) 2.1091EIRP32.10(dBm)29.30(dBm) ERP29.96(dBm)27.16(dBm) Duty Cycle25.00(%)25.00(%) ERP0.25(W)0.13(W) ERP Limit1.5(W)3(W) Margin7.82(dB)13.6(dB) 22.913ERP Limit7(W) ERP0.99(W) 24.232EIRP Limit 2(W) EIRP0.85(W) Margin8.49(dB)3.71(dB) 2 4R PG S p =

SGS-CSTC Standards Technical Services （ （（ （Shanghai） ）） ） Co., Ltd. 588 West Jindu Road, Songjiang District, Shanghai, China Telephone: +86 (0) 21 6191 5666 Fax: +86 (0) 21 6191 5655 [email protected] Report No.:SHEMO09120140807 Page 1 of 43 Tino Pan Jack Wu E&E Section Manager E&E EMC Engineer SGS-CSTC(Shanghai) Co., Ltd. SGS-CSTC(Shanghai) Co., Ltd. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only Member of the SGS Group (Société Générale de Surveillance) TEST REPORT Application No. : SHEMO09120140807 Applicant: Shanghai Simcom Ltd. FCC ID: UDV-0912142009007 IC ID: 8460A-20100108007 Equipment Under Test (EUT): Product Name: SIM900 Brand Name: SIMCOM Model No.: SIM900 Standards: IC RSS 132 Issue 2,RSS 133 Issue 5/ FCC part 2, 22H & 24E Date of Receipt: Jan 04, 2010 Date of Test: Jan 05, 2010 to Feb 08,2010 Date of Issue: Feb 08,2010 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 2 of this report for further details. SGS-CSTC Standards Technical Services （ （（ （Shanghai） ）） ） Co., Ltd. ReportNo.: SHEMO09120140807 Page: 2 of 43 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 2 Test Summary Description of Test FCC Rules IC Rules Result RF Power Output 2.1046(a) 22.913(a) 24.232(b) RSS-132,4.4 RSS-133,6.4 Compliant 99% Occupied Bandwidth 2.1049(h) RSS-Gen,4.6 Compliant Effective Isotropic Radiated Power 2.1046(a) 22.913(a) 24.232(b) RSS-132,4.4 RSS-133,6.4 Compliant Out of Band Emissions at antenna Terminals and Band Edge 2.1051 22.917(a) 24.238(a) RSS-132,4.5 RSS-133,6.5 Compliant Field Strength of Spurious Emissions 2.1053 22.917(a) 24.238(a) RSS-132,4.5 RSS-133,6.5 Compliant Frequency Stability vs. Temperature and Voltage 2.1055 RSS-132,4.3 RSS-133,6.3 Compliant SGS-CSTC Standards Technical Services （ （（ （Shanghai） ）） ） Co., Ltd. ReportNo.: SHEMO09120140807 Page: 3 of 43 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY.................................................................................................................................................... 2 3 CONTENTS...................................................................................................................................................…

Text truncated - open the document above for the full version.

FCC 22, 24,RSS 132,133.doc - Date: May 2012 www.nemko.com Compliance test report ID 206838-1TRFWL Date of issue May 29, 2012 FCC Part 22 Subpart H: Cellular radiotelephone service. (Partial testing) FCC Part 24 Subpart E: Personal communications services. (Partial testing) RSS-132 Issue 2, 2005-09: Cellular telephones employing new technologies operating in the bands 824–849 MHz and 869–894 MHz. (Partial testing) RSS-133 Issue 5, 2009-02: 2 GHz personal communications services. (Partial testing) Applicant Digital Security Controls, a Division of Tyco Safety Products Canada Ltd. Product GSM/GPRS Alarm Communicator Model GS3125-K Model variant GS3125-BA FCC ID F5312GS3125 IC 160A-GS3125 Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation SCC Accredited LAB LAB Accrédité CCN TM w w w . n e m k o . c o m Report reference ID: 206838-1TRFWL Page 2 of 18 Test location Nemko Canada Inc. 303 River Road Ottawa, ON, K1V 1H2 Canada Test site FCC ID: 176392 and IC ID: 2040A-4 (3 m semi anechoic chamber) Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Tested by Kevin Rose, Wireless/EMC Specialist Reviewed by May 29, 2012 Andrey Adelberg, Senior Wireless/EMC Specialist Date Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. w w w . n e m k o . c o m Report reference ID: 206838-1TRFWL Page 3 of 18 Table of Contents Table of Contents .......................................................................................................................................................................................... 3 Section 1 Report summary .................................................................................................................................................................... 4 1.1 Applicant and manufacturer .............................................................................................................................................................. 4 1.2 Test specifications ............................................................................................................................................................................ 4 1.3 Statement of compliance ................................................................................................................................................................... 4 1.4 Exclusions......................................................................................................................................................................................... 4 1.5 Test report revision history ................................................................................................................................................................ 4 Section 2 Summary of test results ........................................................................................................................................................ 5 2.1 FCC Part 22, test results ................................................................................................................................................................... 5 2.2 FCC Part 24, test results ................................................................................................................................................................... 5 2.3 RSS-133, test results ........................................................................................................................................................................ 5 2.4 RSS-132, test results ........................................................................................................................................................................ 5 Section 3 Equipment under test (EUT) details ..................................................................................................................................... 6 3.1 Sample information ........................................................................................................................................................................... 6 3.2 EUT information ................................................................................................................................................................................ 6 3.3 Technical information ........................................................................................................................................................................ 6 3.4 Product description and theory of operation ...................................................................................................................................... 6 3.5 EUT exercise details ......................................................................................................................................................................... 6 3.6 EUT setup diagram .........................................................................................................................…

Text truncated - open the document above for the full version.