JQU802295NON-MULTIILATERATION LMS TRANSMITTER AND RECEIVER

Confidential UM 360450-210 Revision: A7 © Kapsch TrafficCom Canada Inc. 2013 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE : UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56 Kapsch TrafficCom JANUS ® MULTI-PROTOCOL READER VER. 2 OPERATOR AND MAINTENANCE MANUAL QMS EDITION - ISO9001:2008 DOCUMENT: UM 360450-210 REVISION: A7 DATE: October 18, 2013 Editor: Michael Kleiza Reviewer Title Reviewer Name Reviewer Signature Director of Programs Ed Rolo Manager, Software Design Dan Terrier Director, Engineering Japjeev Kohli Vice President, Operations Joe Bianchini Vice President, Operations Jason Wall Vice President, Sales and Marketing Paul Manuel Approval Vice President Engineering & Chief Technology Officer Richard Turnock Confidential UM 360450-210 Revision: A7 © Kapsch TrafficCom Canada Inc. 2013 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE : UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56 Kapsch TrafficCom This Page Intentionally Left Blank Confidential UM 360450-210 Revision: A7 © Kapsch TrafficCom Canada Inc. 2013 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE : UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56 Kapsch TrafficCom JANUS® MULTI-PROTOCOL READER VER. 2 OPERATOR AND MAINTENANCE MANUAL QMS EDITION - ISO9001:2008 DOCUMENT: UM 360450-210 REVISION: A7 DATE: October 18, 2013 Kapsch TrafficCom 6020 AMBLER DRIVE 8201 GREENSBORO DRIVE , SUITE 1002 LAGO NYASSA 27, COL. GRANADA MISSISSAUGA, ON L4W 2P1 1. MCLEAN, VA 22102 2. MEXICO CITY, DF 11520 TEL: (905) 624-3025 3. TEL: (703) 885-1976 4. TEL: +52 (55) 8488-5444 FAX: (905) 624-4572 5. FAX: (703) 790-9100 6. FAX: +52 (55) 8488-5444 Confidential UM 360450-210 Revision: A7 Page 2 of 282 © Kapsch TrafficCom Canada Inc. 2013 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE : UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56 Kapsch TrafficCom This Page Intentionally Left Blank Confidential UM 360450-210 Revision: A7 Page 3 of 282 © Kapsch TrafficCom Canada Inc. 2013 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE : UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX 10/31/2013 7:56 Kapsch TrafficCom The transmit antenna system used with the module shall have a net gain (gain from antenna connector on module to radiated signal) constrained by: Gain at operating frequency (in dBd) : Gfund <= 43.77 dBmd - Pout(amb); where Pout(amb) is the power out of the module at ambient in the deployed system in dBm Gain at 2 nd harmonic <= Gfund – 14 dB FCC License Notice: This equipment emits RF signals. In order to operate this equipment the customer must obtain a separate FCC Part 90 Site license for each location. In addition, the FCC ID component identification JQU802295 must appear on a label on the front of the RF Modules installed in these Readers. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense. Changes or modifications not expressly approved by Kapsch TrafficCom could void FCC compliance and the authority to operate the equipment. NOTE: IEC 60950-1 and/or EN60950-1, First Editio…

Text truncated - open the document above for the full version.

Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. Product Name: JANUS® MRFM-S Model Number: 802295-TAB Date: September 25, 2013 Subject: External Pictures JANUS MRFM-S Front Photo FCC/IC Label here Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS Ruggedized MRFM-S front Photo FCC/IC Label here Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS MRFM-S Back Photo Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS Ruggedized MRFM-S back Photo Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS MRFM-S TX side photo Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS Ruggedized MRFM-S Tx side Photo Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS MRFM-S RX section Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS Ruggedized MRFM-S Rx side Photo

Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. These instructions contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. Product Name: JANUS® MRFM-S Model Number: 802295-TAB, 802356-TAB Date: September 25, 2013 Subject: Label Format and Location The regulatory identification label (FCC ID and IC) is identical for all the models requested in this application. The label is shown below.

Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. These instructions contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. Product Name: JANUS® MRFM-S Model Number: 802295-TAB, 802356-TAB Date: September 25, 2013 Subject: Label Format and Location The label location is shown below for the 2 models. 802295 802356

Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. These instructions contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. Product Name: JANUS® MRFM-S Model Number: 802295-TAB Date: September 25, 2013 Subject: External Pictures JANUS MRFM-S TX section – top view Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. These instructions contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. JANUS MRFM-S TX section – bottom view Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. These instructions contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. JANUS MRFM-S RX section – top view Kapsch TrafficCom © 2013 Kapsch TrafficCom Canada Inc., all rights reserved. These instructions contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. JANUS MRFM-S RX section – bottom view

Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 1 of 2 Report issue date: 12/2/2013 GEMC File #: GEMC-FCC-21667R1 Maximum Permissible Exposure Purpose The purpose of this test is to ensure that the RF energy intentionally transmitted, in terms of power density emitted from the EUT at a stated operating distance does not exceed the limits listed below as defined in the applicable test standard, as calculated based upon readings obtained during testing. This helps protect human exposure to excessive RF fields. Limit(s) and Method The limits are defined in FCC 1.1310 Table 1 (B) limits for general public exposure was applied. The limit for the frequency range of 300 MHz to 1500 MHz was applied. This is a limit of 0.61 mW/ cm 2 . Results The distance used for calculations was 100 cm, as this is the minimum distance an operator will be from the EUT during normal operation. The antenna height state in the User Manual is 16 ft. Therefore, no operator will be less than 100 cm from the antenna. The EUT passed the requirements. The worst case calculated power density was 0.55 mW/cm 2 , this is under the 0.61 mW/cm 2 requirement. Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 2 of 2 Report issue date: 12/2/2013 GEMC File #: GEMC-FCC-21667R1 Calculations Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:30.32(dBm) Maximum peak output power at antenna input terminal:1076.465214(mW) Antenna gain(typical):18.1(dBi)*(16 dB + 2.1 = 18.1 dBi) Maximum antenna gain:64.5654229(numeric) Time Averaging:100(%) Prediction distance:100(cm) Prediction frequency:915.75(MHz) E limit for uncontrolled exposure at prediction frequency:0.6105(mW/cm^2) Power density at prediction frequency:0.553083(mW/cm^2) Margin of compliance:0.4(dB) This equates to5.530827786W/m^2PASS 2 4R PG S π =

LAB REGISTRATION #6844A-3 Testing Laboratory Certificate #2555.01 FCC REGISTRATION #377448 R-4023, G-506 T-1246, C-4498 Page 1 of 126 Report issue date: 11/29/2013 GEMC File #:GEMC-FCC-216677R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Glo bal EMC Inc. This report is based on GEMC Template “FCC 15 247 Rev2.” Global EMC Inc. Labs EMC & RF Test Report As per FCC Part 90 Subpart M:2013 & RSS-137 Issue 2:2009 Location and Monitoring Service (LMS) Operation in the 902 – 928 MHz Band on the JANUS® MRFM-S Min Xie Project Engineer Global EMC Labs Inc 11 Gordon Collins Dr, Gormley, ON, L0H 1G0 Canada Ph: (905) 883-8189 Testing produced for See Appendix A for full customer & EUT details . Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 2 of 126 Report issue date: 11/29/2013 GEMC File #: GEMC-FCC-21667R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Justifications, Descriptions, or Deviations......................................................................... 6 Applicable Standards, Specifications and Methods ........................................................... 8 Document Revision Status ................................................................................................. 9 Definitions and Acronyms ................................................................................................... 10 Testing Facility .................................................................................................................... 11 Calibrations and Accreditations ....................................................................................... 11 Testing Environmental Conditions and Dates ................................................................. 12 Detailed Test Results Section .............................................................................................. 13 Occupied Bandwidth ........................................................................................................ 34 Emission Mask ................................................................................................................. 54 Transmitter Spurious Radiated Emissions ....................................................................... 94 Appendix A – EUT Summary ............................................................................................ 109 Appendix B – EUT and Test Setup Photographs............................................................... 111 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 3 of 126 Report issue date: 11/29/2013 GEMC File #: GEMC-FCC-21667R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Report Scope This report addresses the EMC verification testing and test results of Kapsch Traffic Inc’s JANUS® MRFM-S, herein referred to as EUT (Equipment Under Test) performed at Global EMC Labs. There are two models of the EUT: 802295 and 802356. 802295 is the standard rack mount unit and 802356 is a ruggedized hard mount unit. Both units share the same transceiver module. The EUT was tested for compliance against the following standards: FCC Part 90 Subpart M:2013 RSS-137 Issue 2:2009 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. The results contained in this report relate only to the item(s) tested. This report does not imply product endorsement by A2LA or any other accreditation agency, any government, or Global EMC Inc. Opinions/interpretations expressed in this report, if any, are outside the scope of Global EMC Inc accreditation. Any opinions expressed do not necessarily reflect the opinions of Global EMC Inc, unless otherwise stated. Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 4 of 126 Report issue date: 11/29/2013 GEMC File #: GEMC-FCC-21667R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Summary The results contained in this report relate only to the item(s) tested. EUT FCC Certification #, FCC ID: JQU802295 EUT Industry Canada Certification #, IC: 2665A-802295 EUT Passed all tests performed. Yes (see test results summary) Tests conducted by Min Xie Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 5 of 126 Report issue date: 11/29/2013 GEMC File #: GEMC-FCC-21667R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Test Results Summary Standard/Method Description Class/Limit Result FCC 90.205 RSS-137 Clause 6.4 Output Power 30 W Pass FCC 90.207 RSS-137 Clause 6.2 Types of Modulation -- Pass See Justifications FCC 90.209 RSS-137 Clause 6.1.2 Occupied Bandwidth 902 - 904 MHz: 2 MHz 909.75 – 921.75 MHz 12 MHz Pass FCC 90.210 (K) RSS-137 Clause 6.5.3 Spurious antenna port conducted emissions 55 + 10 log10 Pmax dB. Pass FCC 90.210 RSS-137 Clause 6.5.3 Spurious radiated emissions 55 + 10 log10 Pmax dB. Pass FCC 90.213 RSS-137 Clause 6.3 Frequency stability -- N/A See…

Text truncated - open the document above for the full version.

Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 1 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 1: 802356-TAB Radiated emission setup – photo 1 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 2 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 2: 802356-TAB Radiated emission setup - photo 2 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 3 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 3: 802356-TAB Radiated setup - photo 3 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 4 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 4: Antenna conducted emission setup Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 5 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 5: 802356-TAB Power line conducted emission setup – photo 1 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 6 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 6: 802356-TAB Power line conducted emission – photo 2 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 7 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 7: 802356-TAB Radiated emission setup – photo 1 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 8 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 8: 802356-TAB Radiated emission setup – photo 2 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 9 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 9: 802356-TAB Radiated emission setup – photo 3 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 10 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 10: 802356-TAB Power line conducted emission setup – photo 1 Client Kapsch TrafficCom Canada Inc Product JANUS® MRFM-S Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2013 Page 11 of 11 Report issue date: 11/14/2013 GEMC File #: GEMC-FCC-21667R1 Illustration 11: 802356-TAB Power line conducted emission setup – photo 2