JQU802295ANon-multilateration LMS transmitter and receiver

Confidential UM 360463-202 Revision: A12 (Draft) © Kapsch TrafficCom Canada Inc. 2014 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24 Kapsch TrafficCom JANUS® MULTI-PROTOCOL READER VER. 2 OPERATOR AND MAINTENANCE MANUAL QMS EDITION - ISO9001:2008 DOCUMENT: UM 360463-202 REVISION:A12 (Draft) DATE: May 8, 2014 Kapsch TrafficCom 6020 AMBLER DRIVE 8201 GREENSBORO DRIVE , SUITE 1002 MISSISSAUGA, ON L4W 2P1 1. MCLEAN, VA 22102 TEL: (905) 624-3025 2. TEL: (703) 885-1976 FAX: (905) 624-4572 3. FAX: (703) 790-9100 Confidential UM 360463-202 Revision: A12 (Draft) Page 2 of 291 © Kapsch TrafficCom Canada Inc. 2014 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24 Kapsch TrafficCom This Page Intentionally Left Blank Confidential UM 360463-202 Revision: A12 (Draft) Page 3 of 291 © Kapsch TrafficCom Canada Inc. 2014 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24 Kapsch TrafficCom FCC License Notice: This equipment emits RF signals. In order to operate this equipment the customer must obtain a separate FCC Part 90 Site license for each location. In addition, the FCC ID component identification JQU802295 must appear on a label on the front of the RF Modules installed in these Readers. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense. Changes or modifications not expressly approved by Kapsch TrafficCom could void FCC compliance and the authority to operate the equipment. The Power output of a module at ambient (Pout(amb)) shall be constrained using internal or external TX attenuation so that the following is satisfied: Pout(amb): Gfund <= 43.77 dBmd - Gfund; Where Gfund is the net gain from antenna connector on the RF module to the antenna radiated signal where the antenna gain is expressed in dBd. NOTE: IEC 60950-1 and/or EN60950-1, First Edition, Information Technology Equipment – Safety – Part 1: General Requirements require that this equipment must be located in a RESTRICTED ACCESS LOCATION (RAL). Only authorized personnel can have access to the equipment. Confidential UM 360463-202 Revision: A12 (Draft) Page 4 of 291 © Kapsch TrafficCom Canada Inc. 2014 These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc. FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24 Kapsch TrafficCom SOFTWARE/FIRMWARE NOTE The current software set is identified in the Software Release document. The active Reader firmware version is displayed in the Reader browser interface. FACTORY SUPPORT SERVICE For Return Material Authorization (RMA) numbers please telephone: 905 624-3020. For Kapsch Service information and other requests please FAX: 905 624-4572. NOTICE The information presented in this document is current although it is subject to change. As such, Kapsch TrafficCom assumes no liability on behalf of the USER with respect to interpretation based on the use of this information Kapsch TrafficCom ©2014 COPYRIGHT STATEMENT This technical manual contains confidential and proprietary information and is the property of Kapsch TrafficCom and is issued in strict confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch Traffi…

Text truncated - open the document above for the full version.

Kapsch TrafficCom 1 Product Name: JANUS® MRFM-S Model Number: 802295-TAB Date: April 21, 2014 Subject: User Manual 1 INTRODUCTION The JANUS™ Multi-Protocol RF Module-Smart (MRFM-S) is not supplied as a stand-alone item but integrated with or intended for integration with a Kapsch reader. As such there is no separate manual for the MRFM-S; instead it is covered by the reader user manual UM 360450-210 which is attached.

Page 1 Kapsch TrafficCom Canada Inc. | 6020 Ambler Drive | Mississauga, Ontario L4W 2P1 Canada | Phone 905 624 3020 | Fax 905 624 4572 | www.kapsch.net Equipment Authorization Division Federal Communications Commission Request for Short Term Confidential Treatment of Exhibits to Application for Equipment Authorization for the JANUS® Multi-Protocol RF Module Smart product, proposed FCC ID: JQU802295A On behalf of Kapsch TrafficCom Canada Inc (“Kapsch”), we request short term confidential treatment for the following exhibits filed with Kapsch’s application for equipment authorization for the product model 802295, with FCC ID JQU802295A which is being filed concurrently: USER MANUAL INTERNAL PHOTOS KAPSCH requests that this exhibit be treated as confidential and withheld from public inspection until the device is publically marketed in accordance with Section 0.457(d) (trade secrets) of the Commission's Rules, pursuant to Section 0.459(b) of the Commission's rules. KAPSCH competes with a number of companies that are developing and marketing products for the same market. The internal design of new products including, but not limited to, component selection, RF layout, mechanical and assembly approach, is considered a trade secret and is not publically provided outside of the company. The internal photographs disclose such detail. Pre-marketing disclosure of such information to competitors will compromise KAPSCH’s competitive edge. Sincerely, Dated this 30 Day of April 2014 By Richard Turnock Title Chief Technical Officer Telephone +1 905-624-3020 X 7900 On Behalf Of Kapsch TrafficCom Canada Inc.

Page 1 Kapsch TrafficCom Kapsch TrafficCom Canada Inc. | 6020 Ambler Drive | Mississauga, ON L4W 2P1 | Canada | Phone 905 624 3020 | Fax 905 625 6197 | www.kapsch.ca Equipment Authorization Division Federal Communications Commission Request for Permanent Confidential Treatment of Exhibits to Application for Equipment Authorization for the JANUS® Multi-Protocol RF Module Smart, proposed FCC ID JQU802295A On behalf of Kapsch TrafficCom Canada Inc. (“Kapsch”), we request confidential treatment for the following exhibits filed with Kapsch’s application for equipment authorization for the model, JQU802295A being filed concurrently: OPERATION DESCRIPTION and BLOCK DIAGRAM SCHEMATICS PARTS LISTS TUNE UP KAPSCH requests that these exhibits be treated as confidential and withheld from public inspection in accordance with Section 0.457(d) (trade secrets) of the Commission's Rules, pursuant to Section 0.459(b) of the Commission's rules. These exhibits were submitted to the commission in support of KAPSCH’s application for equipment authorization and provide the additional detail needed for the Agency’s staff to properly evaluate the equipment. KAPSCH’s practice to file a request for confidentiality at the time it submits an application for equipment authorization is intended to provide information relevant to the FCC Processing of its application without public disclosure of proprietary information. These exhibits contain highly confidential and proprietary technical information about the equipment design and operating characteristics and internal construction. KAPSCH provides the following information in support of its request for confidential treatment of these exhibits: (1) This equipment is used for intelligent transportation systems (ITS) applications, primarily roadway safety enforcement, traffic monitoring, and tolling operations applications. Its design is intended to meet the stringent robustness and security requirements of the 24 member E-ZPass Interagency Group of toll authorities operating in 13 states in the northeast, who are responsible for collecting billions of dollars in toll revenue annually. (2) These applications are public services that are largely deployed and managed by government agencies. The integrity and security of these systems is critical to their ongoing operation, and they require Page 2 Kapsch TrafficCom Kapsch TrafficCom Canada Inc. | 6020 Ambler Drive | Mississauga, ON L4W 2P1 | Canada | Phone 905 624 3020 | Fax 905 625 6197 | www.kapsch.ca that the product design inhibit the production of counterfeit devices and the avoidance of roadway safety enforcement or toll payments. One aspect of that security is to restrict casual view of the internal workings of the KAPSCH equipment. (3) This equipment is expected to be used for more than a decade in some cases. Moreover, this equipment will be used in revenue collection (i.e. toll collections) where it is important that its design and operational details not be made available to unauthorized persons who might attempt to use knowledge of such details to compromise the applications for which the equipment will be employed. (4) There is no value to a member of the public modifying this equipment to operate outside the FCC granted performance since they cannot provide any added functionality beyond the purposes of the contract with the agency. There is no incentive to a member of the public modifying them to operate outside the FCC granted performance since it could prevent them achieving the benefits of the contract. (5) Further, KAPSCH competes with a number of companies that are developing and marketing similar RF Modules for ITS applications. Disclosure of such information to competitors could compromise KAPSCH’s ability to develop this technology, in that other companies could reverse engineer products using this information. (6) Disclosure would cause KAPSCH to relinquish valuable proprietary information about the technologies it has developed and its manufacturing processes. Disclosure would also offer competitors an unwarranted insight into the state of KAPSCH’s product development thereby allowing competitors an unfair advantage that would otherwise be unavailable to KAPSCH. (7) KAPSCH is careful in protecting proprietary aspects of its equipment design and processes. The information for which confidential treatment is sought has been kept confidential from public disclosure by KAPSCH and has not been made available to third parties except pursuant to non-disclosure agreements. In conclusion therefore, KAPSCH requests that the information in the referenced exhibits be withheld from public disclosure until and unless KAPSCH notifies the Agency that such information may be publicly released. Our goal is simply to keep the information confidential as that is in the best interest of the public transportation agencies relying upon our technology. Confidential treatment of exhibits, such as these, allows KAPSCH to provide a full technical description of the equipment to the FCC, which disclosure is in the public interest. Refusal to treat such documents as confidential would result in submission of insufficient information on which the FCC could base its decision to grant authorizations and delay deployment of these new and improved devices for ITS applications. Page 3 Kapsch TrafficCom Kapsch TrafficCom Canada Inc. | 6020 Ambler Drive | Mississauga, ON L4W 2P1 | Canada | Phone 905 624 3020 | Fax 905 625 6197 | www.kapsch.ca Sincerely, Dated this 30 Day of April 2014 By Richard Turnock Title CTO Telephone +1 905-624-3020 X 7900 On Behalf Of Kapsch TrafficCom Canada Inc.

Kapsch TrafficCom © 2014 Kapsch TrafficCom Canada Inc., all rights reserved. Product Name: JANUS® MRFM-S Model Number: 802295-TAB Date: April 25, 2014 Subject: External Pictures JANUS MRFM-S Front Photo FCC/IC Label here Kapsch TrafficCom © 2014 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS MRFM-S Back Photo Kapsch TrafficCom © 2014 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS MRFM-S TX side photo Kapsch TrafficCom © 2014 Kapsch TrafficCom Canada Inc., all rights reserved. JANUS MRFM-S RX section

Product Name: JANUS® MRFM-S Model Number: 802295-TAB Date: April 29, 2014 Subject: Label Format The regulatory identification label (FCC ID and IC) is identical for all the models requested in this application. The label is shown below.

Kapsch TrafficCom © 2014 Kapsch TrafficCom Canada Inc., all rights reserved. Product Name: JANUS® MRFM-S Model Number: 802295-TAB Date: April 29, 2014 Subject: Label Location The regulatory identification label (FCC ID and IC) location for model 802295 Is shown below.

Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 1 of 2 Report issue date: 5/8/2014 GEMC File #: GEMC-FCC-22064R1 Receiver PCA Front Photo Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 2 of 2 Report issue date: 5/8/2014 GEMC File #: GEMC-FCC-22064R1 Transmitter PCA Front Photo

Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 1 of 2 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Maximum Permissible Exposure Purpose The purpose of this test is to ensure that the RF energy intentionally transmitted, in terms of power density emitted from the EUT at a stated operating distance does not exceed the limits listed below as defined in the applicable test standard, as calculated based upon readings obtained during testing. This helps protect human exposure to excessive RF fields. Limit(s) and Method The limits are defined in FCC 1.1310 Table 1 (B) limits for general public exposure was applied. The limit for the frequency range of 300 MHz to 1500 MHz was applied. This is a limit of 0.61 mW/ cm 2 . Results The distance used for calculations was 100 cm, as this is the minimum distance an operator will be from the EUT during normal operation. The antenna height state in the User Manual is 16 ft. Therefore, no operator will be less than 100 cm from the antenna. The EUT passed the requirements. The worst case calculated power density was 0.59 mW/cm 2 , this is under the 0.61 mW/cm 2 requirement. Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 2 of 2 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Calculations Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:33.74(dBm) Maximum peak output power at antenna input terminal:2365.919697(mW) Antenna gain(typical):15(dBi)*(12.85 dB + 2.15 = 15 dBi) Maximum antenna gain:31.6227766(numeric) Time Averaging:100(%) Prediction distance:100(cm) Prediction frequency:915.75(MHz) E limit for uncontrolled exposure at prediction frequency:0.6105(mW/cm^2) Power density at prediction frequency:0.595374(mW/cm^2) Margin of compliance:0.1(dB) This equates to5.953743714W/m^2PASS For informationThis equates to47.37680213V/m 2 4R PG S π =

LAB REGISTRATION #6844A-3 Testing Laboratory Certificate #2555.01 FCC REGISTRATION #377448 R-4023, G-506 T-1246, C-4498 Page 1 of 111 Report issue date: 5/2/2014 GEMC File #:GEMC-FCC-22064R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. This report is based on GEMC Template “FCC 15 247 Rev2.” Global EMC Inc. Labs EMC & RF Test Report As per FCC Part 90 Subpart M:2014 & RSS-137 Issue 2:2009 Location and Monitoring Service (LMS) Operation in the 902 – 928 MHz Band on the JANUS Multi-Protocol RF Module-Smart Min Xie Project Engineer Global EMC Labs Inc 11 Gordon Collins Dr, Gormley, ON, L0H 1G0 Canada Ph: (905) 883-8189 Testing produced for See Appendix A for full customer & EUT details . Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 2 of 111 Report issue date: 5/2/2014 GEMC File #: GEMC-FCC-22064R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Justifications, Descriptions, or Deviations......................................................................... 6 Applicable Standards, Specifications and Methods ........................................................... 7 Sample calculation(s) ......................................................................................................... 8 Document Revision Status ................................................................................................. 8 Definitions and Acronyms ..................................................................................................... 9 Testing Facility .................................................................................................................... 10 Calibrations and Accreditations ....................................................................................... 10 Testing Environmental Conditions and Dates ................................................................. 11 Detailed Test Results Section .............................................................................................. 12 Output Power and Antennal Heights ............................................................................... 13 Occupied Bandwidth ........................................................................................................ 33 Emission Mask ................................................................................................................. 55 Transmitter Spurious Radiated Emissions ....................................................................... 87 Temperature Frequency Stability ..................................................................................... 96 Appendix A – EUT Summary ............................................................................................ 101 Appendix B – EUT and Test Setup Photographs............................................................... 104 Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 3 of 111 Report issue date: 5/2/2014 GEMC File #: GEMC-FCC-22064R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Report Scope This report addresses the EMC verification testing and test results of Kapsch TrafficCom Canada Inc’s JANUS Multi-Protocol RF Module-Smart (MRFM-S), model 802295 herein referred to as EUT (Equipment Under Test) performed at Global EMC Labs. The EUT is a standard rack mount unit. The EUT was tested for compliance against the following standards: FCC Part 90 Subpart M:2014 RSS-137 Issue 2:2009 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. The results contained in this report relate only to the item(s) tested. This report does not imply product endorsement by A2LA or any other accreditation agency, any government, or Global EMC Inc. Opinions/interpretations expressed in this report, if any, are outside the scope of Global EMC Inc accreditation. Any opinions expressed do not necessarily reflect the opinions of Global EMC Inc, unless otherwise stated. Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 4 of 111 Report issue date: 5/2/2014 GEMC File #: GEMC-FCC-22064R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Summary The results contained in this report relate only to the item(s) tested. EUT FCC Certification #, FCC ID: JQU802295A EUT Industry Canada Certification #, IC: 2665A-802295A EUT Passed all tests performed. Yes (see test results summary) Tests conducted by Min Xie Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 5 of 111 Report issue date: 5/2/2014 GEMC File #: GEMC-FCC-22064R1 © Glo bal EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Test Results Summary Standard/Method Description Class/Limit Result FCC 90.205 RSS-137 Clause 6.4 Output Power 30 W Pass FCC 90.207 RSS-137 Clause 6.2 Types of Modulatio…

Text truncated - open the document above for the full version.

Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 1 of 6 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Illustration 1: 802356 Radiated emission setup – photo 1 Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 2 of 6 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Illustration 2: 802356 Radiated emission setup - photo 2 Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 3 of 6 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Illustration 3: 802356 Radiated setup - photo 3 Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 4 of 6 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Illustration 4: Antenna conducted emission setup Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 5 of 6 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Illustration 5: Antenna conducted emission – KTDM setup with circulator Client Kapsch TrafficCom Canada Inc Product JANUS Multi-Protocol RF Module-Smart Standard(s) RSS-137 Issue 2:2009 / FCC Part 90 Subpart M:2014 Page 6 of 6 Report issue date: 5/3/2014 GEMC File #: GEMC-FCC-22064R1 Illustration 6: Temperature stability setup - photo