
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
SKY-1001LCD INTRODUCTION SKYTECH’S remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. Its battery operation allows the system to operate independently of household current. The system operates on radio frequencies with nondirectional. The SYSTEM’s operating range is approximately 80 feet with 255 security codes programmed at the factory. OPERATING The transmitter operates on a 12V battery made specifically for remote controls and electronic lighters. Before using the transmitter, remote the insulation tab protecting one end of the battery in the battery compartment. The transmitter has ON and OFF functions that are activated by pressing either button on the face of the transmitter. When ON button on the transmitter is pressed, the security code of 303.875MHZ will send to the receiver. Meanwhile, transmitter’s LCD will display . Otherwise, the OFF is pressed then the LCD will show no . When ON/OFF are pressed at the same time, the temperature display will change the ºC or ºF option function. GENERAL INFORMATION BATTERY LIFE Life expectancy of alkaline batteries in the SKYTECH-1001LCD should be at least 12 months. When the transmitter no longer operates the receiver from a distance it did previously (i.e. the transmitter’s range has decreased), the batteries should be checked. 1. 3V battery for LCD display ( Fig.1) 2. 12V battery for transmitter frequency ( Fig.2) 3. The battery mark of LCD shows flash or unclear, please change 3V battery 4. The LCD shows no action while press the button. Please change the 12V battery. BATTERIES: Transmitter 12V (A23) BATTERIES OF LCD: 3V (2032) OPERATING FREQUENCY: 303.875 MHz ONE YEAR BATTERY LIFE Caution :changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
SKY-1001LCD INTRODUCTION SKYTECH’S remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. Its battery operation allows the system to operate independently of household current. The system operates on radio frequencies with nondirectional. The SYSTEM’s operating range is approximately 80 feet with 255 security codes programmed at the factory. OPERATING The transmitter operates on a 12V battery made specifically for remote controls and electronic lighters. Before using the transmitter, remote the insulation tab protecting one end of the battery in the battery compartment. The transmitter has ON and OFF functions that are activated by pressing either button on the face of the transmitter. When ON button on the transmitter is pressed, the security code of 303.875MHZ will send to the receiver. Meanwhile, transmitter’s LCD will display . Otherwise, the OFF is pressed then the LCD will show no . When ON/OFF are pressed at the same time, the temperature display will change the ºC or ºF option function.
FCC ID.K9L1001T Rev. No 1.0 FCC Part 15 Subpart C EMI TEST REPORT of E.U.T. : FIREPLACE TRANSMITTER FCC ID. : K9L1001T MODEL : SKY-1001LCD Working Frequency : 303.875 MHz for APPLICANT : Skytech II, Inc. ADDRESS: 9230 Conservation Way, Fort Wayne, Indiana U.S.A. 46809. Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 8 LANE 29, WENMIMG ROAD, LOSHAN TSUN, KWEISHAN HSIANG, TAOYUAN, TAIWAN, R.O.C. Tel:(03)3276170~3276174 Fax:(03)3276188 Report Number : ET90S-10-119 ETC Report No.:ET90S-10-119FCC ID.: K9L1001T Rev. No 1.0 TEST REPORT CERTIFICATION Applicant: Skytech II, Inc. 9230 Conservation Way, Fort Wayne, Indiana U.S.A. 46809. Manufacturer: SUPER STAR TECHNOLOGY CO., LTD. No. 7, LANE 306, SEC. 2, TAI-LIN RD., TAI-SHAN SHIANG, TAIPEI HSIEN, TAIWAN, R.O.C. Description of EUT : a) Type of EUT: Fireplace Transmitter ( LED Display included ) b) Trade Name: SKYTECH c) Model No.: SKY-1001LCD d) FCC ID: K9L1001T e) Working Frequency : 303.875 MHz f) Power Supply: DC 12V Battery x 1 (Main Power) and 3V Battery x 1 ( for LCD Display ) Regulation Applied: FCC Rules and Regulations Part 15 Subpart C (1999) I HEREBY CERTIFY THAT; The data shown in this report were made in accordance with the procedures given in ANSI C63.4 and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note:1.The results of the testing report relate only to the items tested. 2.The testing report shall not be reproduced except in full, without the written approval of ETC. 3.The report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Issue Date : Nov. 05, 2001 Test Engineer : Approve & Authorized Signer : Win-Po Tsai, Manager, NVLAP Signatory EMC Dept. of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No.:ET90S-10-119FCC ID.: K9L1001T Rev. No 1.0 Table of Contents Page 1. GENERAL INFORMATION ........................................................................................................................................ 1 1.1 P RODUCT D ESCRIPTIO N ................................................................................................................................................... 1 1.2 C HARACTERISTICS OF D EVICE : ........................................................................................................................................ 1 1.3 T EST M ETHODOLOGY ...................................................................................................................................................... 1 1.4 T EST F ACILITY ................................................................................................................................................................. 1 2. DEFINITION AND LIMITS.......................................................................................................................................... 2 2.1 D EFINITION ..................................................................................................................................................................... 2 2.2 R ESTRICTED B ANDS OF O PERATION ................................................................................................................................. 2 2.3 L IMITATION ..................................................................................................................................................................... 2 2.4 L ABELIN G R EQ UIREMEN T ................................................................................................................................................. 4 2.5 U SER I NFORMATION ........................................................................................................................................................ 4 3. RADIATED EMISSION MEASUREMENT................................................................................................................. 5 3.1 A PPLICABLE S TANDARD .................................................................................................................................................. 5 3.2 M EASUREMEN T P ROCEDURE ............................................................................................................................................ 5 3.3 T EST D ATA ...................................................................................................................................................................... 7 3.4 F IELD S TREN GTH C ALCULATIO N ...................................................................................................................................... 8 3.5 R ADIATED T EST E QUIPMENT ............................................................................................................................................ 8 3.6 M EASURIN G I N STRUMEN T S ETUP ..................................................................................................................................... 8 3.7 R ADIATED M EASUREMEN T P HOTOS ................................................................................................................................. 9 4. BANDWIDTH OF EMISSION AND DUTY FACTOR.............................................................................................. 10 4.1 A PPLICABLE S TANDARD P LO T G RAPHIC OF B ANDWIDTH AND DUTY FACTOR.......................................................... 10 4.2 T EST E QUIPMENT .......................................................................................................................................................... 10 4.3 A CTIVE T IME ................................................................................................................................................................ 10 4.4 P LO T G RAPHIC OF B ANDWIDTH AND DUTY FACTOR .............................................................................................…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 303.875 MHz - 303.875 MHz | - |

Remote control transmitter
Equipment Class
DSC - Part 15 Security/Remote Control TransmitterRemote Control Transmitter
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Wireless Remote Controller (TX)
Equipment Class
DSC - Part 15 Security/Remote Control TransmitterRemote Control
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Transmiter
Equipment Class
DTS - Digital Transmission System