L7KHVTP-01PCS Micro Base Station

Nokia Solutions and Networks

Click to zoom

Application Details

Equipment Class: PCB - PCS Licensed Transmitter
Date of Grant: Sep 14, 2000
Application Purpose: Original Equipment
Date of Application: Sep 14, 2000
Equipment Note: PCS Micro Base Station
Frequency Range: 1930.20000000 - 1989.80000000
Company: Nokia Solutions and Networks
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

DN9913471© Nokia Networks OyInternal Copy1 (38) Issue 1 en DRAFT 2Draft Nokia MetroSite GSM Base Station, Requirements for Installation and Operation Nokia MetroSite GSM Base Station, Requirements for Installation and Operation 2 (38)© Nokia Networks Oy Internal CopyDN9913471 Issue 1 en DRAFT 2Draft The information in this document is subject to change without notice and describes only the product defined in the introduction of this documentation. This document is intended for the use of Nokia Networks' customers only for the purposes of the agreement under which the document is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia Networks. The document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia Networks welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this document concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia Networks and the customer. However, Nokia Networks has made all reasonable efforts to ensure that the instructions contained in the document are adequate and free of material errors and omissions. Nokia Networks will, if necessary, explain issues which may not be covered by the document. Nokia Networks' liability for any errors in the document is limited to the documentary correction of errors. Nokia Networks WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENT OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this document or the information in it. This document and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Networks Oy 2000. All rights reserved. As stated in the Declaration of Conformity, this product complies with protection requirements of the Council Directive 89/336/EEC relating to electromagnetic compatibility, when installed using EMC-protected installation practices and practices stated in our User Manuals. DN9913471© Nokia Networks OyInternal Copy3 (38) Issue 1 en DRAFT 2Draft Contents Contents 3 1About this document 7 2Environment 9 2.1Storage9 2.1.1International standard for storage9 2.1.2Climatic conditions for storage9 2.1.3Mechanical conditions for storage10 2.2Transportation11 2.2.1International standard for transportation11 2.2.2Climatic conditions for transportation11 2.2.3 Mechanical conditions for transportation13 2.3Operation13 2.3.1 International standard for operation13 2.3.2 Climatic conditions for operation13 2.3.3Mechanical conditions for operation15 2.3.4Ingress protection15 2.3.5Acoustic noise15 2.3.6EMC shielding15 2.3.7Safety15 3Installation requirements 17 3.1Checking the site17 3.2Space requirements17 3.2.1Nokia MetroSite BTS dimensions and weight18 3.2.2Clearances around BTS18 3.3Mounting locations and positions20 3.4Requirements for wall and pole installation22 3.5Grounding22 3.6Mains power24 3.6.1Power consumption24 3.6.2Acoustic sound power26 3.6.3Connectors, cables and fuses for cable protection27 3.7Painting the BTS cover28 4Cabinet interfaces and cables 31 4.1Cable entry block32 5Installation equipment 35 Index 37 Nokia MetroSite GSM Base Station, Requirements for Installation and Operation 4 (38)© Nokia Networks Oy Internal CopyDN9913471 Issue 1 en DRAFT 2Draft DN9913471© Nokia Networks OyInternal Copy5 (38) Issue 1 en DRAFT 2Draft Summary of changes Version 1, 12 th November 1999. Pilot 3 (Version 1.2), 6th April 2000: •Added GSM to title and to body text •Added CE marking •Changed acoustic noise to 61dB in Chapters 2.3.5, 3.6.2 and Figure 5 •Increased cabinet length to 870mm in Figures 1 and 2. Nokia MetroSite GSM Base Station, Requirements for Installation and Operation 6 (38)© Nokia Networks Oy Internal CopyDN9913471 Issue 1 en DRAFT 2Draft About this document DN9913471© Nokia Networks Oy Internal Copy7 (38) Issue 1 en DRAFT 2Draft 1About this document This document introduces the requirements set by the Nokia MetroSite GSM Base Station (BTS) for successful installation and operation. Use this document as the source for the following information needed in the planning of installation: •Specification on the environmental conditions during transportation, storage and operation •Space requirements and other site-related installation matters •Site grounding and power supply to the BTS •Interface connections •Installation tools Read alsoNokia MetroSite GSM Base Station: Warnings and Cautions in conjunction with this document. Nokia MetroSite GSM Base Station, Requirements for Installation and Operation 8 (38)© Nokia Networks Oy Internal CopyDN9913471 Issue 1 en DRAFT 2Draft Environment DN9913471© Nokia Networks Oy Internal Copy9 (38) Issue 1 en DRAFT 2Draft Caution 2Environment This chapter defines the classes of environmental conditions and their severities to which the Nokia MetroSite GSM BTS can be exposed. The information is organised in the following parts: •Conditions for Storage •Conditions for Transportation •Conditions for Operation 2.1Storage This section defines the environmental conditions which the Nokia MetroSite GSM BTS can be exposed to during storage. The Nokia MetroSite GSM BTS must be stored in its original package before the installation. 2.1.1International standard for storage According to the ETS 300 019-1-1:1992, the class for Nokia MetroSite BTS is Class 1.2: weather-protected, partly temperature-controlled storage locations. 2.1.2Climatic conditions for sto…

Text truncated - open the document above for the full version.

Users Manual

Marianne Bosley From:Chris Harvey Sent:Friday, September 15, 2000 8:49 AM To:Marianne Bosley Subject:FW: Metrosite Edge Please PDF this e-mail and include it as a User's Manual attachment for TCB filing. EMC9734 -----Origina l Message----- From:[email protected] [SMTP:[email protected]] Sent:Friday, September 15, 2000 4:21 AM To:[email protected] Subject:Metrosite Edge Hi Chris After discussions with the project team, suppliers and installers - I can confir m that the following wording will be in the installation manual and the user manual "I M PO RTA NT NO TE: To comply with the FCC RF Exposure compliance requirements, the following indoor antenna installation and device operating configurations must be satisfied - Any indoor located antenna connected to this device must result in an ERP < 3.0W and must be mounted such that there is at least 20 centimeter spacing from the antenna structure and a human body." Please inform me if there are any more open issues, and thanks for your time and patients over this issue. Cheers Andy

Cover Letter(s)

attn:Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE:CONFIDENTIALITY REQUEST FOR THE NOKIA METROSITE EDGE To Whom It May Concern: This letter serves as an official request for confidentiality under FCC Rule Section 0.459. We have requested that the schematic diagrams required to be submitted with this application be withheld from public review. This is requested due to the fact that these documents contain information which has been developed by Nokia solely for use in the equipment specified. Please contact me if there is any information you may need. Yours Sincerely, Andrew Parry Nokia Networks UK Ltd Senior Design Engineer

Operational Description

DN991444© Nokia Networks OyInternal Copy1 (84) Issue 2 en DRAFT 1Draft Nokia MetroSite GSM Base Station, Product Description Nokia MetroSite GSM Base Station, Product Description 2 (84)© Nokia Networks Oy Internal CopyDN991444 Issue 2 en DRAFT 1Draft The information in this document is subject to change without notice and describes only the product defined in the introduction of this documentation. This document is intended for the use of Nokia Networks' customers only for the purposes of the agreement under which the document is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia Networks. The document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia Networks welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this document concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia Networks and the customer. However, Nokia Networks has made all reasonable efforts to ensure that the instructions contained in the document are adequate and free of material errors and omissions. Nokia Networks will, if necessary, explain issues which may not be covered by the document. Nokia Networks' liability for any errors in the document is limited to the documentary correction of errors. Nokia Networks WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENT OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this document or the information in it. This document and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Networks Oy 2000. All rights reserved. As stated in the Declaration of Conformity, this product complies with protection requirements of the Council Directive 89/336/EEC relating to electromagnetic compatibility, when installed using EMC-protected installation practices and practices stated in our User Manuals. DN991444© Nokia Networks OyInternal Copy3 (84) Issue 2 en DRAFT 1Draft Contents Contents 3 1About this document 7 2Introduction to the Nokia MetroSite GSM BTS 9 2.1Base Station System9 2.2Nokia MetroSite GSM BTS10 3Nokia MetroSite GSM BTS features 13 3.1Building capacity with Nokia MetroSite GSM BTS13 3.1.1Four TRX BTS with flexible sectoring and dual band operation13 3.1.2RF power and sensitivity optimised for microcellular applications14 3.1.3Smooth capacity expansion14 3.2High network quality14 3.2.1Receiver diversity14 3.2.2Frequency hopping15 3.2.3Antenna solution15 3.3Telecom features16 3.4Easy and fast deployment16 3.4.1Installation17 3.4.2Commissioning with the Nokia BTS Manager17 3.5Advanced operation and maintenance19 3.5.1Integration of TRX and Base Control Functions (BCF)19 3.5.2BTS diagnostics, alarms and TRX test19 3.5.3Battery backup with Nokia MetroSite BBU20 3.5.4Temperature control20 3.6Future features22 3.6.1Chaining of Nokia MetroSite GSM BTSs22 3.6.2General Packet Radio Service (GPRS)22 4Applications 23 4.1Building microcells with Nokia MetroSite BTS23 4.2Transmission of Nokia MetroSite BTS28 5Nokia MetroSite GSM BTS related software 31 5.1Nokia MetroSite GSM BTS software31 5.2 Nokia BTS Manager software32 5.3BTS software updates33 6General function, construction and units 35 6.1Nokia MetroSite GSM BTS general function35 6.1.1Signalling between network, BTS and MS35 6.1.2Nokia MetroSite GSM BTS internal function37 6.2Cabinet (VMCA)40 6.3Transceiver unit (VTGx, VTDA, VTPA)42 6.3.1Baseband module44 6.3.2RF module46 6.3.3External interfaces49 Nokia MetroSite GSM Base Station, Product Description 4 (84)© Nokia Networks Oy Internal CopyDN991444 Issue 2 en DRAFT 1Draft 6.4Interface unit (VIFA)49 6.4.1External interfaces50 6.5Transmission unit (VXEA, VXTx, VXRx)53 6.5.1Unit alternatives for radio link transmission53 6.5.2Unit alternatives for wireline transmission54 6.6Power supply unit (VSxx, HVxx)58 6.6.1Power supply unit alternatives58 6.6.2Output voltages58 6.6.3Connector types59 6.7Fan unit (VMFA, HVMF)60 7Unit alternatives and other delivery items 63 8Technical specifications 65 8.1Dimensions and weights of plug-in units70 8.1.1Transceiver unit70 8.1.2Interface unit70 8.1.3Transmission unit71 8.1.4Power supply unit71 8.2System requirements for Nokia BTS Manager71 8.3Basic telecom features72 8.4International recommendations73 8.4.1Common standards73 8.4.2Electrical standards73 8.4.3Environment76 8.4.4Mechanical standards77 8.4.5Base station interface equipment - related recommendations and standards78 Index 81 DN991444© Nokia Networks OyInternal Copy5 (84) Issue 2 en DRAFT 1Draft Summary of changes Version 1, 12 th November 1999. Pilot 3 (Version 1.3), 6th April 2000: •Added GSM to title and to body text •Changed max. power to 5W (Chapters 3.1.2 and 6.3) •Changed height of BTS (Figure 14, Table 8, and Table 9) •Changed BBU back-up time to 1hr (Chapter 3.5.3) •Added power alternatives (Table 6). Added HVMF fan to Chapter 6.7 •Expanded Chapter 7 to include 5W TRXs (new Table 7) •Added 5W TRX BTS power demand in Table 8 •Inluded 5W power (Tables 12, 13, and 14) Nokia MetroSite GSM Base Station, Product Description 6 (84)© Nokia Networks Oy Internal CopyDN991444 Issue 2 en DRAFT 1Draft About this document DN991444© Nokia Networks Oy Internal Copy7 (84) Issue 2 en DRAFT 1Draft Note 1About this document This document describes the hardware, software, and function of the Nokia MetroSite GSM Base Transceiver Station (BTS). Use this document as a …

Text truncated - open the document above for the full version.

Operational Description

Text truncated - open the document above for the full version.

Parts List/Tune Up Info

Parts List/Tune up procedure Not applicable for this equipment.

Test Report

September 15, 2000 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attention:Applications Examiner Applicant:Nokia Networks Stanhope Rd.; Camberley, Surrey, GU15 3BW Equipment: Metroside EDGE GSM 1900 FCC ID: L7KHVTP-01 Specification:for a 47 CFR 24 Licensed Certification Dear Examiner: The following application for Grant of Equipment Authorization is presented on behalf of Nokia Telecommunications, Inc. for the Licensed Certification of their Model: Metroside EDGE GSM 1900 Enclosed, please find a complete data and documentation package demonstrating that this device complies with the technical requirements of 47 CFR 24. If you have any questions, please contact the undersigned, who is authorized to act as Agent. Sincerely, Chris Harvey, Director EMC Laboratory MET Laboratories, Inc. EMI9734A- 2 -July 10, 2000 MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE !! BALTIMORE, MARYLAND 21230-3432 !! PHONE (410) 354-3300 !! FAX (410) 354-3313 ENGINEERING TEST REPORT in support of the Application for Grant of Equipment Authorization EQUIPMENT:PCS Base Transmitter Station (BTS), Model: Metroside EDGE GSM 1900 FCC ID:L7KHVTP-01 Specification:47 CFR 24 On Behalf of the Applicant:Nokia Networks. Stanhope Rd. Camberley, Surrey, GU15 3BW Manufacturer:Nokia Networks. Stanhope Rd. Camberley, Surrey, GU15 3BW Manufacturer’s Mr. Andrew Parry Representative Test Date(s):June12 thru June 19, 2000 ENGINEERING STATEMENT I ATTEST: the measurements shown in this report were made in accordance with the procedures indicated, and that the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements. On the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of Part 24 of the FCC Rules under normal use and maintenance. _____________________________ Liming Xu EMC Engineer, MET Laboratories FCC ID: L7KHVTP-01 EMI9734A- 3 -July 10, 2000 1.0INTRODUCTION The following data is presented on behalf of the Applicant, Nokia Networks, as verification of the compliance of the Nokia PCS Base Transmitter Station (BTS), Metroside EDGE GSM 1900 to the requirements of 47 CFR 24. 2.0TEST SITE All testing was conducted at MET Laboratories, Inc., 914 West Patapsco Avenue, Baltimore, Maryland 21230-3493. Radiated emissions measurements were performed on a three-meter open area test site (OATS). A complete site description is on file with the FCC Laboratory Division as 31040/SIT/MET. 3.0TEST EQUIPMENT USED ManufacturerEquipmentCalibration Due Date @ time of testing Cal. Interval Hewlett Packard8563A Spectrum Analyzer6/14/01annual EMCOBiconical Antenna 31044/10/01annual EMCOEMCO Log Periodic Antenna4/10/01annual EMCODouble Ridge Guided Horn2/17/01annual Hewlett Packard8594EM Analyzer11/20/00annual Hewlett Packard8591E Analyzer8/12/00annual SolarLISN8/27/00annual 4.0EQUIPMENT UNDER TEST CONFIGURATION The Base Transmitter Station (BTS) was configured with AC power supply modules and an external PC to program the EUT to output a PCS (i.e.GMSK Modulation type) cellular RF signal. The EUT with host external computer was configured for maximum signal gain and bandwidth. The EUT was operated in a manner representative of the typical usage of the equipment. During all testing, system components were manipulated within the confines of typical usage to maximize each emission. 5.0TEST TYPE(S) 5.1Radiated Emissions: 47 CFR2.1053, , 24.238(a) 5.2Occupied Bandwidth: 47 CFR2.1049 5.3RF Power Output: 47 CFR 2.1046, 24.232(a), (c) 5.4Spurious Emission at Antenna Terminals: 47 CFR 2.1051, 24.238(a) 5.5Spurious Emission at Antenna Terminals at Frequency Block edges +/- 1 MHz, 47 CFR 2.1051, 24.238(b) 5.6Frequency Stability over temperature variations: 47 CFR 2.1055(a)(1) 5.7Frequency Stability over variations in supply voltage: 47 CFR 2.1055(d)(1) 5.8AC Line Conducted Emissions: 47 CFR 15.107 5.9 Modulation Characteristics: 47 CFR 2.1047(a) FCC ID: L7KHVTP-01 EMI9734A- 4 -July 10, 2000 E(V/m) 1m ' 49.2X4.6 1 E(V/m) 1m '15.044V/mor143.43dbμV/m@1m 43%10Log(4.6)'49.63dB 143.43dBμV/m&49.63dB'93.80dBμV/m@1m E(V/m) 3m ' 49.2X4.6 3 E(V/m) 3m '5.01V/mor133dbμV 133&49.63'83.3dBμV/m@3m 6.0TEST RESULTS 6.1TEST TYPE: Radiated Emissions 6.1.1TECHNICAL SPECIFICATION:2.1053; 24.238(a) 6.1.2TEST DATE(S):6/12/00 6.1.3MEASUREMENT PROCEDURES: As required by §2.1053, field strength of spurious radiation measurements were made in accordance with the general procedures of ANSI C63.4-1992 "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz". Preliminary radiated emission measurements were performed inside a shielded chamber with all digital signal generators on and terminated. The frequency list from the preliminary measurements was used as a guide for making final measurements on a 10 meter open area test site. The unit was scanned over the frequency range of the lowest system oscillator value to 9 GHz. The Radiated Spurious Emissions Limit is obtained by the following: Based on an output power (as measured at the output of the Amplifier) of 4.6 watts: P o = 4.6 W As per 2.1053 (a), it is assumed this power is to be fed to a half-wave tuned dipole. Using a conversion formula for distance, the field strength at one meter can be derived: As per 24.238(a), the spurious emissions must be attenuated by 43 + 10log(P) which is: Therefore, the limit for spurious emissions is: At 3 meters measurement distance, the limit is; According to 24.238(a), all signals must be attenuated by 43.41 dB. Therefore, the limit for spurious emissions for a test distance of 3 meters is: FCC ID: L7KHVTP-01 EMI9734A- 5 -July 10, 2000 6.1.4RESULTS: Frequency (MHz) Azimuth (Degrees) PolarityHeight (m) Raw Amplitude (dBμV) Antenna Corr. Factor…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Steve Mitchell

[email protected]972-936-7500Fax: 972-936-7273

Technical Contact

MET Laboratories, Inc.Chris R Harvey

[email protected]410-354-3300

914 West Patapsco Ave. · Baltimore, Maryland · United States

Test Firm

MET Laboratories, Inc.John Mason

[email protected]410-354-3300Fax: 410-354-3313

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
1	24E	1.93 GHz - 1.99 GHz	5 W	338KGXW	1000.0000000000 Hz

Confidentiality

Long Term

Grant Notes

For outdoor installations: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of �1.1307(b)(3). For indoor installations: The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of �2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of �1.1307(b)(3).

L7KHVTP-01PCS Micro Base Station

Application Details

Documents & Files

Users Manual

Cover Letter(s)

External Photos

ID Label/Location Info

Internal Photos

Operational Description

Parts List/Tune Up Info

Test Report

Document Text