N5OD3DRC102.4 GHz Transceiver Model Number DRC-10 D3, DRC-10 2ST D3

211 266 44 Operating/assembly instructions DRC-10 D3 hand-held transmitters 719 IS 975 151014 enGB F1 F2 42658144.eps 2 211 266 44.indd/151014 © Terex MHPS GmbH Contents Manufacturer’s address: Original operating/assembly instructions Terex MHPS GmbH Forststrasse 16 40597 Düsseldorf, Germany www.demagcranes.com [email protected] 1 General 4 1.1 Information on DRC-10 hand-held transmitters 4 1.2 Information on the operating/assembly instructions 4 1.3 Symbols/signal words 5 1.4 Liability and warranty 6 1.5 Copyright 6 1.6 Spare parts 6 1.7 Definitions 7 1.8 After-sales service 8 1.9 Disposal of machine parts 8 2 Safety 9 2.1 General 9 2.2 Intended use 9 2.3 Responsibility of the owner 11 2.4 Operating personnel requirements 11 2.5 Personal protection equipment 12 2.6 Regular inspections 12 2.7 Safety instructions for installation and disassembly 12 2.8 Safety instructions when first putting the unit into service after completing installation 12 3 Device selection 13 3.1 DRC-10 scope of delivery 13 3.2 Available radio receivers 13 3.3 Accessories for DRC-10 hand-held transmitters 13 3.4 Accessories for crane identification 13 3.5 Casing seal/seal breakage 13 4 Technical data 14 4.1 Dimensions 14 4.2 International postal approval 15 5 Transport, packing, storage 16 5.1 Transport inspection 16 5.2 Packing 16 5.3 Storage 16 6 Design and function 17 6.1 Transmitter/receiver interface 17 6.2 Transmission method 17 6.3 Power supply for DRC-10 hand-held transmitters 18 6.4 Identification and display functions 21 PFCC and Industry Canada Information22 Further documents: DRC-MP operating instructions21127044 719IS975 DRC-DR operating instructions21126744 719IS975 3 4 211 266 44.indd/151014 © Terex MHPS GmbH 1 General You have purchased a Demag product. These operating/assembly instructions are designed to provide the owner and operators with appropriate instructions for safe and correct operation and for commissioning. Every individual given the task of transporting, installing, commissioning, operat- ing, maintaining and repairing our products and additional equipment must have read and understood • the operating/assembly instructions • the safety regulations and • the safety instructions in the individual chapters and sections. The operating/assembly instructions must be available to operating personnel at all times in order to prevent operating errors and to ensure smooth and trouble-free operation of our products. These operating/assembly instructions are an integral part of the DRC-10 hand- held transmitter. They must be kept available in the immediate vicinity at all times. DRC-10 hand-held transmitters may only be operated by personnel who are fully familiar with the operating/assembly instructions. If special designs or additional options are ordered or the latest technical modifications are incorporated, the actual scope of supply may differ from the data and information as well as from the illustrations described here. If you have any questions, please contact the manufacturer. 1.1 Information on DRC-10 hand-held transmitters 1.2 Information on the operating/assembly instructions 5 211 266 44.indd/151014 © Terex MHPS GmbH 1.3 Symbols/signal words NOTE Operating hazard for the DRC-10 hand-held transmitter. • This symbol indicates information on the appropriate use of DRC-10 hand- held transmitters. • Failure to follow these instructions may result in malfunctions, damage or pollution of the environment. DANGER. This symbol indicates an immediate hazard which can result in serious injury or death. WARNING. This symbol indicates a possibly hazardous situation which might result in serious injury or death. CAUTION. This symbol indicates a possibly hazardous situation which might result in medium to light injury. i Important safety information and instructions are marked by corresponding symbols and signal words in these operating/assembly instructions. Safety instructions and information must be followed. Follow these instructions with care to avoid any accidents, injuries or damage. Any locally applicable accident prevention regulations and general safety regulations must also be followed. The following symbols and instructions warn against possible injuries or damage and are intended to assist you in your work. 6 211 266 44.indd/151014 © Terex MHPS GmbH Wearing parts are not subject to liability for defects. We reserve the right to incorporate technical modifications within the scope of improving the operating characteristics and further development of the DRC-10 hand-held transmitters. These operating/assembly instructions must be treated confidentially. They are only intended to be used by people who work with or on DRC-10 hand-held transmitters. Any and all content, texts, drawings, images and any other information are protected within the sense of copyright law and are subject to further industrial rights. Any misuse is an offence. No part of this documentation, in whole or in part, may be reproduced, distributed, shown in public or used in any other way without specific prior consent. Infringements are an offence resulting in obligatory compensatory damages. Further rights reserved. All industrial rights reserved. Only genuine Terex MH spare parts may be used. The use of unauthorised spare parts renders null and void any claims for warranty, service, damages or liability against the manufacturer or his appointed personnel, dealers and representatives. CAUTION. Defective spare parts Incorrect or defective spare parts may cause damage, malfunctions or complete failure of DRC-10 hand-held transmitters. Only use genuine spare parts or parts approved by Terex MH. For safety-relevant wear parts, genuine Demag spare parts must always be used. Safety-relevant wear parts are, for example, brake linings, ropes, etc. 1.4 Liability and warranty All information included in these operating/assembly instructions has been compiled on the basis of the relevant regulations, state-of-the-art engineerin…

Text truncated - open the document above for the full version.

Page 1 of 1 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-13 A SCANRECO - DRC-10_10 2ST D3 Attestation Letter.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com DRC-10 D3 and DRC-10 2ST D3 Attestation Letter Product: 2,4 GHz Transceivers DRC-10 D3 and DRC-10 2ST D3 Company:Scanreco AB, Box 47144/ÅrstaSkolgränd 22, S-10074, Stockholm, Sweden Hereby declares that the devices DRC-10 D3 and DRC-10 2ST D3 are incapable of transmitting higher than the duty factor supported by the information provided in the equipment certification filing: maximum 88,78% duty cycle. November 13, 2014 Andrei Sazonov, PhD Senior RF Specialist Revision history Release Date: YYYY-MM-DD Edited By Changes A 2014-11-13 Andrei Sazonov First creation of document

Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com Attention: Application Examiner Re: Request for confidentiality Applicant: Scanreco AB FCC ID: N5OD3DRC10 Product Name: DRC-10 D3, DRC-10 2ST D3 To whom it may concern, Permanent Confidentiality Request is hereby submitted by Scanreco AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description • Parts list, Placement, BOM • Internal photos: All of our facilities have restricted access as well as camera/photo prohibition in order to prevent internal photos information from becoming public or disclosed to unauthorized persons. All personnel are under NDA. All of the circuit boards are covered with a thick layer of protective silicon/epoxy seal. The seal covers the entire board and prevents the public from accessing internal information. The products are non- serviceable due to the coating of the boards. All sales of the non-consumer radio remote control will be under a NDA which includes third party sales and the final users. A copy of the NDA is appended with this request. Internal photo illustrate the radio components shape and layout and give the possibility for competitors to recognize the radio platform and radio solution used. The layout of radio part is unique and is the proprietary intellectual property. Publishing of layout will disclose the design trade secrets and help to copy and theft the intellectual trade secrets with commercial and financial consequencies. Rationale for request for confidentiality: Scanreco AB has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Stockholm, Sweden, 04/13/2015 Sincerely, Andrei Sazonov, PhD Senior RF Specialist

External Photographs 277830-2 Scanreco DRC-10 D3 1 (1) Photograph 1. External, top side Photograph 2. External, bottom side

INTERNAL Page 1 of 1 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-04 A SCANRECO - DRC-10_10 2ST D3 Label Format and Location Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com DRC-10 D3 and DRC-10 2ST D3 Label Format and Location Revision history Release Date: YYYY-MM-DD Edited By Changes A 2014-10-15 Andrei Sazonov First creation of document

INTERNAL Page 1 of 6 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-12 A SCANRECO - DRC-10_10 2ST D3 RF Exposure Exemption Analysis.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com DRC-10 D3 and DRC-10 2ST D3 RF Exposure Exemption Analysis Products: 2,4 GHz Transceivers DRC-10 D3 and DRC-10 2ST D3 Company: Scanreco AB, Box 47144/Årsta Skolgränd 22, S-10074, Stockholm, Sweden The transceivers are designed for using as industrial hand-held / hand-operated remote control devices. The distance from the user to the antenna is at least 20 cm. Therefore the body SAR is not required. Extremity SAR exclusion is based on 40mm separation distance. When the device is stored on the operators belt it must be shut off. Pressing the buttons and operating the machine while the device is hanging from the belt or any other place it not allowed. It must be held in the hand. 20 cm INTERNAL Page 2 of 6 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-12 A SCANRECO - DRC-10_10 2ST D3 RF Exposure Exemption Analysis.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com Minimum test separation distance “d”: see 4.3.1 of 447498 “The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1).” The closest distance from the antenna to the users hand is 44,5mm (see picture below). The maximum duty cycle is 88,78%. The duty cycle is hardly coded in the firmware under production and cannot be changed by the user. From the pictures below the duty cycle is : Period: 6,4 s/83hits = 77,1ms Pulse length: 4,278ms Duty cycle: (4,278ms/77,1ms)*16channels = 88,78%. The closest distance from the antenna to the users hand is 44,5mm. INTERNAL Page 3 of 6 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-12 A SCANRECO - DRC-10_10 2ST D3 RF Exposure Exemption Analysis.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com INTERNAL Page 4 of 6 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-12 A SCANRECO - DRC-10_10 2ST D3 RF Exposure Exemption Analysis.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com INTERNAL Page 5 of 6 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-12 A SCANRECO - DRC-10_10 2ST D3 RF Exposure Exemption Analysis.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com FCC SAR Exclusion Analysis Section 4.3.1 of 447498 D01 General RF Exposure Guidance v05r02 Extremity SAR exclusion based on 40 mm separation distance and 88,78% maximum duty cycle for this hand-hand operated device is documented below. INTERNAL Page 6 of 6 Prepared by Product name/number Andrei Sazonov DRC-D10 D3, DRC-D10 2ST D3 Document responsible (approved by) Checked Date: YYYY-MM-DD Release File Name Kristofer Hylén JEH 2014-11-12 A SCANRECO - DRC-10_10 2ST D3 RF Exposure Exemption Analysis.docx Scanreco AB Årsta Skolgränd 22, Box 47144 SE-100 74, Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.com Industry Canada SAR Exclusion Analysis RSS-102 Issue 4 2.5.1 Exemption from Routine Evaluation Limits – SAR Evaluation SAR evaluation is required if the separation distance between the user and the radiating element of the device is less than or equal to 20 cm, except when the device operates as follows:  above 2.2 GHz and up to 3 GHz inclusively, and with output power (i.e. the higher of the conducted or radiated (e.i.r.p.) source-based, time-averaged output power) that is less than or equal to 20 mW for general public use and 100 mW for controlled use; The maximum radiated (e.i.r.p) source-based time averaged output power is 98,25mW. This is based on 88,78% duty cycle and 0 dBi max gain of internal antenna. RSS-102 exemption Notice_2013DRS0911 Extremity SAR Evaluation: SAR evaluation – exemption limits for routine evaluation based on frequency and separation distance at 2450 MHz, 40 mm, extremity = 173 x 2,5 = 432,5 mW. Revision history Release Date: YYYY-MM-DD Edited By Changes A 2014-11-12 Andrei Sazonov First creation of document

Reference number: 277830-2 Page 2 of 23 Table of Contents PRODUCT DESCRIPTION .................................................................................................................................. 3 Equipment Under Test (EUT) .......................................................................................................................... 3 Ratings and declarations ................................................................................................................................. 3 Power Supply .................................................................................................................................................. 3 GENERAL REMARKS .......................................................................................................................................... 4 Disclaimer ........................................................................................................................................................ 4 SUMMARY OF TESTING ..................................................................................................................................... 5 EUT Test Conditions during Testing ............................................................................................................... 5 TEST RESULTS ................................................................................................................................................... 6 Maximum Peak Conducted Output Power ...................................................................................................... 6 Transmitter Radiated Emissions 30 MHz to 26.5 GHz.................................................................................... 8 Test results with internal antenna .............................................................................................................. 9 Conducted Spurious Emissions 30 MHz to 26.5 GHz and Band Edge ......................................................... 11 20 dB Bandwidth of the Hopping Channel ...................................................................................................... 19 99% Occupied Power Bandwidth .................................................................................................................... 21 LIST OF TEST EQUIPMENT ............................................................................................................................... 23 Conducted Emissions ...................................................................................................................................... 23 Radiated Emissions ......................................................................................................................................... 23 Reference number: 277830-2 Page 3 of 23 Product Description PRODUCT DESCRIPTION Equipment Under Test (EUT) Wireless System-final product Type/ Model: DRC-10 D3 Serial Number: - DRC-10 D3 is an industrial hand-held 2.4 GHz transceiver that supports frequency hopping. Two samples were tested: one sample with a temporary antenna connector (SMA, conducted measurements) and one sample with an internal antenna (radiated measurements). Classification of the device Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT No modifications were applied to the EUT during testing Ratings and declarations Operating Frequency Range (OFR): 2405 – 2480 MHz Channels: 16 Channel separation: 5 MHz Conducted power: 19.94 dBm Transmission technique: FHSS Modulation: GFSK Integrated antenna gain: - External antenna gain: 0.0 dBi Power Supply 2 x 1.32 VDC Ni-MH batteries, new batteries were used when testing the EUT. Reference number: 277830-2 Page 4 of 23 General remarks GENERAL REMARKS Disclaimer This test report is issued under SGS Fimko general terms of delivery (available on request and accessible at www.fi.sgs.com). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues defined therein. Unless otherwise stated: (a) the results shown in this document refer only to the sample(s) tested and (b) such sample(s) are retained for three months. This document cannot be reproduced except in full, without prior approval of SGS Fimko. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. Reference number: 277830-2 Page 5 of 23 Summary of Testing SUMMARY OF TESTING Test Specification Description of Test Result §15.207(a) / RSS-GEN 8.8 Conducted Emissions on Power Supply Lines N/A §15.247(b)(1) / RSS-210 8.4 Maximum Peak Conducted Output Power PASS 15.247(a)(1) / RSS-210 A8.1 Hopping Channel Carrier Frequency Separation N/T 1) §15.247(a)(1)(iii) / RSS-210 A8.1 Number of Hopping Frequencies N/T 1) §15.247(a)(1)(iii) / RSS-210 A8.1 Average Time of Occupancy of Hopping Frequency N/T 1) §15.247(a)(1) / RSS-210 A8.1 20 dB Bandwidth PASS RSS-GEN 6.6 99 % Occupied Bandwidth PASS §15.247(d) / RSS-210 A8.5 100 kHz Bandwidth of Frequency Band Edges and Conducted Spurious Emissions PASS §15.209(a), §15.247(d) / RSS-210 A8.5 / RSS-GEN 8.10 Radiated Emissions Within The Restricted Bands PASS §15.209 / RSS-GEN 8.9 Unintentional Radiated Emissions PASS N/A: Battery operated EUT. N/T 1) : Not Tested, test data from the test report 277830-1B has been re-used for the EUT. The radio circuitry in both test reports is the same. EUT Test Conditions during Testing The EUT was configured into the wanted channel and was in continuous transmit mode during all the tests. Following channels were used during the tests: Channel Frequency/ MHz LOW 2405 MID 2440 HIGH 2480 Test Facility Testing Location / address: FCC registration number: 90598 SGS Fimko Ltd Särkiniementie 3 FI-00210, HELSINKI FINLAND Testing Location / address: FCC registration number: 178986 Industry Canada regi…

Text truncated - open the document above for the full version.

Reference number: 277830-1B Page 2 of 11 Table of Contents PRODUCT DESCRIPTION .................................................................................................................................. 3 Equipment Under Test (EUT) .......................................................................................................................... 3 Ratings and declarations ................................................................................................................................. 3 Power Supply .................................................................................................................................................. 3 GENERAL REMARKS .......................................................................................................................................... 4 Disclaimer ........................................................................................................................................................ 4 SUMMARY OF TESTING ..................................................................................................................................... 5 EUT Test Conditions during Testing ............................................................................................................... 5 TEST RELTS ........................................................................................................................................................ 6 Hopping Channel Carrier Frequencies Separation ......................................................................................... 6 Number of Hopping Channels ......................................................................................................................... 7 Average Time of Occupancy of Hopping Frequency ...................................................................................... 8 Duty cycle correction factor, Transmit time in 100 ms .................................................................................... 10 LIST OF TEST EQUIPMENT ............................................................................................................................... 11 Conducted Emissions ...................................................................................................................................... 11 Radiated Emissions ......................................................................................................................................... 11 Reference number: 277830-1B Page 3 of 11 Product Description PRODUCT DESCRIPTION Equipment Under Test (EUT) Wireless System-on-Module Type/ Model: DRC-DR D3 Serial Number: - DRC-DR D3 is a 2.4 GHz radio module that supports frequency hopping. The sample had an antenna connector and an external antenna. Conducted measurements were made with the sample having an external antenna. Measurements were made from the antenna connector (SMA). Classification of the device Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. Ratings and declarations Operating Frequency Range (OFR): 2405 – 2480 MHz Channels: 16 Channel separation: 5 MHz Conducted power: 19.84 dBm Transmission technique: FHSS Modulation: GFSK Integrated antenna gain: - External antenna gain: 4.0 dBi Power Supply The following wall charger was used during the tests (supplied with 115 V/ 60 Hz). Charger: Manufacturer: Friwo Mobile Power Gmbh Model: FW7600/05 Serial number: - Input voltage: 100-240 VAC Rated current: 0.09A max Rated frequency: 50-60 Hz Output voltage: 5 V DC Output current: 0.65A max Reference number: 277830-1B Page 4 of 11 General remarks GENERAL REMARKS Disclaimer This test report is issued under SGS Fimko general terms of delivery (available on request and accessible at www.fi.sgs.com). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues defined therein. Unless otherwise stated: (a) the results shown in this document refer only to the sample(s) tested and (b) such sample(s) are retained for three months. This document cannot be reproduced except in full, without prior approval of SGS Fimko. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. Reference number: 277830-1B Page 5 of 11 Summary of Testing SUMMARY OF TESTING Test Specification Description of Test Result 15.247(a)(1) / RSS-210 A8.1 Hopping Channel Carrier Frequency Separation PASS §15.247(a)(1)(iii) / RSS-210 A8.1 Number of Hopping Frequencies PASS §15.247(a)(1)(iii) / RSS-210 A8.1 Average Time of Occupancy of Hopping Frequency PASS EUT Test Conditions during Testing The EUT was configured into the wanted channel and was in continuous transmit mode during all the tests. Following channels were used during the tests: Channel Frequency/ MHz LOW 2405 MID 2440 HIGH 2480 Test Facility Testing Location / address: FCC registration number: 90598 SGS Fimko Ltd Särkiniementie 3 FI-00210, HELSINKI FINLAND Testing Location / address: FCC registration number: 178986 Industry Canada registration number: 8708A-2 SGS Fimko Ltd Karakaarenkuja 4 FI-02610, ESPOO FINLAND Reference number: 277830-1B Page 6 of 11 Hopping Channel Carrier Frequencies Separation TEST RELTS Hopping Channel Carrier Frequencies Separation Standard: ANSI C63.10 (2013) Tested by: PKA Date: 31.10.2014 Temperature: 22.7 C Humidity: 37 % RH FCC Rule: 15.247(a)(1) Frequency hopping systems with an output power less than 125mW shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or 2/3 of the 20 dB bandwidth of the hopping channel, whichever is greater. Test result Table 1. Hopping channel carrier frequencies separation test result. Data rate Measured separation Measured 20 dB BW Limit Result 1 Mbps 5.022 MHz 2…

Text truncated - open the document above for the full version.

Reference number: 278576-1 Page 2 of 10 Table of Contents PRODUCT DESCRIPTION ............................................................................................................................ 3 Equipment Under Test (EUT) .................................................................................................................... 3 Ratings and declarations ........................................................................................................................... 3 Power Supply ............................................................................................................................................ 3 GENERAL REMARKS ................................................................................................................................... 4 Disclaimer ................................................................................................................................................. 4 SUMMARY OF TESTING .............................................................................................................................. 5 EUT Test Conditions during Testing .......................................................................................................... 5 TEST RESULTS ............................................................................................................................................ 6 Conducted Emissions In The Frequency Range 150 kHz - 30 MHz. .......................................................... 6 Unintentional Radiated Emissions 30 MHz to 1000 MHz............................................................................ 8 LIST OF TEST EQUIPMENT ......................................................................................................................... 10 Conducted Emissions ............................................................................................................................... 10 Radiated Emissions .................................................................................................................................. 10 Reference number: 278576-1 Page 3 of 10 Product Description PRODUCT DESCRIPTION Equipment Under Test (EUT) Final Product Type/ Model: DRC-10 D3 Serial Number: - DRC-BM D3 is an industrial hand-held 2.4 GHz tranceiver. Transmitter was not operating during the tests. Only charging of batteries was operating. Classification of the device Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. Ratings and declarations Operating Frequency Range (OFR): 2405
2480 MHz Channels: 16 Channel separation: 5 MHz Conducted power: 19.94 dBm Transmission technique: FHSS Modulation: GFSK Integrated antenna gai…

Text truncated - open the document above for the full version.