OS3SNH01Sonic & Heat Sensor

Oplink Communications 1 / 5 User manual Sonic & Heat Sensor Model No: SNH1300 Version 0.1 May, 2013 Oplink Communications 2 / 5 Sonic & heat sensor is a device that is used to warn people of a possible fire. The alarm is designed to go off when detected smoke alarm sounds or when a certain temperature is met or when the temperature in a room rises at a certain rate. With its antomatic dialing alarm ,it can notify you though your communication equipment (for example, telephone, mobile phone) as soon as possible. Thereby let your losses to a minimum. Though they are not meant to replace smoke detectors, Sonic & heat sensors are a useful supplemental form of fire detection. It features dustproof, prevent false alarm, anti-electromagnetic, etc. This ensure quality and stability, widely used for home, office, store, hotel, warehouse and all indoor which needed prevent high temperature. Specification: System Detection Type Sound detection, ambient temperature detection Detection Sensitivity Sonic： 1. Sound intensity 85 db alarm threshold 2. Detection range of 30 CM limited direction Alarm Temperature: Oplink Communications 3 / 5 1. Over 57+/-3°C 2. Temperature changes by more than 6.7 ° C / minute Power Source DC3.0V 1400mAH Li-Battery Standby Mode Current ≤70μA Alarm Mode Current ≤40mA Power Consumption 1 year (Triggered twice a day and the noise less than 70 dB) RF transmission test By pushing the button on top surface Operating Environment WorkingTemp:-10~6°C5°C(sustain 2 hours at 60~6°C5°C) Humidity:5%~80%RH non-condensing Storage Temp: -20~65°C°C Humidity:5%~85%RH Battery Low Level Indicator 2.5V Low Battery Alarm Mode Low battery only alarms when another sensor alarm triggered and Heartbeat Safety Regulation FCC/CE/NCC Oplink Communications 4 / 5 Environmental Standard RoHS, REACH Communication RF Frequency 433.92MHz +/-150KHz Modulation ASK Antenna Internal Antenna Transmit Power >= -2dBm Output conductive TX power TBD (without Antenna) RF Range 40m indoor (Line of sight, LOS) 100m Outdoor(Line of sight, LOS) Mounting 1. Drive the wall-mounted cover with two screws which in the package in the wall which distance from smoke alarm is not more than 30cm. 2. Open the battery cover of Sonic & heat sensor, Insert a lithium battery CR 123 A positive polarity, indicator lamp flash means it has been add in the network. 3. Put the sensor on the wall-mounted cover and turn around. Oplink Communications 5 / 5 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Oplink Communications July 22,2013 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ZhuHai FTZ Oplink Communications,Inc. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product name: Sonic & Heat Sensor Model No.: SNH1300 FCC ID: OS3SNH01 We affirm that between SIEMIC and ZhuHai FTZ Oplink Communications,Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title : Li ZhiLi/Compliance Manager Contact address: #29,#30 Lianfeng Avenue,Free Trade Zone,Zhuhai City,Guangdong Province,China 5 19030 Contact telephone: +86-756-8819682

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] FCC Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Oplink Communications FCC Confidentiality Request Letter July 22,2013 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: OS3SNH01 We hereby request confidential treatment of information accompanying this application as outlined below: 1.Block Diagram 2.Schematics 3.Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Li ZhiLi/Compliance Manager Contact address: #29, #30 Lianfeng Avenue,Free Trade Zone,Zhuhai City,Guangdong Province,China 5 19030 Contact telephone: +86-756-8819682

External Photos

Internal Photos Antenna

Report No.: ATE20131449 Page 1 of 27 FCC ID: OS3SNH01 ACCURATE TECHNOLOGY CO., LTD APPLICATION CERTIFICATION On Behalf of ZhuHai FTZ Oplink Communications,Inc. Sonic & Heat Sensor Model No.: SNH1300 FCC ID: OS3SNH01 Prepared for : ZhuHai FTZ Oplink Communications,Inc. Address : #29, #30 Lianfeng Avenue,Free Trade Zone,Zhuhai City,Guangdong Province,China 519030 Prepared by : ACCURATE TECHNOLOGY CO., LTD Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20131449 Date of Test : July 04-12, 2013 Date of Report : July 12, 2013 Report No.: ATE20131449 Page 2 of 27 FCC ID: OS3SNH01 ACCURATE TECHNOLOGY CO., LTD TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................5 1.3. Measurement Uncertainty.........................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 6 3. SUMMARY OF TEST RESULTS................................................................................................... 7 4. THE FIELD STRENGTH OF RADIATION EMISSION ............................................................ 8 4.1. Block Diagram of Test Setup....................................................................................................................8 4.2. The Field Strength of Radiation Emission Measurement Limits..............................................................9 4.3. Configuration of EUT on Measurement ...................................................................................................9 4.4. Operating Condition of EUT ....................................................................................................................9 4.5. Test Procedure ........................................................................................................................................10 4.6. The Field Strength of Radiation Emission Measurement Results ..........................................................11 5. 20DB OCCUPIED BANDWIDTH ................................................................................................ 13 5.1. Block Diagram of Test Setup..................................................................................................................13 5.2. The Bandwidth of Emission Limit According To FCC Part 15 Section 15.231(c) ................................13 5.3. EUT Configuration on Measurement .....................................................................................................14 5.4. Operating Condition of EUT ..................................................................................................................14 5.5. Test Procedure ........................................................................................................................................14 5.6. Measurement Result ...............................................................................................................................15 6. RELEASE TIME MEASUREMENT............................................................................................ 16 6.1. Block Diagram of Test Setup..................................................................................................................16 6.2. Release Time Measurement According To FCC Part 15 Section 15.231(a) ..........................................16 6.3. EUT Configuration on Measurement .....................................................................................................17 6.4. Operating Condition of EUT ..................................................................................................................17 6.5. Test Procedure ........................................................................................................................................17 6.6. Measurement Result ...............................................................................................................................18 7. AVERAGE FACTOR MEASUREMENT .................................................................................... 19 7.1. Block Diagram of Test Setup..................................................................................................................19 7.2. Average factor Measurement according to ANSI 63.4: 2009.................................................................19 7.3. EUT Configuration on Measurement .....................................................................................................20 7.4. Operating Condition of EUT ..................................................................................................................20 7.5. Test Procedure ........................................................................................................................................20 7.6. Measurement Result ...............................................................................................................................21 8. ANTENNA REQUIREMENT........................................................................................................ 23 8.1. The Requirement ....................................................................................................................................23 8.2. Antenna Construction ...................................................................................................…

Text truncated - open the document above for the full version.