PMLDOMIP18Handheld TX

FCC and ISED Radiation Exposure Statement This equipment complies with FCC and Canadian radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme a RSS-102 limites énoncées pour un environnement non contrôlé. FCC and ISED Information to the user Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o- and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit di-erent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This Class B digital apparatus complies with the Canadian standard ICES-003. Cet appareil numérique de Classe B est conforme à la norme Canadienne ICES- 003. FCC and ISED Radiation Exposure Statement IS0970A00MM 28-03-2025 EN - Addendum to the manual FR - Addendum au manuel ES - Addendum al manual Nice SpA Headquarters Via Callalta 1 31046 Oderzo TV Italy www.niceforyou.com

Domì DOMIP1/U DOMIP1B/U DOMIP6/U DOMIP6B/U DOMIP18V/U DOMIP18VB/U Transmitters EN - Instructions and warnings for installation and use 2 – ENGLISH ENGLISH Translation of the original instructions in full CONTENTS GENERAL SAFETY WARNINGS AND PRECAUTIONS 1 1 GENERAL SAFETY WARNINGS AND PRECAUTIONS a CAUTION! – This manual contains important instructions and warnings for personal safety. Carefully read all parts of this manual. If in doubt, suspend installation immedi- ately and contact the Nice Technical Assistance. a CAUTION! – Important instructions: keep this manual in a safe place to enable future product maintenance and disposal procedures. –The product packing materials must be disposed of in compli- ance with local regulations. –Never apply modifications to any part of the device. Operations other than those specified may only cause malfunctions. The manufacturer declines all liability for damage caused by make - shift modifications to the product. –Never place the device near to sources of heat and never ex - pose to naked flames. These actions may damage the product and cause malfunctions. –This product is not intended for use by people (including chil - dren) with reduced physical, sensory or mental capabilities or who lack experience and knowledge, unless they have been giv - en supervision or instruction concerning the use of the product by a person responsible for their safety. –Make sure that children do not play with the product. –Handle the product with care, being sure not to crush, knock or drop it in order to avoid damage. –The batteries must be removed from the appliance prior to its disposal. –The batteries must be disposed of in a safe way. –Keep the new and used batteries out of reach of children. –Do not swallow the batteries. Risk of chemical burns. –If the battery compartment does not close tightly, stop using the product and keep it out of reach of children. –The manufacturer of this appliance, Nice S.p.A., hereby declares that the product complies with Directive 2014/53/EU. –The instruction manual and the full text of the EU Declaration of Conformity are available at the following Internet address: www.niceforyou.com, under the “support” and “download” sec - tions. –For transmitters: 433 MHz: ERP < 10 dBm. 1 GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . .2 2 PRODUCT DESCRIPTION AND INTENDED USE . . . . . . . . .3 2.1 List of constituent parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2.2 Using the buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 2.3 Transmitter functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 3 TRANSMITTER VERIFICATION. . . . . . . . . . . . . . . . . . . . . . . .4 4 MEMORISING THE TRANSMITTER. . . . . . . . . . . . . . . . . . . .4 4.1 Memorisation in “Mode 1” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 4.2 Memorisation through the “ENABLING Code” (between an OLD transmitter already memorised and a NEW transmitter) . . . . . . . . . . .5 4.3 Memorising a transmitter on OXIBD. . . . . . . . . . . . . . . . . . . . . . . . . .5 5 STATUS REQUEST PROCEDURE. . . . . . . . . . . . . . . . . . . . . .5 6 PROCEDURE FOR SELECTING A GROUP . . . . . . . . . . . . . .5 6.1 Transmitters DOMIP6/U and DOMIP6B/U . . . . . . . . . . . . . . . . . . . .5 6.2 Transmitter DOMIP18V/U and DOMIP18VB/U . . . . . . . . . . . . . . . .6 7 DELETION PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . .6 7.1 Delete all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 7.2 Deleting a group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 8 “SLIDER” SURFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 9 ENABLING/DISABLING THE ACOUSTIC SIGNAL. . . . . . . . .7 10 SIGNALS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 10.1 Signals on switch-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 10.2 Anomaly signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 10.3 BATTERY STATUS INDICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .8 11 REPLACING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . .8 12 PRODUCT DISPOSAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 12.1 Battery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 13 TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . .9 14 CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 14.1 SIMPLIFIED EU DECLARATION OF CONFORMITY . . . . . . . . . . . . . .9 14.2 COMPLIANCE WITH THE FCC RULES (PART 15) AND WITH RSS-210 RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 15 ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 ENGLISH – 3 PRODUCT DESCRIPTION AND INTENDED USE 2 2 PRODUCT DESCRIPTION AND INTENDED USE DOMI P/U series transmitters are designed for controlling automations for awnings, sun screens, shutters or mixed systems of Nice automations (scenes). a CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual is to be considered improper and is strictly forbidden! 2.1 LIST OF CONSTITUENT PARTS “Figure 1” shows the main parts making up DOMI P/U transmitters. The DOMI P family (Portable versions) consists of six models: DOMIP1/U and DOMIP1B/U with one button, DOMIP6/U and DOMIP6B/U with six buttons, and lastly ||nome_prodotto5| |and DOMIP18VB/U with display. DOMIP1/U DOMIP1B/U DOMI P/U (Rear view) DOMIP6/U DOMIP6B/U DOMIP18V/U DOMIP18VB/U PRGESC A B B D F G C C C H E P S 1 A Automation status LED B Command transmission buttons (up/opening “ w ”, stop “ z ” and down/closing “ v ”) C Automation status request button D Group selection bu…

Text truncated - open the document above for the full version.

Nice SpA Via Pezza Alta, 13 Z.I. Rustignè I-31046 Oderzo TV Italia Cap. Soc. € 11.600.000 i.v. Phone +39.0422.853838 Fax +39.0422.853585 P.IVA 03099360269 [email protected] www.niceforyou.com 120623-17 rev 9 Certification Application Attestation Statements Date: March 20, 2025 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) _____NICE S.p.A.______ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) _____NICE S.p.A.______ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☒ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . Nice SpA Via Pezza Alta, 13 Z.I. Rustignè I-31046 Oderzo TV Italia Cap. Soc. € 11.600.000 i.v. Phone +39.0422.853838 Fax +39.0422.853585 P.IVA 03099360269 [email protected] www.niceforyou.com 120623-17 rev 9 Thank you, By: ____ _____ Nicola Bottolo ______ (Signature 2 ) (Print name) Title: ___ Laboratory Manager ___ Company: ________ NICE S.p.A. ________ Telephone: ____ +39 0422 853838 _____ 2 - Letters must be placed on appropriate letterhead.

Nice SpA Via Pezza Alta, 13 Z.I. Rustignè I-31046 Oderzo TV Italia Cap. Soc. € 11.600.000 i.v. Phone +39.0422.853838 Fax +39.0422.853585 P.IVA 03099360269 [email protected] www.niceforyou.com 092723- 17 Rev 9 U.S. Agent Designation for Service of Process TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Nice North America LLC Contact Name: Josh Hansen Street Address: 5919 Sea Otter Place STE 100 City/Province/Zip: Carlsbad, CA 92010 Telephone No: +1 (949) 395-1166 Email: FRN #: [email protected] 0006674840 This letter is to confirm that we Nice North America LLC have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2024/07/12 Signed by: Josh Hansen – Regulatory Compliance Engineering Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. NICE S.p.A. Applicant Company name: Grantee Code: PML FRN #: 0010852580 Contact Name: Nicola Bottolo Street Address: Via Callalta, 1 City/Province/Zip: Oderzo (TV) 31046, Italy Telephone No: +39 0422 853838 Email: [email protected] Applicant Signature: Date: 2024/07/10 Signed by: Nicola Bottolo – Laboratory Manager, Nice S.p.A.

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 030624-32a Request for Confidentiality Date: May 8, 2025 Subject: Confidentiality Request for: _____FCC ID PMLDOMIP18 and IC ID 6140A-DOMIP18______ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term --------------------------- External Photos ☒ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term --------------------------- Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual ______Nice S.p.A.______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __45___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: 2025/05/02 . Sincerely, By: __/ Laboratory Manager ______Nicola Bottolo______________ (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Nice SpA Via Pezza Alta, 13 Z.I. Rustignè I-31046 Oderzo TV Italia Cap. Soc. € 11.600.000 i.v. Phone +39.0422.853838 Fax +39.0422.853585 P.IVA 03099360269 [email protected] www.niceforyou.com 050222-17 Authority to Act as Agent Date: July 23, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: ______IMQ S.p.A.______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: ____ 12 months _____ By: ____ _____ Nicola Bottolo _______ (Signature 1 ) (Print name) Title: ___ Laboratory Manager ___ On behalf of: _____ NICE S.p.A. _____ (Company Name) Telephone: ____ +39 0422 853838 _____ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID: PMLDOMIP18 IC ID: 6140A-DOMIP18 Nice – Model(s): DOMIP18V/U - DOMIP18B/U External Photos

FCC ID: PMLDOMIP18 IC ID: 6140A-DOMIP18 Nice – Model(s): DOMIP18V/U - DOMIP18B/U Internal Photos Printed loop antenna

B USINESS U NIT P RODOTTO – A PPARECCHIATURE RADIO EMF ASSESSMENT REPORT FCC Rules: Code of Federal Regulations (CFR) no. 47 RF Exposure Report Number. .............................. : AR23-0095960-03 Rev. 0 Date of issue ................................... : 2025-06-25 Total number of pages ................... : 10 Name of Testing Laboratory preparing the Report ...................... : IMQ S.p.A. Applicant’s name ............................ : NICE S.p.A. Address ........................................... : Via Callalta, 1 – IT-31046 Oderzo (TV) Test specification: 47 CFR Part 15 and 447498 D01 V06 Standards ....................................... : Test Report Form No. ..................... : TRF 3609/6 Test Report Form(s) Originator ..... : IMQ S.p.A. Master TRF ...................................... : Dated 2024-01-19 Test item description ..................... : LPD transmitter for controlling tubular motors Trademark or brand name ............. : NICE Manufacturer ................................... : NICE S.p.A. – Via Callalta, 1 – IT-31046 Oderzo (TV) Model/Type reference(s) ................ : DOMIP18V/U Ratings ............................................ : FCC ID .............................................. : 2x 1.5V-alkaline battery AAA PLMDOMIP18 General disclaimer: The results of tests and checks reported in this Test Report refer exclusively to the samples tested and described in the Report itself. This Report shall not be reproduced partially the written approval of IMQ S.p.A.. The authenticity of this Test Report and its contents can be verified by contacting IMQ S.p.A., responsible for this Test Report. Page 2 of 10 Report No. AR23-0095960-03 Mod. TRF 3609/6 B USINESS U NIT P RODOTTO – A PPARECCHIATURE RADIO Responsible Assessment Laboratory and testing location(s): Assessment Laboratory: IMQ S.p.A. Assessment location/ address .................... : Viale Lombardia, 20 – IT-20021 Bollate (MI) Assessed by (name, function, signature) .. : Alessandro MacrÏ [Laboratory technician] Approved by (name, function, signature) .. : Federico Sirtori [Laboratory manager] Page 3 of 10 Report No. AR23-0095960-03 Mod. TRF 3609/6 B USINESS U NIT P RODOTTO – A PPARECCHIATURE RADIO List of Attachments (including a total number of pages in each attachment): / Summary of testing Tests performed (name of test and test clause): Human exposure to electromagnetic fields Testing location: Viale Lombardia, 20 – IT-20021 Bollate (MI) Page 4 of 10 Report No. AR23-0095960-03 Mod. TRF 3609/6 B USINESS U NIT P RODOTTO – A PPARECCHIATURE RADIO Possible test case verdicts: - test case does not apply to the test item . : N/A (Not Applicable) - test item does meet the requirement ....... : P (Pass) - test item does not meet the requirement . : F (Fail) IMQ reference samples BEM 117806 (Item(s) sampled and sent by applicant) Date of receipt of test item .......................... : 2024-06-12 Date of acceptance of test item 2024-06-25 Date (s) of performance of tests ................. : 2024-07-12 General remarks: Throughout this report a comma / point is used as the decimal separator. Throughout this report, the term “Test item” is used over terms such as Test object, EUT or DUT. Name and address of factory (ies) .............. : / General product information (GPI) and other remarks: The ability or reliability of this product to perform its intended function in a particular application has not been investigated. The test results apply to the sample as received. All information relating to the details of the equipment under test at the ß 1 of this document was provided by the applicant. IMQ declines any responsibility derived from missing or wrong information provided aside by the applicant. Environmental reference conditions .......... : The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Temperature Humidity Atmospheric pressure 15 ∞C – 35 ∞C 30 % - 60 % 800 hPa – 1060 hPa If explicitly required in the basic standard or applied product standard the climatic values are recorded and documented separately in this test report. The laboratory is monitored by a continuous environmental conditions measurements system. Temperature, humidity and pressure data are recorded on a weekly basis and stored in local archive. Page 5 of 10 Report No. AR23-0095960-03 Mod. TRF 3609/6 B USINESS U NIT P RODOTTO – A PPARECCHIATURE RADIO Table of Contents: 1 General description of test item........................................................................................................ 6 1.1 Test item(s) ......................................................................................................................... 6 1.2 Port(s) .................................................................................................................................. 6 1.3 Power rating(s) .................................................................................................................... 6 1.4 Additional parameters ......................................................................................................... 7 1.5 Electromagnetically relevant components ........................................................................... 7 1.6 Documents as provided by the applicant ............................................................................ 7 2 Verdict summary section .................................................................................................................. 8 3 RESULTS OF RF EXPOSURE EVALUATION ................................................................................ 9 Page 6 of 10 Report No. AR23-0095960-03 Mod. TRF 3609/6 B USINESS U NIT P RODOTTO – A PPARECCHIATURE RADIO 1 General description of test item Note: The information in this section has been provided by the applicant. 1.1 Pho…

Text truncated - open the document above for the full version.

The results of tests and checks reported in this Test Report refer exclusively to the samples tested and described in the Report itself. This Report shall not be reproduced partially the written approval of IMQ S.p.A.. The authenticity of this Test Report and its contents can be verified by contacting IMQ S.p.A., responsible for this Test Report. TEST REPORT No. AR23-0095958-03 performed in accordance with FCC Rules: Code of Federal Regulations (CFR) no. 47 Part 15 Subpart C Section 15.231 PRODUCT LPD transmitter for controlling tubular motors MODEL(s) TESTED DOMIP18V/U FCC ID PLMDOMIP18 TRADE MARK(s) NICE APPLICANT NICE S.p.A. – Via Callalta, 1 – IT-31046 Oderzo (TV) Tested by Alessandro MacrÏ [Laboratory technician] Approved by Federico Sirtori [Laboratory manager] Revision Sheet Release No. Date Revision Description Rev. 0 2025-06-25 First edition Digital signed - AR23-0095958-03_TR_FCC Part C 15.231 - NICE- DOMIP18V/U Mod. TRF 3724/ 4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 2 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 1. GENERAL DATA SAMPLE Samples received on 2024-06-12 (Item(s) sampled and sent by applicant) IMQ reference samples BEM 117806 Samples tested No. 1 Object under analysis recognition Not carried out Date of acceptance of test item 2024-06-25 TEST LOCATION Testing dates 2024-06-25 ̃ 2024-07-04 Testing laboratory IMQ S.p.A. Testing site Viale Lombardia, 20 – IT-20021 Bollate (MI) CAB designation number IT0013 ENVIRONMENTAL CONDITIONING Parameter Measured Ambient Temperature 23.2  26.6 C Relative Humidity 48  54 % Atmospheric Pressure 954  1025 mbar The laboratory is monitored by a continuous environmental conditions measurements system. Temperature, humidity and pressure data are recorded on a weekly basis and stored in local archive. REMARKS Throughout this report a point is used as the decimal separator. The ability or reliability of this product to perform its intended function in a particular application has not been investigated. The test results apply to the sample as received. All information relating to the details of the equipment under test at the ß 3 of this document was provided by the applicant. IMQ declines any responsibility derived from missing or wrong information provided aside by the applicant. Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 3 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 2. REFERENCE DOCUMENT DOCUMENT DATE TITLE 47 CFR Part 15 2023 Radio Frequency Device ANSI C63.4 2014 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.10 2013 American National Standard for Testing Unlicensed Wireless Devices Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 4 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 3. EQUIPMENT UNDER TEST (EUT) DETAILS GENERAL DATA MODEL (basic) Description DOMIP18V/U LPD transmitter for controlling tubular motors. Eighteen channels, white color enclosure VARIANTS ß MODEL DERIVED Description DOMIP18B/U As DOMIP18V/U, black color enclosure FCC ID PMLDOMI Manufacturer NICE S.p.A. – Via Callalta, 1 – IT-31046 Oderzo (TV) Type of equipment LPD transmitter for controlling tubular motors Operating frequency: 433.92 MHz - Operation Command (TX and RX) 434.67 MHz - Wake up Command (Only TX) Maximum RF radiated power: 97.08 dBμV/m (PEAK at 3m distance, 433.92 MHz) Modulation: 2GFSK Channel Spacing: / Antenna: Integral RX sensitivity: / Channel bandwidth 160 kHz Number of channels 2 ß not object to ACCREDIA accreditation Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 5 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 4. TEST CONFIGURATION OF EQUIPMENT UNDER TEST EUT PORTS Port Description Max length Enclosure Plastic / AC power / / DC power 2x 1.5V-alkaline battery AAA / Signal / / Control / / Antenna Integral / STATE OF THE EUT DURING TESTS Ref. Mode Description #1 Operating Continuous modulated transmission (100% duty cycle) (Possibility of selecting the desired frequencies) Dedicated SW (FIRFPK100) for tests. #2 Operating Continuous reception #3 Operating Normal transmission EUT Antenna Port AC Power Port Earth Port Wired network Port Signal/Control Port DC Power Port Enclosure Port Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 6 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY SUPPORT EQUIPMENT Defined as equipment needed for correct operation or loading of the EUT, but not considered as tested: Equipment Manufacturer Model / / / ELECTROMAGNETICALLY RELEVANT COMPONENTS Component No. Manufacturer Model Microcontroller 1 STMicroelectronics STM32L071CB Radio module 1 Silicon labs 4461 PCB board 1 NICE CS748A RFI SUPPRESSION DEVICES Component No. Manufacturer Model / / / / EMI PROTECTION DEVICES Component No. Manufacturer Model / / / / EUT TECHNICAL DOCUMENTATION Document Reference / / Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 7 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 5. METHODS OF MEASUREMENT All compliance measurements have been carried out using the procedures described in the standard ANSI C63.4:2014, ANSI C63.10:2013 and Section 15.31 of CFR47 Part 15 – Subpart A (General). Additional test requirements have been adopted according to the reference Section indicated in the ß 6 of this test report. FREQUENCY RANGE INVESTIGATED Radiated emission tests: from 9 kHz to tenth harmonic of fundamental Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 8 of 29 Mod. TRF 3724/4 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 6. SUMMARY OF TEST RESULTS POSSIBLE TEST CASE VERDICTS: T…

Text truncated - open the document above for the full version.

Annex 1 of Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 1 of 4 B.U. P RODUCTS C ONFORMITY A SSESSMENT - EMC & R ADIO E QUIPMENT L ABORATORY TEST REPORT NO. AR23-0095958-03 ANNEX 1 PHOTOGRAPHIC DOCUMENTATION EUT IDENTIFICATION – External views B.U. P RODUCTS C ONFORMITY A SSESSMENT - EMC & R ADIO E QUIPMENT L ABORATORY Annex 1 of Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 2 of 4 B.U. P RODUCTS C ONFORMITY A SSESSMENT - EMC & R ADIO E QUIPMENT L ABORATORY TEST SET-UP – Axis orientation Annex 1 of Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 3 of 4 B.U. P RODUCTS C ONFORMITY A SSESSMENT - EMC & R ADIO E QUIPMENT L ABORATORY TEST SET-UP –Radiated tests 0.009 – 30 MHz Annex 1 of Test Report No. AR23-0095958-03 Date: 2025-06-25 Page 4 of 4 B.U. P RODUCTS C ONFORMITY A SSESSMENT - EMC & R ADIO E QUIPMENT L ABORATORY TEST SET-UP – Radiated tests 30-6000MHz – Worst case axis END OF DOCUMENT