PMLMYGOATransceiver Control

Nice MYGO MYGO/A MYGO4 MYGO4/A 1 2 3 4 5 6 7 8 MYGO8 MYGO8/A One-way transmitters EN - Instructions and warnings for installation and use 2 – ENGLISH ENGLISH Translation of the original instructions in full CONTENTS GENERAL SAFETY WARNINGS AND PRECAUTIONS 1 1 GENERAL SAFETY WARNINGS AND PRECAUTIONS a CAUTION! – This manual contains important instruc- tions and warnings for personal safety. Carefully read all parts of this manual. If in doubt, suspend installa- tion immediately and contact the Nice Technical As- sistance. a CAUTION! – Important instructions: keep this manual in a safe place to enable future product maintenance and disposal procedures. –The product packing materials must be disposed of in com- pliance with local regulations. –Never apply modifications to any part of the device. Oper - ations other than those specified may only cause malfunc- tions. The manufacturer declines all liability for damage caused by makeshift modifications to the product. –Never place the device near to sources of heat and never expose to naked flames. These actions may damage the product and cause malfunctions. –This product is not intended for use by people (including chil - dren) with reduced physical, sensory or mental capabilities or who lack experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety. –Make sure that children do not play with the product. –Handle the product with care, being sure not to crush, knock or drop it in order to avoid damage. –The batteries must be removed from the appliance prior to its disposal. –The batteries must be disposed of in a safe way. –The manufacturer of this appliance, Nice S.p.A., hereby de - clares that the product complies with Directive 2014/53/EU. –The instruction manual and the full text of the EU Declaration of Conformity are available at the following Internet address: www.niceforyou.com, under the “support” and “download” sections. –For transmitters: 433 MHz: ERP < 10 dBm. 1 GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . .2 2 PRODUCT DESCRIPTION AND INTENDED USE . . . . . . . . .3 2.1 List of constituent parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Transmitter functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 MEMORISING THE TRANSMITTER. . . . . . . . . . . . . . . . . . . .4 3.1 Transmitter verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.2 Memorising the transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.2.1 Memorisation in “Mode 1” . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.2.2 Memorisation in “Mode 2” . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.2.3 Memorisation in “Extended Mode 2” . . . . . . . . . . . . . . . . . . . 4 3.2.4 Memorisation through the “ENABLING Code” (between an OLD transmitter already memorised and a NEW transmitter) . 4 4 ENCODING SWITCH PROCEDURE . . . . . . . . . . . . . . . . . . . .5 5 REPLACING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . .6 6 PRODUCT DISPOSAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 6.1 Battery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 7 TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . .7 8 CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 8.1 SIMPLIFIED EU DECLARATION OF CONFORMITY . . . . . . . . . . 7 8.2 COMPLIANCE WITH THE FCC RULES (PART 15) AND WITH RSS-210 RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 9 ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 9.1 String for keyring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 9.2 FASTENING SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ENGLISH – 3 PRODUCT DESCRIPTION AND INTENDED USE 2 2 PRODUCT DESCRIPTION AND INTENDED USE Transmitters of the series MYGO (MYGO/A) are designed to control automations (gates, garage doors, road barriers and similar). a CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual is to be considered improper and is strictly forbidden! 2.1 LIST OF CONSTITUENT PARTS “Figure 1” shows the main parts making up MYGO (MYGO/A) transmitters. The range consists of two models: –MYGO4 (MYGO4/A) with four buttons –MYGO8 (MYGO8/A) with eight buttons. MYGO4 - MYGO4/A C A B A 5 1 2 3 4 6 7 8 MYGO8 - MYGO8/A E D A B A 1 A Red signalling LED B Hole for unlocking and removing the rear shell C Control buttons area for models MYGO4 (MYGO4/A) D Control buttons area first sector (*) for models MYGO8 (MYGO8/A) E Control buttons area second sector (*) for models MYGO8 (MYGO8/A) (*) Each sector can be regarded as if it were an independent transmitter. 2.2 TRANSMITTER FUNCTIONS MYGO (MYGO/A) Transmitters are factory-programmed for being used with receivers that adopt the “O-Code” one-way radio encoding system (“O-Code/A”). This encoding system allows for exploiting all the advanced and exclusive functions of the “NiceOpera” system. Moreover, for the markets that require them and prior suitable pro - gramming, the ET Blue, Peccinin, Linear encoding systems can be supported (refer to the paragraph “ENCODING SWITCH PROCE - DURE” on page 5). MYGO (MYGO/A) transmitters can be programmed with the ProView device (Figure 2). ProView MYGO - MYGO/A 2 4 – ENGLISH MEMORISING THE TRANSMITTER 3 3 MEMORISING THE TRANSMITTER 3.1 TRANSMITTER VERIFICATION Before memorising the transmitter in the automation’s receiver, en- sure that it is working correctly by pressing any button while observing whether LED (A) lights up. If LED (A) fails to light up, check the condition of the battery and re - place it if necessary (refer to the “REPLACING THE BATTERY” par- agraph on page 6). A 3 3.2 MEMORISING THE TRANSMITTER…

Text truncated - open the document above for the full version.

NICE SPA PAG. 1 di 1 Technical schemes

Nice SpA Via Callalta, 1 I-31046 Oderzo TV Italia Cap. Soc. € 11.600.000 i.v. Phone +39.0422.853838 Fax +39.0422.853585 P.IVA 03099360269 [email protected] www.niceforyou.com Authority to Act as Agent Date: _2022/02/10___________ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______IMQ S.p.A., Fulvio Giorgi______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: __12 months___ By: _____________ __Enrico Campion___________ (Signature 1 ) (Print name) Title: _Laboratory Manager_______ On behalf of: ___Nice S.p.A.__________ (Company Name) Telephone: _+39 0422 85383_________________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Nice SpA Via Pezza Alta, 13 Z.I. Rustignè I-31046 Oderzo TV Italia Cap. Soc. € 11.600.000 i.v. Phone +39.0422.853838 Fax +39.0422.853585 P.IVA 03099360269 [email protected] www.niceforyou.com Request for Confidentiality Date: 2022/02/10 Subject: Confidentiality Request for: __PMLMYGOA__________ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☐ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☐ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual ______Nice S.p.a.______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___180 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: _____ _Enrico Campion___ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

N N i i c c e e S S p p A A V V i i a a P P e e z z z z a a A A l l t t a a , , 1 1 3 3 Z Z . . I I . . R R u u s s t t i i g g n n è è I I - - 3 3 1 1 0 0 4 4 6 6 O O d d e e r r z z o o T T V V I I t t a a l l i i a a C C a a p p . . S S o o c c . . € € 1 1 1 1 . . 6 6 0 0 0 0 . . 0 0 0 0 0 0 i i . . v v . . P P h h o o n n e e + + 3 3 9 9 . . 0 0 4 4 2 2 2 2 . . 8 8 5 5 3 3 8 8 3 3 8 8 F F a a x x + + 3 3 9 9 . . 0 0 4 4 2 2 2 2 . . 8 8 5 5 3 3 5 5 8 8 5 5 P P . . I I V V A A 0 0 3 3 0 0 9 9 9 9 3 3 6 6 0 0 2 2 6 6 9 9 i i n n f f o o @ @ n n i i c c e e f f o o r r y y o o u u . . c c o o m m w w w w w w . . n n i i c c e e f f o o r r y y o o u u . . c c o o m m Description of variants of product Date: 2022-02-05 Subject: Description of variants of products (FCC ID: PMLMYGOA) I confirm that the two variants of remote control (FCC ID: PMLMYGOA) have identical internal circuitry. The schematic is same for all version of remote control. The version MYGO8/A has all buttons and version MYGO4/A has same schematic but without some buttons. Sincerely, By: ______ ____________________ _______Mr. Enrico Campion ____

FCC ID: PMLMYGOA IC ID: 6140A-MYGOA NICE – Models: MYGO4/A and MYGO8/A External Photos

FCC ID: PMLMYGOA IC ID: 6140A-MYGOA NICE – Models: MYGO8/A and MYGO4/A Internal Photos MYGO4/A MYGO8/A

NICE SPA PAG. 1 di 1 Overview The MYGO/A is a transmitter used to control automation of gates, garage doors and road barriers. MYGO/A is available in two versions: “MYGO4/A (4 command buttons) and MYGO8/A (8 command buttons). The transmitter operates on 433.92MHz using OOK modulation. It adopts a transmission technology called “O-code/A” and it’s powered with one CR2430 Lithium battery. Description of the product The circuit consists of: • The integrated circuit U1(LPC804) that generates the code, a train of 74 pulses. The code is “Rolling code” type so it changes each time the button is pressed. Encoder clock operation is guaranteed by an internal oscillator. • The Q3 transistor that works as Colpitts oscillator used to generate OOK modulation. It works with a 433.92 MHZ Saw resonator for frequency stabilization. The signal taken from the collector passes through a low pass filter and reaches the Loop type aerial (433 MHz band) engraved on the printed circuit. • The circuit also has a little induction circuit (L2, C7, Q1, Q2) that receive a proximity signal from another transmitter. • D1 led flashes during a transmission.

NICE SPA PAG. 1 di 2 Technical specifications Working temperature: from -5°C to +55°C Power: CR2430 Lithium battery “O-code/A” Radiated power (ERP):  0 dBm Center frequency: 433.92 MHz  100KHz Modulation: AM-OOK wide band Datarate: about 1Kbit/s The code word is made up of several parts. Each code word contains a Start Bit (0.66ms+0.66ms), 72bit of data and a Stop Bit (0.66ms) followed by a guard period (50.5ms) before another code word can begin. FRAME PERIOD: TF = 49.5 ms PAUSE: Tp = 50.5 ms START BIT: 0.66ms +0.66ms SINGLE BIT: TBIT = 0.66 ms IMPULSE TYPE “0”: TON = 0.22 ms, TOFF = 0.44 ms IMPULSE TYPE “1”: TON = 0.44 ms, TOFF = 0.22 ms STOP BIT: 0.66 ms NICE SPA PAG. 2 di 2 T_ON (worst case) = 0.66 +72*0.44+ 0.66 = 33ms DC = T_ON/ 100 ms = 0,33 20 LOG(DC) = - 9.62 Instructions Manual For details, please read the annex IS0807A00MM

The results of tests and checks reported in this Test Report refer exclusively to the samples tested and described in the Report itself. This Report shall not be reproduced partially the written approval of IMQ S.p.A.. The authenticity of this Test Report and its contents can be verified by contacting IMQ S.p.A., responsible for this Test Report. TEST REPORT No. AR22-0073532-01 performed in accordance with FCC Rules: Code of Federal Regulations (CFR) no. 47 Part 15 Subpart C Section 15.231 PRODUCT LPD transmitter MODEL(s) TESTED MYGO8/A FCC ID PMLMYGOA TRADE MARK(s) NICE APPLICANT NICE S.p.A.  Via Pezza alta, 13  I-31046 Rustignè di Oderzo (TV) Tested by Robertino Torri [Laboratory technician] Approved by Roberto Colombo [Laboratory manager] Revision Sheet Release No. Date Revision Description Rev. 0 2022-04-12 First edition Digital signed - AR22-0073532-01_TR_FCC Part C 15.231 - NICE - MYGO_A Mod. TRF 3724/ 2 B.U. P RODUCT S C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 2 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY  GENERAL DATA SAMPLE Samples received on 2022-01-31 (Item(s) sampled and sent by applicant) IMQ reference samples BEM 107283 Samples tested No. 1 Object under analysis recognition Not carried out Except where stated, characteristics of products were taken from client description and were not verified by the laboratory Date of acceptance of test item 2022-01-31 TEST LOCATION Testing dates 2022-01-31 ÷ 2022-02-25 Testing laboratory. IMQ S.p.A. - Via Quintiliano, 43 – I-20138 Milano Testing site Via Quintiliano, 43 – I-20138 Milano ENVIRONMENTAL CONDITIONING Parameter Measured Ambient Temperature 22.5 C Relative Humidity 47 % Atmospheric Pressure 965 mbar The laboratory is monitored by a continuous environmental conditions measurements system. Temperature, humidity and pressure data are recorded on a weekly basis and stored in local archive. REMARKS Throughout this report a point is used as the decimal separator. The ability or reliability of this product to perform its intended function in a particular application has not been investigated. IMQ declines any responsibility derived from missing or wrong information provided aside by the applicant. Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 3 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 2. REFERENCE DOCUMENT DOCUMENT DATE TITLE 47 CFR Part 15 2015 Radio Frequency Device ANSI C63.4 2014 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.10 2013 American National Standard for Testing Unlicensed Wireless Devices Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 4 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 3. EQUIPMENT UNDER TEST (EUT) DETAILS GENERAL DATA (According to manufacturer declaration) MODEL (basic) Description MYGO8/A LPD transmitter with 8 buttons MODEL (derivated) Description MYGO4/A LPD transmitter with 4 buttons FCC ID PMLMYGOA Manufacturer NICE S.p.A.  Via Pezza alta, 13  I-31046 Rustignè di Oderzo (TV) Type of equipment LPD transmitter Operating frequency 433.92 MHz Max radiated peak power 88.00 dBμV/m (at 3m distance) Modulation AM-OOK Channel Spacing / Channel bandwidth 200 kHz Antenna Integrated (strip line on PCB) Number of channels / Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 5 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 4. TEST CONFGURATION OF EQUIPMENT UNDER TEST EUT PORTS Port Description Max length Enclosure Plastic / AC power / / DC power 3 V DC by CR2430 type lithium battery / Signal/ Control / / Antenna Integrated (strip line on PCB) / STATE OF THE EUT DURING TESTS Ref. Transmission Mode Description #1 CW Continuous unmodulated transmission mode (constant tone) #2 Modulated Continuous modulated transmission (duty cycle close to 100%) #3 Normal operating Receiving mode / Normal transmission (button push) SUPPORT EQUIPMENT Defined as equipment needed for correct operation or loading of the EUT, but not considered as tested: Equipment Manufacturer Model / / / EUT Antenna Port AC Power Port Earth Port Telecommunication Port Signal/Control Port DC Power Port Enclosure Port Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 6 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY ELECTROMAGNETICALLY RELEVANT COMPONENTS Component No. Manufacturer Model PCB board 1 NICE 738-A RFI SUPPRESSION DEVICES Component No. Manufacturer Model / / / / EMI PROTECTION DEVICES Component No. Manufacturer Model / / / / EUT TECHNICAL DOCUMENTATION Document Reference / / Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 7 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 5. METHODS OF MEASUREMENT All compliance measurements have been carried out using the procedures described in the standard ANSI C63.4:2014, ANSI C63.10:2013 and Section 15.31 of CFR47 Part 15 – Subpart A (General). Additional test requirements have been adopted according to the reference Section indicated in the § 6 of this test report. FREQUENCY RANGE INVESTIGATED Radiated emission tests: from 30 MHz to tenth harmonic of fundamental. Test Report No. AR22-0073532-01 Date: 2022-04-12 Page 8 of 22 Mod. TRF 3724 / 2 B.U. P RODUCTS C ONFORMITY A SSESSMENT – EMC & R ADIO E QUIPMENT L ABORATORY 6. SUMMARY OF TEST RESULTS POSSIBLE TEST CASE VERDICTS: Test object meets the requirement PASS Test object does not meet the requirement FAIL Test case does not apply to the test object N.A. Test not performed N.P. CFR47 Part 15 TITLE RESULT § 15.203 Antenna Requirements PASS § 15.207 (a) Conducted Emission N.A. § 15.205 - 15.209 Radiated Emission PASS § 15.231 (b) F…

Text truncated - open the document above for the full version.

FCC ID: PMLMYGOA IC ID: 6140A-MYGOA NICE – Model: MYGO8/A Radiated Measurements Test Set-up