PVH090901Wireless Communication System Module

2007-06-01 Reference:cBProject-0704-08(1) connectBlue ab residence: malmö VAT no. se 556589-0851-01 norra vallgatan 64 3V se-211 22 malmö sweden tel.+46 (0)40-6307100 fax.+46 (0)40-237137 e-mail: [email protected] http://www.connectBlue.se page 1 of 1 Attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: CONFIDENTIALITY REQUEST FOR FCC ID PVH090901 Model name: OWLAN211g To Whom It May Concern: This letter serves as an official request for confidentiality under the FCC Rule Section 0.457 and 0.459 . . We have requested that the block diagram, schematic diagram and E&M datasheet required to be submitted with this application to be withheld from public review. The reason for this request is that these documents are company proprietary information that should never get into the possession of competitors, which would be harmful for our business. The E&M datasheet is a highly technical integration manual addressed to the module integrator and not to the end-user. Please contact me if there is any information you may need. Regards, Mats Andersson, CTO connectBlue

2007-07-04 Reference: cBProject-0704-09(2) connectBlue ab residence: malmö VAT no. se 556589-0851-01 norra vallgatan 64 3V se-211 22 malmö sweden tel.+46 (0)40-6307100 fax.+46 (0)40-237137 e-mail: [email protected] http://www.connectBlue.se page 1 of 1 Attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: PART 15 UNLICENSED MODULAR TRANSMITTER APPROVAL To Whom It May Concern: We, connectBlue AB, hereby requests a Limited Modular Approval of our OEM-WLAN module, described as follows: Brand name: connectBlue AB Model name: OWLAN211g FCC ID: PVH090901 In FCC Public Notice DA 00-1407 released June 26,2000 there are eight numbered requirements. Our OEM-WLAN module OWLAN211g complies with all these requirements. 1. The modular transmitter must have its own shielding. The WLAN-module OWLAN211g has its RF-parts covered by a shield box. 2. The modular transmitter must have buffered modulation/data inputs The WLAN-module OWLAN211g has no modulation inputs. The electrical interface consists of a SPI serial interface. 3. The modular transmitter must have its own power supply regulation The WLAN-module OWLAN211g contains its own voltage regulators. In case the supply voltage changes, the internal voltages will be kept unchanged. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c The WLAN-module OWLAN211gi is equipped with an internal antenna. The WLAN-module OWLAN211gx is equipped with U.FL antenna connectors that are considered unique. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration. 2007-07-04 Page 2 of 2 6. The modular transmitter must be labelled with its own FCC ID number The WLAN-module OWLAN211g will be marked with its own FCC ID number. The FCC ID number is printed in the solder mask of layer 8 on the module PCB. For systems using the module where the original FCC ID marking not will be visible when the module is installed instructions will be provided to the OEM customer how the end product must be label. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The WLAN-module OWLAN211g is compliant with all applicable FCC rules. Detail instructions are given in the product Users Guide. 8. The modular transmitter must comply with any applicable RF exposure requirements. The maximum output power is 115 mW [20.6 dBm]. The maximum antenna gain is 8.5 dBi [equal to a numeric gain of 7.1] The maximum permissible exposure defined in 47 CFR 1.1310 is 1 mW/cm². The maximum level at 20 cm distance is calculated using the general equation: S = P*G / 4πR² P = 115 mW, G = 7.1 (linear power gain relative to the isotropic radiator) R = 20 cm Solving for S, the power density at 20 cm is 0.16 mW/cm². This is well below the 1mW/cm² limit.

2007-07-04 Reference: cBProject-0704-09(2) connectBlue ab residence: malmö VAT no. se 556589-0851-01 norra vallgatan 64 3V se-211 22 malmö sweden tel.+46 (0)40-6307100 fax.+46 (0)40-237137 e-mail: [email protected] http://www.connectBlue.se page 1 of 1 Attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: PART 15 UNLICENSED MODULAR TRANSMITTER APPROVAL To Whom It May Concern: We, connectBlue AB, hereby requests a Limited Modular Approval of our OEM-WLAN module, described as follows: Brand name: connectBlue AB Model name: OWLAN211g FCC ID: PVH090901 In FCC Public Notice DA 00-1407 released June 26,2000 there are eight numbered requirements. Our OEM-WLAN module OWLAN211g complies with all these requirements. 1. The modular transmitter must have its own shielding. The WLAN-module OWLAN211g has its RF-parts covered by a shield box. 2. The modular transmitter must have buffered modulation/data inputs The WLAN-module OWLAN211g has no modulation inputs. The electrical interface consists of a SPI serial interface. 3. The modular transmitter must have its own power supply regulation The WLAN-module OWLAN211g contains its own voltage regulators. In case the supply voltage changes, the internal voltages will be kept unchanged. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c The WLAN-module OWLAN211gi is equipped with an internal antenna. The WLAN-module OWLAN211gx is equipped with U.FL antenna connectors that are considered unique. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration. 2007-07-04 Page 2 of 2 6. The modular transmitter must be labelled with its own FCC ID number The WLAN-module OWLAN211g will be marked with its own FCC ID number. The FCC ID number is printed in the solder mask of layer 8 on the module PCB. For systems using the module where the original FCC ID marking not will be visible when the module is installed instructions will be provided to the OEM customer how the end product must be label. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The WLAN-module OWLAN211g is compliant with all applicable FCC rules. Detail instructions are given in the product Users Guide. 8. The modular transmitter must comply with any applicable RF exposure requirements. The maximum output power is 115 mW [20.6 dBm]. The maximum antenna gain is 8.5 dBi [equal to a numeric gain of 7.1] The maximum permissible exposure defined in 47 CFR 1.1310 is 1 mW/cm². The maximum level at 20 cm distance is calculated using the general equation: S = P*G / 4πR² P = 115 mW, G = 7.1 (linear power gain relative to the isotropic radiator) R = 20 cm Solving for S, the power density at 20 cm is 0.16 mW/cm². This is well below the 1mW/cm² limit.

Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 1 of 7 70284_g.jpg cB-OWLAN211gx-02 (sample for external antenna), top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 2 of 7 70284_e.jpg cB-OWLAN211gi-02, top view (sample with internal antenna) Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 3 of 7 70284_k.jpg cB-OWLAN211gx-02 (sample with internal antenna), housing removed, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 4 of 7 70284_f.jpg cB-OWLAN211gx-02, bottom view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 5 of 7 70284_d.jpg cB-0903-03 cB-0903-03, carrier board, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 6 of 7 70290_h.jpg cB-0903-03, carrier board for cB-OWLAN211g-02 with external antenna, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 7 of 7 70284_b.jpg cB-0903-03, carrier board, bottom view with UARTR-SPI bridge

Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 1 of 7 70284_g.jpg cB-OWLAN211gx-02 (sample for external antenna), top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 2 of 7 70284_e.jpg cB-OWLAN211gi-02, top view (sample with internal antenna) Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 3 of 7 70284_k.jpg cB-OWLAN211gx-02 (sample with internal antenna), housing removed, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 4 of 7 70284_f.jpg cB-OWLAN211gx-02, bottom view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 5 of 7 70284_d.jpg cB-0903-03 cB-0903-03, carrier board, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 6 of 7 70290_h.jpg cB-0903-03, carrier board for cB-OWLAN211g-02 with external antenna, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 7 of 7 70284_b.jpg cB-0903-03, carrier board, bottom view with UARTR-SPI bridge

2007-06-01 Reference:cBProject-0704-07 (1) connectBlue ab residence: malmö VAT no. se 556589-0851-01 Norra vallgatan 64 3V se-211 22 malmö sweden tel.+46 (0)40-6307100 fax.+46 (0)40-237137 e-mail: [email protected] http://www.connectBlue.se page 1 of 1 FCC/IC identifier labels for WLAN unit cB-OWLAN211g The FCC/IC identifier marking is situated on the secondary side of the module. The marking is printed in the solder mask. Figure 1 OWLAN211g regulatory information Depending of module version one of the labels below will be attached to the topside of the module. There are four module versions. Serial label S/N:0104-01-###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gi-02 S/N:0106-01-###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gx-02 Internal antenna External antenna S/N:0105-01-###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gi-04 S/N:0107-01-###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gx-04 The label will be located as shown in Figure 2 – Figure 5 below. 2007-06-01 Page 2 of 2 OWLAN211gi-02, internal antenna, J1 pin header connector mounted Figure 2 OWLAN211gi-02 Serial label OWLAN211gi-04, internal antenna, J1pin header connector not mounted Figure 3 OWLAN211gi-04 Serial label S/N:0104 - 01 - ###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gi-02 S/N:0105 - 01 - ###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gi-04 2007-06-01 Page 3 of 3 OWLAN211gx-02, external antenna, J1 pin header connector mounted Figure 4 OWLAN211gx-02 Serial label OWLAN211gx-04, external antenna, J1 pin header connector not mounted Figure 5 OWLAN211gx-04 Serial label S/N:0106 - 01 - ###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gx-02 S/N:0107 - 01 - ###### Batch: ## FW: #.# Date: YY.WW cB-OWLAN211gx-04 2007-06-01 Page 4 of 4 An auxiliary label will be provided for systems using the module where the original label not will be visible when the module is installed. Instructions on how to attach the auxiliary label in compliance with the modular approval guidelines developed by the FCC will be provided. The instructions will call attention to place the auxiliary label on an exterior surface of the device such that it will be visible upon inspection. The auxiliary label will have at least the information as shown in the figure below This device contains FCC ID PVH090901 IC: 5325A-090901

Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 1 of 7 70284_g.jpg cB-OWLAN211gx-02 (sample for external antenna), top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 2 of 7 70284_e.jpg cB-OWLAN211gi-02, top view (sample with internal antenna) Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 3 of 7 70284_k.jpg cB-OWLAN211gx-02 (sample with internal antenna), housing removed, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 4 of 7 70284_f.jpg cB-OWLAN211gx-02, bottom view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 5 of 7 70284_d.jpg cB-0903-03 cB-0903-03, carrier board, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 6 of 7 70290_h.jpg cB-0903-03, carrier board for cB-OWLAN211g-02 with external antenna, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 7 of 7 70284_b.jpg cB-0903-03, carrier board, bottom view with UARTR-SPI bridge

Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 1 of 7 70284_g.jpg cB-OWLAN211gx-02 (sample for external antenna), top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 2 of 7 70284_e.jpg cB-OWLAN211gi-02, top view (sample with internal antenna) Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 3 of 7 70284_k.jpg cB-OWLAN211gx-02 (sample with internal antenna), housing removed, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 4 of 7 70284_f.jpg cB-OWLAN211gx-02, bottom view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 5 of 7 70284_d.jpg cB-0903-03 cB-0903-03, carrier board, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 6 of 7 70290_h.jpg cB-0903-03, carrier board for cB-OWLAN211g-02 with external antenna, top view Annex B of test report R70290_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 7 of 7 70284_b.jpg cB-0903-03, carrier board, bottom view with UARTR-SPI bridge

User Documentation Bluetooth TM , 802.11 b/g WLAN Embedded Antenna FR05-01-N-0-001 v1.0 Page 12 2003 FRACTUS D E B C Feeding Point PCB Antenna in mm B12.7 D20 C6.7 E38 2.22.32.42.52.62.7 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) No Matching Network Required Z X Y 00 3030 6060 9090 120120 150150 180180 -30 -25 -20 -15 -10 -5 0 00 3030 6060 9090 120120 150150 180180 -30 -25 -20 -15 -10 -5 000 3030 6060 9090 120120 150150 180180 -30 -25 -20 -15 -10 -5 0 00 3030 6060 9090 120120 150150 180180 -30 -25 -20 -15 -10 -5 0 Orientation Azimuth cut Elevation Cut = 0 Average Gain 0.9 dBi Gain Peak Gain 1.1 dBi Average Efficiency 68 % Efficiency Peak Efficiency 69 % Note: These values may also be obtained using configuration 6 with the antenna located in the right bottom side. In case you place the antenna both in the right top and bottom side or any other location, the performance may vary. Fractus can assist you in obtaining optimal antenna performance if the selected location, or the PCB dimensions are different from those described here. Our contact information is located on page 16.

IW-145 IW-613IW-614 2.4~2.4835GHz 50 Ohms nominal Omni 137mm151mm ≦2.0 5 dBi2 dBi 196mm 160mm IW-144 IW-151 TW-145 TW-613TW-614 4 dBi4 dBi3 dBi 2 dBi 4 / 5 / 4.5 dBi 2.4~2.4835GHz 2.4~2.4835GHz 2.4~2.4835GHz 2.4 / 5.2 / 5.8GHz 2.4/5.2/5.8GHz 157mm Wireless LAN Replacement Antenna H M W Model Frequency Impedance SWR Gain Radiation Height S 6 RP SMA Fixture Option: RP TNC

Specifications subject to change without notice. 3425 N.44 th Street, LINCOLN, NE 68504 USA SALES PHONE: 800.228.4563 PHONE: 402.467.4491 • FAX: 402.467.4528 www.centurion.com • [email protected] Copyright © 2005 Centurion Wireless Technologies, Inc. All Rights Reserved Specifications: ƒ Versatile and easy to use antenna for 2.4 to 2.5 GHz Bluetooth and IEEE 802.11 devices ƒ Designed for easy connection to radio cards ƒ Utilizes Centurion’s patented PCB Microsphere technology ƒ Has a ground plane incorporated into the resonator structure, therefore no additional ground plane is required to radiate efficiently ƒ Conformance to European RoHS Directive 2002/95/EC Frequency Range 2.4 – 2.5 GHz Gain 2 dBi Polarization Linear Impedance 50 ohms VSWR <2.5:1 Dimensions (L x W x H) 1.88" x .5"x .032" Weight 2 g Cable & Connector: Model # Part # Cable Connector NanoBlue-IP04 MAF94045 100mm, Ø 1.13mm IPEX MHF NanoBlue a – 12/23/05 NanoBlue Model Number: NanoBlue Internal Antenna – Embedded Azimuth Plane 2.45 GHz Elevation Plane Phi = 90 2.45 GHz Elevation Plane Phi = 0 2.45 GHz 1.88"

NB-2400 - Notebook-Antenne zum Nachrüsten. Eignet sich für viele Notebooks die für WLAN vorbereitet sind. Dazu ist meist ein mini-PCI Modul nötig, diese Module haben i.d.R. ein oder zwei U.FL Buchsen für den Anschluß der Antennen. Antenne passend für jedes 802.11b oder 802.11g System. Die Antennen werden im Normalfall im Displaydeckel eingebaut, neuere Geräte sind für den Einbau vorbereitet. Gewinn ca. 2dBi, annährend rundstrahlende Characteristik. Maße der Antenne selbst: 40 x 5 x 6mm. Im unterem Blechwinkel befinden sich drei Löcher für evtl. Befestigungen mit je 5mm Abstand, die Löcher haben den Durchmesser 1.25, 2 und 1.25mm. Antenna to retro-fit suitable notebook PCs. Many up- to-date notebooks are prepared for WiFi/wireless LAN. Usually this requires a mini-PCI module, which allows connection of two antennas with U.FL connector. Suitable for any 802.11B or 802.11g system. The antennas are usually installed in the display lid, many recent computers are prepared for such an installation. The cable is 60cm long, sufficient for most notebook sizes. Gain approx. 2dBi, nearly omni-directional radiation. The size of the antenna element itself is 40 x 5 x 6mm. On the lower side are three holes for mounting, distance each 5mm, diameter 1.25, 2 and 1.25mm. Technische Daten / technical data: Frequenzbereich / frequ. range: 2350-2500 MHz Gewinn/gain: 0 dBD = 2 dBi Anschluß/connector: Kabelanschluß, Länge und Stecker nach Kundenwunsch pigtail, length and connector custom design Standard: 60cm cable with U.FL plug Material: Stahlblech / steel Gewicht / weight: 2 Gramm (Antenne ohne Kabel) / 2 gr. (antenna only) Strahlungscharakteristik/pattern: Rundstrahler / omni Notebookantenna NB-2400 part no. 18540 WiMo Antennen und Elektronik GmbH Am Gäxwald 14, D-76863 Herxheim Tel. (07276) 96680 FAX 9668-11 http://www.wimo.com e-mail: [email protected]

Specifications subject to change without notice. 3425 N.44 th Street, LINCOLN, NE 68504 USA SALES PHONE: 800.228.4563 PHONE: 402.467.4491 • FAX: 402.467.4528 www.centurion.com • [email protected] Copyright  2004 Centurion Wireless Technologies, Inc. All Rights Reserved Specifications: ƒ ½ wave coaxial dipole ƒ Flexible element Frequency 2.4 - 2.5 GHz Polarization Vertical Gain 2.0 dBi Nominal Impedance 50 ohms VSWR 1.5:1 max at resonance RF Power Handling 50 watts Length 7.6 cm (90° Bent) or 10.8 cm (180° Straight) Temperature Range -40° to +80°C Drop Test 1M Cables & Connectors: Model # Part # Cable Connector WCR2400-IP04 MAF94017 100 mm RG-178 IPEX U.FL WCR Snap-in a – 5/20/04 WCR Model Number: WCR2400-IP WCR2400-FL External Antenna – Snap-in/Captive Azimuth 2.45 GHz Antenna Bent @ 90° Antenna Straight @ 180° Elevation phi=0 2.45 GHz 7.6 cm

Königswinkel 10 32825 Blomberg Germany Phone+49 5235 9500-0 Fax+49 5235 9500-10 TEST REPORT Test Report Reference:R70284_AEdition 1 Equipment under Test:802.11b/g Wireless LAN module cB-OWLAN211gi-02/ cB-OWLAN211gx-02 FCC ID: PVH090901 IC: 5325A-090901 Applicant: connectBlue AB Manufacturer:connectBlue AB Test Laboratory (CAB) accredited by DATech GmbH in compliance with DIN EN ISO/IEC 17025 under the Reg. No. DAT-P-105/99-21, FCC Test site registration number 90877 and Industry Canada Test site registration IC3469 TEST REPORT REFERENCE: R70284_A Edition 1 Examiner: Dieter SÜTTHOFFDate of issue: 12 July 2007Page2 of109 Contents:Page 1 IDENTIFICATION.....................................................................................................................................4 1.1 APPLICANT.....................................................................................................................................4 1.2 MANUFACTURER..........................................................................................................................4 1.3 DATES.............................................................................................................................................4 1.4 TEST LABORATORY......................................................................................................................5 1.5 RESERVATION...............................................................................................................................5 1.6 NORMATIVE REFERENCES..........................................................................................................5 1.7 TEST RESULTS..............................................................................................................................5 2 TECHNICAL DATA OF EQUIPMENT......................................................................................................6 2.1 DEVICE UNDER TEST...................................................................................................................6 2.2 PERIPHERY DEVICES...................................................................................................................8 3 OPERATIONAL STATES AND PHYSICAL BOUNDARIES.....................................................................8 4 APPLICATION OVERVIEW.....................................................................................................................9 5 TEST RESULTS.......................................................................................................................................10 5.1 CONDUCTED EMISSIONS ON POWER SUPPLY LINES (150 kHz to 30 MHz)...........................10 5.1.1 METHOD OF MEASUREMENT..........................................................................................10 5.1.2TEST RESULTS (CONDUCTED EMISSIONS ON POWER SUPPLY LINES) ..................11 5.2 6 dB BANDWIDTH..........................................................................................................................13 5.2.1METHOD OF MEASUREMENT (6 dBBANDWIDTH)........................................................13 5.2.2TEST RESULTS (6 dBBANDWIDTH)................................................................................14 5.3 MAXIMUM PEAK OUTPUT POWER..............................................................................................18 5.3.1 METHOD OF MEASUREMENT (MAXIMUM PEAK OUTPUT POWER)............................18 5.3.2 TEST RESULTS (MAXIMUM PEAK OUTPUT POWER)...................................................19 5.4 POWER SPECTRAL DENSITY......................................................................................................20 5.4.1 METHOD OF MEASUREMENT (POWER SPECTRAL DENSITY).................................... 20 5.4.2 TEST RESULTS (POWER SPECTRAL DENSITY)............................................................21 5.5 BAND-EDGE COMPLIANCE...........................................................................................................25 5.5.1 METHOD OF MEASUREMENT (BAND-EDGE COMPLIANCE)........................................25 5.5.2 TEST RESULT (BAND-EDGE COMPLIANCE (RADIATED)) b-mode...............................26 5.5.3 TEST RESULT (BAND-EDGE COMPLIANCE (RADIATED)) g-mode...............................28 CONTINUED NEXT PAGE TEST REPORT REFERENCE: R70284_A Edition 1 Examiner: Dieter SÜTTHOFFDate of issue: 12 July 2007Page3 of109 Contents (continued):Page 5.6 RADIATED EMISSIONS..................................................................................................................30 5.6.1 METHOD OF MEASUREMENT (RADIATED EMISSIONS)...............................................30 5.6.2TEST RESULTS (TRANSMITTER RADIATED EMISSIONS)............................................36 5.6.2.1 PRELIMINARY MEASUREMENT INTERNAL ANTENNA (30 kHz to 1 GHz).......36 5.6.2.2FINALMEASUREMENT INTERNAL ANTENNA (9 kHz to 30 MHz).....................40 5.6.2.3 FINAL MEASUREMENT INTERNAL ANTENNA (30 MHz to 1 GHz)....................41 5.6.2.4 PRELIMINARY MEASUREMENT INTERNAL ANTENNA (1 GHz to 25 GHz) b-mode................................................................................................45 5.6.2.5 FINAL MEASUREMENT INTERNAL ANTENNA (1 GHz to 25 GHz) b mode.......52 5.6.2.6 PRELIMINARY MEASUREMENT INTERNAL ANTENNA (1 GHz to 25 GHz) g-mode................................................................................................55 5.6.2.7 FINAL MEASUREMENT INTERNAL ANTENNA (1GHz to 25 GHz) g- mode......62 5.6.2.8 PRELIMINARY MEASUREMENT EXTERNAL PATCH ANTENNA (1 GHz to 25 GHz) b-mode................................................................................................65 5.6.2.9 FINAL MEASUREMENT EXTERNAL PATCH ANTENNA (1 GHz to 25 GHz) b-mode................................................................................................72 5.6.2.10 PRELIMINARY MEASUREMENT EXTERNAL PATCH ANTENNA (1 GHz to 25 GHz) g-mode............................…

Text truncated - open the document above for the full version.

Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 1 of 9 70284_25.jpg cB-OWLAN211gx-02 with external monopole antenna, test set-up fully anechoic chamber Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 2 of 9 70284_24.jpg cB-OWLAN211gx-02 with external monopole antenna, test set-up fully anechoic chamber Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 3 of 9 70284_26.jpg cB-OWLAN211gx-02 with external patch antenna, test set-up fully anechoic chamber Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 4 of 9 70284_32.jpg cB-OWLAN211gx-02 with external patch antenna, test set-up fully anechoic chamber Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 5 of 9 70284_28.jpg cB-OWLAN211gi-02 with internal antenna, test set-up fully anechoic chamber Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 6 of 9 70284_31.jpg cB-OWLAN211gi-02 with internal antenna, test set-up fully anechoic chamber Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 7 of 9 70284_2.jpg cB-OWLAN211gi-02 with internal antenna, test set-up outdoor test site Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 8 of 9 70284_27.jpg cB-OWLAN211gi-02 with internal antenna, test set-up open area test site Annex A of test report R70284_A Edition 1 EUT: cB-OWLAN211gi-02 / cB-OWLAN211gx-02 Manufacturer: connectBlue AB Examiner: Dieter SÜTTHOFF Date of issue: 12 July 2007 page 9 of 9 70284_3…

Text truncated - open the document above for the full version.