Q2VRFPCMWD05Wireless Controller for Gamecube and Wii

® 26-1557 User’s Guide Please read this user’s guide before using your new Controller. Wireless Controller for GameCube ™ and Wii ™ 234567 2 Connect receiver and controller GameCube ™ and Wii ™ 1. Insert the receiver’s GameCube plug into the socket on the Gamecube or Wii console. 2. Turn on the controller. The controller’s RX LED flashes and the receiver’s RX LED lights up steadily. Wii classic 1. Insert the receiver’s Nunchuk plug into the external extension connector of the remote. 2. Turn on the controller. The controller’s RX LED flashes and the receiver’s RX LED lights up steadily. Manual connection If the controller does not automatically connect to the receiver, follow these steps to connect manually. 1. Press CONNECT on the receiver. The RX LED flashes quickly. 2. Press the START and LZ buttons on the controller at the same time until the RX LED lights up steadily. Package contents • Controller• Receiver • User’s Guide • QuickStart Features • Ergonomic design fits comfortably in you hands • Enables you to move freely up to 30 feet (9.14m) away while playing 1 Install batteries 1. Open the battery compartment covers. 2. Install 1 AAA battery to each compartment, matching the polarity symbols (+ and –) marked inside. 3. Replace the battery covers. Battery Notes: • Dispose of batteries promptly and properly. Do not burn or bury them. • Use only fresh batteries of the required size and type. • Do not mix old and new batteries, different types of batteries (alkaline, or rechargeable), or rechargeable batteries of different capacities. • If you do not plan to use the controller for more than one w eek, remove the batteries. Batteries can leak chemicals that can damage electronic parts. Specifications Power Source .........................................2AAA Batteries (not included) Control distance ......................................................Up to 30 ft (9.14 m) Frequency ...................................................................................2.4 GHz are subject to change and improvement without notice. Actual product may vary from the images found in this document. FCC Information This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tio n. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful int erf erence to radio communications. However, th ere is no guarantee t hat interfer - ence will not occur in a particular installation. If th is equipment does cause harmful int erf erence to radio or television reception, which can be determined by t urning the equipment o ff and on, the user is encouraged to try to correct the interference by one or more of the follo wing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dif ferent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not e xpressly app roved by I gnition L.P. may cause int erf erence and void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful in terf erence, and (2) this device must accept any in terference received, including in terference that may cause undesired operatio n Limited Warranty Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, a ccident, Acts of God (such as floods or lightning), o r excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batterie s; (d) ordinary wear and t ear or cosmetic damage; (e) t ransportation, shipping or insurance costs; (f) costs of product removal, installation, set-u p service, adjust- ment or reinstallation; a nd (g) claims by persons other than the original p urchaser. Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of p urchase date to the pl ace of purchase. Ig nition L.P. will, at its option, unless otherwise provided by l aw: ( a) repair the product without charge for parts and labor; (b) r eplace t he product with th e same or a comparable product; or (c) refund th e purchase price. All replaced parts and products, and products on which a refund is made, become the property of Igni tion L.P. New or reconditioned parts and products may be used in the performance of warranty service. Repair ed or replaced parts and products are warranted for the remainder of the orig inal warranty period. You will be charged for repair or replacement of t he product made after the expiration of the warranty period. IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNE SS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF …

Text truncated - open the document above for the full version.

MAXWISE Production Enterprise Limited Dec./07/2009 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mils Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: Q2VRFPCMWD05 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR47, the applicant requests permanent confidential treatment of the following information accompanying this application: Block Diagrams Schematics Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors.

MAXWISE Production Enterprise Limited Room 1501, 15/F., AT Tower,180 Electric Road, North Point Hong Kong China Request for Supersede TO: Federal Communication Commission Please kindly be notified that we MAXWISE Production Enterprise Limited herein request to supercede the FCC ID: Q2VRFPCMWD05 for the following reason: We provided a wrong product description and we want to change the product name to the correct one on the certification. Please kindly permit the supercede. Thank you.

MAXWISE Production Enterprise Limited Date: 2009.12.15 SGS-CTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section Science & Technology Park, Shenzhen, China Subject: Series model discrepancy statement Dear Sir, Please be informed that, we would like to declare that the product NAME: Wireless Controller for Gamecube and Wii MODEL: 26-1557, MWGCWII-01, MWGCWII-02 identical to the original one with model in PCB layout, main board, circuit diagram and construction. The only difference is model name. Thank you.

1 Photographs - EUT Constructional Details

27.8x18.5mm(1:1) Silver Background black Words WIRELESS Controller Datecode sticker 12A09 8x4mm CAT. NO.: 26-1557 WIRELESS CONTROLLER FOR GAMECUBE AND WII FCC ID: Q2VRFPCMWD05 POWER: 2X”AAA” BATTERIES THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CUSTOM MANUFACTURED IN CHINA FOR IGNITION L.P., 3102 MAPLE AVE. SUITE 450, DALLAS, TX 75201 CAT. NO.: 26-1557 WIRELESS CONTROLLER FOR GAMECUBE AND WII FCC ID: Q2VRFPCMWD05 POWER: 2X”AAA” BATTERIES THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CUSTOM MANUFACTURED IN CHINA FOR IGNITION L.P., 3102 MAPLE AVE. SUITE 450, DALLAS, TX 75201

“This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the …

Text truncated - open the document above for the full version.

Authorized Signature: Robinson Lo Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification and jurisdictional issues defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This Test Report cannot be reproduced, except in full, without prior written permission of the Company. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEMO09120670503 Page: 1 of 20 FCC REPORT Application No. : SZEMO091206705RF Applicant: MAXWISE PRODUCTION ENTERPRISE LTD. Product Name: Wireless Controller for Gamecube and Wii Operation Frequency: 2402MHz to 2480MHz FCC ID: Q2VRFPCMWD05 Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249: 2008 Date of Receipt 01 December 2009 Date of Test 01 to 08 December 2009 Date of Issue 15 December 2009 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. This report supersedes our previous report SZEMO09120670501, issued on 09 December 2009, which is hereby deemed null and void.’’ . SGS-CSTC Standards Technical Services Ltd. Report No.: SZEMO09120670503 Page: 2 of 20 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 CONTENTS.............................................................................................................................................................. 2 3 TEST SUMMARY.................................................................................................................................................... 3 4 GENERAL INFORMATION.................................................................................................................................... 4 4.1 CLIENT INFORMATION............................................................................................................................................. 4 4.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................... 4 4.3 E.U.T ENVIRONMENT AND TEST MODES................................................................................................................. 6 4.4 TEST FACILITY...........................................................................................................…

Text truncated - open the document above for the full version.

1 Photographs - Test Setup Photos Radiated Emission