QABTSR105V910emerald

TSR-UL-0020-1 emerald™ Quick Start Installation Guide Notice The information in this manual was correct at the time of publication. Tyco Security Products reserves the right to modify this product. All specifications are subject to change without notice. © Copyright 2014 Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of Tyco Security Products. All Rights Reserved. Trademarks The trademarks, logos, and service marks displayed on this document are registered in the United States (or other countries). Any misuse of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. All trademarks not owned by Tyco Security Products are the property of their respective owners, and are used with permission or allowed under applicable laws. Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region. Contact your sales representative for more information. Licence information Your use of this product is governed by certain terms and conditions. Support If you require technical assistance using CEM products, please contact the CEM Support team using the following telephone number: Telephone:+44(0)2890 456656 Email: [email protected] • Please provide our support engineers with as much information as possible. This may include: • Site name • Product name and model • CEM software version • Description of the problem Publication Date 22nd July 2014 emerald Quick Installation Guide 3 Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Warning English Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. French Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning - For FCC Labelled emerald Terminals This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept an interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Installation of this device shall be performed by a qualified person in accordance to all local regulations. This system must be installed within the protected premise in accordance with the National Electrical Code (NFPA70), and the local authorities having jurisdiction. Equipment changes or modifications without the approval of the party responsible for compliance could void the user's authority to operate the equipment and could create a hazardous condition. TSR-UL-0020-1 4 This page is intentionally blank. Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.1 Terminal specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.1.1 CEM emerald product codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.1.2 UL-294 grading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.1.3 Terminal dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1.4 Part ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1.5 emerald terminal key components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.2 Simplified AC2000 Network Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

emerald™ TSR - Intelligent Access Terminal Intelligent Acce ss Te rminal with VoIP Int ercom & Remote Appl ications Functional Description Document – Rev 3 Description emerald TSR is a Door Access Controller. It controls access through doors by reading RFID identification tags and granting, or denying, individual access based on a database of users, or via instruction from a remote human supervisor. The door is locked, or released, by means of an electrically operated lock controlled by the TSR. In conjunction with CEM’s security management system, TSR also provides users with a multifunctional touch screen access terminal to access a range of remote server-based applications. TSR has built in Voice over IP (VoIP) intercom functionality which enables users to communicate directly with a human system supervisor. Features • Card Reader & Door Access Controller in one device. • Supports wide range of RFID smart card technologies, including ISO-14443A and ISO15693 compatible cards. • User-friendly 4.3 ̋ capacitive LCD touch screen with an intuitive Graphical User Interface at the door. • Integrated VoIP intercom functionality and PIR motion detection. • Ability to run Remote Applications from a Central Database Server using secure communications. • Ethernet with onboard PoE+ technology to power the terminal and additional door furniture. • Four analogue inputs to monitor alarm conditions. • Two dry contact, changeover, relay outputs to activate door strikes or other equipment. • Off-line database for up to 250,000 cardholder records, and up to 50,000 transaction events. TSR FCC / IC application material Page 2 of 3 14 th August 2014 Specification Key Features’ Details TSR Models The TSR/100/105 is the base model of this intelligent access terminal with normal access control facilities. The TSR/200/105 is the mid range model of intelligent access terminal with additional VoIP intercom facility enabled. The TSR/300/105 is the top range model of intelligent access terminal with additional VoIP intercom and Remote Applications enabled. All three models are electronically identical and also use the same version of firmware. A licensing code system is used to enable / disable different functionality in the units so a base system can be purchased and later upgraded without having to change hardware or firmware. Off-Line Card Validation & Database The TSR has a large internal database that enables it to operate in off-line mode. In off-line mode the terminal can hold up to 250,000 cardholder records. The database is stored in non-volatile FLASH memory. The TSR remains fully functional in the event of a communications failure or disconnect from the central server. The TSR has the facility to store a transaction record of up to 50,000 events, also in non-volatile FLASH memory. The TSR has the ability to run Remote Applications that are hosted on the central server. These Remote Applications display critical statistics and important information for system maintenance, such as top system alarms and most recent alarms, directly at the door. Additional applications include ‘First and Last swipes’ for time and attendance purposes, ‘Your Card Details’ and ‘Scheduled Visitors. TSR FCC / IC application material Page 3 of 3 14 th August 2014 LCD Touch Screen & User Interface The TSR has a bright, full colour, touch sensitive, scrollable 4.3 ̋ graphical LCD screen. With hardened glass and an anti-glare coating, the TSR is durable enough for indoor and outdoor use. The TSR can display predefined messages and icons to cardholders depending on their privileges e.g. Wrong Door, Lost/Stolen Card, Expiring Card and Access Granted. The screen can also be used to display advertising and information announcements. It’s built in mini PIR sensor provides energy saving motion detection and a multicoloured LED provides users with a visual indication of access status. The TSR can detect when a person approaches and lighten the display in response to the approach, or darken if to save energy. RFID The TSR is an RFID reader and door access controller in one. It can read a wide range of 13.56MHz RFID cards in multiple formats – ISO-14443A and ISO-15693. The TSR is compatible with multiple security formats, both cryptographic and encryption. VoIP Intercom Functionality and Passive Infra-Red Detector (on TSR 200 & 300 models) The TSR terminal features a built-in microphone and speaker to support fully integrated access control and intercom functionality. This allows for two-way conversation between the user at the terminal and a workstation operator. The operator has the ability to accept or reject the call request and can remotely open the door. The operator can also choose to initiate a call with the emerald terminal. Remote Applications (on TSR 300 models only) The TSR can run remote applications similar in concept to apps on smart phones. A range of apps have been produced for specific functions. These are available to the customer when the TSR is licensed as a TSR/300/105. Interfaces The TSR terminal features an on-board 10/100Mbps PoE+ compatible Ethernet connection and communicates directly with the host server. The TSR can be used and configured through local and remote configuration. The TSR can communicate with local devices such as door interface units using its on board RS-485 and RS-232 serial communication interfaces. It can also communicate with third party read-heads using the industry standard Wiegand interface and can read 4 analogue input signals which can be configured by customer. Mounting The TSR consists of two parts: the back-box which has an I/O PCB and the front-box which has the main PCB, LCD and Core Board. The back-box is mounted to a fixture and the external connections are wired in. The front-box is then connected to the back-box by way of a flying ribbon cable, and the Ethernet connection is made (if used). The front- box is then screwed to the back-box to seal the complete unit.

AN RADIO TEST REPORT FOR CONTROLLED ELECTRONIC MANAGEMENT SYSTEMS LIMITED ON EMERALD TSR V9 DOCUMENT NO.TRA-021653-00-47-00A Total number of pages: 38 TRaC Wireless Test Report : TRA-021653-00-47-00A Applicant : Controlled Electronic Management Systems Limited Apparatus : Emerald TSR V9 Specification(s) : CFR47 Part 15 (c) & RSS-210 Purpose of Test : Certification FCCID : QABTSR105V910 Certification Number : 12009A-TSR105V910 Authorised by : : Radio Product Manager Issue Date : 6 th August 2014 Authorised Copy Number : PDF TRaC Global Test Report: TRA-021653-00-47-00A 3 Contents Section 1: Introduction 4 1.1 General 4 1.2 Tests Requested By 5 1.3 Manufacturer 5 1.4 Apparatus Assessed 5 1.5 Test Result Summary 6 1.6 Notes Relating To the Assessment 7 1.7 Deviations from Test Standards 7 Section 2: Measurement Uncertainty 8 2.1 Measurement Uncertainty Values 8 Section 3: Modifications 10 3.1 Modifications Performed During Assessment 10 Appendix A: Formal Emission Test Results 11 A1 Transmitter Intentional Emission Radiated 12 A2 Frequency Tolerance 13 A3 Occupied Bandwidth 14 A4 Radiated Electric Field Emissions 15 A5 Power Line Conducted Emissions 20 Appendix B: Supporting Graphical Data 22 Appendix C: Additional Test and Sample Details 27 Appendix D: Additional Information 33 Appendix E: Calculation of the duty cycle correction factor 34 Appendix F: Photographs and Figures 35 TRaC Global Test Report: TRA-021653-00-47-00A 4 Section 1: Introduction 1.1 General This report contains an assessment of an apparatus against Electromagnetic Compatibility Standards based upon tests carried out on samples submitted to the Laboratory. Test performed by: TRaC Global [ ] Unit E South Orbital Trading Park Hedon Road Hull, HU9 1NJ. United Kingdom. Telephone: +44 (0) 1482 801801 Fax: +44 (0) 1482 801806 TRaC Global [X] Unit 1 Pendle Place Skelmersdale West Lancashire, WN8 9PN United Kingdom Telephone: +44 (0) 1695 556666 Fax: +44 (0) 1695 577077 Email: [email protected] Web site: http://www.tracglobal.com Tests performed by: A. Tosif Report author: A. Tosif This report must not be reproduced except in full without prior written permission from TRaC Global. TRaC Global Test Report: TRA-021653-00-47-00A 5 1.2 Tests Requested By This testing in this report was requested by: Controlled Electronic Management Systems Limited t/a Tyco Security Products 195 Airport Road Belfast Northern Ireland BT3 9ED 1.3 Manufacturer As Above 1.4 Apparatus Assessed The following apparatus was assessed between 01 July 2014 and 07 July 2014: • Emerald TSR V9 The above device is a door access RFID reader. It has got two variants given below. • Emerald TSR V9 powered by POE • Emerald TSR V9 powered by 12V battery Radiated spurious emission is done on both variants. TRaC Global Test Report: TRA-021653-00-47-00A 6 1.5 Test Result Summary Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. The statements relating to compliance with the standards below apply ONLY as qualified in the notes and deviations stated in sections 1.6 to 1.7 of this test report. Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. Test Type Regulations Measurement standard Result Title 47 of the CFR: Part 15 Subpart (c) RSS – 210 Issue 8 & RSS-Gen Issue 3 In-Band Emissions Title 47 of the CFR: Part 15 Subpart (c) 15.225 (a)(b)(c) RSS – 210 Issue 8 (A2.6) ANSI C63.10 Pass Out-of-Band Emissions Title 47 of the CFR: Part 15 Subpart (c) 15.225(d) RSS – 210 Issue 8 (A2.6) ANSI C63.10 Pass Frequency Tolerance Title 47 of the CFR: Part 15 Subpart (c) 15.225(e) RSS – 210 Issue 8 (A2.6) ANSI C63.10 Pass Intentional Emission Band Occupancy Title 47 of the CFR: Part 15 Subpart (c) 15.215(c) RSS – Gen Issue 3 4.6.1 ANSI C63.10 Pass AC Power conducted emissions Title 47 of the CFR: Part 15 Subpart (c); 15.207 RSS-GEN Issue 3 7.2.4 ANSI C63.10 Pass Abbreviations used in the above table: CFR : Code of Federal Regulations ANSI : American National Standards Institution REFE : Radiated Electric Field Emissions PLCE : Power Line Conducted Emissions TRaC Global Test Report: TRA-021653-00-47-00A 7 1.6 Notes Relating To the Assessment With regard to this assessment, the following points should be noted: The results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 1.7 of this test report (Deviations from Test Standards). For emissions testing, throughout this test report, “Pass” indicates that the results for the sample as tested were below the specified limit (refer also to Section 2, Measurement Uncertainty). Where relevant, the apparatus was only assessed using the monitoring methods and susceptibility criteria defined in this report. All testing with the exception of testing at the Open Area Test Site was performed under the following environmental conditions: Temperature : 17 to 23 °C Humidity : 45 to 75 % Barometric Pressure : 86 to 106 kPa All dates used in this report are in the format dd/mm/yy. This assessment has been performed in accordance with the requirements of ISO/IEC 17025. 1.7 Deviations from Test Standards There were no deviations from the standards tested to. TRaC Global Test Report: TRA-021653-00-47-00A 8 Section 2: Measurement Uncertainty 2.1 Measurement Uncertainty Values For the test data recorded in accordance with note (iii) of Section 2.1 the following measurement uncertainty was calculated: Radio Testing – General Uncertainty Schedule All statements of uncertainty are expanded standard uncertai…

Text truncated - open the document above for the full version.