QISALE-L02Smart Phone

Quick Start Guide P8 lite For more information Read the Quick Start Guide included with your device. Go to http://consumer.huawei.com/en/ to download the user guide for your device (including safety information) and read the FAQ, privacy policy, and other information. Go to Settings > About phone > Legal information to read the legal information. Please visit http://consumer.huawei.com/en/support/hotline/ for the most up-to-date contact information for your country or region. Your phone at a glance Before you start, let's take a look at your new phone. Press and hold the power button to turn your phone on or off. To forcibly restart your phone, press and hold the power button until your phone vibrates. Headset jack Microphone Speaker Microphone Earpiece Home Return Recent Status indicator Light sensor Front camera Volume button Power button Micro USB port microSD card slot Micro-SIM card slot Getting started Follow the instructions in the following figures to set up your phone. Do not insert or remove a SIM card when your phone is turned on. Please exercise caution when using the SIM ejector pin to avoid hurting your fingers or damaging your phone. Store your pin in a safe place out of the reach of children to prevent them from swallowing it or injuring themselves by accident. The upper card slot may not support nano-SIM cards. If it does not, you can insert only a microSD card into it. Locking and unlocking the screen Press the power button to lock the screen. If your phone is idle for a specified period of time, the screen will automatically lock itself. If the screen is off, press the power button to turn it on. Slide your finger in any direction to unlock the screen. Calling and messaging Touch to make a call using the dialer. You can also touch a phon e number in your contacts, or a number in a message, email, web page, or other screen to place a call. Touch to send a text or multimedia message. You can save p hotos, audio clips, videos, and other attachments from received multimedia messages. Camera Touch . Frame the scene you want to capture . Let your camera focus automatically or touch the screen to focus on a specific object. Then touch to take a photo. Swipe left or right to switch between different capture modes. Internet connection You can access the Internet over Wi-Fi or a mobile data network. Swipe down from the status bar to open the notification panel. Touch to turn on mobile data. Touch and hold to go to the Wi-Fi settings screen. Turn on Wi- F i and connect to a Wi-Fi network. Turn off mobile data when you don't need it to reduce your mobile data usage. Phone manager Touch . You can quickly scan your phone for potential risks w ith one touch. Follow the onscreen instructions to use one-touch optimization, or manually clean the system storage and manage your applications. Touch the options on the screen to clear system trash, set the harassment filter, activate power saving mode, manage your applications' notification permissions, and more. Legal Notice Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manua l may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android™ is a trademark of Google Inc. LTE is a trade mark of ETSI. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Other trademarks, product, service and company names mentioned may be th e property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase. Huawei reserves the right to change or modify any information or s pecifications contained in this manual without prior notice and without any liability. Third-Party Software Statement Huawei does not own the intellectual property of the third-party software and applications that are delivered with this product. Therefore, Huawei will not provide any warranty of any kind for third party software and applications. Neither will Huawei provide support to customers who use third-party software and applications, nor be responsible or liable for the functions or performance of third-party software and applications. Third-party software and applications services may be interrupted or te rminated at any time, and Huawei does not guarantee the availability of any content or service. Third-party service providers provide content and services through network or transmission tools outside of the control of Huawei. To the greatest extent permitted by applicable law, it is explicitly stated that Huawei shall not compensate or be liable for services provided by third-party service providers, or the interruption or termination of third-party contents or services. Huawei shall not be responsible for the legality, quality, or any other as pects of any software installed on this product, or for any uploaded or downloaded third-party works in any form, including but not limited to texts, images, videos, or software etc. Customers shall bear the risk for any and all effects, including incompatibility betwee…

Text truncated - open the document above for the full version.

Justification Letter Date (2015-04-22) BABT TCB Balfour House, Churchfield Road, Walton-on- Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Hereby to do the Justification on original FCC application Product name: Smart Phone; Model name: HUAWEI ALE- L23, ALE-L23 FCC ID: QIS ALE- L23 as following: The difference between HUAWEI ALE-L23, ALE-L23 (Product Type: Smart Phone; Model No.: HUAWEI ALE-L23, ALE-L23; FCC ID: QISALE- L23, Grant date: 2015-04-15) and HUAWEI ALE-L02, ALE-L02 ( Product Type: Smart Phone; Model No.: HUAWEI ALE-L02, ALE-L02; FCC ID: QIS ALE - L02) as below: The followed table shows the detailed differences Model HUAWEI ALE-L23, ALE-L23 HUAWEI ALE-L02, ALE-L02 FCC ID QISALE-L23 QISALE-L02 Frequency GSM :850/1900 UMTS:B2/B5/B4 LTE:B2/B4/B7 GSM :850/1900 UMTS:B5 LTE:B5/7 Frequency disabled or added by software. Hardware Version HL3ALICEM HL3ALICEM Sof tware Version ALE- L23 V100R001C900B045 ALE- L02 V100R001C900B045 Dimensions The same The same Appearance The same The same main antenna The same The same Div antenna (Only RX) The same The same BT/Wi-Fi antenna The same The same Others The same The s ame Model HUAWEI ALE-L23, ALE-L23 HUAWEI ALE-L02, ALE-L02 So in FCC application for Product name: Smart Phone Model name: HUAWEI ALE-L02, ALE-L02 (FCC ID: QIS ALE -L02), New Test report for FCC Part 15B have been submitted, and this report according to Part 15B is valid and applicable and it is representative of the compliance of HUAWEI ALE-L02, ALE-L02. Test data for Bluetooth (DSS part) report refer to report “I15N00174-BT” in FCC application for HUAWEI ALE-L23, ALE-L23 ( FCC ID: QISALE -L23, Grant date: 2015-04-15), and this data according to Part 15C remains valid and applicable and they are representative of the compliance of HUAWEI ALE- L02, ALE-L02. Test data for Bluetooth 4.0(DTS part) report refer to report “I15N00174-BLE” in FCC application HUAWEI ALE-L23, ALE-L23 ( FCC ID: QISALE -L23, Grant date: 2015-04-15), and this data according to Part 15C remains valid and applicable and they are representative of the compliance of HUAWEI ALE- L02, ALE-L02. Test data for 2.4GHz WLAN(DTS part) report refer to report “I15N00174-WLAN” in FCC application for HUAWEI ALE-L23, ALE-L23 ( FCC ID: QISALE- L23 , Grant date: 2015-04-15), and this data according to Part 15C remains valid and applicable and they are representative of the compliance of HUAWEI ALE-L02, ALE-L02. Test data for GSM refer to report “I15N00174-2G” in FCC application for HUAWEI ALE-L23, ALE-L23 (FCC ID: QISALE- L23, Grant date: 2015-04-15), and this data according to Part 22, 24 remains valid and applicable and they are representative of the compliance of HUAWEI ALE-L02, ALE-L02. Test data for UMTS refer to report “I15N00174-3G” in FCC application for HUAWEI ALE-L23, ALE- L23 ( FCC ID: QISALE -L23, Grant date: 2015-04-15), and this data according to Part 22, 24 remains valid and applicable and they are representative of the compliance of HUAWEI ALE-L02, ALE-L02. Test data for LTE B7 refer to report “I15Z40418-GTE01” in FCC application for HUAWEI ALE-L23, ALE- L23 ( FCC ID: QISALE -L23, Grant date: 2015-04-15), LTE band 5 test data has been tested ,and this data according to Part 27 remains valid and applicable and they are representative of the compliance of HUAWEI ALE-L02, ALE-L02. SAR: GSM850/1900 and W850 and LTE band7 test data was refer to report “I15Z40418-SEM01” in FCC application for HUAWEI ALE-L23, ALE-L23 ( FCC ID: QISALE- L23, Grant date: 2015-04-15), LTE band 5 test data has been tested in HUAWEI ALE-L02, ALE-L02, and these data comply with the SAR requirement. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Date (2015-04-22) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Felix Li Phone: +86-755-88286998-3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: FCC ID: QISALE-L02 Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

Statements Date (2015-04-22) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Hereby to confirm that our device, FCC ID: QISALE-L02, is shipped with the battery pre-installed and the FCC ID is readily visible when users open the product box. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Federal Communications Commission 2015/4/22 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISALE-L02 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2015-5- 20: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

Huawei Technologies Co., Ltd Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China +86 755 28780808 www.huawei.com Declaration of Letter Product Type: Smart Phone Model No.: HUAWEI ALE-L02, ALE-L02 The two four models are identical, only difference is the model name. And the two models have the same technical construction, including software design, RF module, antennas, circuit design and PCB layout. There are no differences between the two models (HUAWEI ALE-L02, ALE-L02) on electrical and mechanical construction. Sincere ly, For and Behalf of: Huawei Technologies Co., Ltd. Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China

HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 4/23/2015 Page1,Total 3 External Photos of HUAWEI ALE-L02, ALE-L02 HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 4/23/2015 Page2,Total 3 01. Front-HUAWEI ALE-L02,ALE-L02 02. Back- HUAWEI ALE-L02,ALE-L02 HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 4/23/2015 Page3,Total 3 03. Left- HUAWEI ALE-L02,ALE-L02 04. Right- HUAWEI ALE-L02,ALE-L02 05. Bottom- HUAWEI ALE-L02,ALE-L02 06. Top- HUAWEI ALE-L02,ALE-L02

HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 2015-4-23 Page1, Total2 Label & Label Location： HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 2015-4-23 Page2, Total2

HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 2015-04-23 Page1, Total4 Internal Photos of HUAWEI ALE-L02, ALE-L 02 HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 2015-04-23 Page2, Total4 HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 2015-04-23 Page3, Total4 HUAWEI ALE-L02, ALE-L02 Smart Phone SECRET 2015-04-23 Page4, Total4

©Copyright. All rights reserved by CTTL. SAR TEST REPORT No. I15Z40836-SEM01 For Huawei Technologies Co., Ltd. Smart Phone Model Name: HUAWEI ALE-L02, ALE-L02 With Hardware Version: HL3ALICEM Software Version: ALE-L02 V100R001C900B045 FCC ID: QISALE-L02 Issued Date: 2015-04-15 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 51 Shouxiang Science Building, Xueyuan Road, Haidian District, Beijing, P. R. China100191 Te l:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email: [email protected], website:www.chinattl.com TESTING CNAS L0570 No.I15Z40836-SEM01 Page 2 of 146 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Issue Date Description I15Z40836-SEM01 Re v.0 2015-04-15 Initial creation of test report No.I15Z40836-SEM01 Page 3 of 146 ©Copyright. All rights reserved by CTTL. TABLE OF CONTENT 1 TEST LABORATORY .................................................................................................................... 5 1.1 TESTING LO C AT I O N ........................................................................................................................................ 5 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5 1.3 PROJECT DATA ............................................................................................................................................... 5 1.4 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE .................................................................................................. 6 3 CLIENT INFORMATION ................................................................................................................ 8 3.1 APPLICANT INFORMATION .............................................................................................................................. 8 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 8 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................. 9 4.1 ABOUT EUT ................................................................................................................................................... 9 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 9 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................ 9 5 TEST METHODOLOGY .............................................................................................................. 10 5.1 APPLICABLE LIMIT REGULATIONS ................................................................................................................ 10 5.2 APPLICABLE MEASUREMENT STANDARDS .................................................................................................... 10 6 SPECIFIC ABSORPTION RATE (SAR) ...................................................................................... 11 6.1 INTRODUCTION ............................................................................................................................................. 11 6.2 SAR DEFINITION .......................................................................................................................................... 11 7 TISSUE SIMULATING LIQUIDS ................................................................................................. 12 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 12 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 12 8 SYSTEM VERIFICATION ............................................................................................................ 17 8.1 SYSTEM SETUP ............................................................................................................................................. 17 8.2 SYSTEM VERIFICATION ................................................................................................................................. 18 9 MEASUREMENT PROCEDURES .............................................................................................. 19 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 19 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 20 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 21 9.4 SAR MEASUREMENT FOR LT E ..................................................................................................................... 22 9.5 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 23 9.6 POWER DRIFT ............................................................................................................................................... 23 10 AREA SCAN BASED 1-G SAR ................................................................................................. 24 10.1 REQUIREMENT OF KDB .............................................................................................................................. 24 10.2 FAST SAR ALGORIT…

Text truncated - open the document above for the full version.

No.I15Z40836-SEM01 Page 51 of 146 ©Copyright. All rights reserved by CTTL. Combined standard uncertainty ∑ = = 21 1 22' i iic ucu 9.25 9.12 257 Expanded uncertainty (confidence interval of 95 %) ce uu2= 18.5 18.2 16.2 Measurement Uncertainty for Normal SAR Tests (3~6GHz) No. Error Description Type Uncertainty value Probably Distribution D iv. (Ci) 1g (Ci) 10g Std. Unc. (1g) Std. Unc. (10g) Degree of freedo m Measurement system 1 Probe calibration B 6.5 N 1 1 1 6.5 6.5 ∞ 2 Isotropy B 4.7 R 3 0.7 0.7 1.9 1.9 ∞ 3 Boundary effect B 2.0 R 3 1 1 1.2 1.2 ∞ 4 Linearity B 4.7 R 3 1 1 2.7 2.7 ∞ 5 Detection limit B 1.0 R 3 1 1 0.6 0.6 ∞ 6 Readout electronics B 0.3 R 3 1 1 0.3 0.3 ∞ 7 Response time B 0.8 R 3 1 1 0.5 0.5 ∞ 8 Integration time B 2.6 R 3 1 1 1.5 1.5 ∞ 9 RF ambient conditions-noise B 0 R 3 1 1 0 0 ∞ 10 RFambient conditions-reflection B 0 R 3 1 1 0 0 ∞ 11 Probe positioned mech. restrictions B 0.8 R 3 1 1 0.5 0.5 ∞ 12 Probe positioning with respect to phantom shell B 6.7 R 3 1 1 3.9 3.9 ∞ 13 Post-processing B 4.0 R 3 1 1 2.3 2.3 ∞ Test sample related 14 Test sample positioning A 3.3 N 1 1 1 3.3 3.3 71 15 Device holder uncertainty A 3.4 N 1 1 1 3.4 3.4 5 16 Drift of output power B 5.0 R 3 1 1 2.9 2.9 ∞ Phantom and set-up 17 Phantom uncertainty B 4.0 R 3 1 1 2.3 2.3 ∞ 18 Liquid conductivity (target) B 5.0 R 3 0.64 0.43 1.8 1.2 ∞ 19 Liquid conductivity (meas.) A 2.06 N 1 0.64 0.43 1.32 0.89 43 No.I15Z40836-SEM01 Page 52 of 146 ©Copyright. All rights reserved by CTTL. 20 Liquid permittivity (target) B 5.0 R 3 0.6 0.49 1.7 1.4 ∞ 21 Liquid permittivity (meas.) A 1.6 N 1 0.6 0.49 1.0 0.8 521 Combined standard uncertainty ∑ = = 21 1 22' i iic ucu 10.8 10.7 257 Expanded uncertainty (confidence interval of 95 %) ce uu2= 21.6 21.4 16.3 Measurement Uncertainty for Fast SAR Tests (300MHz~3GHz) No. Error Description Type Uncertainty value Probably Distribution D iv. (Ci) 1g (Ci) 10g Std. Unc. (1g) Std. Unc. (10g) Degree of freedo m Measurement system 1 Probe calibration B 5.5 N 1 1 1 5.5 5.5 ∞ 2 Isotropy B 4.7 R 3 0.7 0.7 1.9 1.9 ∞ 3 Boundary effect B 1.0 R 3 1 1 0.6 0.6 ∞ 4 Linearity B 4.7 R 3 1 1 2.7 2.7 ∞ 5 Detection limit B 1.0 R 3 1 1 0.6 0.6 ∞ 6 Readout electronics B 0.3 R 3 1 1 0.3 0.3 ∞ 7 Response time B 0.8 R 3 1 1 0.5 0.5 ∞ 8 Integration time B 2.6 R 3 1 1 1.5 1.5 ∞ 9 RF ambient conditions-noise B 0 R 3 1 1 0 0 ∞ 10 RFambient conditions-reflection B 0 R 3 1 1 0 0 ∞ 11 Probe positioned mech. Restrictions B 0.4 R 3 1 1 0.2 0.2 ∞ 12 Probe positioning with respect to phantom shell B 2.9 R 3 1 1 1.7 1.7 ∞ 13 Post-processing B 1.0 R 3 1 1 0.6 0.6 ∞ 14 Fast SAR z-Approximation B 7.0 R 3 1 1 4.0 4.0 ∞ Test sample related 15 Test sample positioning A 3.3 N 1 1 1 3.3 3.3 71 16 Device holder uncertainty A 3.4 N 1 1 1 3.4 3.4 5 17 Drift of output power B 5.0 R 3 1 1 2.9 2.9 ∞ No.I15Z40836-SEM01 Page 53 of 146 ©Copyright. All rights reserved by CTTL. Phantom and set-up 18 Phantom uncertainty B 4.0 R 3 1 1 2.3 2.3 ∞ 19 Liquid conductivity (target) B 5.0 R 3 0.64 0.43 1.8 1.2 ∞ 20 Liquid conductivity (meas.) A 2.06 N 1 0.64 0.43 1.32 0.89 43 21 Liquid permittivity (target) B 5.0 R 3 0.6 0.49 1.7 1.4 ∞ 22 Liquid permittivity (meas.) A 1.6 N 1 0.6 0.49 1.0 0.8 521 Combined standard uncertainty ∑ = = 22 1 22' i iic ucu 10.1 9.95 257 Expanded uncertainty (confidence interval of 95 %) ce uu2= 20.2 19.9 16.4 Measurement Uncertainty for Fast SAR Tests (3~6GHz) No. Error Description Type Uncertainty value Probably Distribution D iv. (Ci) 1g (Ci) 10g Std. Unc. (1g) Std. Unc. (10g) Degree of freedo m Measurement system 1 Probe calibration B 6.5 N 1 1 1 6.5 6.5 ∞ 2 Isotropy B 4.7 R 3 0.7 0.7 1.9 1.9 ∞ 3 Boundary effect B 2.0 R 3 1 1 1.2 1.2 ∞ 4 Linearity B 4.7 R 3 1 1 2.7 2.7 ∞ 5 Detection limit B 1.0 R 3 1 1 0.6 0.6 ∞ 6 Readout electronics B 0.3 R 3 1 1 0.3 0.3 ∞ 7 Response time B 0.8 R 3 1 1 0.5 0.5 ∞ 8 Integration time B 2.6 R 3 1 1 1.5 1.5 ∞ 9 RF ambient conditions-noise B 0 R 3 1 1 0 0 ∞ 10 RFambient conditions-reflection B 0 R 3 1 1 0 0 ∞ 11 Probe positioned mech. Restrictions B 0.8 R 3 1 1 0.5 0.5 ∞ 12 Probe positioning with respect to phantom shell B 6.7 R 3 1 1 3.9 3.9 ∞ 13 Post-processing B 1.0 R 3 1 1 0.6 0.6 ∞ 14 Fast SAR z-Approximation B 14.0 R 3 1 1 8.1 8.1 ∞ Test sample related No.I15Z40836-SEM01 Page 54 of 146 ©Copyright. All rights reserved by CTTL. 15 Test sample positioning A 3.3 N 1 1 1 3.3 3.3 71 16 Device holder uncertainty A 3.4 N 1 1 1 3.4 3.4 5 17 Drift of output power B 5.0 R 3 1 1 2.9 2.9 ∞ Phantom and set-up 18 Phantom uncertainty B 4.0 R 3 1 1 2.3 2.3 ∞ 19 Liquid conductivity (target) B 5.0 R 3 0.64 0.43 1.8 1.2 ∞ 20 Liquid conductivity (meas.) A 2.06 N 1 0.64 0.43 1.32 0.89 43 21 Liquid permittivity (target) B 5.0 R 3 0.6 0.49 1.7 1.4 ∞ 22 Liquid permittivity (meas.) A 1.6 N 1 0.6 0.49 1.0 0.8 521 Combined standard uncertainty ∑ = = 22 1 22' i iic ucu 13.3 13.2 257 Expanded uncertainty (confidence interval of 95 %) ce uu2= 26.6 26.4 17 MAIN TEST INSTRUMENTS Table 17.1: List of Main Instruments No. Name Type Serial Number Calibration Date Valid Period 01 Network analyzer E5071C MY46110673 February 03, 2015 One year 02 Power meter NRVD 102196 March 03, 2015 One year 03 Power sensor NRV-Z5 100596 04 Signal Generator E4438C MY49071430 February 02, 2015 One Year 05 Amplifier 60S1G4 0331848 No Calibration Requested 06 BTS E5515C MY50263375 January 30, 2015 One year 07 BTS CMW500 129942 March 03, 2015 One year 08 E-field Probe SPEAG EX3DV4 3846 September 24, 2014 One year 09 DAE SPEAG DAE4 777 September 17, 2014 One year 10 Dipole Validation Kit SPEAG D835V2 4d069 August 28, 2014 One year 11 Dipole Validation Kit SPEAG D1900V2 5d101 July 23, 2014 One year 12 Dipole Validation Kit SPEAG D2450V2 853 July 24, 2014 One year 13 Dipole Validation Kit SPEAG D2600V2 1012 July 16, 2014 One year ***END OF REPORT BODY*** No.I15Z40836-SEM01 Page 55 of 146 ©Copyright. All rights reserved by CTTL. ANNEX A Graph Results 850 Right Cheek Middle Date: 2015- 3- 14 Electronics: DAE4 Sn777 Medium: Head 850 MHz Mediu…

Text truncated - open the document above for the full version.

No.I15Z40836-SEM01 Page 101 of 146 ©Copyright. All rights reserved by CTTL. ANNEX E Equivalent Media Recipes The liquid used for the frequency range of 800-3000 MHz consisted of water, sugar, salt, preventol, glycol monobutyl and Cellulose. The liquid has been previously proven to be suited for worst-case. The Table E.1 shows the detail solution. It’s satisfying the latest tissue dielectric parameters requirements proposed by the IEEE 1528 and IEC 62209. TableE.1: Composition of the Tissue Equivalent Matter Frequency (MHz) 835Head 835Body 1900 Head 1900 Body 2450 Head 2450 Body 5800 Head 5800 Body Ingredients (% by weight) Water 41.45 52.5 55.242 69.91 58.79 72.60 65.53 65.53 Sugar 56.0 45.0 \ \ \ \ \ \ Salt 1.45 1.4 0.306 0.13 0.06 0.18 \ \ Preventol 0.1 0.1 \ \ \ \ \ \ Cellulose 1.0 1.0 \ \ \ \ \ \ Glycol Monobutyl \ \ 44.452 29.96 41.15 27.22 \ \ Diethylenglycol monohexylether \ \ \ \ \ \ 17.24 17.24 Triton X-100 \ \ \ \ \ \ 17.24 17.24 Dielectric Parameters Target Value ε=41.5 σ=0.90 ε=55.2 σ=0.97 ε=40.0 σ=1.40 ε=53.3 σ=1.52 ε=39.2 σ=1.80 ε=52.7 σ=1.95 ε=35.3 σ=5.27 ε=48.2 σ=6.00 Note: There are a little adjustment respectively for 750, 1750, 2600, 5200, 5300 and 5600 based on the recipe of closest frequency in table E.1. No.I15Z40836-SEM01 Page 102 of 146 ©Copyright. All rights reserved by CTTL. ANNEX F System Validation The SAR system must be validated against its performance specifications before it is deployed. When SAR probes, system components or software are changed, upgraded or recalibrated, these must be validated with the SAR system(s) that operates with such components. Table F.1: System Validation Probe SN. Liquid name Validation date Frequency point Status (OK or Not) 3846 Head 750MHz Oct.25,2014 750 MHz OK 3846 Head 850MHz Oct.25,2014 850 MHz OK 3846 Head 900MHz Oct.26,2014 900 MHz OK 3846 Head 1750MHz Oct.27,2014 1750 MHz OK 3846 Head 1810MHz Oct.27,2014 1810 MHz OK 3846 Head 1900MHz Oct.28,2014 1900 MHz OK 3846 Head 1950MHz Oct.28,2014 1950 MHz OK 3846 Head 2000MHz Oct.28,2014 2000 MHz OK 3846 Head 2100MHz Oct.28,2014 2100 MHz OK 3846 Head 2300MHz Oct.29,2014 2300 MHz OK 3846 Head 2450MHz Oct.29,2014 2450 MHz OK 3846 Head 2550MHz Oct.29,2014 2550 MHz OK 3846 Head 2600MHz Oct.29,2014 2600 MHz OK 3846 Head 3500MHz Oct.30,2014 3500 MHz OK 3846 Head 3700MHz Oct.30,2014 3700 MHz OK 3846 Head 5200MHz Oct.24,2014 5200 MHz OK 3846 Head 5500MHz Oct.24,2014 5500 MHz OK 3846 Head 5800MHz Oct.24,2014 5800 MHz OK 3846 Body 750MHz Oct.25,2014 750 MHz OK 3846 Body 850MHz Oct.25,2014 850 MHz OK 3846 Body 900MHz Oct.26,2014 900 MHz OK 3846 Body 1750MHz Oct.27,2014 1750 MHz OK 3846 Body 1810MHz Oct.27,2014 1810 MHz OK 3846 Body 1900MHz Oct.28,2014 1900 MHz OK 3846 Body 1950MHz Oct.28,201…

Text truncated - open the document above for the full version.