QISSMARTLOGGER310Solar Smart Monitor & Data Logger

SmartLogger3000 User Manual Issue 04 Date 2020-03-11 HUAWEI TECHNOLOGIES CO., LTD. Issue 04 (2020-03-11) Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: https://e.huawei.com SmartLogger3000 User Manual About This Document Issue 04 (2020-03-11) Copyright © Huawei Technologies Co., Ltd. ii About This Document Purpose This document introduces the SmartLogger3000 (SmartLogger for short) and SmartModule1000 (SmartModule for short) in terms of installation, electrical connections, system operation and maintenance, and troubleshooting. Understand the SmartLogger and SmartModule features, functions, and safety precautions provided in this document before installing and operating the SmartLogger and SmartModule. Intended Audience This document is intended for photovoltaic (PV) plant operators and qualified electricians. Symbol Conventions The symbols that may be found in this document are defined as follows: Symbol Description Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. SmartLogger3000 User Manual About This Document Issue 04 (2020-03-11) Copyright © Huawei Technologies Co., Ltd. iii Change History Updates between document issues are cumulative. The latest document issue contains all changes made in previous issues. Issue 04 (2020-03-11) Updated 6.2.1 Preparations and WebUI Login. Issue 03 (2020-01-10) Added the description about the SmartModule. Issue 02 (2019-12-18) Updated 6 WebUI Operations. Updated 9.1 Technical Specifications of the SmartLogger. Issue 01 (2019-09-24) This issue is used for first office application (FOA). SmartLogger3000 User Manual Contents Issue 04 (2020-03-11) Copyright © Huawei Technologies Co., Ltd. iv Contents About This Document .................................................................................................................... ii 1 Safety Information ........................................................................................................................ 1 1.1 General Safety .............................................................................................................................................................. 1 1.2 Personnel Requirements ............................................................................................................................................... 2 1.3 Electrical Safety ............................................................................................................................................................ 3 1.4 Installation Environment Requirements ....................................................................................................................... 4 1.5 Mechanical Safety ........................................................................................................................................................ 4 1.6 Commissioning ............................................................................................................................................................. 5 1.7 Maintenance and Replacement ..................................................................................................................................... 5 2 Product Overview ......................................................................................................................... 6 2 .1 SmartLogger ................................................................................................................................................................. 6 2.1.1 Model ......................................................................................................................................................................... 6 2.1.2 Networking ................................................................................................................................................................ 8 2.1.3 Appearance .........................................................................................................…

Text truncated - open the document above for the full version.

Regulatory Compliance Statement Issue Date HUAWEI TECHNOLOGIES CO., LTD. Issue () Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, People's Republic of China Website: http://www.huawei.com Email: [email protected] 1 Regulatory Compliance Information Issue () Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1 Regulatory Compliance Information About This Chapter 1.1 European Regulatory Compliance 1.2 U.S.A Regulatory Compliance 1.3 Canada Regulatory Compliance 1.4 China Regulatory Compliance 1.5 Other Markets 1.1 European Regulatory Compliance Solar Smart Monitor & Data Logger (model: SmartLogger3000A00GL) product complies with the following European directives and regulations.  2014/53/EU (RED)  2011/65/EU & (EU) 2015/863 (RoHS)  (EC) NO. 1907/2006 (REACH)  2012/19/EU (WEEE)  94/62/EC (Packaging)  2006/66/EC &2013/56/EU (Batteries and accumulators) CE Marking: The following CE mark identifier and affixed to the equipment and packaging: 1.1.1 RED In accordance with Article 10.2 in Directive 2014/53/EU (RED), this device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. 1 Regulatory Compliance Information Issue () Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2 FREQUENCY BANDS AND MAXIMUM RF POWER In accordance with Article 10.8 in Directive 2014/53/EU (RED),  WLAN 2.4 GHz: < 20 dBm EIRP ACCESSORIES Using unapproved or incompatible accessories may cause fire, explosion or other hazards. Choose only accessories approved for use with this device by the manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. It is recommended that the following accessories should be used (Note: different product packages may deliver different accessory lists. The actual delivered accessory list prevails): Adapters: HW-24-12AC14D SOFTWARE  Version: V300R001 RF EXPOSURE (HEALTH) This device complies with relevant RF radiation exposure limits set forth for a public/uncontrolled environment. This equipment should be installed and/or operated with a minimum distance as below between the radiator and your body:  Council Recommendation 1999/519/EC: 0.2 meters 1.1.2 EMC Electrostatic discharge: CAUTION ESD Protection Always wear ESD gloves or an ESD wrist strap prior to contact with the equipment or before handling devices, boards, or IC chips to prevent damage to sensitive components due to electrostatic discharge from the human body. Ensure that the ESD wrist strap is properly grounded. For information about how to wear an ESD wrist strap, see Figure below. 1 Regulatory Compliance Information Issue () Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 3 Wearing an ESD wrist strap Cables and shielding. EMC performance is dependent upon the use of correct cables of good quality for all external connections when installing this equipment, ensure compliance with cable/connector specifications and associated installation instructions where given elsewhere in the product manual. Where shielded cables are required and no specific requirement in the product manual then the following good practices shall be implemented:  Multi-conductor cables should be of double-braided shielded type and have conductive connector bodies and backshells with cable clamps that are conductively bonded to the backshell and capable of making 360 degree connection to the cable shielding.  Ethernet cables should be of the double-shielded type.  Coaxial cables should be of the double-braided shielded type.  The shielded cables should be grounded at both end. 1.1.3 WEEE Solar Smart Monitor & Data Logger (model: SmartLogger3000A00GL) product complies with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). Huawei is responsible for recycling its end-of-life devices, and please contact Huawei local service center when recycling is required. Huawei strictly complies with the EU Waste Electrical and 1 Regulatory Compliance Information Issue () Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 4 Electronic Equipment Directive (WEEE Directive) and electronic waste management regulations enacted by different countries worldwide. In addition, Huawei has established a system for recycling and reuse of electronic wastes, and it can provide service of dismantling and recycling for WEEE. By Huawei recycling system, the waste ca…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. [2020-03-05] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Huawei Technologies Co., Ltd. FCC ID: QISSMARTLOGGER310 To Whom It May Concern: We, Huawei Technologies Co., Ltd., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number QISSMARTLOGGER310 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 2020-03-05. The Limited Agency Agreement expires on 2021-03-05, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, [Signature] [Zhang Xinghai] [EMC Laboratory Manager]

1(2) Huawei Technologies Co., Ltd. Attention: Certification reviewer RE: Request for Confidentiality FCC ID: QISSMARTLOGGER310 To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user’s manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required: 1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request to withhold from public review for a period of [please enter 1 to 180] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant [Select one or more of items below that are not selected in the list above, as appropriate] Schematics Block diagrams Operational Description Tune-up Procedure 2(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, _________________ [Zhang Xinghai] [EMC Laboratory Manager] 2020-03-05

EUT Appearance Report No.: R1910H0226 TA Technology (Shanghai) Co., Ltd. Page 1 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance EUT Appearance Report No.: R1910H0226 TA Technology (Shanghai) Co., Ltd. Page 2 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R1910H0226 TA Technology (Shanghai) Co., Ltd. Page 3 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. a: EUT EUT Appearance Report No.: R1910H0226 TA Technology (Shanghai) Co., Ltd. Page 4 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. b: Adapter EUT Appearance Report No.: R1910H0226 TA Technology (Shanghai) Co., Ltd. Page 5 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. c: LAN line Picture 1: Constituents of EUT

The location of product label Size: 100*70mm

Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 12 EMF Report (FCC Maximum Permissible Exposure) Product Model: SmartLogger3000A00GL Report Number: SYBH(R-EMF)05970465-5 FCC ID: QISSMARTLOGGER310 Global Compliance and Testing Center of Huawei Technologies Co., Ltd. (Reliability Laboratory of Huawei Technologies Co., Ltd.) No.2 New City Avenue, Songshan Lake Sci. &Tech. Industry Park, Dongguan, 523808, P.R.C. Tel: +86 769 23830808, Fax: +86 769 23837628 EMF Report for SmartLogger3000A00GL FCC ID: QISSMARTLOGGER310 Public Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 12 NOTICE 1. The laboratory has passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been recognized by the US Federal Communications Commission (FCC) to perform compliance testing subject to the Commission's Certification rules. The Designation Number is CN1173, and the Test Firm Registration Number is 294140. 4. The laboratory (Reliability Laboratory of Huawei Technologies Co., Ltd.) is also named as "Global Compliance and Testing Center of Huawei Technologies Co., Ltd."; the both names have coexisted since 2009. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 9. All dates in the test report, including attachment document(s) (if applicable), have the format of “yyyy-MM-dd”. 10. If any question about this report, please contact the laboratory ([email protected]). EMF Report for SmartLogger3000A00GL FCC ID: QISSMARTLOGGER310 Public Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 12 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Product Model: SmartLogger3000A00GL Date of Receipt Sample: 2019-12-30 Start Date of Test: 2019-12-30 End Date of Test: 2020-03-05 Test Result: Pass Approved by Senior Engineer: 2020-03-05 Li Jing Date Name Signature Prepared by: 2020-03-05 Zhang Weimin Date Name Signature EMF Report for SmartLogger3000A00GL FCC ID: QISSMARTLOGGER310 Public Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 12 MODIFICATION RECORD No. Report No. Modification Description 1 SYBH(R-EMF)05970465-5 First report. EMF Report for SmartLogger3000A00GL FCC ID: QISSMARTLOGGER310 Public Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 12 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 RF Exposure Requirements ................................................................................................................................... 7 3 RF Exposure Evaluation ......................................................................................................................................... 8 3.1 Determine the exposure limits .................................................................................................................... 8 3.2 Compliance evaluation ............................................................................................................................... 8 4 Conclusion ............................................................................................................................................................ 10 Annex A General RF Exposure Guidelines Information (Informative) .................................................................... 11 EMF Report for SmartLogger3000A00GL FCC ID: QISSMARTLOGGER310 Public Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 12 1 General Information 1.1 Applied Standard FCC Rules: 47CFR Part 1 ____________________ Note: The most up to date FCC rules are applied. Other References: FCC OET Bulletin 65 FCC KDB Publication 447498 IEEE Std C95.3™ -2002 1.2 Test Location Test Location 1 (TL1): Global Compliance and Testing Center of Huawei Technologies Co., Ltd. (Reliability Laboratory of Huawei Technologies Co., Ltd.) Address: No.2 New City Avenue, Songshan Lake Sci. &Tech. Industry Park, Dongguan, 523808, P.R.C 1.3 Test Environment Condition Ambient Temperature: Not applicable Ambient Relative Humidity: Not applicable Atmospheric Pressure: Not applicable EMF Report for SmartLogger3000A00GL FCC ID: QISSMARTLOGGER310 Public Report No.: SYBH(R-EMF)05970465-5 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 7 of 12 2 RF Exposure Requirements According to FCC Part §1.1310(e), the maximum permissible exposure (MPE) to radiof…

Text truncated - open the document above for the full version.

RF TEST REPORT Applicant Huawei Technologies Co., Ltd FCC ID QISSMARTLOGGER310 Product SmartLogger3000A00GL Model SmartLogger3000A00GL Report No. R1910H0226-R1V4 Issue Date March 13, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2018). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 RF Test Report Report No.: R1910H0226-R1V4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 2 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ............................................................................................................................ 4 1.1. Notes of the test report ......................................................................................................... 4 1.2. Testing Location ................................................................................................................... 4 2. General Description of Equipment under Test .............................................................................. 5 2.1. Applicant and Manufacturer Information ............................................................................... 5 2.2. General information .............................................................................................................. 5 3. Applied Standards ........................................................................................................................ 6 4. Test Configuration ........................................................................................................................ 7 5. Test Case Results ........................................................................................................................ 9 5.1. Maximum output power ........................................................................................................ 9 5.2. Occupied Bandwidth .......................................................................................................... 11 5.3. Band Edge ......................................................................................................................... 17 5.4. Power Spectral Density ...................................................................................................... 19 5.5. Spurious RF Conducted Emissions .................................................................................... 23 5.6. Unwanted Emission ........................................................................................................... 27 5.7. Conducted Emission .......................................................................................................... 62 6. Main Test Instruments ................................................................................................................ 65 RF Test Report Report No.: R1910H0226-R1V4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 3 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results Number Test Case Clause in FCC rules Verdict 1 Maximum conducted output power 15.247(b)(3) PASS 2 6 dB bandwidth 15.247(a)(2) PASS 3 Power spectral density 15.247(e) PASS 4 Band Edge 15.247(d) PASS 5 Spurious RF Conducted Emissions 15.247(d) PASS 6 Unwanted Emissions 15.247(d),15.205,15.209 PASS 7 Conducted Emissions 15.207 PASS Date of Testing: November 1, 2019~ November 30, 2019 Note: This revised report (Report No.: R1910H0226-R1V4) supersedes and replaces the previously issued report (Report No.: R1910H0226-R1V3). Please discard or destroy the previously issued report and dispose of it accordingly. RF Test Report Report No.: R1910H0226-R1V4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 4 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the test report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] RF Test Report Report No.: R1910H0226-R1V4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 5 of 65 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. A…

Text truncated - open the document above for the full version.