QISAP5030DNWireless LAN Access Point

AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN Hardware Installation and Maintenance Guide Issue 12 Date2015-08-05 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://e.huawei.com Issue 12 (2015-08-05)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Intended Audience This document describes hardware features of AP3x10xN, 5x10xN, 5x30xN, 6x10xN and 7x10xN, and provides basic installation methods. This document is intended for: lNetwork planning engineers lHardware installation engineers lCommissioning engineers lOnsite maintenance engineers lSystem maintenance engineers Symbol Conventions The symbols that may be found in this document are defined as follows. SymbolDescription Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN Hardware Installation and Maintenance GuideAbout This Document Issue 12 (2015-08-05)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii SymbolDescription NOTE Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. Change History Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues. Issue 12 (2015-08-05) This version has the following updates: Updated the packing list. Issue 11 (2015-05-18) This version has the following updates: The following information is modified: lAdded the command to check AP running status in V200R006C00. lAdded descriptions about PoE fault troubleshooting. Issue 10 (2014-12-05) This version has the following updates: The following information is added: l1.4 Ordering Information. Issue 09 (2014-07-30) This version has the following updates: The following information is modified: lOptimized the installation steps. The following information is added: lLogging in to the AP using STelnet. Issue 08 (2013-04-10) This version has the following updates: The following information is added: AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN Hardware Installation and Maintenance Guide About This Document Issue 12 (2015-08-05)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii lAP5030DN and AP5130DN installation guide lNote: The network cable cannot exceed 100 meters. Issue 07 (2014-01-15) This version has the following updates: Optimized the manual. Issue 06 (2013-09-30) This version has the following updates: The following information is modified: lAP's default IP address and login password Issue 05 (2013-06-29) This version has the following updates: The following information is modified: lFigure for converting SMA connectors to type—N connectors Issue 04 (2013-04-30) This version has the following updates: The following information is modified: lFigure of the sheet metal mounting brackets delivered with APs Issue 03 (2013-01-30) This version has the following updates: The following information is added: lDescriptions about power adapters delivered with APs lSection: Removing an AP Issue 02 (2012-12-31) This version has the following updates: The following information is added: lPower adapter cable connection figure Issue 01 (2012-10-31) Initial commercial release AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN Hardware Installation and Maintenance Guide About This Document Issue 12 (2015-08-05)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iv Contents About This Document.....................................................................................................................ii 1 Indoor AP Overview.....................................................................................................................1 1.1 Device Structure.............................................................................................................................................................1 1.2 Indicator Description......................................................................................................................................................4 1.3 Basic Specifications...............................…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Headquarters of Huawei, Technologies Co., Ltd., Bantian, Longgang District City: Shenzhen Country: China Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Wireless LAN Access Point Type designation: AP5030DN Trademark: HUAWEI on our behalf. Date: 2015-08-19 City: Shenzhen Name: Zhang Xinghai Signature:  . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Report No.: BTL-FICP-1-1505C259C Page 1 of 333 FCC&IC Radio Test Report FCC ID: QISAP5030DN IC: 6369A-AP5030DN This report concerns (check one): Original Grant Class II Change Project No. : 1505C259C Equipment : Wireless LAN Access Point Model Name : AP5030DN Applicant : Huawei Technologies Co.,Ltd. Address for FCC : Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District Shenzhen China Address for IC : Administration Building, Headquarters of Huawei Technologies Co., Ltd.,Bantian, Longgang District, Shenzhen 518129 China Date of Receipt : Jul. 09, 2015 Date of Test : Jul. 09, 2015 ~ Aug. 12, 2015 Issued Date : Aug. 13, 2015 Tested by : BTL Inc. Testing Engineer : (Shawn Xiao) Technical Manager : (David Mao) Authorized Signatory : (Steven Lu) BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FICP-1-1505C259C Page 2 of 333 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s report must not be used by the client to claim product certification, approval, or endorsement b y NVLAP, NIST, or any agency of the Federal Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FICP-1-1505C259C Page 3 of 333 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 3.5 DESCRIPTION OF SUPPORT UNITS 14 4 . EMC EMISSION TEST 15 4.1 CONDUCTED EMISSION MEASUREMENT 15 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 15 4.1.2 TEST PROCEDURE 15 4.1.3 DEVIATION FROM TEST STANDARD 15 4.1.4 TEST SETUP 16 4.1.5 EUT OPERATING CONDITIONS 16 4.1.6 EUT TEST CONDITIONS 16 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 TEST PROCEDURE 18 4.2.3 DEVIATION FROM TEST STANDARD 18 4.2.4 TEST SETUP 19 4.2.5 EUT OPERATING CONDITIONS 20 4.2.6 EUT TEST CONDITIONS 20 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 21 4.2.8 TEST RESULTS (30MHZ TO 1000 MHZ) 21 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 21 5 . BANDWIDTH TEST 22 5.1 APPLIED PROCEDURES 22 5.1.1 TEST PROCEDURE 22 5.1.2 DEVIATION FROM STANDARD 22 5.1.3 TEST SETUP 22 5.1.4 EUT OPERATION CONDITIONS 22 5.1.5 EUT TEST CONDITIONS 22 5.1.6 TEST RESULTS 22 Report No.: BTL-FICP-1-1505C259C Page 4 of 333 Table of Contents Page 6 . MAXIMUM PEAK CONDUCTED OUTPUT POWER TEST 23 6.1 APPLIED PROCEDURES / LIMIT 23 6.1.1 TEST PROCEDURE 23 6.1.2 DEVIATION FROM STANDARD 23 6.1.3 TEST SETUP 23 6.1.4 EUT OPERATION CONDITIONS 23 6.1.5 EUT TEST CONDITIONS 23 6.1.6 TEST RESULTS 23 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 24 7.1 APPLIED PROCEDURES / LIMIT 24 7.1.1 TEST PROCEDURE 24 7.1.2 DEVIATION FROM STANDARD 24 7.1.3 TEST SETUP 24 7.1.4 EUT OPERATION CONDITIONS 24 7.1.5 EUT TEST CONDITIONS 24 7.1.6 TEST RESULTS 24 8 . POWER SPECTRAL DENSITY TEST 25 8.1 APPLIED PROCEDURES / LIMIT 25 8.1.1 TEST PROCEDURE 25 8.1.2 DEVIATION FROM STANDARD 25 8.1.3 TEST SETUP 25 8.1.4 EUT OPERATION CONDITIONS 25 8.1.5 EUT TEST CONDITIONS 25 8.1.6 TEST RESULTS 25 9 . MEASUREMENT INSTRUMENTS LIST 26 10 . EUT TEST PHOTO 28 ATTACHMENT A - CONDUCTED EMISSION 32 ATTACHMENT B - RADIATED EMISSION (9KHZ TO 30MHZ) 35 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 37 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 44 ATTACHMENT E - BANDWIDTH 93 ATTACHMENT F – MAXIMUM PEAK CONDUCTED OUTPUT POWER 102 ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION 116 ATTACHMENT H - POWER SPECTRAL DENSITY 253 Report No.: BTL-FICP-1-1505C259C Page 5 of 333 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FICP-1-1505C259C Original Issue. Aug. 13, 2015 Report No.: BTL-FICP-1-1505C259C Page 6 of 333 1. CERTIFICATION Equipment : Wireless LAN Access Point Brand Name : HUAWEI Model Name : AP5030DN Applicant : Huawei Technologies Co.,Ltd. Manufacturer : Huawei Technologies Co.,Ltd. Address : Administration Building, Huawei Base, Bantian, Longgang District ,Shenzhen 518129, P.R.China Factory : Huawei Technologies Co.,Ltd. Address : Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R.China Date of Test : Jul. 09, 2015 ~ Aug. 12, 2015 Test Sample : Engineering Sample Standard(s) : FCC Part15, Subpart C: 2014 (15.247) / ANSI C63.10-2013 Canada RSS-247 Issue 1, May 2015 RSS-GEN Issue 4, Nov 2014 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FICP-1-1505C259C) were obtained utilizing the test procedures, te…

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-1-1505C259C Page 28 of 333 10. EUT TEST PHOTO Conducted Measurement Photos Report No.: BTL-FICP-1-1505C259C Page 29 of 333 Radiated Measurement Photos 9KHz to 30MHz Report No.: BTL-FICP-1-1505C259C Page 30 of 333 Radiated Measurement Photos 30MHz to 1000MHz Report No.: BTL-FICP-1-1505C259C Page 31 of 333 Radiated Measurement Photos Above 1000MHz