QISAP6010DN-AGNWireless LAN Access Point

AP6310SN-GN&AP6010DN-AGN &AP6010SN-GN&AP6510DN-AGN &AP6610DN-AGN Compliance and Safety Manual Issue 01 Date 2012-07-31 HUAWEI TECHNOLOGIES CO., LTD. Issue (2012-8-3) Huawei Technologies Proprietary i Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] Compliance and Safety Manual Contents Issue (2012-8-3) Huawei Technologies Proprietary iii About This Document Intended Audience This document describes Electromagnetic Compatibility (EMC) and other safety standards compliance and information about the AP. This document provides the general safety guidelines for handling, installing or operating the AP. This document is intended for:  Maintenance engineers  Technical support engineers  Installation engineers  Network planning engineers Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. Contents Compliance and Safety Manual iv Huawei Technologies Proprietary Issue (2012-8-3) Change History Changes between document issues are cumulative. Therefore, the latest document issue contains all the changes in previous issues. Changes in Issue 01 (2012-07-31) Initial commercial release. Compliance and Safety Manual Contents Issue (2012-8-3) Huawei Technologies Proprietary v Contents 1 Regulatory Compliance Statement ......................................................................................... 1-1 1.1 European Community CE Certification DoC ................................................................................................ 1-2 2 Regulatory Compliance Information ..................................................................................... 2-1 2.1 Regulatory Compliance Standards ................................................................................................................ 2-1 2.2 European Directives Compliance .................................................................................................................. 2-3 2.3 USA Regulatory Compliance ........................................................................................................................ 2-4 2.3.1 FCC Part 15.......................................................................................................................................... 2-4 2.3.2 FCC Part 68.......................................................................................................................................... 2-5 2.4 Canada Regulatory Compliance .................................................................................................................... 2-5 2.4.1 RSS-Gen & RSS-210 statement ........................................................................................................... 2-5 2.5 CISPR 22 Compliance .................................................................................................................................. 2-5 3 Safety Information ..................................................................................................................... 3-6 3.1 Overview ....................................................................................................................................................... 3-7 3.1.1 Safety Precautions ................................................................................................................................ 3-7 3.1.2 General Requirements .......................................................................................................................... 3-7 3.2 Electricity Safety ........................................................................................................................................... 3-9 3.2.1 High Voltage ........................................................................................................................................ 3-9 3.2.2 Thunderstorm ....................................................................................................................................... 3-9 3.2.3 Tools .......................................................................................................…

Text truncated - open the document above for the full version.

HUAWEI TECHNOLOGIES CO., LTD. AP6010DN-AGN Wireless LAN Access Point Quick Start Guide Huawei Technologies Co., Ltd. Address: Administration Building,Huawei Technologies Co., Ltd.,Bantian,Longgang District,Shenzhen,People’s Republic of China Postcode: 518129 Website: http://www.huawei.com Email: [email protected] Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. 1 Change History Changes between document issues are cumulative. Therefore，the latest document issue contains all the Changes in previous issues. Change in Issue 01 (2012-05-30) Initial commercial release. Symbol Conventions The symbols that may be found in this document are defined as follows. SymbolDescription NOTE CAUTION Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. 2 Please download the detailed product documents from "http://support.huawei.com/support/". The dEtaIled path is as follows: Technical Support->Documentation->Access Network -> WLAN ->WLAN -> Product Documentation ->AP6010DN. AP6010DN-AGN Quick Start Guide Before performing Installation, confirm that the installation accessories and tools are available. Installation accessories: Technical Support Huawei Technologies Co., Ltd. Address:Administration Building,Huawei Technologies Co., Ltd.,Bantian,Longgang District,Shenzhen,People’s Republic of China Postcode:518129 Email:[email protected] Website:http://www.huawei.com Flat-head screwdriver Device Overview Indicator and Interfaces Unpack the equipment. Ensure that all items listed in the package list are included in the shipment. If any item is missing, contact the supplier. Front view 1 2 3 4 5 1 Item Quantity Unit AP device Sheetmetal wall-mounting bracket 6 Quick Start Guide (including the printed packing list) Power adapter（Optional） 7 8 1 Warranty card Certificate of Conformance Packing List Expansion bolt Sheetmetal wall-mounting bracket Expansion bolt Toxic or Hazardous Substance & Elements Declaration 1 Installation tools: Phillips screwdriver Maker Wire stripper Utility knife Cable cutter RJ45 Crimping tool Combination pliers Diagonal pliers ESD gloves COAX crimping tool Adjustable wrench Measuring tape Hammer drill Multimeter Hammer Level Vacuum cleaner Network Cable tester 1 1 3 1 1 PCS PCS PCS PCS PCS PCS PCS PCS Item Quantity Unit Indicators 1 2345 3 2 3 4 5 Connected to the maintenance terminal. Connected to a PoE power supply or switch, or connected to the Ethernet. Description No. Name DC 12V Console ETH/PoE Default Connected to the power adapter. 1 Indicator For details about indicator, see the Power-on. Perspective Press and hold down the Reset button for 3 seconds to restore the factory settings and restart the AP. 6mm drill bit Installing the AP Select an appropriate installation position and leave 20 cm space above and around the device for cooling air circulation. AP6010DN dimensions (unit: mm) without a backplane supportRecommended AP6010DN installation space (unit: mm) The AP6010DN can be installed onto a workbench or mounted against a wall. In addition, the AP6010DN can be mounted to a T-rail and mounted against the ceiling. Wall-mount the AP6010DN using the plastic wall-mounting bracket: 180 1 8 0 50 Field strength 场强示意 Field strength 场强示意 1. Fix the wall-mounting bracket to the wall, adjust the installation position, and use the marker to mark the drilling positions where expansion bolts are installed. 2. Use #6 drill bit to drill 25-30 mm deep holes in the drilling positions. Hammer the expansion tubes into the holes until the expansion tubes are embedded into the wall. 3. Fix the wall-mounting bracket to the wall, use the Phillips screwdriver to fasten three self-tapping screws into the expansion tube. 4. Align the holes at the rear side of the AP with the hooks on the bracket and hang the AP on the bracket. Hold the AP with one hand and press the AP downwards with another hand to secure the AP on the wall. 59mm 8 5 m m Underfloor cabling 4 Installing the AP Ceiling-mount the AP6010DN using the sheetmetal wall-mounting bracket: 1. Remove the ceiling, determine locations of mounting holes based on the distance between two installation holes, use the hammer drill to drill holes, and fix the wall-mounting bracket to the ceiling. 2. Align the cucurbit holes at the rear side of the AP with four screws on the wall-mounting bracket and secure the AP. Adjustable buckle Ceiling M4*30 screw 35mm Adjustable buckle Ceiling Wall-mounting bracket Ensure that the AP is correctly installed on the wall-mounting bracket and there must be 20 cm space above and around the AP for cooling air circulation. Mounting the AP6010DN to the T-rail using the sheetmetal wal…

Text truncated - open the document above for the full version.

AP6010DN-AGN Wireless LAN Access Point V200R001C00 Product Description Issue 01 Date 2012-05-30 HUAWEI TECHNOLOGIES CO., LTD. Issue 01 (2012-05-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] AP6010DN-AGN Wireless LAN Access Point Product Description Contents Issue 01 (2012-05-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii Contents 1 Product Orientation and Characteristics .................................................................................. 1 2 Product Structure........................................................................................................................... 5 3 Functions and Features ................................................................................................................ 7 4 Technical Specifications .............................................................................................................. 9 AP6010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Issue 01 (2012-05-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1 1 Product Orientation and Characteristics Product Orientation The AP6010DN is a standard indoor dual-band 2x2 MIMO access point (AP) that supports 2.4 GHz and 5 GHz frequency bands. It complies with IEEE 802.11a/b/g/n connects a large number of users, and works as a Fit AP. The AP6010DN has the following advantages: z High reliability z High security z Simple network deployment z Automatic AC discovery and configuration z Real-time management and maintenance The AP6010DN is recommended for use in buildings with a simple structure, small area, a high density of users, and require a high capacity, for example, small-scale meeting rooms, bars, and entertainment places. The AP6010DN APs can be flexibly deployed in these places and work in both Fit AP and bridge mode. The AP6010DN is for use in Fit AP and bridge networking scenarios. AP6010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Issue 01 (2012-05-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2 Figure 1-1 Fit AP networking AP n AP1 ...... WLAN terminal Residential users Business users eSight AC Authentication system Switch Management channel between eSight and the AC Management channel between the AC and the AP and data channel where data flows are encapsulated with CAPWAP Channel where data flows are not encapsulated with CAPWAP In this networking, the AP6010DN functions as a Fit AP that provides only data forwarding functions. The AC is responsible for user access, authentication, AP management, and configurations of security protocols, routing, and QoS. Figure 1-2 WDS networking (point-to-point) AP 1 AP 2 LAN Segment 1 LAN Segment 2 AP6010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Issue 01 (2012-05-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 3 Figure 1-3 WDS networking (point-to-multipoint) AP 2 AP 1 AP 3 AP 4 LAN Segment 1 LAN Segment 2 LAN Segment 3 LAN Segment 4 In this networking, the AP6010DN connects two or more independent wired or wireless LANs through wireless links. In a Wireless Distribution System (WDS), the AP6010DN supports point-to-point, point-to-multipoint networking modes. The AP implements wireless bridging and access functions using 5 GHz and 2.4 GHz frequency bands. Product Characteristics The AP6010DN has the following characteristics on the WLAN. Product Characteristics Description Highly reliable wireless access z Complies with IEEE 802.11 a/b/g/n. z Provides a maximum rate of 300 Mbit/s for each radio. z Uses Wi-Fi Multimedia (WMM) to implement priority scheduling based on the service type (voice, video, or data), and implements end-to-end QoS through priority mapping on wireless and wired interfaces. z Supports wired link integrity check. z Supports load balancing. z Supports roaming without service interruptions. z Supports AC hot standby. z Supports the beamforming technique. z Uses the latest 802.11n chip to increase the performance by 20%. z Has a strong coverage capability. Comprehensive user access control capability z Supports access control lists (ACLs) and user access controls based on user group policies. z Provides per-user bandwidth management. z Supports user isolation policies. High security The AP6010DN supports multiple authentication and encryption modes and provides various measures to enhance system security: AP6010…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. 022311 – 6 Authority to Act as Agent Date: 2012-8-3 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: _____ Neutron Engineering, Inc./Cathy Wang is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(2013-3-31)_____ By: __ ___ ____ Xinghai Zhang _____________ (Signature 1 ) (Print name) Title: ______ EMC Laboratory Manager __ __________________ On behalf of: _______ Huawei Technologies Co.,Ltd.__ _________________ (Company Name) Telephone: ______ +86-755-2878-1879 __ __________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Huawei Technologies Co.,Ltd. 022311 – 6 Request for Confidentiality Date: _2012-8-3 _ Subject: Confidentiality Request for: ____ __QISAP6010DN-AGN ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ____________ ______ (Huawei Technologies Co.,Ltd.)______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ____ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: EMC Laboratory Manager ____ Zhang Xinghai ______ (Signature/Title 3 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Neutron Engineering Inc. Project No.: 1204C046A Page 2 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 2 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 3 of 21 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 4 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 4 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 5 of 21 1204C046A

AP6010DN-AGN：

Neutron Engineering Inc. Project No.: 1204C046A Page 6 of 21 Antenna: Amphenol-SAA 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 6 of 21 Antenna: Amphenol-SAA 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 7 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 7 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 8 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 8 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 9 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 9 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 10 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 10 of 21 1204C046A 1204C046A

Neutron Engineering Inc. Project No.: 1204C046A Page 11 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 11 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 12 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 12 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 13 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 13 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 14 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 14 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 15 of 21 1204C046A 1204C046A Neutron Engineering Inc. Project No.: 1204C046A Page 15 of 21 1204C046A 1204C046A

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: QISAP6010DN-AGN Project No. : Jul. 06, 2012 Equipment : 1204C046A Model : Wireless LAN Access Point Applicant : AP6010DN-AGN Address : Huawei Technologies Co.,Ltd. According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna The product has 2 group antenna: Amphenol-SAA and Nippon Antenna(Shanghai) Group 1 Ant. Brand Model Name Antenna Type / Connector function Gain (dBi) 1 Amphenol- SAA N/A Integral TX/RX 5.3 2 Amphenol- SAA N/A Integral TX/RX 5.5 Group 2 Ant. Brand Model Name Antenna Type / Connector function Gain (dBi) 1 (Short) Nippon Antenna (Shanghai) N/A Integral TX/RX 5.79 2 (Long) Nippon Antenna (Shanghai) N/A Integral TX/RX 5.51 Operating Mode TX Mode 1TX 2TX 802.11a V (ANT1 or ANT2) - 802.11n(20MHz) - V (ANT1 & ANT2) 802.11n(40MHz) - V (ANT1 & ANT2) Note: The antenna of EUT could be rotated, but the Antenna Polarity vertical is max. Group 2 was found to be the worst case. The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and two receivers (2T2R). all transmit signals are completely uncorrelated, then, , that is Directional gain=8.66 ; So,the out power limit is 30-8.66+6=27.34 Neutron Engineering Inc. TEST RESULTS EUT： Wireless LAN Access Point Model Name ： AP6010DN-AGN Temperature： 25 °C Relative Humidity： 58 % Pressure： 1010 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX A Mode /CH149, CH157, CH165 (Nippon Antenna(Shanghai)) Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 8.66 7.3451 27.40 549.5409 0.803434301 Complies 8.66 7.3451 27.60 575.4399 0.841298991 Complies 8.66 7.3451 27.00 501.1872 0.732740791 Complies

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 36 of 75 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 37 of 75 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 38 of 75 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 39 of 75 TX (20MHz Mode) Table 1: Short Pulse Radar Test Waveforms. Radar Type Pulse Width (μsec) PRI (μsec) Number of Pulses Number of Trials(Times) Percentage of Successful Detection (%) 1 1 1428 26 30 87% 2 1-5 150-230 28 30 93% 3 6-10 200-500 29 30 97% 4 11-20 200-500 27 30 90% Aggregate (Radar Types 1-4) 110 120 92% Table 2: Long Pulse Radar Test Waveform Radar Type Pulse Width (μsec) Chirp Width (MHz) PRI (μsec) Numberof Pulses Per Burst Number of Bursts Number of Trials (Times) Percentage of Successful Detection (%) 5 50-100 5-20 1000-2000 1-3 26 30 87% Table 3: Frequency Hopping Radar Test Waveform Radar Type Pulse Width (μsec) PRI (μsec) Pulses per Hop Hopping Rate (kHz) Hopping Sequence Length (msec) Number of Trials(Time s) Percentage of Successful Detection (%) 6 1 333 9 0.333 300 30 87% Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 40 of 75 TX (N20 Mode ) Radar signal 1 Note: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time. T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Note: An expanded plot for the device vacates the channel in the required 500ms Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 41 of 75 TX (N20 Mode ) Radar signal 2 Note: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time. T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Note: An expanded plot for the device vacates the channel in the required 500ms Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 42 of 75 TX (N20 Mode ) Radar signal 3 Note: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time. T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 43 of 75 Note: An expanded plot for the device vacates the channel in the required 500ms Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 44 of 75 TX (N20 Mode ) Radar signal 4 Note: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time. T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Note: An expanded plot for the device vacates the channel in the required 500ms Neutron Engineering Inc. Report No.: NEI-FCCP-1-1204C46A Page 45 of 75 TX (N20 Mode ) Radar signal 5 Note: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of Channel Move Time. T4 denotes the 10 second from T1 to observe the aggre…

Text truncated - open the document above for the full version.