QISB593U-501LTE CPE

Thank you for purchasing the Router. This Router brings you a high speed wireless network connection. This document will help you understand your Router so you can start using it right away. Please read this document carefully before using your Router. For detailed information about the functions and configurations of the Router, refer to the online help on the web management page that comes with the Router. Note: You must install Adobe Reader version 6.0 or higher to read the online help. Packing List The following items are included in your Router package. If any items are missing or damaged, please contact your local dealer. If any of the optional accessories are not included in the package, you can contact your local dealer to purchase them separately. Item Quantity LT E R o u t e r 1 Power adapter 1 Ethernet cable 1 USB cable 1 Quick Start Guide 1 External antenna(optional) 2 Getting to Know Your Router Note: The Router function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. ○ 1 Power indicator  On: Device turned on. Note: If only the power light is on with all other lights off for more than 60 seconds, the device has encountered a problem. Please contact your local dealer for maintenance.  Off: Device turned off. ○ 2 WLAN indicator  On: WLAN function enabled.  Blinking: Transmitting data through WLAN.  Off: WLAN function disabled. ○ 3 WPS indicator  Blinking at regular intervals: WPS interconnection verification is in progress. This process should not take longer than two minutes.  Blinking at irregular intervals: The device encountered an event or is warning about a problem. Log in to the web management page to make any necessary configuration changes.  On: WPS function enabled.  Off: WPS function disabled. ○ 4 Wireline indicator  On: The device is accessing the Internet using a wired connection.  Off: The port is currently not available for Internet access. ○ 5 Wireless indicator  On: The device is accessing the Internet using a wireless connection.  Off: The port is currently not available for Internet access. ○ 6 Mode indicator  Steady blue: The device is connected to an LTE network, but no data is being transmitted.  Blinking blue: The device is connected to an LTE network and is transmitting data.  Steady green: The device is connected to a UMTS network, but no data is being transmitted.  Blinking green: The device is connected to a UMTS network and is transmitting data.  Steady orange: The device is connected to a GSM network, but no data is being transmitted.  Blinking orange: The device is connected to a GSM network and is transmitting data.  Blinking white: The device is connecting to a wireless network.  Steady red: The device failed to connect to a wireless network.  Steady Mulberry: The SIM card is not recognized, the PIN has not been entered, or the PIN verification failed.  Off: The device did not connect to any network. ○ 7 Signal indicator  On: Indicates network signal strength. Full light indicates strong signal.  Off: No network signal. ○ 8 SIM card slot Accommodate a SIM card. ○ 9 Power button ○ 10 USB port Connect to a USB storage device or a USB printer (optional). Note: This port cannot be connected to USB host devices such as computers. ○ 11 Power port Connect to the device's power adapter. ○ 12 USB port ○ 13 LAN port Connect to computers, switches, or other network devices. ○ 14 WAN port Connect to a network access point through a network cable. ○ 15 LAN indicator  On: The port is connected to a device.  Blinking: Data is being transmitted through the port.  Off: No device is connected to the port. ○ 16 WAN indicator  On: The port is connected to the Internet.  Blinking: Data is being transmitted through the port.  Off: The port is currently not used. ○ 17 WLAN button 1 2 3 10 7 8 9 11 12 13 14 16 17 15 4 5 6 18 20 19 Press and hold for more than 3 seconds to enable or disable the WLAN function. ○ 18 Reset button  Press and hold for 2 to 5 seconds to restart the device.  Press and hold for more than 5 seconds to restore the device to its factory settings. Note: Restoring the default settings of the Router will override all the previous settings. ○ 19 WPS button After the WPS function is enabled, press and hold this button for more than 2 seconds to initiate WPS interconnection. ○ 20 External antenna port Connect to an external antenna. Note:  On: An indicator is on.  Blinking/Blinking at regular intervals: An indicator turns on and off at regular intervals.  Blinking at irregular intervals: An indicator turns on and off at irregular intervals.  Off: An indicator is off.  All indicators except the power indicator are blinking: The device is being upgraded or is restarting. To avoid damage to the device, do not power off during this process. Connecting a Device to the Router Before connecting the device, please read the safety information carefully. Note:  Power off the Router and remove all cables from the Router in thunderstorms.  Do not use an external antenna or a power adapter that is not a standard component for the Router or is not certified by Huawei. Huawei is not liable for any problems that may result from use of such an external antenna or a power adapter. Selecting the Installation Environment Obstacles such as concrete and wooden walls will affect the transmission of the network signal. It is recommended that when you install devices you choose an open space and ensure that there are no obstructions between the computer and the device. Keep the device away from equipment that generates strong magnetic and electric fields, for instance microwaves, refrigerators, and satellite receivers. Cable Connection When connecting, use the cables and adapters that came as a set with the product. When finished, press the power button to turn on the device. The connection cable illustration is for reference only. When the device is in use, you can alt…

Text truncated - open the document above for the full version.

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd. and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. is a trade mark of ETSI. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd. reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAW S, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the device described in this section includes the device and its accessories. Basic Requirements  During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects.  Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair.  Without authorization, no organization or individual can change the mechanical, safety, or performance design of the device.  When using the device, observe all applicable laws and regulations and respect the legal rights of other people. Medical Device  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. For any such problems, consult your service provider.  If you are using an electronic medical device, consult the doctor or the device manufacturer to confirm whether radio waves affect the operation of this device. Potentially Explosive Atmosphere Do not use your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not use your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security  Observe local laws and regulations while using the device. To prevent accidents, do not use your wireless device while driving.  RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates.  Do not use your device while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Environmental Requirements for Using the Device  Before connecting and disconnecting cables, stop using the device, and then disconnect it from the power supply. Ensure that your hands are dry during operation.  Keep the device far from sources of heat and fire, such as a heater or a candle.  Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator.  Place the device on a stable surface.  Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight. Use the device in an area w…

Text truncated - open the document above for the full version.

Letter of Agency I appoint Intertek Testing Services NA Inc. to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under the FCC rules until further notice. I further certify that no party (as defined in 1.2002 of CFR 47, 1995) to this application, including myself, is subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,853A. Equipment: B593u-501, FCC ID: QISB593U-501 Date: 2012-07-17 Signature: _____________________________________ Name: _ _ Zhang Xinghai___ Title: EMC Laboratory Manager Company: Huawei Technologies Co., Ltd. Telephone: 0086-755-89651014

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: INTERTEK Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISB593U-501 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

B593u-501 SECRET Page1,Total 3 External Photos of B593u-501 B593u-501 SECRET Page2,Total 3 B593u-501 SECRET Page3,Total 3

B593u-501 SECRET Page1, Total 1 ID Label B593u-501

B593u-501 SECRET Page1, Total 1 ID Label Location of B593u-501

B593u-501 SECRET Page1, Total6 Internal Photos of B 593u-501 B593u-501 SECRET Page2, Total6 B593u-501 SECRET Page3, Total6 B593u-501 SECRET Page4, Total6 B593u-501 SECRET Page5, Total6 B593u-501 SECRET Page6, Total6

EMC Test Report Product Name: LTE CPE Model Number: B593u-501 Report No: SYBH(Z-EMC)051072012-2 FCC ID: QISB593U-501 IC ID: 6369A-B593U501 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 Test Report of LTE CPE FCC ID:QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH(Z-EMC)018052012-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total17 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 9. Normally, the test report is only responsible for the samples that have undergone the test. 10. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Test Report of LTE CPE FCC ID:QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH(Z-EMC)018052012-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total17 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Test Item: June 28, 2012 Start Date of Test: July 02, 2012 End Date of Test: July 08, 2012 Test Result: Pass Approved By (Lab Manager) Date Name Signature 2012-07-12 Liuchunlin Operator 2012-07-12 Liuqingbin Date Name Signature Test Report of LTE CPE FCC ID:QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH(Z-EMC)018052012-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total17 Modification Record No. Last Report No. Modification Description 1 NA First report Test Report of LTE CPE FCC ID:QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH(Z-EMC)018052012-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total17 TABLE OF CONTENT 1 General Information ............................................................................................................................. 6 1.1 EUT Description ........................................................................................................................... 6 1.2 Test Site Information .................................................................................................................... 7 1.3 Applied Standards ........................................................................................................................ 7 2 Summary of Results ............................................................................................................................. 8 3 System Configuration during EMC Test .............................................................................................. 9 3.1 Test Mode ..................................................................................................................................... 9 3.2 Test System Configurations ......................................................................................................... 9 3.3 Cables Used during Test ............................................................................................................ 10 3.4 Associated Equipment Used during Test .................................................................................. 10 4 Electromagnetic Interference (EMI) ................................................................................................... 11 4.1 Radiated Disturbance 30MHz to 18GHz ................................................................................... 11 4.2 Conducted Disturbance 0.15 MHz to 30MHz ............................................................................ 13 5 Main Test Instruments ........................................................................................................................ 14 6 System Measurement Uncertainty .................................................................................................... 14 7 Test Data and Graph .......................................................................................................................... 15 7.1 Radiated Disturbance ................................................................................................................. 15 7.2 Conducted Disturbance .............................................................................................................. 17 Test Report of LTE CPE FCC ID:QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH(Z-EMC)018052012-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total17 1 General Information 1.1 EUT Description EUT Description Product Name LTE CPE Model Number B593u-501 Serials Number K7M01A9260800103 Working Voltage 12Vdc TX Frequency …

Text truncated - open the document above for the full version.

FCC Test Report of B593u-501 FCC ID: QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH-(Z-EMC)051072012-2 Confidential Information of Huawei. No Distribution without Permission Page1, Total5 Photos of EUT FCC Test Report of B593u-501 FCC ID: QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH-(Z-EMC)051072012-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total5 Figure1 EUT Appearance FCC Test Report of B593u-501 FCC ID: QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH-(Z-EMC)051072012-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total5 Photos of Test Setup FCC Test Report of B593u-501 FCC ID: QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH-(Z-EMC)051072012-2 Confidential Information of Huawei. No Distribution without Permission Page4, Total5 1 Radiated Emissions Radiated Disturbance （30MHz-1GHz） Radiated Disturbance （above 1GHz） FCC Test Report of B593u-501 FCC ID: QISB593U-501 IC ID:6369A-B593U501 Security Level:secret Report No: SYBH-(Z-EMC)051072012-2 Confidential Information of Huawei. No Distribution without Permission Page5, Total5 2 Conducted Emissions Conducted Emissions for AC Ports