QISB882-66LTE Wireless Gateway

B882-66 LTE Wireless Gateway Quick Start 96722859_01 3 1 Gett ing to know your B882-66 Power indicator  On: the B882-66 is powered on.  Off: the B882-66 is powered off. Network mode indicator  Blinking red: no USIM card is found, the PIN is not verified, or the USIM card is not working properly.  Steady cyan: registered with an LTE network.  Steady blue: registered with a 3G network.  Off: no signal. Wi-Fi/WPS indicator  Steady on: Wi-Fi turned on or data transfer in progress.  Blinking: a WPS connection is being set up.  Off: Wi-Fi turned off. SMS indicator  Steady on: inbox is full.  Blinking: new messages. Call status indicator  Steady on: call in progress.  Blinking: incoming call. 4 Wireless connection indicator  Steady on: connected to a LTE/3G network.  Blinking: connecting to a LTE/3G network. // LAN indicator  Steady on: LAN port is connected to a client.  Blinking: data is being transmitted through LAN port.  Off: no client is connected to LAN port. Wired connection indicator  Steady on: connected to an Ethernet network.  Blinking: connecting to an Ethernet network. USIM card slot Install a USIM card to access to the Internet via a LTE/3G data connection. Dial-up button The B882-66 can access the Internet in Auto, Manual, or On Demand mode. In Manual mode, press it to manually connect to or disconnect from the Internet. Wi-Fi/WPS button  Press and hold for about 3 seconds to turn on or off Wi-Fi.  Press and hold for 6 or more seconds to active WPS connection when Wi-Fi is turned on. Reset button Restoring the default sett ings of the B882-66 wil l erase al l previous settings. When the B882-66 is powered on, use a sharply pointed object to press and hold for about 3 seconds until all indicators are blinking to restore the B882-66 to its factory settings. After the factory defaults are restored, the B882-66 will restart automatically. WAN port Connect to an Ethernet port on the wall through a network cable if you want to access to the Internet via wired way. // LAN port Connect to computer, switch, or other LAN device. 5 Telephone port Connect to telephone. Power port Connect to compatible power adapter. Power button Press and hold for about 3 seconds to power the B882-66 on or off. 6 2 Instal lat ion Installing the USIM card If you want to use LTE/3G wireless data service and voice service, please instal l the USIM card. 1. Pull out the card slot cover and rotate it to reveal the USIM card slot. 2. Partially insert the USIM card into the card slot. Ensure that the beveled edge of the USIM card aligns with that of the card slot. Gently push the card until it clicks into place. 3. Close the card slot cover. Before instal ling or removing the USIM card, ensure that the B882-66 is powered off and disconnected from the power outlet. 7 Connecting cables Once connected to a power outlet, the B882-66 automat ically powers on. Ethernet port on the wall Computer Telephone Power adapter Laptop, tablet, or smart phone To prevent interference caused by radio signals, place the B882-66 at least 1 meter (3.28 feet) away from telephone and other electrical devices. Do not connect the B882-66 to the telephone wal l outlet (or any Public Switched Telephone Network), because doing so could damage the B882-66 due to excessive heat. 8 3 Sett ing up a Wi-Fi connect ion Turning on Wi-Fi on the B882-66 When the indicator is steady on, the Wi-Fi of the B882-66 is turned on. To manual ly turn Wi-Fi on, press and hold the button for about 3 seconds. Recording the SSID and Wi-Fi key The default SSID and Wi-Fi key are printed on the B882-66's rear label. Make sure your client (computer, tablet, or smart phone) also supports Wi-Fi. To prevent unauthorized part ies from accessing your wireless network, it is recommended that you change the SSID and Wi-Fi key from t ime to t ime. For details, see the help informat ion on the web management page. 9 Setting up a Wi-Fi connection from a client On Windows 7 1. Click on the status bar on the PC desktop. 2. A dialog box is displayed, and the computer scans for available wireless networks within range. From the search results, select the wireless network with the same SSID as the B882-66, and click Connect. 3. In the Connect to a Network dialog box, enter the B882-66's Wi-Fi key, and click OK. Note that the Wi-Fi key is case sensitive. 4. When Connected is displayed next to the B882-66's SSID, the PC is connected to the wireless network. 10 On Mac OS 1. Click on the status bar on the Mac desktop. Choose Turn AirPort On from the displayed menu. 2. The Mac then scans for available wireless networks within range. From the search results, select the wireless network with the same SSID as the B882-66. 3. In the displayed dialog box, enter the B882-66's Wi-Fi key, and click Join. Note that the Wi-Fi key is case sensitive. 4. When a check mark appears next to the B882-66's SSID, the Mac is connected to the wireless network. 11 On Android 4.0 1. From the home screen, touch > Settings. In the WIRELESS & NETWORKS section, turn Wi-Fi on. 2. Touch WLAN to display the settings screen. Your device then scans for available wireless networks within range. From the search results, touch the wireless network with the same SSID as the B882-66. 3. In the displayed dialog box, enter the Wi-Fi key, and touch Connect. Note that the Wi-Fi key is case sensitive. 4. When Connected is displayed under the B882-66's SSID, the device is connected to the wireless network. 12 Setting up a Wi-Fi connection through WPS If the client supports WPS, you can set up a WPS connect ion as follows: 1. Ensure that Wi-Fi is enabled on the client. 2. Press and hold the button for 6 or more seconds. The indicator then starts blinking. 3. Activate the WPS connection on the client in 2 minutes. 4 Conf iguring your B882-66 1. After a client is connected to the B882-66 through Wi-Fi or LAN port, launch a browser on the client and visit http://192.168.1.1. 2. Enter the password (admin by defaul…

Text truncated - open the document above for the full version.

Date (03/26/2014) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou, Checkpoint Road 2, Nanshan District Shenzhen 518052 P. R. China Felix.Li Phone: +86-755-88286998-3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: FCC ID: QISB882-66 This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2014-03-26 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISB882-66 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2014-6-20 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755- 28970299

Justification Letter Date (08/04/2014) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Hereby to do the Justification on original FCC and IC application: LTE Wireless Gateway, Model no.:B882-66, FCC ID: QISB882-66, IC: 6369A-B88266 as following: B882-66 is a LTE Wireless Gateway, it is a subscriber equipment in the WCDMA/LTE system, also supports wireless Internet accessing function, routing function, network address translation (NAT) function. The HSPA+/WCDMA frequency band is Band 2/4/5. The LTE frequency band includes Band 2/4/5/7/12/13/17. And the TX/RX band is 2400MHz~2483MHz for WLAN. B890-L66 (FCC ID: QISB882-66 granted data 2012-10-15: IC: 6369A-B88266, Approval date: 2014- 02-21) is a LTE Wireless Gateway, it is a subscriber equipment in the WCDMA/LTE system, also supports wireless Internet accessing function, routing function, network address translation (NAT) function. The HSPA+/WCDMA frequency band is Band 2/4/5. The LTE frequency band includes Band 2/4/5/7/12/13/17. And the TX/RX band is 2400MHz~2483MHz for WLAN. The difference between B890-L66 (FCC ID: QISB882-66 granted data 2012-10-15: IC: 6369A- B88266, Approval date: 2014-02-21) and B882-66 as below: (1) B882-66 delete the USB port interface and corresponding components in schematic. There is no change about RF part. (2) B882-66 delete WCDMA and LTE external antenna ports (3) Enclosure and appearance is different. The followed table shows the different between the 2 Models. So in FCC and IC application for B882-66 FCC ID: QISB882-66, IC: 6369A-B88266 New RF test report for HSPA+/WCDMA /LTE please refer to SYBH(Z-RF) 018032014-2001, and in this new test report only contain the output power and radiated spurious emission test data, other test items please refer to below report of B890-L66 (FCC ID: QISB882-66 granted data 2012-10-15: IC: 6369A-B88266, Approval date: 2014-02-21), the detailed information as below: The WCDMA B2 and LTE B2 test Transmitter Output Power and Field Strength of Spurious Radiation refer to SYBH(Z-RF) 018032014-2001, other refer to SYBH(Z-RF)004092012-2001 of B890-66, and this test report is still effective. The WCDMA B4 and LTE B4 test Transmitter Output Power and Field Strength of Spurious Radiation refer to SYBH(Z-RF) 018032014-2001, other refer to SYBH(Z-RF)004092012-2002 of B890-66, and this test report is still effective. The WCDMA B5 and LTE B5 test Transmitter Output Power and Field Strength of Spurious Radiation, other refer to SYBH(Z-RF)004092012-2003 of B890-66, and this test report is still effective. The LTE B7 test Transmitter Output Power and Field Strength of Spurious Radiation refer to SYBH(Z- RF) 018032014-2001, other refer to SYBH(Z-RF)004092012-2004 of B890-66, and this test report is still effective. The LTE B12 test Transmitter Output Power and Field Strength of Spurious Radiation refer to SYBH(Z-RF) 018032014-2001, other refer to SYBH(Z-RF)004092012-2005 of B890-66, and this test report is still effective. The LTE B13 test Transmitter Output Power and Field Strength of Spurious Radiation refer to SYBH(Z-RF) 018032014-2001, other refer to SYBH(Z-RF)004092012-2006 of B890-66, and this test report is still effective. The LTE B17 test Transmitter Output Power and Field Strength of Spurious Radiation refer to SYBH(Z-RF) 018032014-2001, other refer to SYBH(Z-RF)004092012-2007 of B890-66. and this test report is still effective. The 2.4G wifi test case refer to SYBH(Z-RF)004092012-2008 of B890-66, and this test report is still effective. Test data for Part 15B Unintentional Radiator is refer to new test report “SYBH(Z-EMC)042032014-2”, and this data according to Part 15B and ICES-003 are representative of the compliance of B882-66. New MPE test report SYBH(Z-SAR)031032014-2 had been submitted in this applicable to representative of the SAR compliance of the product with this. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

HUAWEI B882-66 LTE Wireless Gateway SECRET Page 1 Total 5 External Photos of HUAWEI B882-66 LTE Wireless Gateway HUAWEI B882-66 LTE Wireless Gateway SECRET Page 2 Total 5 HUAWEI B882-66 LTE Wireless Gateway SECRET Page 3 Total 5 HUAWEI B882-66 LTE Wireless Gateway SECRET Page 4 Total 5 HUAWEI B882-66 LTE Wireless Gateway SECRET Page 5 Total 5 HUAWEI B882-66 LTE Wireless Gateway SECRET Page 6 Total 5

HUAWEI B882-66 LTE Wireless Gateway SECRET Page1, Total 1 B882-66 ID Label:

HUAWEI B882-66 LTE Wireless Gateway SECRET Page1, Total 1 B882-66 Label location:

HUAWEI B882-66 LTE Wireless Gateway SECRET Page1,Total 6 Photo documentation of interior of product HUAWEI B882-66 LTE Wireless Gateway SECRET Page2,Total 6 HUAWEI B882-66 LTE Wireless Gateway SECRET Page3,Total 6 HUAWEI B882-66 LTE Wireless Gateway SECRET Page4,Total 6 HUAWEI B882-66 LTE Wireless Gateway SECRET Page5,Total 6 HUAWEI B882-66 LTE Wireless Gateway SECRET Page6,Total 6

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC&IC Maximum Permissible Exposure(MPE) Estimation Report Product Name: LTE Wireless Gateway Model: B882-66 Report No.: SYBH(Z-SAR)031032014-2 FCC ID: QISB882-66 IC: 6369A-B88266 APPROVED (Lab Manager) PREPARED (Test Engineer) BY DATE 2014-03-27 2014-03-27 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report NO.: SYBH(Z-SAR)031032014-2 FCC ID:QISB882-66 IC:6369A-B88266 2014-03-27 Page 2 of 18 ※ ※ Modified History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release 2014-03-27 Gong Zhong Report NO.: SYBH(Z-SAR)031032014-2 FCC ID:QISB882-66 IC:6369A-B88266 2014-03-27 Page 3 of 18 Table of Contents 1 EUT Description ................................................................................................................. 5 1.1 General Description ................................................................................................. 6 2 Test specification(s) ............................................................................................................ 7 3 Testing laboratory ............................................................................................................... 7 4 Applicant and Manufacturer ............................................................................................... 7 5 Application details ............................................................................................................... 7 6 Ambient Condition .............................................................................................................. 7 7 RF Exposure Requirements ............................................................................................... 8 8 RF Exposure Evaluation ................................................................................................... 11 8.1 Operation in UMTS Band II ................................................................................... 11 8.2 Operation in UMTS Band IV .................................................................................. 11 8.3 Operation in UMTS Band V ................................................................................... 11 8.4 Operation in LTE Band II ....................................................................................... 12 8.5 Operation in LTE Band IV ..................................................................................... 12 8.6 Operation in LTE Band V ...................................................................................... 12 8.7 Operation in LTE Band VII .................................................................................... 13 8.8 Operation in LTE Band XII .................................................................................... 13 8.9 Operation in LTE Band XIII ................................................................................... 13 8.10 Operation in LTE Band XVII .................................................................................. 14 8.11 Operation in WLAN 2.4G ....................................................................................... 14 9 Exposure calculations for multiple sources ...................................................................... 15 9.1 Estimation for WLAN2.4G MIMO .......................................................................... 16 9.2 Estimation for UMTS Band II & WLAN2.4G .......................................................... 16 9.3 Estimation for UMTS Band IV & WLAN2.4G......................................................... 16 9.4 Estimation for UMTS Band V & WLAN2.4G.......................................................... 16 9.5 Estimation for LTE Band II & WLAN2.4G .............................................................. 17 9.6 Estimation for LTE Band IV & WLAN2.4G ............................................................ 17 Report NO.: SYBH(Z-SAR)031032014-2 FCC ID:QISB882-66 IC:6369A-B88266 2014-03-27 Page 4 of 18 9.7 Estimation for LTE Band V & WLAN2.4G ............................................................. 17 9.8 Estimation for LTE Band VII & WLAN2.4G ........................................................... 17 9.9 Estimation for LTE Band XII & WLAN2.4G ........................................................... 18 9.10 Estimation for LTE Band XIII & WLAN2.4G .......................................................... 18 9.11 Estimation for LTE Band XVII & WLAN2.4G ......................................................... 18 Report NO.: SYBH(Z-SAR)031032014-2 FCC ID:QISB882-66 IC:6369A-B88266 2014-03-27 Page 5 of 18 1 EUT Description Device Information： DUT Name: LTE Wireless Gateway Type Identification: B882-66 Device Type : Mobile device FCC ID: QISB882-66 IC: 6369A-B88266 Device Phase: Identical Prototype Exposure Category: Uncontrolled environment/general population Hardware Version : WL1B890I Software Version : V100R001 Antenna Type : Internal Antenna Device Operating Configurations: Supporting Mode(s) UMTS Band II/IV/V, LTE Band II/IV/V/VII/XII/XIII/XVII,WiFi 2.4G Test Modulation QPSK/16QAM/64QAM/BPSK Operating Frequency Range(s) Band Tx (MHz) Rx (MHz) UMTS Band II 1850-1910 1930-1990 UMTS Band IV 1710-1755 2110-2155 UMTS Band V 824-849 869-894 LTE Band II 1850-1910 1930-1990 LTE Band IV 1710-1755 2110-2155 LTE Band V 824-849 869-894 LTE Band VII 2500-2570 2620-2690 LTE Band XII 699-716 729…

Text truncated - open the document above for the full version.

FCC&IC FCC Test Report Product Name: LTE Wireless Gateway Model Number: B890-66 Report No: SYBH(Z-RF)004092012-2008 FCC ID: QISB890 IC:6369A-B890 Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of B890-66 FCC ID:QISB890 IC: 6369A-B890 Report No: SYBH(Z-RF)004092012-2008 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of B890-66 FCC ID:QISB890 IC: 6369A-B890 Report No: SYBH(Z-RF)004092012-2008 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total37 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Test Item: Aug.24, 2012 Start Date of Test: Aug.27, 2012 End Date of Test: Sept.10, 2012 Test Result: Pass Approved By Senior Engineer Sept.12, 2012 Dai Linjun Date Name Signature Reviewed By Sept.12, 2012 Cousy Xu Date Name Signature Operated By Sept.12, 2012 Huang Qiuliang Date Name Signature FCC Test Report of B890-66 FCC ID:QISB890 IC: 6369A-B890 Report No: SYBH(Z-RF)004092012-2008 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total37 Contents 1 Summary .....................................................................................................................................................6 2 Product Description ...................................................................................................................................8 2.1 PRODUCT INFORMATION .........................................................................................................................8 2.2 MODIFICATION INFORMATION ..................................................................................................................8 2.3 TECHNICAL CHARACTERISTICS ................................................................................................................9 2.4 EUT IDENTIFICATION LIST .....................................................................................................................10 3 Test Site Description ................................................................................................................................11 4 Test Modes ...............................................................................................................................................11 5 Main Test Instruments .............................................................................................................................12 6 Transmitter Measurements .....................................................................................................................13 6.1 BANDWIDTH MEASUREMENT ..................................................................................................................13 6.2 PEAK OUTPUT POWER ..........................................................................................................................17 6.3 BAND EDGE SPURIOUS EMISSION ...........................................................................................................20 6.4 CONDUCTED RF SPURIOUS ...................................................................................................................23 6.5 POWER SPECTRAL DENSITY ..................................................................................................................27 6.6 RADIATED SPURIOUS EMISSION & SPURIOUS IN RESTRICTED BAND ..........................................................30 6.7 CONDUCTED EMISSION AT POWER PORT ...............................................................................................33 7 System Measurement Uncertainty ..........................................................................................................36 8 Appendices ...............................................................................................................................................37 FCC Test Report of B890-66 FCC ID:QISB890 IC: 6369A-B890 Report No: SYBH(Z-RF)004092012-2008 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total37 1 GENERAL INFORMATION 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J (2011) 47 CFR FCC Part 15, Subpart C (2011) IC RSS-Gen (Issue 3, December 2010) IC RSS-210 (Issue 8, December 2010) Test Method: FCC KDB 558074 D01 DTS Meas Guidance v01 FCC KDB 662911 D01 Multiple Transmitter Output v01 1.2 Test Location Test Location 1: Re…

Text truncated - open the document above for the full version.

RF Test Report of B882-66 Photos of Test Setups RF Test Report of B882-66 For WCDMA&LTE 1. Radiated Spurious Emissions Radiated Spurious Emission (below 3GHz) RF Test Report of B882-66 Radiated Spurious Emission (3GHz to18GHz) Radiated Spurious Emission (18GHz to26.5GHz) END