QISBM328C4G Mobile USB Series H

Important Information Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Basic Requirements z During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. z Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair. z Without authorization, no organization or individual is permitted to change the mechanical, safety, or performance design of the device. z When using the device, observe all applicable laws and regulations and respect the legal rights of other people. Environmental Requirements for Using the Device z Before connecting and disconnecting cables, stop using the device, and then disconnect it from the power supply. Ensure that your hands are dry during operation. z Keep the device far from sources of heat and fire, such as a heater or a candle. z Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator. z Place the device on a stable surface. z Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight. Use the device in an area with a temperature ranging from 0°C to 40°C. z During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from sustaining damaged due to lightning strikes. Precautions for Using Wireless Devices z Do not use the device where using wireless devices is prohibited or may cause interference or danger. z The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device. z Do not take the device into operating rooms, intensive care units (ICUs), or coronary care units (CCUs). Areas with Inflammables and Explosives z Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols. z Do not store or transport the device in the same box as inflammable liquids, gases, or explosives. Accessory Requirements Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the performance of the device may be affected, and the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void, or an injury may occur. Safety of Children Keep the device and its accessories out of the reach of children. Otherwise, they may damage the device and its accessories by mistake, or they may swallow the small components of the device, causing suffocation or other dangerous situations. Maintenance z If the device is not used for a long time, power it off, and then remove all the cables connected to it. z If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. z Do not trample, pull, or overbend any cable. Otherwise, the cable may become damaged, causing malfunction of the device. z Before cleaning the device, stop using it, power it off, and then remove all the cables connected to it. z Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or spray to clean the device shell. Traffic Security z Observe local laws and regulations while using the device. To prevent accident…

Text truncated - open the document above for the full version.

For more information go to www.clear.com or please contact Customer Care at 1.888.888.3113. Clear 4G Mobile USB Series H quick start guide 320mm 125mm fold along center line staple locations in red Radius: 13mm non-print colors colorusgeCMYK C:0 M:0 Y:0 K:5 C:57 M:0 Y:100 K:0 C:10 M:0 Y:10 K:50 C:0 M:0 Y:0 K:30 C:100 M:0 Y:0 K:0dimensions staples cutter title clear green watermark logo C:0 M:100 Y:100 K:0 C:0 M:74 Y:0 K:0 page edge indicated in pink 4G USB_Series_H_QSG_cover.ai C:0 M:0 Y: K:60 secondary text C:2 M:0 Y:9 K:36 logo grey subtext

Clear Connection Manager The Clear Connection Manager software must be open to use your Clear 4G Mobile USB Series H. If you would like the software to launch automatically when you start your PC, select “Run App on PC Startup” in the Preferences menu. Windows Clear Connection Manager Mac Clear Connection Manager Guide Contents • Items in the Box • Software Installation Instructions • Windows XP • Windows Vista • Windows 7 • Mac OS X • Connecting the Clear 4G Mobile USB Series H • Clear Connection Manager 320mm 125mm fold along center line staple locations in red Radius: 13mm non-print colors colorusgeCMYK C:0 M:0 Y:0 K:5 C:57 M:0 Y:100 K:0 C:100 M:0 Y:0 K:0dimensions staples cutter clear green watermark logo C:0 M:100 Y:100 K:0 C:0 M:74 Y:0 K:0 page edge indicated in pink 4G USB_Series_H_QSG_p1p10.ai C:0 M:0 Y: K:70 text

Software Installation The software will take a few minutes to install. Windows InstallerMac Installer Insert the Installation USB Insert the Installation USB Flash Drive into an open USB port on your laptop computer. Skip in the guide to the page particular to your operating system: • Windows XP • Windows Vista • Windows 7 • Mac OS X 125mm fold along center line staple locations in red Radius: 13mm 320mm page edge indicated in pink 4G USB_Series_H_QSG_p9p2.ai non-print colors colorusgeCMYK C:0 M:0 Y:0 K:5 C:57 M:0 Y:100 K:0 C:0 M:0 Y:0 K:70 C:100 M:0 Y:0 K:0dimensions staples cutter text clear green watermark logo C:0 M:100 Y:100 K:0 C:0 M:74 Y:0 K:0 C:0 M:0 Y:0 K:10 graphic 1 C:0 M:0 Y:0 K:70 graphic 2 C:0 M:0 Y:0 K:90 graphic 4 C:0 M:0 Y:0 K:80 graphic 3 colorusgeCMYK C:0 M:0 Y:0 K:100 black C:2 M:0 Y:9 K:36 logo grey

Installation for Windows Vista Windows will install the Installation USB Flash Drive as a “Mass Storage Device” and assign a Drive letter (e.g. D:, E:) Note: When Windows assigns a Drive Letter to the Flash Drive you may be prompted to reboot. No reboot is necessary - select “No” if prompted Most users will see an “AutoPlay” dialog box. If so, double click on “Install Clear Connection Manager” Note: If you do not see the “AutoPlay” dialog box go to “My Computer” and double click on “Clear Connection Manager” Double click on the “Windows Users” folder Double click on “Setup.exe” to install the Clear Connection Manager Installation for Windows 7 Windows will install the Installation USB Flash Drive as a “Mass Storage Device” and assign a Drive letter (e.g. D:, E:) Note: When Windows assigns a Drive Letter to the Flash Drive you may be prompted to reboot. No reboot is necessary - select “No” if prompted Most users will see an “AutoPlay” dialog box. If so, double click “Open folder to view files” Note: If you do not see the “AutoPlay” dialog box go to “My Computer” and double click on “Clear Connection Manager” Double click on the “Windows Users” folder Double click on “Setup.exe” to install the Clear Connection Manager 125mm fold along center line staple locations in red Radius: 13mm 320mm 4G USB_Series_H_QSG_p9p2.ai non-print colors colorusgeCMYK C:0 M:0 Y:0 K:5 C:57 M:0 Y:100 K:0 C:0 M:0 Y:0 K:70 C:100 M:0 Y:0 K:0dimensions staples cutter text clear green watermark logo C:0 M:100 Y:100 K:0 C:0 M:74 Y:0 K:0 page edge indicated in pink

Installation for Mac OS X (Leopard 10.5.x or Snow Leopard 10.6.x) Double click on the Installation USB Flash Drive icon that appears on your Desktop Double click on the “Mac OSX Users” folder Double click on “Install CLEAR.mpkg” to launch the Mac Installer Installation for Windows XP Windows will install the Installation USB Flash Drive as a “Mass Storage Device” and assign a Drive letter (e.g. D:, E:) Note: When Windows assigns a Drive Letter to the Flash Drive you may be prompted to reboot. No reboot is necessary - select “No” if prompted Most users will see a “Clear Connection Manager” dialog box. If so, double click on “Install Clear Connection Manager” Note: If you do not see this dialog box go to “My Computer” and double click on “Clear Connection Manager” Double click on the “Windows Users” folder Double click on “Setup.exe” to install the Clear Connection Manager 125mm fold along center line staple locations in red Radius: 13mm page edge indicated in pink 320mm 4G USB_Series_H_QSG_p7p4.ai non-print colors colorusgeCMYK C:0 M:0 Y:0 K:5 C:57 M:0 Y:100 K:0 C:0 M:0 Y:0 K:70 C:100 M:0 Y:0 K:0dimensions staples cutter text clear green watermark logo C:0 M:100 Y:100 K:0 C:0 M:74 Y:0 K:0

Items in the Box Clear 4G Mobile USB Series H Insert the Clear 4G Mobile USB Series H Once the installation is complete, you may remove the Installa- tion USB Flash Drive and insert your Clear 4G Mobile USB Series H. Please store your Flash Drive in a safe place future use. The Clear Connection Manager will recognize the device in a few seconds.* *Right Angle Connector is needed when inserting the Clear USB into a vertical USB slot. Right Angle Connector Installation USB Flash Drive Welcome Letter and Guides 320mm 125mm fold along center line staple locations in red Radius: 13mm page edge indicated in pink 4G USB_Series_H_QSG_p9p2.ai non-print colors colorusgeCMYK C:0 M:0 Y:0 K:5 C:57 M:0 Y:100 K:0 C:0 M:0 Y:0 K:70 C:100 M:0 Y:0 K:0dimensions staples cutter text clear green watermark logo C:0 M:100 Y:100 K:0 C:0 M:74 Y:0 K:0 C:0 M:0 Y:0 K:10 graphic 1 C:0 M:0 Y:0 K:70 graphic 2 C:0 M:0 Y:0 K:90 graphic 4 C:0 M:0 Y:0 K:80 graphic 3 colorusgeCMYK C:0 M:0 Y:0 K:100 black C:2 M:0 Y:9 K:36 logo grey

Declaration for WiMAX Signal Parameter Huawei Technologies Co., Ltd.1 Declaration for WiMAX Signal Parameter I/We Huawei Technologies Co., LTD Of Huawei Industrial Base, Bantian Longgang, Shenzhen 518129 P.R.China Hereby declare that the WiMAX Signal Parameter we provided is compliant with the following telecommunication equipment: FCC ID : QISBM328C Model Name 1 : BM328c Model Name 2 : FWH-USB0328 Product Name : 4G Mobile USB Series H Its maximum ratio of DL:UL is 29:18, it can’t support the higher ratio than 29:18, like 26:21; its UL Zone type is PUSC not AMC, it can’t support Band AMC. Person responsible for making this declaration Name, Surname : Ms. Kang Ying Shenzhen 2010-04-27 (Place) (Date) (Company stamp and legal signature)

DoC declaration 2010-5-27 Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian Longgang, Shenzhen 518129 P.R.China Date: May 27, 2010 Subject: DoC declaration To Whom it may concern, We, as the grantee of this project FCC ID:QISBM328C, would like to declare that the composite portion catagorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Regards, Name: Zhang Xinghai Title: EMC Laboratory Manager Tel: +86-755-89650252 E-mail: +86-755-89652518 Date: May 27, 2010

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: Compliance Certification Services Inc. Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISBM328C to be kept confidential: 1. Schematic diagram 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2010-05-27 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISBM328C Product Name: 4G Mobile USB Series H Product Model: BM328c/FWH-USB0328 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to Compliance Certification Services Inc. should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify Compliance Certification Services Inc. with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify Compliance Certification Services Inc. in the event the information regarding the product of the product is made available to the public Compliance Certification Services Inc. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705.

Huawei Technologies Co., Ltd. March . 26, 2010 FCC ID：QISBM328C Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Compliance Certification Services Inc. Address: No.10-1 Mingkeda Logistics Park. No.18 Huanguan South RD. Guanlan Town, Baoan District Shenzhen China Name: Selina.Liu Job Title: Sales Engineer Email: [email protected] I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: Model 1: HUAWEI / BM328c Model 2: HUAWEI / FWH-USB0328 FCC ID: QISBM328C Product Name: 4G Mobile USB Series H Signature Name/Title: Zhang Xinghai/ EMC Laboratory Manager Company Name: Huawei Technologies Co., Ltd. Address: Huawei Industrial Base, Bantian, Longgang ,Shenzhen 518129, P.R. China TEL: +86-755-89650252 FAX: +86-755-89652518 Email: [email protected]

FCC ID: QISBM328C External Photos 2010-5-27 Page1, Total6 Photo Documentation of External of Product FCC ID: QISBM328C External Photos 2010-5-27 Page2, Total6 FCC ID: QISBM328C External Photos 2010-5-27 Page3, Total6 FCC ID: QISBM328C External Photos 2010-5-27 Page4, Total6 FCC ID: QISBM328C External Photos 2010-5-27 Page5, Total6 FCC ID: QISBM328C External Photos 2010-5-27 Page6, Total6

FCC ID:QISBM328C Label 2010-5-28 Page1, Total1 Label 1 for Model BM328c: Label 2 for Model FWH-USB0328:

FCC ID:QISBM328C Label location 2010-5-28 Page1, Totla1 Label location for Model BM328c: Label location for Model FWH-USB0328:

FCC ID: QISBM328C Internal Photos 2010-5-27 Page1, Total3 Photo Documentation of Interior of Product FCC ID: QISBM328C Internal Photos 2010-5-27 Page2, Total3 FCC ID: QISBM328C Internal Photos 2010-5-27 Page3, Total3

No. 2010EEE00967 Page 2 of 151 TABLE OF CONTENT 1 TEST LABORATORY..................................................................................................................3 1.1 TESTING LOCATION........................................................................................................................................ 3 1.2 TESTING ENVIRONMENT................................................................................................................................. 3 1.3 PROJECT DATA............................................................................................................................................... 3 1.4 SIGNATURE..................................................................................................................................................... 3 2 CLIENT INFORMATION..............................................................................................................4 2.1 APPLICANT INFORMATION.............................................................................................................................. 4 2.2 MANUFACTURER INFORMATION..................................................................................................................... 4 3 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................5 3.1 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST.......................................................................... 5 3.2 ABOUT EUT ................................................................................................................................................... 5 3.2.1 TEST SETUP, PROTOCOL SIMULATOR........................................................................................................... 7 3.2.2 SCALING FACTOR........................................................................................................................................ 9 3.2.3 CONDUCTED POWER AND PAR .................................................................................................................. 11 3.2.4 DUTY CYCLE............................................................................................................................................. 17 3.2.5 DESCRIPTION OF ANTENNA LOCATION...................................................................................................... 23 3.2.6 SAR, POWER LINEARITY PLOT............................................................................................................... 23 3.2.7 WORST ORIENTATION DETERMINATION..................................................................................................... 28 4 CHARACTERISTICS OF THE TEST ........................................................................................28 4.1 APPLICABLE LIMIT REGULATIONS................................................................................................................ 28 4.2 APPLICABLE MEASUREMENT STANDARDS.................................................................................................... 28 5 OPERATIONAL CONDITIONS DURING TEST ........................................................................29 5.1 SCHEMATIC TEST CONFIGURATION............................................................................................................... 29 5.2 SAR MEASUREMENT SET-UP........................................................................................................................ 30 5.3 DASY4 E-FIELD PROBE SYSTEM................................................................................................................... 31 5.4 E-FIELD PROBE CALIBRATION...................................................................................................................... 32 5.5 OTHER TEST EQUIPMENT............................................................................................................................. 33 5.6 EQUIVALENT TISSUES................................................................................................................................... 33 5.7 SYSTEM SPECIFICATIONS.............................................................................................................................. 34 6 TEST RESULTS ........................................................................................................................34 6.1 DIELECTRIC PERFORMANCE......................................................................................................................... 34 6.2 SYSTEM VALIDATION.................................................................................................................................... 35 6.3 SUMMARY OF MEASUREMENT RESULTS....................................................................................................... 36 6.4 ENHANCED ENERGY COUPLING AT INCREASED SEPARATION DISTANCES........................................................ 39 6.5 CONCLUSION................................................................................................................................................ 39 7 MEASUREMENT UNCERTAINTY ............................................................................................40 7.1 SYSTEM VALIDATION UNCERTAINTIES.......................................................................................................... 40 7.2 MEASUREMENT SAR PROCEDURE UNCERTAINTIES..................................................................................... 41 8 MAIN TEST INSTRUMENTS ....................................................................................................43 9 INFORMATION ON THE TESTING LABORATORIES .............................................................44 ANNEX A MEASUREMENT PROCESS....................................................................................45 ANNEX B TEST LAYOUT ............................................................................................…

Text truncated - open the document above for the full version.

Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total178 Appendix A Modulation Characteristic Measurement According to FCC part 2.1047 and part 27 subpart C Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total178 1. Channel Bandwidth = 5 MHz 1) TM 1 B Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.4985 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:12.1 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -1.001.00 -1.00 1.00 Mk r 1 : Q0.0331 @ I-1.4005 1 PO Date: 20.JAN.2010 16:08:45 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total178 M Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.593 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.7 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -1.001.00 -1.00 1.00 Mk r 1 : Q-0.0223@ I1.3891 1 PO Date: 20.JAN.2010 16:17:04 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total178 T Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.6875 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.2 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -1.001.00 -1.00 1.00 Mk r 1 : Q-0.0276@ I1.4046 1 PO Date: 20.JAN.2010 16:26:35 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total178 2) TM 2 B Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.4985 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.9 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -1.001.00 -1.00 1.00 Mk r 1 : Q0.0354 @ I1.4171 1 PO Date: 20.JAN.2010 16:10:16 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total178 M Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.593 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.3 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -1.001.00 -1.00 1.00 Mk r 1 : Q-0.0036@ I1.4039 1 PO Date: 20.JAN.2010 16:18:23 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page7, Total178 T Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.6875 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.2 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -1.001.00 -1.00 1.00 Mk r 1 : Q0.0041 @ I-1.3989 1 PO Date: 20.JAN.2010 16:25:57 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page8, Total178 3) TM 3 B Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.4985 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.9 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -3.003.00 -3.00 3.00 Mk r 1 : Q0.0868@ I-3.1992 1 PO Date: 20.JAN.2010 16:12:47 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page9, Total178 M Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.593 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:10.4 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -3.003.00 -3.00 3.00 Mk r 1 : Q0.0086@ I3.0974 1 PO Date: 20.JAN.2010 16:19:34 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page10, Total178 T Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.6875 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:10.4 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -3.003.00 -3.00 3.00 Mk r 1 : Q0.0338@ I-3.1293 1 PO Date: 20.JAN.2010 16:24:10 Appendix_FCC Test Report FCC ID:QISBM328C Security Level: Public Report No: SYBHZ (R) E040022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page11, Total178 4) TM 4 B Measurement C omplete IEEE 802.16e-2005 OFDMA Frequency/Fs :2.4985 GHz/5.6 MHzSignal Lvl. Setting/Ext. A tt:11.9 dBm/11.6 dBCapture Time/No.Samples:2.3 ms/12881 Seg=0, UL-PUSC, ID=A 1/1 (1)Meas Setup:1TX x1RXZone O ffs et / Len:0 / 15 Symbols SINGLETRG:POWER RF BC onstellation vs Symbol -3.003.00 -3.00 3.00 Mk r 1 : Q-0.0693@ I3.2345 1 PO Date: 20.J…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: 4G Mobile USB Series H Model Number 1: BM328c Model Number 2: FWH-USB0328 Report No: SYBHZ…

Text truncated - open the document above for the full version.