QISBTS3202E-AWSMicro BTS

BTS3202E Compliance and Safety Manual Issue 02 Date 2012-04-30 HUAWEI TECHNOLOGIES CO., LTD. Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd i Copyright © Huawei Technologies Co., Ltd. 2012 All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] BTS3202E Compliance and Safety Manual Contents Issue 02 (2012-04-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd ii Contents Figures ...................................................................................................................................................... v Tables ......................................................................................................................................................vi About This Document ...................................................................................................................... vii 1 Regulatory Compliance Statement............................................................................................. 1-1 1.1 About This Chapter ....................................................................................................................................... 1-1 1.2 European Community CE Certification DoC ................................................................................................ 1-2 2 Regulatory Compliance Information......................................................................................... 2-1 2.1 About This Chapter ....................................................................................................................................... 2-1 2.2 Regulatory Compliance Standards ................................................................................................................ 2-1 2.3 European Directives Compliance .................................................................................................................. 2-4 2.4 USA Regulatory Compliance ........................................................................................................................ 2-6 2.4.1 FCC Part 15 .......................................................................................................................................... 2-6 2.5 Japanese Compliance .................................................................................................................................... 2-7 2.5.1 VCCI .................................................................................................................................................... 2-7 2.5.2 JATE ..................................................................................................................................................... 2-7 2.6 CISPR 22 Compliance .................................................................................................................................. 2-7 3 Safety Information.......................................................................................................................... 3-1 3.1 About This Chapter ....................................................................................................................................... 3-1 3.2 Overview ....................................................................................................................................................... 3-1 3.2.1 Safety Precautions ................................................................................................................................ 3-1 3.2.2 General Requirements .......................................................................................................................... 3-2 3.3 Electricity Safety ........................................................................................................................................... 3-3 3.3.1 High Voltage......................................................................................................................................... 3-3 3.3.2 Thunderstorm ....................................................................................................................................... 3-4 3.3.3 Tools ..................................................................................................................................................... 3-4 3.3.4 High Electrical Leakage ....................................................................................................................... 3-4 3.3.5 Power Cable ......................................................................................................................................... 3-4 3.3.6 Fuse ......................…

Text truncated - open the document above for the full version.

BTS3202E LTE V100R004C00 Hardware Description IssueDraft A Date2011-07-30 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Purpose This document provides reference for planning and deploying an BTS3202E. It presents the exterior and describes the ports, functions, cable types, connector specifications, and cable connections of the BTS3202E. Product Version The following table lists the product version related to this document. Product Name Product Version BTS3202E LTE (referred to as the BTS3202E in this document) V100R004C00 Intended Audience This document is intended for: lBase station installation engineers lSystem engineers lSite maintenance engineers Organization 1 Changes in the BTS3202E LTE Hardware Description This chapter describes the changes in the BTS3202E LTE Hardware Description. 2 BTS3202E Overview This chapter presents the BTS3202E exterior and describes the ports and indicators on the BTS3202E. 3 BTS3202E Cables BTS3202E LTE Hardware DescriptionAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii This chapter provides BTS3202E cable exteriors and describes the pin assignments for the wires of the cables and installation positions for the cables. 4 BTS3202E Auxiliary Devices This chapter describes the BTS3202E auxiliary devices. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. SymbolDescription Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. General Conventions The general conventions that may be found in this document are defined as follows. Convention Description Times New RomanNormal paragraphs are in Times New Roman. BoldfaceNames of files, directories, folders, and users are in boldface. For example, log in as user root. ItalicBook titles are in italics. Courier New Examples of information displayed on the screen are in Courier New. Command Conventions The command conventions that may be found in this document are defined as follows. BTS3202E LTE Hardware DescriptionAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii ConventionDescription BoldfaceThe keywords of a command line are in boldface. ItalicCommand arguments are in italics. [ ]Items (keywords or arguments) in brackets [ ] are optional. { x | y | ... }Optional items are grouped in braces and separated by vertical bars. One item is selected. [ x | y | ... ]Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. { x | y | ... } * Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. [ x | y | ... ] * Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected. GUI Conventions The GUI conventions that may be found in this document are defined as follows. Convention Description BoldfaceButtons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. >Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder. Keyboard Operations The keyboard operations that may be found in this document are defined as follows. Format Description KeyPress the key. For example, press Enter and press Tab. Key 1+Key 2Press the keys concurrently. For example, pressing Ctrl+Alt +A means the three keys should be pressed concurrently. Key 1, Key 2Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn. Mouse Operations The mouse operations that may be found in this document are defined as follows. BTS3202E LTE Hardware DescriptionAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iv ActionDescription ClickSelect and release the primary mouse button without moving the pointer. Double-clickPress the pr…

Text truncated - open the document above for the full version.

BTS3202E LTE V100R004C00 Installation Guide IssueDraft A Date2011-07-30 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Purpose This document describes the procedures for installing a BTS3202E in different scenarios. It also provides checklists for hardware installation. Product Version The following table lists the product version related to this document. Product Name Product Version BTS3202E LTE (referred to as the BTS3202E in this document) V100R004C00 Intended Audience This document is intended for: lBase station installation engineers Organization 1 Changes in the BTS3202E LTE Installation Guide This chapter describes the changes in the BTS3202E LTE Installation Guide. 2 Installation Preparations This chapter describes instrument preparations, and skills and qualifications that installation engineers must possess. 3 Information About the Installation This chapter describes the information that you must be familiar with before installing a BTS3202E, including the BTS3202E exterior, ports, installation options, physical supports, and installation clearance requirements. 4 Unpacking the Equipment BTS3202E LTE Installation GuideAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii Unpack and check the delivered equipment to ensure that all the materials are included and intact. 5 Obtaining the ESN The Electronic Serial Number (ESN) is a unique identifier of a Network Element (NE). Record the ESN for later commissioning of the base station before installation. 6 Installation Process The BTS3902E installation process involves installing a BTS3902E and related cables, checking the BTS3902E hardware installation, and powering on the BTS3902E. 7 Installing a BTS3902E This section describes the procedures for installing a BTS3902E. The BTS3902E can be installed on a pole, wall, or wood pole depending on the installation environment. 8 Installing an AC Surge Protection Box and Related Cables This chapter describes the dimensions, installation clearance requirements, and installation options of an AC surge protection box. It also describes the procedure for installing the surge protection box. An AC surge protection box can be configured when a BTS3202E is installed outdoors. 9 Installing Cables This chapter describes the procedure and precautions for installing the PGND cables, power cables, and transmission cables for a BTS3902E in various scenarios. Based on actual requirements, and it also describes how to install an optional monitoring signal cable as required. 10 Installing the Housing This chapter describes the procedures for installing the upper housing and optional camouflage shell for a BTS3202E after the BTS3202E and related cables are installed. 11 Checking the BTS3202E Hardware Installation This chapter describes how to check the hardware installation after a BTS3202E is installed. 12 Performing a Power-On Check on the BTS3202E This chapter describes the procedure for performing a power-on check on the BTS3202E. 13 Appendix This section describes the procedure for adding an easy power receptacle (pressfit type) connector.This section describes the procedure for adding OT terminals.This section describes the procedure for adding OT terminals to the surge protection box side of the power cable for the AC surge protection box. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. BTS3202E LTE Installation GuideAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii SymbolDescription Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. General Conventions The general conventions that may be found in this document are defined as follows. Convention Description Times New RomanNormal paragraphs are in Times New Roman. BoldfaceNames of files, directories, folders, and users are in boldface. For example, log in as user root. ItalicBook titles are in …

Text truncated - open the document above for the full version.

BTS3202E LTE V100R004C00 Site Maintenance Guide IssueDraft A Date2011-07-30 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Purpose This document describes routine maintenance procedures for the BTS3202E, such as equipment maintenance and power-on and power-off operations. It also describes how to replace the BTS3202E and optical modules. Product Version The following table lists the product version related to this document. Product Name Product Version BTS3202E LTE (referred to as the BTS3202E in this document) V100R004C00 Intended Audience This document is intended for: lSystem engineers lSite maintenance engineers Organization 1 Changes in the BTS3202E LTE Site Maintenance Guide This chapter describes the changes in the BTS3202E LTE Site Maintenance Guide. 2 Powering On and Powering Off a BTS3202E After a BTS3202E is powered on, check the status of the indicators on the BTS3202E. When you power it off, you can perform normal power-off. 3 Replacing a BTS3202E The BTS3202E is an integrated micro eNodeB. If a BTS3202E is faulty, you must replace it within a short period. Replacing a BTS3202E interrupts all the services carried by the eNodeB. BTS3202E LTE Site Maintenance GuideAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii 4 Replacing an Optical Module An optical module implements optical-electrical conversion, enabling optical transmission between a BTS3202E and other devices. You must disconnect the fiber optic cable from an optical module before replacing the optical module. Disconnecting the fiber optic cable interrupts the transmission of optical signals. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. SymbolDescription Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. General Conventions The general conventions that may be found in this document are defined as follows. Convention Description Times New RomanNormal paragraphs are in Times New Roman. BoldfaceNames of files, directories, folders, and users are in boldface. For example, log in as user root. ItalicBook titles are in italics. Courier New Examples of information displayed on the screen are in Courier New. Command Conventions The command conventions that may be found in this document are defined as follows. BTS3202E LTE Site Maintenance GuideAbout This Document Issue Draft A (2011-07-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii ConventionDescription BoldfaceThe keywords of a command line are in boldface. ItalicCommand arguments are in italics. [ ]Items (keywords or arguments) in brackets [ ] are optional. { x | y | ... }Optional items are grouped in braces and separated by vertical bars. One item is selected. [ x | y | ... ]Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. { x | y | ... } * Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. [ x | y | ... ] * Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected. GUI Conventions The GUI conventions that may be found in this document are defined as follows. Convention Description BoldfaceButtons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. >Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder. Keyboard Operations The keyboard operations that may be found in this document are defined as follows. Format Description KeyPress the key. For example, press Enter and press Tab. Key 1+Key 2Press the keys concurrently. For example, pressing Ctrl+Alt +A means the three keys should be pressed concurrently. Key 1, Key 2Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn. Mouse Operations The mouse operations that may…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2012-04-26 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISBTS3202E-AWS To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Ÿ Schematic diagram Ÿ Block Diagram Ÿ Parts list (BOM) Information Ÿ Operational description Ÿ Tune-up procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing for 180 days after the date the grant of equipment authorization is issued: Ÿ External Photos Ÿ Internal Photos Ÿ Test Setup Photos Ÿ Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

Photo documentation of External of BTS3202E Secret Photo documentation of External of BTS3202E EXTERNAL Photographps (Total 5 Pages including this Cover Page) Supplement filename Descriplion Photo-01 External Rear view - Top Photo-02 External Rear view - Top(with antenna) Photo-03 External Rear view - Bottom Photo-04 External Rear view - Front(with interface cover) Photo-05 External Rear view - Front Photo-06 External Rear view - Back Photo-07 External Rear view - Left Photo-08 External Rear view - Right Photo documentation of External of BTS3202E Secret Photo-01 External view – Top Photo-02 External view – Top（with antenna） Photo documentation of External of BTS3202E Secret Photo-03 External view – Bottom Photo-04 External view – Front(with interface cover) Photo documentation of External of BTS3202E Secret Photo-05 External view – Front Photo-06 External view – Back Photo documentation of External of BTS3202E Secret Photo-07 External view – Left Photo-08 External view – Right

Photo documentation of Internal of BTS3202E Secret Photo documentation of Internal of BTS3202E Internal Photographps (Total 7 Pages including this Cover Page) Supplement filename Descriplion Photo-01 Internal View -Digital Unit Photo-02 Internal View - Baseband Board（top） Photo-03 Internal View - Baseband Board（bottom） Photo-04 Internal View - Power Board with “GYE” Log （external） Photo-05 Internal View - Power Board with “GYE” Log （internal） Photo-06 Internal View - Power Board with “VAPEL” Log（external） Photo-07 Internal View - Power Board with “VAPEL” Log（internal） Photo-08 Internal View - Radio Unit Photo-09 Internal View - Radio Board（top） Photo-10 Internal View - Radio Board（bottom） Photo-11 Internal View - Remove Radio Board Photo documentation of Internal of BTS3202E Secret Photo-01 Internal View -Digital Unit Photo-02 Internal View - Baseband Board（ （（ （top） ）） ）

Photo documentation of Internal of BTS3202E Secret Photo-03 Internal View - Baseband Board（ （（ （bottom） ）） ） Photo-04 Internal View - Power Board with "GYE" Log（ （（ （external） ）） ） Photo documentation of Internal of BTS3202E Secret Photo-05 Internal View - Power Board with "GYE" Log（ （（ （internal） ）） ） Photo-06 Internal View - Power Board with "VAPEL" Log（ （（ （external） ）） ）

Photo documentation of Internal of BTS3202E Secret Photo-07 Internal View - Power Board with "VAPEL" Log（ （（ （internal） ）） ） Photo-08 Internal View - Radio Unit Photo documentation of Internal of BTS3202E Secret Photo-09 Internal View - Radio Board（ （（ （top） ）） ） Photo-10 Internal View - Radio Board（ （（ （bottom） ）） ） Photo documentation of Internal of BTS3202E Secret Photo-11 Internal View - Remove Radio Board

FCC Electromagnetic Field Health Compliance Report Product Name: Micro BTS Product Model: BTS3202E LTE Report Number: SYBH(R)031042012EB-2 FCC ID: QISBTS3202E-AWS Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Electromagnetic Field Health Compliance Report of BTS3202E LTE V100R005 FCC ID: QISBTS3202E-AWS Security Level: Public Report No: SYBH(R)031042012EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 14 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1 and 6369A-3. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers of test site No.1 are R-2364, G-415, C-2583, and T-256, and the accreditation numbers of test site No.2 are R-3760, G…

Text truncated - open the document above for the full version.