QISBTS3911BPico BTS

Huawei Technologies Co.,Ltd

Click to zoom

Application Details

Equipment Class: PCB - PCS Licensed Transmitter
Date of Grant: Jul 20, 2015
Application Purpose: Original Equipment
Date of Application: Jul 20, 2015
Equipment Note: Pico BTS
Frequency Range: 1940.00000000 - 1980.00000000
Company: Huawei Technologies Co.,Ltd
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

BTS3911BBTS3911B V100R010C10 Installation Guide Issue: Draft A Date: 2015-01-20 HUAWEI TECHNOLOGIES CO., LTD. Installation Tools RubberUtility knife Marker Cable cutter Wire s Diagonal pliers ESD gloves Torque wr e size: 1 Protective gloves - Hammer drill (Ø6, Ø8 or Ø12 bore) Ladder Vacuu m Measuring tape Torque wrench for SMA connectors 2 r mallet Socket wrench (M6) Level tripperRJ11 crimping toolPower cable crimping tool ench (bore 0 mm) Phillips torque screwdriver crown saw (Ø60 bore) (M4 to M6) -- Network cable tester m cleaner Multimeter 2 Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. BTS3911B Product Introduction Appearance Dime The BTS3911B uses internal antennas. b Port Ports Port Micro Mini U RGPS P&E PSE Appearance and Dimensions Port Port - DAT A PoE 3 ensions Description Description SDAnchor slot for the Micro SD card used for deployment USBPort for clock output SPort for clock synchronization Port for transmission and power supply Description Description Power port that supplies power to the PSE AData input port that connects to transmission equipment of an operator PoE output port that connects to the BTS3911B 3 Installation Scenarios Wall-mounted Installation •The wall must have a bearing capacity of at leThe wall must have a bearing capacity of at le •The screws must be torqued to 1.5 N·m and •The thickness of the wall must be less than th through an existing plate. •If the wall is too thick, use a customer-provide zBy drilling holeszThrough an existin Ceiling-mounted Installation •The ceiling (such as concrete ceiling) must ha weight of the BTS3911B. zBy drilling holeszThrough an •The screws must be torqued to 1.5 N·m and w •The thickness of the ceiling must be less than through an existing plate. Keel-mounted Installation The BTS3911B can be installed on a U-shaped, ddi it i tThfllifidepending on site requirements. The following fig ceiling. 4 east four times the weight of the BTS3911B.east four times the weight of the BTS3911B. work properly without causing cracks on the wall. he bolt length (45 mm) to allow for installation ed installation plate. ng plate zBy using a customer- provided installation plate ave a bearing capacity of at least four times the n existing plate zBy using a keel work properly without causing cracks on the wall. n the bolt length (45 mm) to allow for installation T-shaped, H-shaped, or other shaped keel, ill t tkltdi tlltigure illustrates keel-mounted installation on a 4 Clearance Requirements zFor a BTS3911B Installation Environment Requirements Operating Environment Requirementsg SpecificationsRequirements Operating temperature-5 ºC to +40ºC Relative humidity5% RH to 95% RH Altitude -60 m to +1800 m 1800 mto 4000 m •The BTS3911B cannot be installed near air c appliances. •The BTS3911B cannot be installed near a str Other Requirements 1800 mto 4000 m •The BTS3911B cannot be installed near plac outdoor air conditioner units, water pipes, pip runoff. •The installation must be protected against ra i where the BTS3911B is installed. •The installation position must be far away fr o flammable or explosive substances, and elecp, •The BTS3911B must be installed in a dry, we •If the BTS3911B is installed in parking areas well ventilated. 5 zFor a PSE s Remarks - - The BTS3911B works properly under the condition. From the altitude of 1,800 m, the maximum operating temperature drops by 1ºCeach time the altitude increases by conditioner outlet or near other heat-generating rong heat source of any kind. temperature drops by 1C each time the altitude increases by 220 m. gy ces where water may leak or drip, such as near pelines, and roofs with water leaks or dripping in. No window exists at either side of the wall om high voltage, highly corrosive devices, ctromagnetic interference.g ell-ventilated, and dustproof place. or basements, the installation position must be 5 Installation Process Remove the backup ESN label from the BTS3911 Before installation, record the ESN, which will b the backup ESN label, photograph it. Obtaining the ESN Record the ESN by following instructions providedRecord the ESN by following instructions provided commissioning personnel. Keep the backup ESN 6 B packing box. be used during commissioning. Before removing d in Appendix 3 and report the ESN to the BTS3911Bd in Appendix 3 and report the ESN to the BTS3911B label secure. 6 BTS3911B can be installed on a wall or ceiling d Installing a BTS3911B zWall- or ceiling-mounted installation (1) Mounting bracket (2) Screws (M3.5X35) Mounting Kits (3) Plastic expansion sleeve (4) Flat washer Installing a BTS3911B on a Wall Drill holes and install plastic expansion sleeves In Mark anchor points (1) Wall (2) Mounting bracket (3) Anchor points Installing a BTS3911B on a Ceiling Drill holes and install plastic expansion sleeves Mark anchor points Installing a BTS3911B on a Ceiling (1) Wall (2) Mounting bracket (3) Anchor points 7 irectly or by using a plate or keel. zInstallation on a plate or keel (1) Mounting bracket (2) V clamp (3) Bolt (M4X35)(3) Bolt (M4X35) (4) Bolt (M4X36) stall mounting kitsInstall the BTS3911B on the wall Install mounting kits Install the BTS3911B on the ceiling 7 Install mou Mark anchor points Installing a BTS3911B on a Plate On a ceiling plate (for example, daughter board (1) Plate (2) Mounting bracket (3) Anchor points Use a hammer drill with Ф6 bore to drill holes On a ceiling plate (for example gypsum board) Partially install m Use a crown saw to drill a hole (diameter: 60-65 mm) On a ceiling plate (for example, gypsum board) Stikit t thilil tSecure mounting kits to the ceiling plate 8 nting kitsInstall the BTS3911B on the ilil t on the ceiling) capable of being screwed ceiling plate incapable of being screwed mounting kits Lead the U-shaped metal plate through the hole on the ceiling incapable of being screwed I t ll th BTS3911Bthilil tInstall the BTS3911B on the ceiling plate 8 Install moun Mark anchor points Installing a BTS3911B on a K…

Text truncated - open the document above for the full version.

Cover Letter(s)

QA-FR-170-B Huawei Technologies Co., Ltd. ADD: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, China TEL: +86-755-2897-0299 FAX: +86-755-8965-0226 FCC Authorization Date: 2015-5-18 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Huawei Technologies Co., Ltd., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Zhang, Xinghai EMC Laboratory Manager Tel: +86-755-2897-0299 Email:[email protected] Add: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, China

Cover Letter(s)

QA- FR-172-A Huawei Technologies Co., Ltd. Add: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District,Shenzhen, 518129, China Tel: +86-755-2897-0299 Fax: +86-755-8965-0226 FCC Confidential Authorization Date: 2015-5-18 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: QISBTS3911B In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Huawei Technologies Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description As well as short-term confidential treatment of information accompanying this application as outlined below:  Internal Photos  User’s Manual  External Photos  Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Zhang, Xinghai EMC Laboratory Manager Tel: +86-755-2897-0299 Email:[email protected] Add: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, China  Part list /Tune up Procedure

External Photos

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – All View EUT –Top View EUT –Bottom View EUT – Side View EUT –Side View EUT – Port View EUT –Adapter Top View EUT –Adapter Bottom View EUT –Adapter Label View

ID Label/Location Info

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label Here

Internal Photos

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT –Uncover View EUT –Uncover And LTE Antenna Remover View Wifi antenna LTE/WCDMA antenna EUT –Uncover View EUT –Uncover View EUT –Uncover View EUT –WLAN Board Top View EUT –WLAN Board Bottom View EUT –WLAN Chip View EUT –WLAN Chip View EUT – WLAN Circuit View EUT – Main Board Top View EUT – Main Board Bottom View EUT – Main Chip View EUT – Main Chip View EUT –RF Circuit View EUT –WLAN Antenna View

RF Exposure Info

Declaration for Compliance with EMF for BTS3911B Security Level: Public Document No.: SYBH(R) 01787709EB-3 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 4 Declaration of Electromagnetic Field Health Compliance To whom it may concern, As to the product BTS3911B made by Huawei Technologies Co., Ltd., we declare that it complies with the Basic restrictions/Reference levels for electric, magnetic and electromagnetic fields as specified in following standards(s): Nr. Standard 1 47CFR FCC Part 1 & OET Bulletin 65 The compliance is demonstrated based on the following calculation model assessment: 1. The power density according to far-field model is: 2 ),( 4R GP S      Where: P = input power of the antenna. G = antenna gain relative to an isotropic antenna. , = elevation and azimuth angles. R = distance from the antenna to the point of investigation. 2. For single or multiple RF sources, the calculated power density should comply with following: 1 ,   i iLimit i S S Where: i S = the power density when the f is i . iLimit S , = the reference level requirement for power density when f is i . 3. The calculation of the power density or safe distance is: NOTE 1: The RF exposure evaluation is base on the far-field and the radiation exposure is over-estimated. NOTE 2: The maximum output power level is taken into account as a worst case for the purpose of the calculation of power density or safe distance. NOTE 3: The minimum antenna feed cable loss (assumed no cable loss) is taken into account as a worst case for the purpose of the calculation of power density or safe distance. NOTE 4: The maximum antenna radiation exposure orientation and maximum antenna gain is taken into account as a worst case for the purpose of the calculation of power density or safe distance. Wifi 2.4G: RF Source Calculation for Individual Source RF Source #1 f = 2400 to 2483.5 MHz Declaration for Compliance with EMF for BTS3911B Security Level: Public Document No.: SYBH(R) 01787709EB-3 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 4 iLimit S , = 10 2 W /m P , ),( G = EIRP (= ),( GP ): EIRP (*) = W (= dBm, all ports) ),( GP : P (*) = 0.214 W (=23.3 dBm) (three ports, total rated power: 20.8dBm, tolerance: +/-2.5dB) W (calculated, two ports) ),( G = 3.162 (=5 dBi) (Integrated antenna) _______________________ (*) : The value is from: measured max (See relevant RF report), rated + declared tolerance, max allowed by RF standard. And, the transmission duty cycle is: ignored, used, that is: 100 %. , = The worst condition is considered, i.e. the max G is used. i S = 2 ),( / 4 R GP     = 0.054 2 /R 2 W/m iLimit i S S , = 0.0054 / 2 R Wifi 5G: RF Source Calculation for Individual Source RF Source #1 f = 5150 to 5850 MHz iLimit S , = 10 2 W /m P , ),( G = EIRP (= ),( GP ): EIRP (*) = W (= dBm, all ports) ),( GP : P (*) = 0.214 W (=23.3 dBm) (three ports, total rated power: 20.8dBm, tolerance: +/-2.5dB) W (calculated, two ports) ),( G = 7.943 (=9 dBi) (Integrated antenna) _______________________ (*) : The value is from: Declaration for Compliance with EMF for BTS3911B Security Level: Public Document No.: SYBH(R) 01787709EB-3 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 4 measured max (See relevant RF report), rated + declared tolerance, max allowed by RF standard. And, the transmission duty cycle is: ignored, used, that is: 100 %. , = The worst condition is considered, i.e. the max G is used. i S = 2 ),( / 4 R GP     = 0.135 2 /R 2 W/m iLimit i S S , = 0.0135 / 2 R AWS Band: RF Source Calculation for Individual Source RF Source #1 f = 2110 to 2155 MHz iLimit S , = 10 2 W /m P , ),( G = EIRP (= ),( GP ): EIRP (*) = W (= dBm, all ports) ),( GP : P (*) = 0.447 W (=26.5 dBm) (two ports, total rated power: 24dBm, tolerance: +/-2.5dB) W (calculated, two ports) ),( G = 1.995 (=3 dBi) (Integrated antenna) _______________________ (*) : The value is from: measured max (See relevant RF report), rated + declared tolerance, max allowed by RF standard. And, the transmission duty cycle is: ignored, used, that is: 100 %. , = The worst condition is considered, i.e. the max G is used. i S = 2 ),( / 4 R GP     = 0.071 2 /R 2 W/m iLimit i S S , = 0.0071 / 2 R PCS Band: RF Source Calculation for Individual Source RF Source #1 f = 1930 to 1990 MHz Declaration for Compliance with EMF for BTS3911B Security Level: Public Document No.: SYBH(R) 01787709EB-3 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 4 iLimit S , = 10 2 W /m P , ),( G = EIRP (= ),( GP ): EIRP (*) = W (= dBm, all ports) ),( GP : P (*) = 0.447 W (=26.5 dBm) (two ports, total rated power: 24dBm, tolerance: +/-2.5dB) W (calculated, two ports) ),( G = 1.995 (=3 dBi) (Integrated antenna) _______________________ (*) : The value is from: measured max (See relevant RF report), rated + declared tolerance, max allowed by RF standard. And, the transmission duty cycle is: ignored, used, that is: 100 %. , = The worst condition is considered, i.e. the max G is used. i S = 2 ),( / 4 R GP     = 0.071 2 /R 2 W/m iLimit i S S , = 0.0071 / 2 R Whole Product Calculation for Whole Product Whole Product  i iLimit i S S , = 0.0331 / 1 2 R R  0.182 m (the minimum Safe Distance) NOTE: The result is the worst case of each individual source and simultaneous transmission sources (if applicable). Note: If the practical maximum antenna gain exceeds the value as described above, the safe distance must be recalculated and estimated. Beyond the specified distance: 0.182 m Person responsible for making this declaration: ____________________________ Hu Wei RF Engineer, EMC Lab Reliability Laboratory of Huawei Technologies Co., Ltd. May 4, 2015

Test Report

RF Test Report Product Name: Pico BTS Product Model: BTS3911B Report Number: SYBH(R)01787709EB-1 FCC ID: QISBTS3911B IC: 6369A-BTS3911B Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 28 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number for the test site located in Shenzhen is 97456, and the recognition numbers for the test site located in Shanghai is 684868. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers are 6369A-1 for the 3m chamber test site located at G2 building, 6369A-2 for the 3m chamber test site located at K3 building and 6369A-3 for the 10m chamber test site located at K3 building in Shenzhen; the recognition numbers are 6369D-1 for the 3m chamber test site and 6369D-2 for the 10m chamber test site located in Shanghai. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers for the test site No.1 located at G2 building in Shenzhen are R-3892, G-415, C-4361, and T-1348, and the accreditation numbers for the test site No.2 located at K3 building in Shenzhen are R-3760, G-485, C-4210 and T-1237. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 28 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Product Name: Pico BTS Product Model: BTS3911B Date of Receipt Sample: 2015-04-17 Start Date of Test: 2015-04-17 End Date of Test: 2015-05-04 Test Result: Pass Approved by Senior Engineer: 2015-05-04 Zhang Xinghai Date Name Signature Prepared by: 2015-05-04 Hu W ei Date Name Signature RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 28 Modification Record No. Last Report No. Modification Description 1 --- First report. RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 28 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location.............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 2.1 AWS Band (1710-1755 MHz paired with 2110-2155 MHz) ........................................................................ 7 2.2 PCS Band (1850-1915 MHz paired with 1930-1995 MHz) ....................................................................... 10 3 Description of the Equipment under Test (EUT) ................................................................................................... 13 3.1 General Description ................................................................................................................................. 13 3.2 EUT Identity ............................................................................................................................................. 13 3.3 Technical Specification ............................................................................................................................ 14 4 General Test Conditions / Configurations ............................................................................................................. 18 4.1 Test Modes .............................................................................................................................................. 18 4.2 EUT Configurations .................................................................................................................................. 19 4.3 Test Environments ................................................................................................................................... 21 4.4 Test Setups ...............................................................................…

Text truncated - open the document above for the full version.

Test Report

RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 75 Appendix A1: Transmitter Output Power RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 75 1 Result Table 1.1 Channel Power, Total NOTE 1: If applicable, the EIRP [W ] = 10 ^ ((Channel Power [dBm] + Antenna Gain [dBi]) / 10 - 3), and the ERP [W ] = EIRP [W ] / 1.64. NOTE 2: When the EUT is put into service, the practical maximum antenna gain may exceed the value as described below, and if exceed, the combination of the practical output power and the practical antenna gain should NOT exceed the required ERP/EIRP limit. EUT Conf. Channel Power [dBm] Total Channel Power [W] Antenna Gain [dBi] EIRP [W ] ERP [W] Verdict 5M_B 19.34 0.172 3 --- --- --- 5M _M 19.28 0.169 3 --- --- --- 5M _T 19.37 0.173 3 --- --- --- 10M_B 19.34 0.172 3 --- --- --- 10M _M 19.18 0.166 3 --- --- --- 10M_T 19.45 0.176 3 --- --- --- 15M_B 19.44 0.176 3 --- --- --- 15M _M 19.43 0.175 3 --- --- --- 15M_T 19.75 0.189 3 --- --- --- 20M_B 19.22 0.167 3 --- --- --- 20M _M 19.26 0.169 3 --- --- --- 20M_T 19.34 0.172 3 --- --- --- 1.2 Power Spectral Density NOTE 1: If applicable, the EIRP [W/MHz] = 10 ^ ((Power Spectral Density [dBm/MHz] + Antenna Gain [dBi]) / 10 - 3), and the ERP [W/MHz] = EIRP [W/MHz] / 1.64. NOTE 2: When the EUT is put into service, the practical maximum antenna gain may exceed the value as described below, and if exceed, the combination of the practical output power and the practical antenna gain should NOT exceed the required EIRP limit. EUT Conf. Channel Power Spectral Density [dBm/MHz] Total Channel PSD [dBm/MHz] Antenna Gain [dBi] EIRP [W /MHz] Verdict 5M_B 13.22 16.22 3 0.084 Pass 5M _M 12.67 15.67 3 0.074 Pass 5M _T 13.48 16.48 3 0.089 Pass 20M_B 7.47 10.47 3 0.022 Pass 20M_M 7.41 10.41 3 0.022 Pass 20M_T 7.6 10.6 3 0.023 Pass RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 75 1.3 Peak-to-Average Ratio EUT Conf. Peak-to-Average Ratio [dB] Verdict 5M_B 7.34 Pass 5M _M 7.33 Pass 5M _T 7.33 Pass 20M_B 7.13 Pass 20M_M 7.12 Pass 20M_T 7.15 Pass RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 75 2 Test Plot NOTE: Only the test plots for the measurements of Spectral Density and Peak-to-Average Ratio are supplied. 2.1 Power Spectral Density 2.1.1 5M_B Start Frequency [MHz] Stop Frequency [MHz] RBW [MHz] Detector Frequency [Hz] Emission [dBm] Limit [dBm] Verdict Sweep Point 2110 2155 1 RMS 2111.845 M 13.22 62 Pass 1001 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 75 2.1.2 5M_M Start Frequency [MHz] Stop Frequency [MHz] RBW [MHz] Detector Frequency [Hz] Emission [dBm] Limit [dBm] Verdict Sweep Point 2110 2155 1 RMS 2132.995 M 12.67 62 Pass 1001 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 75 2.1.3 5M_T Start Frequency [MHz] Stop Frequency [MHz] RBW [MHz] Detector Frequency [Hz] Emission [dBm] Limit [dBm] Verdict Sweep Point 2110 2155 1 RMS 2153.155 M 13.48 62 Pass 1001 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 7 of 75 2.1.4 20M_B Start Frequency [MHz] Stop Frequency [MHz] RBW [MHz] Detector Frequency [Hz] Emission [dBm] Limit [dBm] Verdict Sweep Point 2110 2155 1 RMS 2121.835 M 7.47 62 Pass 1001 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 8 of 75 2.1.5 20M_M Start Frequency [MHz] Stop Frequency [MHz] RBW [MHz] Detector Frequency [Hz] Emission [dBm] Limit [dBm] Verdict Sweep Point 2110 2155 1 RMS 2125.525 M 7.41 62 Pass 1001 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 9 of 75 2.1.6 20M_T Start Frequency [MHz] Stop Frequency [MHz] RBW [MHz] Detector Frequency [Hz] Emission [dBm] Limit [dBm] Verdict Sweep Point 2110 2155 1 RMS 2148.07 M 7.6 62 Pass 1001 RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 10 of 75 2.2 Peak-to-Average Ratio 2.2.1 5M_B RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 11 of 75 2.2.2 5M _M RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 12 of 75 2.2.3 5M _T RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security Level: Public Report No: SYBH(R)01787709EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 13 of 75 2.2.4 20M_B RF Test Report of BTS3911B FCC ID: QISBTS3911B, IC: 6369A-BTS3911B Security L…

Text truncated - open the document above for the full version.

Test Report

Text truncated - open the document above for the full version.

Contact Information

Applicant

Zhang Xinghai

[email protected]+86-755-2897-0299Fax: +86-755-8965-0226

Test Firm

Huawei Technologies Co., LTDZhou Fengyum

[email protected]86-755-28782917Fax: 86-755-89650226

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
8	24E	1.94 GHz - 1.98 GHz	204.00 mW	17M9D9W	0.002 ppm

Confidentiality

Long Term

Grant Notes

Power output listed is conducted. This device supports LTE bandwidth of 5 MHz, 10 MHz, 15 MHz and 20 MHz under Part 24E and 27 (Band 2, 1930-1990 MHz and Band 4, 2110-2155 MHz). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Under no conditions may an antenna gain including the cable loss be used that would exceed the EIRP power limits as specified in Part 24E and 27.