QISC2008CDMA 1X Mobile Phone

HUAWEI C2008 CDMA 1X Mobile Phone User Manual ii Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, express or implied. i Table of Contents 1 Getting to Know Your Phone.................................................1 2 Getting Started..........................................................................4 3 Voice Services...........................................................................6 4 Text Entry...................................................................................8 5 Message....................................................................................10 6 Phonebook...............................................................................11 7 Alarm Clock.............................................................................13 8 Security.....................................................................................14 9 Menu Options..........................................................................15 10 Warnings and Precautions.................................................23 1 1 Getting to Know Your Phone Your Phone Screen Earpiece End/Power key Left/Right soft key Dial key Navigation keys Number keys # key * key Charger/Headset connector OK key 2 Keys and Functions Press ... To...
Make or answer a call.
In the standby mode, display the dialed calls.
Power on or off the phone.
End a call or reject an incoming call.
Return to the idle screen.
In the standby mode, enter UNI-INFO.
Confirm a selection of the menu. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. |
Enter numbers and letters.
In the standby mode, press and hold key 1 to display the voice mail.
In the standby mode, press and hold key 2–9 to speed dial.
In any menu, select a menu item labeled with the corresponding number. 3 Press ... To... In the standby mode,
: Write a new message.
: Display the alarms.
: Display the inbox.
: Display the calendar. During a call, press to adjust the earpiece volume.
In the standby mode, press and hold it to switch between the bell mode and etiquette mode.
In the standby mode, enter *, P or T.
In the English input mode, press and hold it to switch between upper case and lower case.
In the text entry mode, press and hold it to display the symbol list.
Provide different functions according to the phone feature being used.
In the standby mode, when the phone lock is enabled, press and hold it to lock the phone.
In the standby mode, enter #.
In the edit mode, switch between the input modes or press and hold it to switch to the number input mode.
Provide different functions according to the phone feature being used. 4 Icons Icon Meaning Indicates the network signal strength. The phone is out of the service area. You have set the alarm clock. The phone is set to vibration. You have received a new message. The phone is roaming. Indicates the battery power level. 2 Getting Started Powering On/Off the Phone Press and hold to power on/off the phone. Installing the Battery Removing the Battery If the phone is powered on, press and hold to power off the phone first. 5 Installing/Removing the UIM Card If the phone is powered on, press and hold to power off the phone first and remove the battery. Then install/remove the UIM card as shown in the following figure. Charging the Battery 1. Connect the travel charger to the charger connector at the bottom of your phone. Make sure that the arrow on the charger connector faces the front side of the phone. 2. Connect the charger to an AC power socket. 3. During the charging, the icon on the upper right corner of the screen is in an animated status. 4. When the charging icon is blinking, the phone is fully charged. 5. Disconnect the charger from the AC power socket. 6. Press the gray buttons on both sides of the charger connector to disconnect the charger from the phone. Using the Function Menu 1. In the standby mode, press . 2. Press to select a function menu. 3. Press to display the selected menu. 6 4. Display the submenu by one of the following options:  Press to select a submenu and press to display the selected submenu.  Press the number key corresponding to the serial number of a submenu to display it. 5. Press to return to the previous menu or quit the function menu. 6. Press to return to the standby screen. 3 Voice Services Making a Call 1. In the standby mode, press the number keys to enter a phone number. 2. Press to dial the number. 3. Press to end the call or cancel the dialing. 7 Note
When the phone is locked, you need to enter the lock code to unlock the phone first; otherwise, you can dial emergency numbers only
In the standby mode, press to view dialed calls. Select a phone number and press to dial.
Select a contact in the phonebook and press to dial. Answering a Call When there is an incoming call, you can press , or to answer it; or you can press to reject it.
If the any-key answer function is enabled, you can press any key except and to answer an incoming call.
If the headset auto answer function is enabled, and the headset is connected to the phone, the incoming call can be answered automatically. Options During a Call  Adjusting the Vol…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: ATCB Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC2008 to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI C2008 CDMA Mobile Phone SECRET Page1,Total 8 External Photos of HUAWEI C2008 HUAWEI C2008 CDMA Mobile Phone SECRET Page2,Total 8 HUAWEI C2008 CDMA Mobile Phone SECRET Page3,Total 8 HUAWEI C2008 CDMA Mobile Phone SECRET Page4,Total 8 HUAWEI C2008 CDMA Mobile Phone SECRET Page5,Total 8 HUAWEI C2008 CDMA Mobile Phone SECRET Page6,Total 8 HUAWEI C2008 CDMA Mobile Phone SECRET Page7,Total 8 HUAWEI C2008 CDMA Mobile Phone SECRET Page8,Total 8

HUAWEI C2008 CDMA Mobile Station SECRET Page1, Total 1 ID Label Location_C2008

HUAWEI C2008 CDMA Mobile Station SECRET Page1, Total 1 ID Label _C2008

HUAWEI C2008 CDMA Mobile Phone SECRET Page1,Total 4 Internal Photos of HUAWEI C2008 HUAWEI C2008 CDMA Mobile Phone SECRET Page2,Total 4 HUAWEI C2008 CDMA Mobile Phone SECRET Page3,Total 4 HUAWEI C2008 CDMA Mobile Phone SECRET Page4,Total 4

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 March 6, 2007 RE: Huawei Technologies Co., Ltd. FCC ID: QISC2008 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please indicate where I can find the required labeling of 15.19(a)(1). This rule specifies that... “Receivers associated with the operation of a licensed radio service, e.g., FM broadcast under part 73 of this chapter, land mobile operation under part 90, etc., shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.” 2.) FYI: All Part 22H transceivers are required to show the power in terms of ERP. For this case the maximum measured ERP will be shown on the Grant of 0.201W. 3.) FYI: The correct equipment code for Part 22H only Cellphones is TNE. Only Part 24 PCS or Part 22/24 dual band phones receive the equipment code PCE. 4.) I see the Tune-Up procedure provides for a maximum power of +24.5dBm. However, I see nothing to indicate the target power tolerance during manufacturing. Kindly provide some indication as to the expected power variance to be expected during manufacturing. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

No. 2006E02033 Page 2 of 72 ©Copyright. All rights reserved by TMC Beijing. CONTENTS 1 TEST LABORATORY ..................................................................................................................... 4 1.1 T ESTINGLOCATION............................................................................................................ 4 1.2 T ESTINGENVIRONMENT..................................................................................................... 4 1.3 P ROJECT DATA.................................................................................................................... 4 2 CLIENT INFORMATION ............................................................................................................... 4 2.1 A PPLICANT INFORMATION................................................................................................................ 4 2.2 MANUFACTURER INFORMATION......................................................................................... 4 3 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 5 3.1 A BOUT EUT....................................................................................................................................... 5 3.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST.................................................... 5 3.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST....................................................... 5 4 OPERATIONAL CONDITIONS DURING TEST .......................................................................... 6 4.1 S CHEMATIC TEST CONFIGURATION..................................................................................... 6 4.2 SAR M EASUREMENT SET-UP.............................................................................................. 7 4.3 D ASY4 E-FIELDPROBE SYSTEM......................................................................................... 8 4.4 E- FIELD PROBE CALIBRATION............................................................................................ 8 4.5 O THER TEST EQUIPMENT................................................................................................... 9 4.6 E QUIVALENT TISSUES....................................................................................................... 10 4.7 S YSTEM SPECIFICATIONS.................................................................................................. 10 5 CHARACTERISTICS OF THE TEST .......................................................................................... 11 5.1 A PPLICABLELIMIT REGULATIONS.................................................................................... 11 5.2 A PPLICABLEMEASUREMENT STANDARDS........................................................................ 11 6 CONDUCTED OUTPUT POWER MEASUREMENT ................................................................ 11 6.1 S UMMARY........................................................................................................................ 11 6.2 C ONDUCTED POWER........................................................................................................ 12 7 TEST RESULTS............................................................................................................................. 12 7.1 D IELECTRIC PERFORMANCE............................................................................................. 12 7.2 S YSTEM VALIDATION........................................................................................................ 13 7.3 S UMMARY OF MEASUREMENT RESULTS........................................................................... 13 7.4 C ONCLUSION.................................................................................................................... 14 8 MEASUREMENT UNCERTAINTY ............................................................................................. 14 9 MAIN TEST INSTRUMENTS ...................................................................................................... 15 ANNEX A MEASUREMENT PROCESS ........................................................................................ 16 ANNEX B TEST LAYOUT .............................................................................................................. 17 ANNEX C GRAPH RESULTS ......................................................................................................... 21 ANNEX D SYSTEM VALIDATION RESULTS.............................................................................. 57 ANNEX E PROBE CALIBRATION CERTIFICATE ...................................................................... 58 ANNEX F DIPOLE CALIBRATION CERTIFICATE ..................................................................... 67 No. 2006E02033 Page 4 of 72 ©Copyright. All rights reserved by TMC Beijing. 1 Test Laboratory 1.1 Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MII Address: No 52, Huayuan beilu, Haidian District, Beijing,P.R.China Postal Code: 100083 Telephone: 00861062303288 Fax: 00861062304793 1.2 Testing Environment Temperature: Min. = 15 qC,Max. = 30 qC Relative humidity: Min. = 30%, Max. = 70% Ground system resistance: < 0.5 : Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards . 1.3 Project data Project Leader: Wang Hongbo Test Engineer: Sun Qian Testing Start Date: Dec 29, 2006 Testing End Date: Dec 29, 2006 2 Client Information 2.1 Applicant Information Company Name: HUAWEI Technologies Co., Ltd. Address /Post: Bantian, Longgang District, Shenzhen, Guangdong City: Shenzhen Postal Code: 518129 Country: China Telephone: 0755-28780808 Fax: 0755-28780808 2.2 Manufacturer Information Company Name: HUAWEI Technologies Co., Ltd. Address /Post: Bantian, Longgang District, Shenzhen, Guangdong City: Shenzhen Postal …

Text truncated - open the document above for the full version.

No. 2006E02033 Page 32 of 72 ©Copyright. All rights reserved by TMC Beijing. Fig. 12 Z-Scan at power reference point (CDMA 835MHz CH1013) No. 2006E02033 Page 33 of 72 ©Copyright. All rights reserved by TMC Beijing. CDMA 1X Right Cheek High Date/Time: 2006-12-29 11:25:30 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İr = 41.7; ȡ = 1000 kg/m3 Ambient Temperature:22.5oC Liqiud Temperature: 21.4oC Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.868 mW/g Cheek High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.7 V/m; Power Drift = -0.175 dB Peak SAR (extrapolated) = 1.07 W/kg SAR(1 g) = 0.791 mW/g; SAR(10 g) = 0.531 mW/g Maximum value of SAR (measured) = 0.806 mW/g   0 dB = 0.806mW/g Fig. 13 Right Hand Touch Cheek CDMA 835MHz CH777 No. 2006E02033 Page 34 of 72 ©Copyright. All rights reserved by TMC Beijing. Fig. 14 Z-Scan at power reference point (CDMA 835MHz CH777) No. 2006E02033 Page 35 of 72 ©Copyright. All rights reserved by TMC Beijing. CDMA 1X Right Cheek Middle Date/Time: 2006-12-29 11:54:50 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İr = 41.7; ȡ = 1000 kg/m3 Ambient Temperature:22.5oC Liqiud Temperature: 21.4oC Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.21 mW/g Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.4 V/m; Power Drift = -0.191 dB Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = 1.02 mW/g; SAR(10 g) = 0.691 mW/g Maximum value of SAR (measured) = 1.05 mW/g   0 dB = 1.05mW/g Fig.15 Right Hand Touch Cheek CDMA 835MHz CH384 No. 2006E02033 Page 36 of 72 ©Copyright. All rights reserved by TMC Beijing. Fig. 16 Z-Scan at power reference point (CDMA 835MHz CH384) No. 2006E02033 Page 37 of 72 ©Copyright. All rights reserved by TMC Beijing. CDMA 1X Right Cheek Low Date/Time: 2006-12-29 12:17:47 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İr = 41.7; ȡ = 1000 kg/m3 Ambient Temperature:22.5oC Liqiud Temperature: 21.4oC Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.597 mW/g Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.7 V/m; Power Drift = -0.173 dB Peak SAR (extrapolated) = 0.724 W/kg SAR(1 g) = 0.535 mW/g; SAR(10 g) = 0.362 mW/g Maximum value of SAR (measured) = 0.544 mW/g   0 dB = 0.544mW/g Fig. 17 Right Hand Touch Cheek CDMA 835MHz CH1013 No. 2006E02033 Page 38 of 72 ©Copyright. All rights reserved by TMC Beijing. Fig. 18 Z-Scan at power reference point (CDMA 835MHz CH1013) No. 2006E02033 Page 39 of 72 ©Copyright. All rights reserved by TMC Beijing. CDMA 1X Right Tilt High Date/Time: 2006-12-29 13:42:50 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İr = 41.7; ȡ = 1000 kg/m3 Ambient Temperature:22.5oC Liqiud Temperature: 21.4oC Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.456 mW/g Tilt High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.3 V/m; Power Drift = -0.180 dB Peak SAR (extrapolated) = 0.563 W/kg SAR(1 g) = 0.424 mW/g; SAR(10 g) = 0.293 mW/g Maximum value of SAR (measured) = 0.431 mW/g   0 dB = 0.431mW/g Fig. 19 Right Hand Tilt 15°CDMA 835MHz CH777 No. 2006E02033 Page 40 of 72 ©Copyright. All rights reserved by TMC Beijing. Fig. 20 Z-Scan at power reference point (CDMA 835MHz CH777) No. 2006E02033 Page 41 of 72 ©Copyright. All rights reserved by TMC Beijing. CDMA 1X Right Tilt Middle Date/Time: 2006-12-29 13:13:21 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İr = 41.7; ȡ = 1000 kg/m3 Ambient Temperature:22.5oC Liqiud Temperature: 21.4oC Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.574 mW/g Tilt Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.5 V/m; Power Drift = -0.157 dB Peak SAR (extrapolated) = 0.695 W/kg SAR(1 g) = 0.528 mW/g; SAR(10 g) = 0.368 mW/g Maximum value of SAR (measured) = 0.544 mW/g   0 dB = 0.544mW/g Fig. 21 Right Hand Tilt 15°CDMA 835MHz CH384 No. 2006E02033 Page 42 of 72 ©Copyright. All rights reserved by TMC Beijing. Fig. 22 Z-Scan at power reference point (CDMA 835MHz CH384) No. 2006E02033 Page 43 of 72 ©Copyright. All rights reserved by TMC Beijing. CDMA 1X Right Tilt Low Date/Time: 2006-12-29 12:46:50 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İr = 41.7; ȡ = 1000 kg/m3 Ambient Temperature:22.5oC Liqiud Temperature: 21.4oC Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.310 mW/g Tilt Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.2 V/m; Power Drift = -0.187 dB Peak SAR (extrapolated) = 0.384 W/kg SAR(1 g) = 0.286 mW/g; SAR(10 g) = 0.199 mW/g Maximum value of SAR (measured) = 0.294 mW/g   0 dB = 0.294mW/g Fig. 2…

Text truncated - open the document above for the full version.

FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total3 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total3 Channel 283（TM1） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total3 Channel 283（TM3） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total7 Appendix B Occupied Bandwidth According to FCC Part 2.1049 & Part 22 Subpart H FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total7 Channel 1013（TM1） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total7 Channel 1013（TM3） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page4, Total7 Channel 283（TM1） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page5, Total7 Channel 283（TM3） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page6, Total7 Channel 777（TM1） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page7, Total7 Channel 777（TM3） FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total5 Appendix C Band Edges Compliance According to FCC Part 2.1051 & 22.917 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total5 TM1 Left Edge (824 MHz) Channel 1013 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total5 Right Edge (849MHz) Channel 777 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page4, Total5 TM3 Left Edge (824 MHz) Channel 1013 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page5, Total5 Right Edge (849MHz) Channel 777 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total19 Appendix D Spurious Emission at Antenna Terminal According to FCC Part 2.1051 & 22.917 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total19 TM1 Channel 1013 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page4, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page5, Total19 Channel 283 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page6, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page7, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page8, Total19 Channel 777 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page9, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page10, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page11, Total19 TM3 Channel 1013 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page12, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page13, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page14, Total19 Channel 283 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page15, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page16, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page17, Total19 Channel 777 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page18, Total19 FCC ID: QISC2008 Report No: SYBH(E)26122006 Confidential Information of HUAWEI. No Distribution without Permission Page19, Total19 FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page1, Total7 Appendix E Radiated Spurious Emission According to FCC Part 2.1053 & 22.917 FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page2, Total7 Traffic Mode (9kHz-30MHz) - - - - - - - - - - 0 920k40680 k 100200 600k12 5 15M 2030 Level in Frequency in Hz FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page3, Total7 Traffic Mode (30MHz-1GHz) - - - - - - - - - - 0 30 56 810020304050 801 Level in Frequency in Hz Note: The frequency which exceeded the limit was the carrier frequency. FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page4, Total7 Traffic Mode (1GHz-12.75GHz) -…

Text truncated - open the document above for the full version.

FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page1, Total4 Appendix H Photos of Test Setup FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page2, Total4 1 Radiated Emission Radiated Disturbance 2 Radiated Spurious Emission Radiated Spurious Emission (below 1GHz) FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page3, Total4 Radiated Spurious Emission (above 1GHz) FCC ID: QISC2008 Report No: SYBH(E) 26122006 Confidential Information of Huawei. No Distribution without Permission Page4, Total4 3 Conducted Emissions Conducted Emissions for AC Ports