QISC209SCDMA 1X digital mobile phone

Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, express or implied. i Table of Contents 1 Getting to Know Your Phone.............................................. 1 2 Menu Tree............................................................................. 4 3 Getting Started..................................................................... 5 4 Text Input.............................................................................. 7 5 Warnings and Precautions ............................................... 10 1 1 Getting to Know Your Phone Your Phone 2 Note z There are two C209s models. One has a removable user identity module (R-UIM) and the other does not. z This manual describes the C209s with the R-UIM. If a function is marked with "'", it indicates that this function is only available in the C209s with the R-UIM. But the remaining functions are supported by both the C209s models. Appearance Descriptions 1 Earpiece – 2 Screen – Press to write message. Press to access the inbox. Press to set the alarms. 3 Navigation keys Press to view the calendar. 4 Soft keys z When the phone is closed, press and to enable or disable the keyguard. z Select the option displayed on the lower left corner of the screen. 5 OK key Confirm a selection or display a menu. z Access the Call History screen. 6 Dialing key z Make or answer a call. z Power on or off the phone (by pressing and holding it). 7 End/Power key z End or reject a call. 3 z Press and hold to access Voice Mail. z Press and hold 2–9 to speed dial a phone number. 8 Number keys z Press and hold 0 to input + 9 * key Enable or disable the vibration mode (by pressing and holding it). 10 # key Enable the phone lock (by pressing and holding it). 11 Speaker – 12 Charger interface – Screen Icons Icon Meaning IconDescription Signal strength Battery level Non-service Roaming New Message Vibration Alarm clock 4 2 Menu Tree Messages Phone Book Call History 1 Write Message 2 Inbox 3 Outbox 4 Voice Mail 5 Delete 6 Msg Settings 1 Search 2 New 3 Groups 4 Speed Dial 5 Delete 6 Options 1 Missed Calls 2 Received Calls 3 Dialed Calls 4 Delete 5 Call Duration Extras Sound Settings 1 Alarm 2 Calculator 3 Calendar 4 Game 5 Time Zones 6 SW Version 1 Volume 2 Ring Type 3 Ring Tones 4 Alarm Tones 5 Key Tones 6 Keybeep Length 7 Power Up 8 Power Down 9 SMS Recv. Tone 10 SMS Send Tone 1 Display 2 Time 3 Call Settings 4 Phone Settings 5 Security 6 Auto Key Guard 7 Factory Set. 8 Privacy 5 3 Getting Started Installing the Battery To install the battery, do as follows. 1 2 3 Removing the Battery To remove the battery, do as follows. 1 2 "'"Installing/Removing the UIM Card After removing the battery, do as follows to install or remove the UIM card. Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. Make sure that the arrow on the charger 6 connector faces the front side of the phone. 2. Connect the charger to a power socket. 3. The phone starts charging. The screen displays the charging animation. 4. When the animation becomes static, disconnect the charger from the power socket. 5. Disconnect the charger from the phone. Press the gray buttons on both sides of the charger connector, and then pull it out from the charger interface. Accessing a Menu 1. In the standby mode, press to display the main menu. 2. Press to select a function menu. 3. Press to display the selected menu. 4. Press to select a submenu and press to display it. 5. Press to return to the previous menu or exit the function menu. 6. Press to return to the standby screen. Making a Call 1. In the standby mode, press the number keys to enter a phone number. 2. Press to dial the number. 3. Press to end the call or cancel the dialing. 7 z When the phone is locked, you need to unlock the phone first. Otherwise, you can only make emergency calls. z Press continuously to enter *, P or T. Receiving a Call When there is an incoming call, you can do as follows: z Press , or OK key to answer the call. z Press or to reject the call. z When the any key answer function is enabled, press any key to answer the call (except , and ). z When the auto-answer function is enabled, the call is answered automatically in the preset duration. During a call, press to adjust the earpiece volume for a better calling effect. Phone Lock The phone lock protects your phone from unauthorized use. The default phone lock code is "0000". 4 Text Input Text Input Modes The phone supports the following text input modes: z Alphabetical text input mode: 8 ¾ \: Upper case /lower case alphabetical text input mode z Predictive input mode: ¾ \: Upper case /lower case predictive English input mode z "123" input mode: Enter numbers. z Symbol input mode: Enter symbols. Basic Operations In the text editing mode, you can choose the following options: z Press to switch the text input modes. z Press and hold to switch between the "123" input mode and the current text input mode. z Press to switch between uppercase and lowercase. z Press and hold to display the symbol list. z Press to delete the letter on the left of the cursor. z Press and hold to clear all the letters at a time. z In any input mode (except the "123" input mode), press to enter a space. z When selecting a letter or word, press to confirm the …

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP518129 Page 1/1 To: MET LABORATORIES, INC. Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Authorization 2007-12-06 To whom it may concern: We the undersigned, hereby authorize MET LABORATORIES, INC. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by MET LABORATORIES, INC.on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: MET LABORATORIES, INC. Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality MET LABORATORIES, INC. 914 W. Patapsco Avenue Baltimore MarylandUnited States Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC209S to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2007-12-07 MET LABORATORIES, INC. 914 W. Patapsco Avenue Baltimore MarylandUnited States Subject: SHORT-TERM Confidentiality Request for FCC ID: QISC209S Product Name: CDMA 1X Digital Mobile Phone Product Model: HUAWEI C209s To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to MET LABORATORIES, INC. should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify MET LABORATORIES, INC. with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify MET LABORATORIES, INC. in the event the information regarding the product of the product is made available to the public. MET LABORATORIES, INC. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely,

HUAWEI C209s CDMA Handset SECRET Page1,Total 8 External Photos of HUAWEI C209s HUAWEI C209s CDMA Handset SECRET Page2,Total 8 HUAWEI C209s CDMA Handset SECRET Page3,Total 8 HUAWEI C209s CDMA Handset SECRET Page4,Total 8 HUAWEI C209s CDMA Handset SECRET Page5,Total 8 HUAWEI C209s CDMA Handset SECRET Page6,Total 8 HUAWEI C209s CDMA Handset SECRET Page7,Total 8 HUAWEI C209s CDMA Handset SECRET Page8,Total 8

HUAWEI C209s CDMA Handset SECRET Page1,Total 2 HUAWEI C209s CDMA Handset SECRET Page2,Total 2

HUAWEI C209s CDMA Handset SECRET Page1,Total 5 Internal Photos of HUAWEI C209s HUAWEI C209s CDMA Handset SECRET Page2,Total 5 HUAWEI C209s CDMA Handset SECRET Page3,Total 5 HUAWEI C209s CDMA Handset SECRET Page4,Total 5 HUAWEI C209s CDMA Handset SECRET Page5,Total 5

NO.: RZA2007-1137 TEST REPORT Test name Electromagnetic Field (Specific Absorption Rate) Product CDMA 1X Digital Mobile Phone Model HUAWEI C209s FCC ID QISC209S Client HUAWEI Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 2of 74 GENERAL TERMS 1. The test report is invalid if not marked with “exclusive stamp for the data report” or the stamp of the TA. 2. Any copy of the test report is invalid if not re-marked with the “exclusive stamp for the test report” or the stamp of TA. 3. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 4. The test report is invalid if there is any evidence of erasure and/or falsification. 5. If there is any dissidence for the test report, please file objection to the test center within 15 days from the date of receiving the test report. 6. Normally, entrust test is only responsible for the samples that have undergone the test. 7. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permissions of TA. Address: Room4,No.399,Cailun Rd,Zhangjiang Hi-Tech Park, Pudong Shanghai,China Post code: 201203 Telephone: +86-021-50791141/2/3 Fax：+86-021-50791147 Website: http://www.ta-shanghai.com E-mail: [email protected] TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 3of 74 GENERAL SUMMARY Product CDMA 1X Digital Mobile Phone Model HUAWEI C209s Client HUAWEI Technologies Co., Ltd. Type of test Entrusted Manufacturer HUAWEI Technologies Co., Ltd. Arrival Date of sample Nov.8 th , 2007 Place of sampling (Blank) Carrier of the samples Yi Fang Quantity of the samples One Date of product (Blank) Base of the samples (Blank) Items of test SAR Series number PD7NBB17A3000292 Standard(s) EN 50360–2001: Product standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones. EN 50361–2001: Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones. ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE 1528–2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental TeCHniques. OET Bulletin 65 (Edition 97-01) and Supplement C (Edition 01-01): Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits. IEC 62209-1: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 1: Procedure to determine the Specific Absorption Rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) Conclusion Localized Specific Absorption Rate (SAR) of this portable wireless equipment has been measured in all cases requested by the relevant standards cited in Clause 5.2 of this test report. Maximum localized SAR is below exposure limits specified in the relevant standards cited in Clause 5.1 of this test report. General Judgment: Pass (Stamp) Date of issue: Nov. 16 th , 2007 Comment TX Freq. Band: 1851-1909MHz (CDMA) Max. Power: 0.25W(CDMA) The test result only responds to the measured sample. Approved by (Chenguang Zheng) Revised by (Weizhong Yang) Performed by (Minbao Ling) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 4of 74 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES ............................................................................................... 5 2 GENERAL CONDITIONS................................................................................................................. 5 3 DESCRIPTION OF EUT................................................................................................................... 5 3.1 ADDRESSING INFORMATION RELATED TO EUT.................................................................................................... 5 3.2 CONSTITUENTS OF EUT ...................................................................................................................................... 6 3.3 GENERAL DESCRIPTION....................................................................................................................................... 6 4 OPERATIONAL CONDITIONS DURING TEST ............................................................................... 6 4.1 SCHEMATIC TEST CONFIGURATION...................................................................................................................... 6 4.2 SAR MEASUREMENT SET-UP...............................................................................................................................7 4.3 DASY4 E-FIELD PROBE SYSTEM.......................................................................................................................... 9 4.4 E-FIELD PROBE CALIBRATION........................................................................................................................... 10 4.5 OTHER TEST EQUIPMENT................................................................................................................................... 10 4.6 EQUIVALENT TISSUES........................................................................................................................................ 11 4.7 SYSTEM SPECIFICATIONS................................................................................................................................... 12 5 CHARACTERISTICS OF THE TEST ............................................................................................. 12 5.1 APPLICABLE LIMIT REGULATIONS..................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 31of 74 CDMA PCS Left Tilt Middle Communication System: CDMA PCS; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; ε r = 39.6; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(5.15, 5.15, 5.15); - Electronics: DAE3 Sn452; Tilt Middle/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.42 mW/g Tilt Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.3 V/m; Power Drift = -0.148 dB Peak SAR (extrapolated) = 1.95 W/kg SAR(1 g) = 1.22 mW/g; SAR(10 g) = 0.683 mW/g Maximum value of SAR (measured) = 1.37 mW/g Figure. 15 Left Hand Tilt 15° CDMA PCS Channel 600 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 32of 74 Figure. 16 Z-Scan at power reference point (Left Hand Tilt 15° CDMA PCS Channel 600) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 33of 74 CDMA PCS Left Tilt Low Communication System: CDMA PCS; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used: f = 1852 MHz; σ = 1.39 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(5.15, 5.15, 5.15); - Electronics: DAE3 Sn452; Tilt Low/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.654 mW/g Tilt Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.1 V/m; Power Drift = -0.115 dB Peak SAR (extrapolated) = 0.912 W/kg SAR(1 g) = 0.577 mW/g; SAR(10 g) = 0.323 mW/g Maximum value of SAR (measured) = 0.646 mW/g Figure. 17 Left Hand Tilt 15° CDMA PCS Channel 25 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 34of 74 Figure.18 Z-Scan at power reference point (Left Hand Tilt 15° CDMA PCS Channel 25) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 35of 74 CDMA PCS Right Cheek High Communication System: CDMA PCS; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.43 mho/m; ε r = 39.5; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(5.15, 5.15, 5.15); - Electronics: DAE3 Sn452; Cheek High/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.833 mW/g Cheek High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.7 V/m; Power Drift = -0.142 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.812 mW/g; SAR(10 g) = 0.503 mW/g Maximum value of SAR (measured) = 0.880 mW/g Figure. 19 Right Hand Touch Cheek CDMA PCS Channel 1175 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 36of 74 Figure. 20 Z-Scan at power reference point (Right Hand Touch Cheek CDMA PCS Channel 1175) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 37of 74 CDMA PCS Right Cheek Middle Communication System: CDMA PCS; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; ε r = 39.6; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(5.15, 5.15, 5.15); - Electronics: DAE3 Sn452; Cheek Middle/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.945 mW/g Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.3 V/m; Power Drift = -0.129 dB Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.847 mW/g; SAR(10 g) = 0.530 mW/g Maximum value of SAR (measured) = 0.918 mW/g Figure. 21 Right Hand Touch Cheek CDMA PCS Channel 600 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 38of 74 Figure. 22 Z-Scan at power reference point (Right Hand Touch Cheek CDMA PCS Channel 600) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 39of 74 CDMA PCS Right Cheek Low Communication System: CDMA PCS; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used: f = 1852 MHz; σ = 1.39 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(5.15, 5.15, 5.15); - Electronics: DAE3 Sn452; Cheek Low/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.562 mW/g Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.8 V/m; Power Drift = -0.165 dB Peak SAR (extrapolated) = 0.674 W/kg SAR(1 g) = 0.505 mW/g; SAR(10 g) = 0.320 mW/g Maximum value of SAR (measured) = 0.550 mW/g Figure. 23 Right Hand Touch Cheek CDMA PCS Channel 25 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 40of 74 Figure. 24 Z-Scan at power reference point (Right Hand Touch Cheek CDMA PCS Channel 25) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 41of 74 CDMA PCS Right Tilt High Communication System: CDMA PCS; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.43 mho/m; ε r = 39.5; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(5.15, 5.15, 5.15); - Electronics: DAE3 Sn452; Tilt High/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.907 mW/g Tilt High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.6 V/m; Power Drift = -0.121 dB Peak SAR (extrapolated) = 1.33 W/kg SAR(1 g) = 0.865 mW/g; SAR(10 g) = 0.496 mW/g Maximum value of SAR (measured) = 0.963 mW/g Figure. 25 Right Hand Tilt 15° CDMA PCS Channel 1175 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 42of 74 Figure. 26 Z-Scan at power reference point (Right Hand Tilt 15° CDMA PCS Channel 1175) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 43of 74 CDMA PCS Right Tilt Middle Communication System: CDMA PCS; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Head 1900MHz Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; ε r = 39.6; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; Conv…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 61of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 62of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 63of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 64of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 65of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 66of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 67of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 68of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 69of 74 ANNEX F： D1900V2 DIPOLE CALIBRATION CERTIFICATE TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 70of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 71of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 72of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 73of 74 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1137 Page 74of 74

FCC TEST REPORT OF CDMA 1X Digital Mobile Phone M/N: HUAWEI C209s DEC. 06, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH(R)142102007EB-1 FCC ID: QISC209S Report No: SYBH(R)142102007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total40 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH(R)142102007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total40 REPORT ON FCC TEST REPORT OF CDMA 1X Digital Mobile Phone M/N: HUAWEI C209s Report No: SYBH(R)142102007EB-1 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 10 items need to be tested, 10 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2007.12.06 Date Name signature Technical Responsibility For Area of Testing 2007.12.05 Date Name signature Test Lab Engineer 2007.12.05 Date Name signature Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 Report No: SYBH(R)142102007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total40 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..................................................................................................................... 12 6.1 EFFECTIVE ISOTROPIC RADIATED POWER OF TRANSMITTER (EIRP)....................................................... 12 6.2 CONDUCTED OUTPUT POWER............................................................................................................... 15 6.3 MODULATION CHARACTERISTICS.......................................................................................................... 17 6.4 OCCUPIED BANDWIDTH........................................................................................................................ 19 6.5 BAND EDGES COMPLIANCE.................................................................................................................. 21 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 23 6.7 RADIATED SPURIOUS RADIATION.......................................................................................................... 25 6.8 FREQUENCY STABILITY........................................................................................................................ 29 7 EMC Test.................................................................................................................................................. 33 7.1 CONDUCTED EMISSION AT POWER PORT.............................................................................................. 33 7.2 RADIATED EMISSION OF ENCLOSURE IN IDLE …

Text truncated - open the document above for the full version.

FCC ID: QISC209S Report No: SYBH(R) 142102007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total3 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part24 Subpart E FCC ID: QISC209S Report No: SYBH(R) 142102007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total3 PCS band: Channel 600TM1 FCC ID: QISC209S Report No: SYBH(R) 142102007EB-1 Confidential Information of Huawei. No Distribution wi…

Text truncated - open the document above for the full version.