QISC223SCDMA 1X digital mobile phone

C223s CDMA 1X Digital Mobile Phone User Guide Copyright © 2007 Huawei Technologies Co.,Ltd. All rights reserved. and other trademarks are the property of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, express or implied. For any question of this document, call the service hotline for details. Huawei Technologies Co.,Ltd. Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: +86-755-28780808 Global hotline: +86-755-28560808 Email: [email protected] Website: www.huawei.com 1 1 Getting to Know Your Phone Your Phone 1 2 4 3 6 7 11 8 9 10 5 12 2 Note z There are two C223s models. One has a removable user identity module (R-UIM) and the other does not. z This manual describes the C223s with the R-UIM. If a function is marked with "'", it indicates that this function is only available in the C223s with the R-UIM. But the remaining functions are supported by both the C223s models. Appearance Descriptions 1 Earpiece – 2 Screen – Press to write message. Press to view the calendar. Press to access the inbox. 3 Navigation keys Press to view the name list. 4 Soft keys z When the phone is closed, before it is in the battery saving mode, press and to enable or disable the keyguard. z Select the option displayed on the lower corner of the screen. 5 OK key z Confirm a selection. z Access the FM screen. z Access the Call Records screen. 6 Dialing key z Make or answer a call. 7 End/Power key z Power on or off the phone (by pressing and holding it). 3 z End or reject a call. z Return the Idle screen. z Press and hold 1 to access Voice Mail. z Press and hold 2–9 to speed dial a phone number. 8 Number keys z Press and hold 0 access the FM. 9 * key Enable or disable the vibration mode (by pressing and holding it). 10 # key Enable the phone lock (by pressing and holding it). 11 Speaker – 12 Charger interface – Screen Icons Icon Meaning IconDescription Signal strength Silence mode Phone lock Vibration New voice mail Alarm clock Non-service Call privacy New Message Battery level Urgent message Roaming High urgent message Calling Calling in roaming Headset CDMA 1X 4 2 Menu Tree Messages Phonebook Call Records 1 Write Message 2 Inbox 3 Outbox 4 Draftbox 5 Voice Mail 6 Delete All 7 Settings 1 Search 2 Add New 3 Groups 4 Speed Dial 5 Delete All 6 'Copy All 7Options 1 Missed Calls 2 Answered Calls 3 Dialed Calls 4 Delete All 5 Call Duration Extras Sound Settings 1 Alarms 2 Calendar 3 Calculator 4 Stopwatch 5 Time Zone 6 Games 7 FM 1 Volume 2 Alert Mode 3 Ring Tone 4 Alarm Tone 5 SMS Receive Tone 6 SMS Send Tone 7 Other Tones 1 Display 2 Time 3 Call 4 Language 5 Security 6 Factory Restore 7 Keyguard 5 3 Getting Started Installing the Battery To install the battery, do as follows. 1 2 3 Removing the Battery To remove the battery, do as follows. 1 2 "'"Installing/Removing the UIM Card After removing the battery, do as follows to install or remove the UIM card. 6 Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. Make sure that the arrow on the charger connector faces the front side of the phone. 2. Connect the charger to a power socket. 3. The phone starts charging. The screen displays the charging animation. 4. When the animation becomes static, disconnect the charger from the power socket. 5. Disconnect the charger from the phone. Press the gray buttons on both sides of the charger connector, and then pull it out from the charger interface. Accessing a Menu 1. In the standby mode, press to display the main menu. 2. Press to select a function menu. 3. Press to display the selected menu. 4. Press to select a submenu and press to display it. 5. Press to return to the previous menu or exit the function menu. 6. Press to return to the standby screen. Making a Call 1. In the standby mode, press the number keys to enter a phone number. 2. Press to dial the number. 7 3. Press to end the call or cancel the dialing. z When the phone is locked, you need to unlock the phone first. z Press continuously to enter *, P, T or +. Receiving a Call When there is an incoming call, you can do as follows: z Press or to answer the call. z Press or to reject the call. z When the any key function is enabled, press any key to answer the call (except , Navigation keys and). z When the auto-answer function is enabled, the call is answered automatically in the preset duration. During a call, press to adjust the earpiece volume for a better calling effect. Phone Lock The phone lock protects your phone from unauthorized use. The default phone lock code is "0000". 4 Text Input Text Input Modes The phone supports the following text input modes: z Alphabetical text input mode: 8 ¾ ENABC\ ENAbc \ ENabc: Upper case/initial capital/lower case English alphabetical text input mode z Predictive input mode: ¾ \ \ : Upper case/initial capital/lower case predictive English input mode z Numbers input mode: ¾ 123: "123" input mode z Symbol input mode: ¾ Enter the English Symbols. Basic Operations In the text editing mode, you can choose the following options: z Press to switch the text input modes. z Press and hold to switch between uppercase initial capital and lowercase. z Press to display the symbol list. z Press and hold to switch between alphabetical text input mode and predictive input mode. z Press to delete the letter on the left of the cursor. z Press and hold to clear the letter. z In any input mode (except the "123"), press 0 to enter a space. z When selecting a letter or word, press to confirm the selection followed by the cursor on the left/right. Alphabetical Text Input Press the key labeled with the desir…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP518129 Page 1/1 To: MET LABORATORIES, INC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Authorization 2008-01-07 To whom it may concern: We the undersigned, hereby authorize MET LABORATORIES, INC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by MET LABORATORIES, INC on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: MET LABORATORIES, INC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality MET LABORATORIES, INC. 914 W. Patapsco Avenue Baltimore MarylandUnited States Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC223S to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2008-01-09 MET LABORATORIES, INC. 914 W. Patapsco Avenue Baltimore MarylandUnited States Subject: SHORT-TERM Confidentiality Request for FCC ID: QISC223S Product Name: CDMA 1X Digital Mobile Phone Product Model: HUAWEI C223s To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to MET should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify MET with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify MET in the event the information regarding the product of the product is made available to the public. MET will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely,

CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page1,Total 7 External Photos of HUAWEI C223s CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page2,Total 7 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page3,Total 7 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page4,Total 7 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page5,Total 7 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page6,Total 7 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page7,Total 7

CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page1,Total 1

NNOOTETE:: 1.The undefined radiues are 0.3MM1.The undefined radiues are 0.3MM A4A4 AA BB CC DD EE FF 11223344 11223344 AA BB CC DD EE C o n c e p t D e s i g n C o n c e p t D e s i g n R E L E A S E L R E L E A S E L EE V E L V E L :: F I L E N A M E F I L E N A M E :: RREEVV EECCO NO NOO.. DESCRIPTIONDESCRIPTION MASS(Kg)MASS(Kg):: AND SHALL NAND SHALL NOOT BE REPT BE REPRRODUCED ODUCED CCOPYIEDOPYIED THE PTHE PRROPEOPERRTTY OF HY OF HUUAAWEIWEI TECH TECH CCoo..LLTTDD.. THESE DTHESE DRRAAWINGS AND SPECIFIWINGS AND SPECIFICCAATION ARETION ARE THE PRIORTHE PRIOR WRIWRITTTEN TEN CCONSENT OF HONSENT OF HUUAAWEIWEI OR USED IN ANY MANNEROR USED IN ANY MANNER WITHOUTWITHOUT TECH TECH CCoo.. LLTDTD ..XXXXXX ..XXXX .X.X ANGANG MMAAT'LT'L:: SHEESHEETT:: HHUUAAWEIWEI TECHNOTECHNOLLOGIES OGIES CCoo..LLTDTD APPDAPPD:: SSTTADAD:: DDRRAAWW:: CHKDCHKD:: DDAATETE:: DDAATETE:: DDAATETE:: DDAATETE:: SSCCALEALE:: FINISHFINISH:: UNIT'SUNIT'S:: RREEVV PPRRODUCODUCTT:: PPAARRT NT NOO..:: DDWG NWG NOO..:: TITLETITLE:: OFOF FF 0.0000.000 C203SC203S Shensuishan Yuzongguo HongNiYu ZhongGang 2007-11-28 2007-11-28 2007-11-28 2007-11-28 A0 C203S_ESN_Lable(英文) 1:1 1 1 MM HUAWEI TECHNOLOGIES CO., LTD. 英文版 34.134.1 3 6 3 6 2 4 . 6 2 4 . 6 16.316.3 1515 8 . 6 8 . 6 MADE BY HUAWEI DKBA8.817.7640 51651102 Fasson72826 223s QISC223S

CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page1,Total 8 Internal photos of HUAWEI C223s CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page2,Total 8 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page3,Total 8 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page4,Total 8 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page5,Total 8 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page6,Total 8 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page7,Total 8 CDMA 1X DIGITAL MOBILE PHONE HUAWEI C223s SECRET Page8,Total 8

NO.: RZA2007-1404FCC OET 65 TEST REPORT Test name Electromagnetic Field (Specific Absorption Rate) Product CDMA 1X Digital Mobile Phone Model HUAWEI C223s FCC ID QISC223S Client HUAWEI Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 2of 79 GENERAL TERMS 1. The test report is invalid if not marked with “exclusive stamp for the data report” or the stamp of the TA. 2. Any copy of the test report is invalid if not re-marked with the “exclusive stamp for the test report” or the stamp of TA. 3. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 4. The test report is invalid if there is any evidence of erasure and/or falsification. 5. If there is any dissidence for the test report, please file objection to the test center within 15 days from the date of receiving the test report. 6. Normally, entrust test is only responsible for the samples that have undergone the test. 7. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permissions of TA. Address: Room4,No.399,Cailun Rd,Zhangjiang Hi-Tech Park, Pudong Shanghai,China Post code: 201203 Telephone: +86-021-50791141/2/3 Fax：+86-021-50791147 Website: http://www.ta-shanghai.com E-mail: [email protected] TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 3of 79 GENERAL SUMMARY Product CDMA 1X Digital Mobile Phone Model HUAWEI C223s Client HUAWEI Technologies Co., Ltd. Type of test Entrusted Manufacturer HUAWEI Technologies Co., Ltd. Arrival Date of sample Dec.25 th , 2007 Place of sampling (Blank) Carrier of the samples Yi Fang Quantity of the samples One Date of product (Blank) Base of the samples (Blank) Items of test SAR Series number 01610414084 Standard(s) EN 50360–2001: Product standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones. EN 50361–2001: Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones. ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE 1528–2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques. OET Bulletin 65 (Edition 97-01) and Supplement C (Edition 01-01): Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits. IEC 62209-1: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 1: Procedure to determine the Specific Absorption Rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz). Conclusion Localized Specific Absorption Rate (SAR) of this portable wireless equipment has been measured in all cases requested by the relevant standards cited in Clause 6.2 of this test report. Maximum localized SAR is below exposure limits specified in the relevant standards cited in Clause 6.1 of this test report. General Judgment: Pass (Stamp) Date of issue: Jan. 8 th , 2008 Comment TX Freq. Band:1851-1909MHz (CDMA) Max. Power: 0.25W(CDMA) The test result only responds to the measured sample. Approved by (Chenguang Zheng) Revised by (Weizhong Yang) Performed by (Feng Shi) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 4of 79 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES .............................................................................................. 6 2 GENERAL CONDITIONS ................................................................................................................ 6 3 DESCRIPTION OF EUT................................................................................................................... 6 3.1 ADDRESSING INFORMATION RELATED TO EUT.................................................................................................... 6 3.2 CONSTITUENTS OF EUT ...................................................................................................................................... 7 3.3 GENERAL DESCRIPTION....................................................................................................................................... 7 4 OPERATIONAL CONDITIONS DURING TEST............................................................................... 8 4.1 TEST TO BE PERFORMED...................................................................................................................................... 8 4.2 INFORMATION FOR THE MEASUREMENT OF CDMA 1X DEVICES........................................................................... 8 4.2.1 OUTPUT POWER VERIFICATION........................................................................................................................ 8 4.2.2 HEAD SAR MEASUREMENT.............................................................................................................................. 8 4.2.3 BODY SAR MEASUREMENT.............................................................................................................................. 9 5 SAR MEASUREMENTS SYSTEM CONFIGURATION.................................................................. 10 5.1 SAR MEASUREMENT SET-UP............................................................................................................................. 10 5.2 DASY4 E-FIELD PROBE SYSTEM........................................................................................................................ 11 5.3 E-FIELD PROBE CALIBRATION...............................................................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 56of 79 CDMA PCS Towards Ground Middle Communication System: CDMA PCS; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.5 mho/m; ε r = 53.4; ρ = 1000 kg/m 3 Probe: ET3DV6 - SN1737; ConvF(4.64, 4.64, 4.64); Electronics: DAE3 Sn452; Toward Ground Middle/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.561 mW/g Toward Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.4 V/m; Power Drift = -0.073 dB Peak SAR (extrapolated) = 0.836 W/kg SAR(1 g) = 0.515 mW/g; SAR(10 g) = 0.321 mW/g Maximum value of SAR (measured) = 0.555 mW/g Figure. 39 Body, Towards Ground, CDMA PCS Channel 600 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 57of 79 Figure. 40 Z-Scan at power reference point (Body, Towards Ground, CDMA PCS Channel 600) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 58of 79 CDMA PCS Towards Ground Low Communication System: CDMA PCS; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1852 MHz; σ = 1.46 mho/m; ε r = 53.5; ρ = 1000 kg/m 3 Probe: ET3DV6 - SN1737; ConvF(4.64, 4.64, 4.64); Electronics: DAE3 Sn452; Toward Ground Low/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.529 mW/g Toward Ground Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.7 V/m; Power Drift = -0.158 dB Peak SAR (extrapolated) = 0.752 W/kg SAR(1 g) = 0.471 mW/g; SAR(10 g) = 0.290 mW/g Maximum value of SAR (measured) = 0.503 mW/g Figure. 41 Body, Towards Ground, CDMA PCS Channel 25 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 59of 79 Figure. 42 Z-Scan at power reference point (Body, Towards Ground, CDMA PCS Channel 25) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 60of 79 ANNEX D： SYSTEM VALIDATION RESULTS System Performance Check at 1900 MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 541 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: Head1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.42 mho/m; ε r = 39.4; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(4.64, 4.64, 4.64); - Electronics: DAE3 Sn452; d=10mm, Pin=250mW/Area Scan (61x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 11.7 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7) /Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.4 V/m; Power Drift = -0.045 dB Peak SAR (extrapolated) = 16.8 W/kg SAR(1 g) = 9.69 mW/g; SAR(10 g) = 5.12 mW/g Maximum value of SAR (measured) = 10.9 mW/g 0 dB = 10.9mW/g Figure.43 System Performance Check 1900MHz 250mW TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 61of 79 ANNEX E： PROBE CALIBRATION CERTIFICATE TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 62of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 63of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 64of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 65of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 66of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 67of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 68of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 69of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 70of 79 ANNEX F： D1900V2 DIPOLE CALIBRATION CERTIFICATE TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 71of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 72of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 73of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 74of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 75of 79

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 76of 79 ANNEX G： THE EUT APPEARANCES AND TEST CONFIGURATION Picture 3: Constituents of the sample (Lithium Battery is in the Handset) Picture 4: Left Hand Touch Cheek Position TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 77of 79 Picture 5 : Left Hand Tilt 15 Degree Position Picture 6 : Right Hand Touch Cheek Position TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 78of 79 Picture 7: Right Hand Tilt 15 Degree Position Picture 8: Body, The EUT display towards ground, the distance from handset to the bottom of the Phantom is 15mm) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1404FCC Page 79of 79 Picture 9: Body, The EUT display towards the Phantom, the distance from handset to the bottom of the Phantom is 15mm)

FCC TEST REPORT OF CDMA 1X Digital Mobile Phone M/N: HUAWEI C223s Dec 28, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH(R)042122007EB-1 FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total40 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH(R)042122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total40 REPORT ON FCC TEST REPORT OF CDMA 1X Digital Mobile Phone M/N: HUAWEI C223s Report No: SYBH(R)042122007EB-1 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 10 items need to be tested, 10 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2007.12.28 Date Name signature Technical Responsibility For Area of Testing 2007.12.28 Date Name signature Test Lab Engineer 2007.12.28 Date Name signature Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 Report No: SYBH(R)042122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total40 Contents 1 Summary...........................................................................................................................................5 2 Product Description ........................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description ........................................................................................................................7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description .........................................................................................................................8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments ....................................................................................................................11 6 Transmitter Measurements ............................................................................................................12 6.1 EFFECTIVE ISOTROPIC RADIATED POWER OF TRANSMITTER (EIRP)....................................................... 12 6.2 CONDUCTED OUTPUT POWER............................................................................................................... 15 6.3 MODULATION CHARACTERISTICS.......................................................................................................... 17 6.4 OCCUPIED BANDWIDTH........................................................................................................................ 19 6.5 BAND EDGES COMPLIANCE.................................................................................................................. 21 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 23 6.7 RADIATED SPURIOUS RADIATION.......................................................................................................... 25 6.8 FREQUENCY STABILITY........................................................................................................................ 29 7 EMC Test .........................................................................................................................................33 7.1 CONDUCTED EMISSION AT POWER PORT.............................................................................................. 33 7.2 RADIATED EMISSION OF ENCLOSURE IN IDLE MODE...........................................................…

Text truncated - open the document above for the full version.

FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total3 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part24 Subpart E FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total3 PCS band: Channel 600TM1 FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total3 PCS band: Channel 600TM3

FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total5 Appendix B Occupied Bandwidth According to FCC Part 2.1049 & Part 24 Subpart E FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total5 PCS band: Channel 25TM1 FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total5 PCS band: Channel 25TM3 FCC ID: QISC223S Report No: SYBH(R)042122007EB-1 Confidential I…

Text truncated - open the document above for the full version.