QISC2299CDMA 2000 1X Handset

HUAWEI C2299 CDMA 1X Mobile Phone User Manual ii Copyright © 2006 Huawei Technologies Co., Ltd. All Rights Reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. i Table of Contents 1 Getting to Know Your Phone ....................................................... 1 About Your Phone .................................................................... 1 2 Getting Started ............................................................................... 4 Powering Your Phone On or Off .............................................. 4 Installing the Battery ................................................................ 4 Removing the Battery............................................................... 4 Installing/Removing the UIM Card.......................................... 5 Charging ................................................................................... 5 3 Call .................................................................................................. 6 Making a Call ........................................................................... 6 Answering a Call ...................................................................... 6 Available Operations During a Call.......................................... 6 4 Text Entry....................................................................................... 7 Input Modes .............................................................................. 7 Entering English ....................................................................... 7 Entering Numbers..................................................................... 8 Entering Symbols ..................................................................... 8 5 Message ........................................................................................... 8 Writing a Message .................................................................... 8 Inbox ......................................................................................... 9 Outbox .................................................................................... 10 Draftbox.................................................................................. 10 Voice Mail............................................................................... 11 Saving To ................................................................................ 11 Deleting All............................................................................. 11 ii Settings ................................................................................... 11 6 Contacts ........................................................................................ 12 Searching for a Contact .......................................................... 12 Adding a Contact .................................................................... 12 Groups .................................................................................... 13 Speed Dialing ......................................................................... 13 Copying All............................................................................. 13 Deleting All............................................................................. 14 Options.................................................................................... 14 7 Call Log......................................................................................... 14 Missed Calls ........................................................................... 14 Answered Calls/Dialed Calls.................................................. 15 Deleting All............................................................................. 15 Call Duration .......................................................................... 15 8 Extra.............................................................................................. 16 Alarm Clock ........................................................................... 16 Calendar.................................................................................. 16 Calculator................................................................................ 16 Stopwatch ............................................................................... 17 Time Zone............................................................................... 17 Games ..................................................................................... 18 9 Sound............................................................................................. 18 Adjusting the Volume ............................................................. 18 Setting the Alert Mode............................................................ 18 Setting a Ring Tone ................................................................ 19 Setting an Alarm Tone ............................................................ 19 Setting an SMS Receive Tone ................................................ 19 Setting an SMS Send Tone ..................................................... 19 iii Setting Other Tones ................................................................ 19 10 Settings........................................................................................ 20 Display.................................................................................... 20 Time and Date..............…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: EMCC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC2299 to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 December 25, 2006 RE: Huawei Technologies Co., Ltd FCC ID: QISC2299 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please provide an ATCB Form 731 application. 2.) There are many documents indicated as “Temporary Confidential”, but there is no Temp Confidential (or Short-Term Confidentiality) letter. This document is separate from the Standard Confidentiality request you are familiar with. Kindly review and provide separate Short Term Confidentiality letter if desired. 3.) FYI: Be sure the contact information associated with Grantee code QIS is current. 4.) This device appears, from the External Photographs, to have a USB port. Is this correct? If there is any method by which this phone can connect to a computer, there also must be a separate equipment authorization as a “Computer Peripheral” under either the Part 15B Certification process or the DofC. Please review and advise. 5.) Please clarify the Operational Description, page 2. What is the FM function? Do you mean this phone can provide analog AMPS-FM in addition to IS-95 CDMA? 6.) The Tune-Up specification needs to include RF power target tune-up values in addition to a procedure. All TCBs are required to be certain a device was set to the highest expected RF power settings before both EMC and SAR testing begin. 7.) FYI: Since the SAR testing was shown with Conducted power, it would be useful to show the conducted powers necessary to produce the radiated ERP results for Section 6.1.4. This will make it much easier to be certain the EUT was properly adjusted for maximum RF Pout. 8.) Please provide a complete listing of substitution data used for the radiated power test. This would include signal generator level, cable loss, antenna factors, SA readings including RBW/VBW settings etc. 9.) Your SAR values do not appear in Manual. Comments please. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. z Page 2 December 25, 2006 Any questions about the content of this correspondence should be directed to the sender.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 January 10, 2007 RE: Huawei Technologies Co., Ltd FCC ID: QISC2299 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Does the Applicant desire “Temporary Confidentiality”? There are many documents indicated as “Temporary Confidential”, but there is no Temporary Confidential This document is different from Standard Confidentiality. Provide separate Short Term Confidentiality letter if desired. 2.) Please provide a signed Form 731. 3.) The product description, section 2.1 confirms this device can connect to a computer with a data cable. Therefore, there also must be a separate equipment authorization as a “Computer Peripheral” under either Part 15B Certification process or DofC. Please review and advise. 4.) Section 2.5 of the Product Description indicates that this device is capable of +23dBm. The Tune Up procedure indicates +24.5dBm. The SAR report indicates a range of +24.6 to +23.9dBm. Appendix J shows +24.3 to +24.4dBm And the EMC report shows every channel puts out +24.4dBm. What is the correct power? I must have agreement to 10% accuracy to properly evaluate this device. All TCBs are required to be certain a device was set to the highest expected RF power settings. 5.) Please provide all data and calculations used for the radiated power test. All I have in Appendix 1 is a print out of an instrument display. This has no meaning without supporting calculations or data. Please include signal generator level, cable loss, antenna factors, SA readings including RBW/VBW settings etc. 6.) Please provide external attenuator settings and cable loss used for the Occupied Bandwidth, conducted Spurious Emissions plots, and the Band Edge plots. Are these correction values accounted in the plots presented? William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

HUAWEI C2299 CDMA Mobile Phone SECRET Page1,Total 6 External Photos of C2299 HUAWEI C2299 CDMA Mobile Phone SECRET Page2,Total 6 HUAWEI C2299 CDMA Mobile Phone SECRET Page3,Total 6 HUAWEI C2299 CDMA Mobile Phone SECRET Page4,Total 6 HUAWEI C2299 CDMA Mobile Phone SECRET Page5,Total 6 HUAWEI C2299 CDMA Mobile Phone SECRET Page6,Total 6

HUAWEI C2299 CDMA Mobile Station SECRET Page1, Total 1 ID Label Location_C2299

HUAWEI C2299 CDMA Mobile Station SECRET Page1, Total 1 ID Label _C2299

HUAWEI C2299 CDMA Mobile Phone SECRET Page1,Total 8 Internal Photos of C2299 HUAWEI C2299 CDMA Mobile Phone SECRET Page2,Total 8 HUAWEI C2299 CDMA Mobile Phone SECRET Page3,Total 8 HUAWEI C2299 CDMA Mobile Phone SECRET Page4,Total 8 HUAWEI C2299 CDMA Mobile Phone SECRET Page5,Total 8 HUAWEI C2299 CDMA Mobile Phone SECRET Page6,Total 8 HUAWEI C2299 CDMA Mobile Phone SECRET Page7,Total 8 HUAWEI C2299 CDMA Mobile Phone SECRET Page8,Total 8

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 2 of 79 Notes 1. . The test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 2. Copies of the test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 3. The test report shall be invalid if there are no signatures of the testing person, reviewing person and approving person on it. 4. The test report shall be invalid if it is altered. 5. Any demurral about the test shall be put forward to the testing organization within 15 days after the receiving of the test report. 6. This test report standalone dose not constitute or imply by its own an approval of the product by any Certification Authorities or Competent Bodies. 7. This report is only valid if complete, and test report shall not be reproduced except in full, without written approval of the laboratory. 8. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of Telecommunication Metrology Center of MII and the Accreditation Bodies, if it applies. Address:No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China (Telecommunication Metrology Center of MII) Post code: 100083 Telephone: +86 10 62302041Fax:+86 10 62304793 Web site: http://www.emcite.com E-mail: [email protected] Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 3 of 79 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES ............................................................................... 5 2 GENERAL CONDITIONS................................................................................................... 5 3 DESCRIPTION OF EUT...................................................................................................... 5 3.1 A DDRESSING INFORMATION RELATED TO EUT...................................................................... 5 3.2 C ONSTITUENTS OF EUT ........................................................................................................ 6 3.3 G ENERAL DESCRIPTION......................................................................................................... 7 4 OPERATIONAL CONDITIONS DURING TEST ............................................................. 7 4.1 S CHEMATIC TEST CONFIGURATION........................................................................................ 7 4.2 SAR M EASUREMENT SET-UP................................................................................................. 8 4.3 D ASY4 E-FIELDPROBE SYSTEM............................................................................................ 9 4.4 E- FIELD PROBE CALIBRATION............................................................................................. 10 4.5 O THER TEST EQUIPMENT.................................................................................................... 11 4.6 E QUIVALENT TISSUES.......................................................................................................... 11 4.7 S YSTEM SPECIFICATIONS..................................................................................................... 12 5 CHARACTERISTICS OF THE TEST ............................................................................. 12 5.1 A PPLICABLELIMIT REGULATIONS....................................................................................... 12 5.2 A PPLICABLEMEASUREMENT STANDARDS........................................................................... 12 6 LABORATORY ENVIRONMENT ................................................................................... 13 7 CONDUCTED OUTPUT POWER MEASUREMENT................................................... 13 7.1 S UMMARY........................................................................................................................... 13 7.2 C ONDUCTED POWER........................................................................................................... 13 8 TEST RESULTS .................................................................................................................. 14 8.1 D IELECTRIC PERFORMANCE................................................................................................ 14 8.2 S YSTEM VALIDATION........................................................................................................... 14 8.3 S UMMARY OF MEASUREMENT RESULTS (SLIDE DOWN) ....................................................... 15 8.4 S UMMARY OF MEASUREMENT RESULTS (SLIDE UP) ............................................................. 16 8.5 C ONCLUSION....................................................................................................................... 16 9 MEASUREMENT UNCERTAINTY ................................................................................. 16 10 MAIN TEST INSTRUMENTS......................................................................................... 17 11 TEST PERIOD................................................................................................................... 18 12 TEST LOCATION............................................................................................................. 18 ANNEX A MEASUREMENT PROCESS ............................................................................ 19 ANNEX B TEST LAYOUT ................................................................................................... 20 ANNEX C GRAPH RESULTS.............................................................................................. 24 ANNEX D SYSTEM VALIDATION RESULTS.................................................................. 64 ANNEX E PROBE CALIBRATION CERTIFICATE........................................................ 65 ANNEX F DIPOLE CALIBRATION CERTIFICATE..............................................…

Text truncated - open the document above for the full version.

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 41 of 79 Fig. 18 Z-Scan at power reference point (CDMA 835MHz CH1013) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 42 of 79 CDMA 1X Right Tilt High Date/Time: 2006-11-23 13:42:50 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.563 mW/g Tilt High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.0 V/m; Power Drift = -0.183 dB Peak SAR (extrapolated) = 0.645 W/kg SAR(1 g) = 0.493 mW/g; SAR(10 g) = 0.342 mW/g Maximum value of SAR (measured) = 0.527 mW/g   0 dB = 0.527mW/g Fig. 19 Right Hand Tilt 15°CDMA 835MHz CH777 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 43 of 79 Fig. 20 Z-Scan at power reference point (CDMA 835MHz CH777) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 44 of 79 CDMA 1X Right Tilt Middle Date/Time: 2006-11-23 13:13:21 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.279 mW/g Tilt Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.0 V/m; Power Drift = -0.153 dB Peak SAR (extrapolated) = 0.329 W/kg SAR(1 g) = 0.250 mW/g; SAR(10 g) = 0.173 mW/g Maximum value of SAR (measured) = 0.267 mW/g   0 dB = 0.267mW/g Fig. 21 Right Hand Tilt 15°CDMA 835MHz CH384 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 45 of 79 Fig. 22 Z-Scan at power reference point (CDMA 835MHz CH384) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 46 of 79 CDMA 1X Right Tilt Low Date/Time: 2006-11-23 12:46:50 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.212 mW/g Tilt Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.1 V/m; Power Drift = -0.191 dB Peak SAR (extrapolated) = 0.239 W/kg SAR(1 g) = 0.182 mW/g; SAR(10 g) = 0.127 mW/g Maximum value of SAR (measured) = 0.193 mW/g   0 dB = 0.193mW/g Fig. 23 Right Hand Tilt 15°CDMA 835MHz CH1013 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 47 of 79 Fig. 24 Z-Scan at power reference point (CDMA 835MHz CH1013) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 48 of 79 CDMA 1X Body Toward Phantom High Date/Time: 2006-11-23 14:55:03 Electronics: DAE3 Sn536 Medium: 835 Body Medium parameters used (interpolated): ı = 0.95 mho/m; İ r = 55.6; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.8 o C Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.45, 6.45, 6.45) Toward Phantom High/Area Scan (71x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.373 mW/g Toward Phantom High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.9 V/m; Power Drift = -0.183 dB Peak SAR (extrapolated) = 0.412 W/kg SAR(1 g) = 0.320 mW/g; SAR(10 g) = 0.229 mW/g Maximum value of SAR (measured) = 0.340 mW/g   0 dB = 0.340mW/g Fig. 25 CDMA 835MHz, Body, Towards Phantom, CH777 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 49 of 79 Fig. 26 Z-Scan at power reference point (CDMA 835MHz, Body,Towards Phantom, CH777) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 50 of 79 CDMA 1X Body Toward Phantom Middle Date/Time: 2006-11-23 15:19:44 Electronics: DAE3 Sn536 Medium: 835 Body Medium parameters used (interpolated): ı = 0.95 mho/m; İ r = 55.6; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.8 o C Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.45, 6.45, 6.45) Toward Phantom Middle/Area Scan (71x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.198 mW/g Toward Phantom Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.9 V/m; Power Drift = -0.176 dB Peak SAR (extrapolated) = 0.216 W/kg SAR(1 g) = 0.169 mW/g; SAR(10 g) = 0.121 mW/g Maximum value of SAR (measured) = 0.180 mW/g   0 dB = 0.180mW/g Fig. 27 CDMA 835MHz, Body, Towards Phantom, CH384 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 51 of 79 Fig. 28 Z-Scan at power reference point (CDMA 835MHz, Body, Towards Phantom, CH384) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E01938Page 52 of 79 CDMA 1X Body Toward Phantom Low Date/Time: 2006-11-23 15:47:18 Electronics: DAE3 Sn536 Medium: 835 Body Medium parameters used (interpolated): ı = 0.95 mho/m; İ r = 55.6; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.8 o C Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.45…

Text truncated - open the document above for the full version.

Report No: SYBH(E) 54112006 FCC ID: QISC2299 FCC TEST REPORT OF HUAWEI CDMA 800MHz Mobile Phone M/N: C2299 Dec. 16, 2006 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH(E)54112006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH(E)54112006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total37 Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HUAWEI CDMA Mobile Phone M/N: C2299 Report No: SYBH (E) 54112006 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 9 items need to be tested, 9 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2006.12.10 Tang Shuanli Date Name signature Technical Responsibility For Area of Testing 2006.12.10 Zhang Xinghai Date Name signature Test Lab Engineer 2006.12.10 Deng Jiang Date Name signature Report No: SYBH(E)54112006 Confidential Information of HUAWEI. No Distribution without Permission Page4, Total37 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..............…

Text truncated - open the document above for the full version.