QISC2600CDMA Phone

C2600 CDMA 1X Mobile Phone User Guide and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: +86-755-28780808 Global Hotline: +86-755-28560808 E-mail: mobile@huawei. com We bsi te: www.huawei.com Version: V100R001C16_01 BOM: 31017164 1 Your Phone Screen Navigation Keys Left Soft Key Talk /Send Key Number Keys Vibrate Only Profile Key Charger Interface /Headset Jack Speaker Keyguard Key OK Key End /Power Ke y Right Soft Key Earpiece 2 Keys and Functions Press... To... z View the dialed calls in the standby mode. z Make or answer a call. z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the home screen. z Display the UNI interface in the standby mode. z Accept a selection. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. z Display the Magic interface (), the Messages interface ( ), the Scheduler interface (), and the Alarm interface () in the standby mode. z Increase the volume () or decrease the volume ( ) during a call. 3 Press... To... – z Enter numbers and characters. z Speed-dial phone numbers in the standby mode (by pressing and holding the 1-9 keys). z Select a submenu item labeled with the corresponding number. z Enter the * symbol. z Enable or disable the vibrate only profile (by pressing and holding it). z Provide different functions according to the phone features being used. z Enter the # symbol. z Lock the keypad in the standby mode (by pressing and holding it). z Provide different functions according to the phone features being used. Screen Icons Icon Description IconDescription Network signal strength Battery power level Calling Alarm clock on Keypad locked Silent profile Message received Memory for messages full(Icon blinks) Vibrate Only profile 4 Menu Tree 1MissedCalls 2ReceivedCalls 3DialedCalls 4 Call Duration 5DeleteAll 1 Write Message 2 Inbox 3 Outbox 4Draft 5 Voice Mail 6 Me ssage Se ttings 7DeleteAll Se t t ings 1 Search 2 Add New 3Groups 4 Speed Dial 5 Copy All 6 DeleteAll 7 My Phone No. 8 Memory Sta tus 1 Recorder 2Alarm 3Scheduler 4 Calculator 5Gallery 6Line Game 1 General 2 Vibrate Only 3 Silent 4 Outdoor 1Display 2 Call Settings 3 Phone Settings 4 Security 1 Magic 2 Info UNI Call History Phone B ook Messages Profiles Fun & Ut ility 5 Installing the UIM Card and Battery Consult the network operator if a UIM card is needed. Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. Removing the Battery and UIM Card Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. Make sure that the arrow on the charger connector faces the front side of the phone. 2. Connect the charger to an AC power socket. 3. During the charging, the charging icon in the animated status is displayed. 4. When the charging icon becomes statistic, the phone is fully charged. Disconnect the charger from the AC power socket. 5. Press the gray buttons on both sides of the charger connector inwards to disconnect the charger from the phone. 6 Using the Function Menu 1. In the standby mode, press to display the Menu interface. 2. Press to scroll to a menu item. 3. Press (Select) to display the menu. 4. Display the submenu in either of the ways: ¾ Press to scroll to a submenu item and press (Select) to display the submenu. ¾ Press the number key corresponding to the number of a submenu to display it. 5. Press (Back) to return to the previous menu or quit the function menu. Press to return to the home screen. Making a Call 1. In the standby mode, enter a phone number. 2. Press to dial the number. 3. Press to end the call. Note z When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. z In the standby mode, press to view the dialed calls. Select a record and press to dial. z Select a contact from the phonebook and press to dial. 7 Answering a Call When there is an incoming call, you can press , (Answer) to answer it, or press to reject it. z If the any-key answer function is enabled, you can press any key except and to answer an incoming call. z If the headset auto answer function is enabled, and the headset is connected to the phone, the incoming call is answered automatically. Note If the headset is connected to the phone, you can press the button on the headset cable to answer or end a call. Phone Lock The phone lock protects your phone from unauthorized use. The default phone lock code is 000000. You can change it into any numeric string of 4 to 8 digits. If the phone lock is enabled, you need to enter the correct phone lock code when the phone is powered on. PIN and PUK The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unlocking key (PUK) can unblock the blocked PIN. Both PIN and PUK are delivered with the UIM card. For details, consult your service provider. If you enter wrong PINs three times consecutively, the phone asks you to enter the PUK code. If you enter wrong PUKs ten times, the UIM card is invalidated permanently. Contact your service provider for a new card. 8 Locking the Keypad In the standby mode, press and hold to lock the keypad. When the keypad is locked, you can press to answer an incoming call or make emergency calls. You can press and to unlock the…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC2600 to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: TUV Rheinland (Shenzhen) Co., Ltd. Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2007-01-10 To whom it may concern: We the undersigned, hereby authorize TUV Rheinland (Shenzhen) Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TUV Rheinland (Shenzhen) Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI C2600 CDMA Handset SECRET Page1,Total 6 External Photo of HUAWEI C2600 HUAWEI C2600 CDMA Handset SECRET Page2,Total 6 HUAWEI C2600 CDMA Handset SECRET Page3,Total 6 HUAWEI C2600 CDMA Handset SECRET Page4,Total 6 HUAWEI C2600 CDMA Handset SECRET Page5,Total 6 HUAWEI C2600 CDMA Handset SECRET Page6,Total 6

HUAWEI C2600 CDMA Handset SECRET Page1, Total 1 Label Location_C2600

HUAWEI C2600 CDMA Handset SECRET Page1, Total 1 Label of C2600

HUAWEI C2600 CDMA Handset SECRET Page1,Total 4 Internal Photo of HUAWEI C2600 HUAWEI C2600 CDMA Handset SECRET Page2,Total 4 HUAWEI C2600 CDMA Handset SECRET Page3,Total 4 HUAWEI C2600 CDMA Handset SECRET Page4,Total 4

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 2 of 73 Notes 1. . The test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 2. Copies of the test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 3. The test report shall be invalid if there are no signatures of the testing person, reviewing person and approving person on it. 4. The test report shall be invalid if it is altered. 5. Any demurral about the test shall be put forward to the testing organization within 15 days after the receiving of the test report. 6. This test report standalone dose not constitute or imply by its own an approval of the product by any Certification Authorities or Competent Bodies. 7. This report is only valid if complete, and test report shall not be reproduced except in full, without written approval of the laboratory. 8. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of Telecommunication Metrology Center of MII and the Accreditation Bodies, if it applies. Address:No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China (Telecommunication Metrology Center of MII) Post code: 100083 Telephone: +86 10 62302041Fax:+86 10 62304793 Web site: http://www.emcite.com E-mail: [email protected] Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 3 of 73 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES ............................................................................... 5 2 GENERAL CONDITIONS................................................................................................... 5 3 DESCRIPTION OF EUT...................................................................................................... 5 3.1 A DDRESSING INFORMATION RELATED TO EUT...................................................................... 5 3.2 C ONSTITUENTS OF EUT ........................................................................................................ 6 3.3 G ENERAL DESCRIPTION......................................................................................................... 6 4 OPERATIONAL CONDITIONS DURING TEST ............................................................. 7 4.1 S CHEMATIC TEST CONFIGURATION........................................................................................ 7 4.2 SAR M EASUREMENT SET-UP................................................................................................. 8 4.3 D ASY4 E-FIELDPROBE SYSTEM............................................................................................ 8 4.4 E- FIELD PROBE CALIBRATION............................................................................................... 9 4.5 O THER TEST EQUIPMENT.................................................................................................... 10 4.5.2 P HANTOM......................................................................................................................... 10 4.6 E QUIVALENT TISSUES.......................................................................................................... 10 4.7 S YSTEM SPECIFICATIONS..................................................................................................... 11 5 CHARACTERISTICS OF THE TEST ............................................................................. 11 5.1 A PPLICABLELIMIT REGULATIONS....................................................................................... 11 5.2 A PPLICABLEMEASUREMENT STANDARDS........................................................................... 12 6 LABORATORY ENVIRONMENT ................................................................................... 12 7 CONDUCTED OUTPUT POWER MEASUREMENT................................................... 12 7.1 S UMMARY........................................................................................................................... 12 7.2 C ONDUCTED POWER........................................................................................................... 12 8 TEST RESULTS .................................................................................................................. 13 8.1 D IELECTRIC PERFORMANCE................................................................................................ 13 8.2 S YSTEM VALIDATION........................................................................................................... 13 8.3 S UMMARY OF MEASUREMENT RESULTS (SLIDE DOWN) ....................................................... 14 8.4 C ONCLUSION....................................................................................................................... 15 9 MEASUREMENT UNCERTAINTY ................................................................................. 15 10 MAIN TEST INSTRUMENTS......................................................................................... 16 11 TEST PERIOD................................................................................................................... 16 12 TEST LOCATION............................................................................................................. 16 ANNEX A MEASUREMENT PROCESS ............................................................................ 17 ANNEX B TEST LAYOUT ................................................................................................... 18 ANNEX C GRAPH RESULTS.............................................................................................. 22 ANNEX D SYSTEM VALIDATION RESULTS.................................................................. 58 ANNEX E PROBE CALIBRATION CERTIFICATE........................................................ 59 ANNEX F DIPOLE CALIBRATION CERTIFICATE..................…

Text truncated - open the document above for the full version.

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 33 of 73 Fig. 12 Z-Scan at power reference point (CDMA 835MHz CH1013) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 34 of 73 CDMA 1X Right Cheek High Date/Time: 2006-12-14 14:58:59 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.885 mW/g Cheek High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.8 V/m; Power Drift = -0.200 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.783 mW/g; SAR(10 g) = 0.523 mW/g Maximum value of SAR (measured) = 0.791 mW/g   0 dB = 0.791mW/g Fig. 13 Right Hand Touch Cheek CDMA 835MHz CH777 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 35 of 73 Fig. 14 Z-Scan at power reference point (CDMA 835MHz CH777) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 36 of 73 CDMA 1X Right Cheek Middle Date/Time: 2006-12-14 14:36:25 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.05 mW/g Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.5 V/m; Power Drift = -0.145 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.926 mW/g; SAR(10 g) = 0.624 mW/g Maximum value of SAR (measured) = 0.928 mW/g   0 dB = 0.928mW/g Fig.15 Right Hand Touch Cheek CDMA 835MHz CH384 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 37 of 73 Fig. 16 Z-Scan at power reference point (CDMA 835MHz CH384) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 38 of 73 CDMA 1X Right Cheek Low Date/Time: 2006-12-14 15:21:46 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.530 mW/g Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.2 V/m; Power Drift = 0.096 dB Peak SAR (extrapolated) = 0.651 W/kg SAR(1 g) = 0.485 mW/g; SAR(10 g) = 0.330 mW/g Maximum value of SAR (measured) = 0.488 mW/g   0 dB = 0.488mW/g Fig. 17 Right Hand Touch Cheek CDMA 835MHz CH1013 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 39 of 73 Fig. 18 Z-Scan at power reference point (CDMA 835MHz CH1013) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 40 of 73 CDMA 1X Right Tilt High Date/Time: 2006-12-14 15:09:30 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.432 mW/g Tilt High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.6 V/m; Power Drift = 0.109 dB Peak SAR (extrapolated) = 0.535 W/kg SAR(1 g) = 0.396 mW/g; SAR(10 g) = 0.269 mW/g Maximum value of SAR (measured) = 0.401 mW/g   0 dB = 0.401mW/g Fig. 19 Right Hand Tilt 15°CDMA 835MHz CH777 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 41 of 73 Fig. 20 Z-Scan at power reference point (CDMA 835MHz CH777) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 42 of 73 CDMA 1X Right Tilt Middle Date/Time: 2006-12-14 14:46:53 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.525 mW/g Tilt Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.4 V/m; Power Drift = -0.176 dB Peak SAR (extrapolated) = 0.637 W/kg SAR(1 g) = 0.481 mW/g; SAR(10 g) = 0.330 mW/g Maximum value of SAR (measured) = 0.492 mW/g   0 dB = 0.492mW/g Fig. 21 Right Hand Tilt 15°CDMA 835MHz CH384 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 43 of 73 Fig. 22 Z-Scan at power reference point (CDMA 835MHz CH384) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02030Page 44 of 73 CDMA 1X Right Tilt Low Date/Time: 2006-12-14 15:32:01 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolat…

Text truncated - open the document above for the full version.

FCC TEST REPORT OF Huawei CDMA Mobile Phone M/N: C2600 Jan. 29, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH(R)48122006 FCC ID:QISC2600 Report No: SYBH(R)48122006 Confidential Information of Huawei. No Distribution without Permission Page2, Total40 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH(R)48122006 Confidential Information of Huawei. No Distribution without Permission Page3, Total40 REPORT ON FCC Test of Huawei CDMA Mobile Phone M/N: C2600 Report No: SYBH(R)48122006 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 9 items need to be tested, 9 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2006.02.10 Tang Shuanli Date Name signature Technical Responsibility For Area of Testing 2006.02.10 Zhang Xinghai Date Name signature Test Lab Engineer 2006.02.10 Deng Jiang Date Name signature Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 Report No: SYBH(R)48122006 Confidential Information of Huawei. No Distribution without Permission Page4, Total40 Contents 1 Summary ..............................................................................................................................................5 2 Product Description.............................................................................................................................6 2.1 PRODUCTION INFORMATION...............................................................................................................6 2.2 MODIFICATION INFORMATION.............................................................................................................6 3 Test Site Description............................................................................................................................7 3.1 TESTING PERIOD..............................................................................................................................7 3.2 GENERAL SET UP DESCRIPTION.........................................................................................................7 4 Product Description .............................................................................................................................8 4.1 TECHNICAL CHARACTERISTICS...........................................................................................................8 4.2 EUT IDENTIFICATION LIST...............................................................................................................10 5 Main Test Instruments........................................................................................................................11 6 Transmitter Measurements.................................................................................................................13 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................13 6.2 MODULATION CHARACTERISTICS........................................................................................................6 6.3 OCCUPIED BANDWIDTH...................................................................................................................10 6.4 BAND EDGES COMPLIANCE..............................................................................................................12 6.5 SPURIOUS EMISSION AT ANTENNA TERMINAL.....................................................................................14 6.6 RADIATED SPURIOUS RADIATION......................................................................................................16 6.7 FREQUENCY STABILITY...................................................................................................................20 7 EMC Test ............................................................................................................................................24 7.1 CONDUCTED EMISSION AT POWER PORT..........................................................................................24 7.2 RADIATED EMISSION OF ENCLOSURE IN IDEAL MODE...........................................................................27 8 System Measurement Uncertainty ......................................................................................................29 9 Appendixes....................................…

Text truncated - open the document above for the full version.

FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total3 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total3 Channel 283（TM1） FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of Huawei. No Distribution without Permission Page3, Total3 Channel 283（TM3） FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total5 Appendix B Occupied Bandwidth According to FCC Part 2.1049 & Part 22 Subpart H FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total5 Channel 1013（TM1） MS,1X,C0 :OCC BANDWDT A TDF Att 5 dB ** Ref 15.2 dBm 1 RM MAXH Center 824.7 MHzSpan 3.77266176 MHz377.266176 kHz/ * * RBW 10 kHz VBW 300 kHz SWT 100 ms * -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] -10.18 dBm 824.718137797 MHz OBW 1.287783582 MHz T1 Temp 1 [T1 OBW] -18.27 dBm 824.059131175 MHz T2 Temp 2 [T1 OBW] -18.76 dBm 825.346914757 MHz Date: 6.JAN.2007 13:13:17 FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total5 Channel 1013（TM3） MS,1X,C0 :OCC BANDWDT A TDF Att 5 dB ** Ref 15.2 dBm Center 824.7 MHzSpan 3.77266176 MHz377.266176 kHz/ * * RBW 10 kHz VBW 300 kHz SWT 100 ms * 1 RM AVG -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] -18.05 dBm 824.718137797 MHz OBW 1.287783582 MHz T1 Temp 1 [T1 OBW] -25.14 dBm 824.059131175 MHz T2 Temp 2 [T1 OBW] -25.07 dBm 825.346914757 MHz Date: 6.JAN.2007 13:16:26 FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page4, Total5 Channel 777（TM1） MS,1X,C0 :OCC BANDWDT A TDF Att 5 dB ** Ref 15.2 dBm Center 848.28 MHzSpan 3.77266176 MHz377.266176 kHz/ * * RBW 10 kHz VBW 300 kHz SWT 100 ms * 1 RM MAXH -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] -7.09 dBm 848.140943557 MHz OBW 1.275691717 MHz T1 Temp 1 [T1 OBW] -11.31 dBm 847.669360837 MHz T2 Temp 2 [T1 OBW] -10.78 dBm 848.945052554 MHz Date: 6.JAN.2007 13:12:10 FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page5, Total5 Channel 777（TM3） MS,1X,C0 :OCC BANDWDT A TDF Att 5 dB ** Ref 15.2 dBm Center 848.28 MHzSpan 3.77266176 MHz377.266176 kHz/ * * RBW 10 kHz VBW 300 kHz SWT 100 ms * 1 RM AVG -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] -9.20 dBm 847.995841182 MHz OBW 1.275691717 MHz T1 Temp 1 [T1 OBW] -15.76 dBm 847.669360837 MHz T2 Temp 2 [T1 OBW] -16.96 dBm 848.945052554 MHz Date: 6.JAN.2007 13:17:55 FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total5 Appendix C Band Edges Compliance According to FCC Part 2.1051 & 22.917 FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total5 TM1 Left Edge Channel 1013 FCC ID: QISC2600 Report No: SYBH(R)48122006 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total5 Right Edge Channel 777 FCC ID: QISC2600 Report No: SYB…

Text truncated - open the document above for the full version.