QISC2606Mobile Phone

C2606 CDMA 1X Mobile Phone Copyright © 2007 Huawei Technologies Co., Ltd. and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Te l : +86-755-28780808 Global Hotline: +86-755-28560808 Website: www.huawei.com E-mail: [email protected] 1 Your Phone Screen Navigation Keys Left Soft Key Talk /Send Key Number Keys Key Charger Interface Microphone Key OK Key E n d / P o w e r K e y Right Soft Key Earpiece Keys and Functions 2 Press... To... z View the dialled calls in the standby mode. z Make or answer a call. z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the home screen. Confirm a selection. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. z Display the Profiles interface (), the Messages interface ( ), the Scheduler interface ( ), and the Alarm interface () in the standby mode. z Increase the volume () or (), decrease the volume ( )or () during a call. – z Enter numbers and characters. z Speed-dial phone numbers in the standby mode (by pressing and holding the 1-9 keys). z Select a submenu item labeled with the corresponding number. 3 Press... To... z Enter the * symbol. z Enable or disable the Meeting profile (by pressing and holding it). z Provide different functions according to the phone features being used. z Enter the # symbol. z Lock the keypad in the standby mode (by pressing and holding it). z Provide different functions according to the phone features being used. Screen Icons Icon Description IconDescription Network signal strength Battery power level Calling Alarm clock on Keypad locked Silent profile Message received Memory for messages full(Icon blinks) Meeting profile 4 Menu Tree 1MissedCalls 2 Received Calls 3 Dialled Ca lls 4 Call Duration 5 Delete All 1 Write Message 2 Inbox 3 Outbox 4Draft 5 Voice Mail 6MessageSettings 7 Delete All Se tt ings 1 Search 2 Add New 3Groups 4 Speed Dial 5Copy All (*) 6 Delete All 7My PhoneNo. 8MemoryStatus 1 Recorder 2Alarm 3Scheduler 4 Calculator 6 World Clock 9 Smash Game 1 General 2 Meeting 3 Silent 4 Outdoor 1Display 2 Call Settings 3 Phone Settings 4 Security Call History Phone B ook Me ssages Profiles Fun & Utility 7Gallery 8Line Game 5 Stopwatch Copy All (*): If the UIM card is available, the Copy All submenu item is displayed under the Phone Book item. 1MissedCalls 2 Received Calls 3 Dialled Ca lls 4 Call Duration 5 Delete All 1 Write Message 2 Inbox 3 Outbox 4Draft 5 Voice Mail 6MessageSettings 7 Delete All Se tt ings 1 Search 2 Add New 3Groups 4 Speed Dial 5Copy All (*) 6 Delete All 7My PhoneNo. 8MemoryStatus 1 Recorder 2Alarm 3Scheduler 4 Calculator 6 World Clock 9 Smash Game 1 General 2 Meeting 3 Silent 4 Outdoor 1Display 2 Call Settings 3 Phone Settings 4 Security Call History Phone B ook Me ssages Profiles Fun 1MissedCalls 2 Received Calls 3 Dialled Ca lls 4 Call Duration 5 Delete All 1 Write Message 2 Inbox 3 Outbox 4Draft 5 Voice Mail 6MessageSettings 7 Delete All Se tt ings 1 Search 2 Add New 3Groups 4 Speed Dial 5Copy All (*) 6 Delete All 7My PhoneNo. 8MemoryStatus 1 Recorder 2Alarm 3Scheduler 4 Calculator 6 World Clock 9 Smash Game 1 General 2 Meeting 3 Silent 4 Outdoor 1Display 2 Call Settings 3 Phone Settings 4 Security Call History Phone B ook Me ssages Profiles Fun & Utility 7Gallery 8Line Game 5 Stopwatch Copy All (*): If the UIM card is available, the Copy All submenu item is displayed under the Phone Book item. 5 Installing the UIM Card and Battery Consult the network operator whether a UIM card is needed. Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. b a Removing the Battery and UIM Card Make sure that your phone is powered off. b a Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. Make sure that the arrow on the charger connector faces the front side of the phone. 2. Connect the charger to an AC power socket. 3. During the charging, the charging icon is displaying in animation. 6 4. When the charging icon becomes static, the battery is fully charged. Disconnect the charger from the AC power socket. 5. Press the gray buttons on both sides of the charger connector inwards to disconnect the charger from the phone. Using the Function Menu 1. In the standby mode, press (Menu) to display the Menu interface. 2. Press or to scroll to a menu item. 3. Press (Select) or to display the menu. 4. Display the submenu in either of the ways: z Press or to scroll to a submenu item and press (Select) or to display the submenu. z Press the number key corresponding to the number of a submenu to display it. 5. Press (Back) to return to the previous menu or quit the function menu. Press to return to the home screen. Making a Call 1. In the standby mode, enter a phone number. z To make an international call, press and hold to enter the international long distance code of "+". Then enter the number to be dialled, in the format of "country code + region code + phone number". 7 z To call a number with an extension, press and hold to insert "P", or press and hold to insert "T" between the phone number and the extension number. 2. Press to dial the number. 3. Press to end the call. Note z When the phone is locked, enter the lock code to unlock the phone fir…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: EMCC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC2606 to be kept confidential: 1. Schematic diagram 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2007-12-25 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISC2606 Product Name: CDMA 1X Digital Mobile Phone Product Model: C2606 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to EMCC should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify EMCC with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify EMCC in the event the information regarding the product of the product is made available to the public. EMCC will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely,

HUAWEI C2606 CDMA Handset SECRET Page1,Total 5 External Photo of HUAWEI C2606 HUAWEI C2606 CDMA Handset SECRET Page2,Total 5 HUAWEI C2606 CDMA Handset SECRET Page3,Total 5 HUAWEI C2606 CDMA Handset SECRET Page4,Total 5 HUAWEI C2606 CDMA Handset SECRET Page5,Total 5

HUAWEI C2606 CDMA Handset SECRET Page1, Total 1 Label Location_C2606

HUAWEI C2606 CDMA Handset SECRET Page1, Total 1 Label_C2606

HUAWEI C2606 CDMA Handset SECRET Page1,Total 5 Internal Photo of HUAWEI C2606 HUAWEI C2606 CDMA Handset SECRET Page2,Total 5 HUAWEI C2606 CDMA Handset SECRET Page3,Total 5 HUAWEI C2606 CDMA Handset SECRET Page4,Total 5 HUAWEI C2606 CDMA Handset SECRET Page5,Total 5

NO.: RZA2007-1042 TEST REPORT Test name Electromagnetic Field (Specific Absorption Rate) Product CDMA 1X Digital Mobile Telephone Model HUAWEI C2606 FCC ID QISC2606 Client HUAWEI Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 2of 79 GENERAL TERMS 1. The test report is invalid if not marked with “exclusive stamp for the data report” or the stamp of the TA. 2. Any copy of the test report is invalid if not re-marked with the “exclusive stamp for the test report” or the stamp of TA. 3. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 4. The test report is invalid if there is any evidence of erasure and/or falsification. 5. If there is any dissidence for the test report, please file objection to the test center within 15 days from the date of receiving the test report. 6. Normally, entrust test is only responsible for the samples that have undergone the test. 7. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permissions of TA. Address: Room4,No.399,Cailun Rd,Zhangjiang Hi-Tech Park, Pudong Shanghai,China Post code: 201203 Telephone: +86-021-50791141/2/3 Fax：+86-021-50791147 Website: http://www.ta-shanghai.com E-mail: [email protected] TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 3of 79 GENERAL SUMMARY Product CDMA 1X Digital Mobile Telephone Model HUAWEI C2606 Client HUAWEI Technologies Co., Ltd. Type of test Entrusted Manufacturer HUAWEI Technologies Co., Ltd. Arrival Date of sample Oct.25 th , 2007 Place of sampling (Blank) Carrier of the samples Yaohui Gu Quantity of the samples One Date of product (Blank) Base of the samples (Blank) Items of test SAR Series number 0FCB7CBC Standard(s) EN 50360–2001: Product standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones. EN 50361–2001: Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones. ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE 1528–2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques. OET Bulletin 65 (Edition 97-01) and Supplement C (Edition 01-01): Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits. IEC 62209-1: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 1: Procedure to determine the Specific Absorption Rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) Conclusion Localized Specific Absorption Rate (SAR) of this portable wireless equipment has been measured in all cases requested by the relevant standards cited in Clause 6.2 of this test report. Maximum localized SAR is below exposure limits specified in the relevant standards cited in Clause 6.1 of this test report. General Judgment: Pass (Stamp) Date of issue: Nov. 5 th , 2007 Comment TX Freq. Band: 824–849MHz (CDMA) Max. Power: 0.25W(CDMA) The test result only responds to the measured sample. Approved by Revised by Performed by TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 4of 79 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES ............................................................................................... 6 2 GENERAL CONDITIONS................................................................................................................. 6 3 DESCRIPTION OF EUT................................................................................................................... 6 3.1 ADDRESSING INFORMATION RELATED TO EUT.................................................................................................... 6 3.2 CONSTITUENTS OF EUT ...................................................................................................................................... 7 3.3 GENERAL DESCRIPTION....................................................................................................................................... 7 4 OPERATIONAL CONDITIONS DURING TEST ............................................................................... 8 4.1 TEST TO BE PERFORMED...................................................................................................................................... 8 4.2 INFORMATION FOR THE MEASUREMENT OF CDMA 1X DEVICES........................................................................... 8 4.2.1 OUTPUT POWER VERIFICATION........................................................................................................................ 8 4.2.2 HEAD SAR MEASUREMENT.............................................................................................................................. 9 4.2.3 BODY SAR MEASUREMENT.............................................................................................................................. 9 5 SAR MEASUREMENTS SYSTEM CONFIGURATION .................................................................. 10 5.1 SAR MEASUREMENT SET-UP............................................................................................................................. 10 5.2 DASY4 E-FIELD PROBE SYSTEM........................................................................................................................ 11 5.3 E-FIELD PROBE CALIBRATION........................................................................................................................... 12 5.4 OTHER TEST EQUIPMENT.…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 41of 79 Figure 24 Z-Scan at power reference point (Right Hand Touch Cheek CDMA Cellular Channel1013) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 42of 79 CDMA Cellular Right Tilt High Communication System: CDMA Cellular; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium: Head 835MHz Medium parameters used (interpolated): f = 848.31 MHz; σ = 0.953 mho/m; ε r = 42; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(6.85, 6.85, 6.85); - Electronics: DAE3 Sn452; Tilt High/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.320 mW/g Tilt High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.2 V/m; Power Drift = -0.141 dB Peak SAR (extrapolated) = 0.432 W/kg SAR(1 g) = 0.325 mW/g; SAR(10 g) = 0.228 mW/g Maximum value of SAR (measured) = 0.347 mW/g Figure 25 Right Hand Tilt 15° CDMA Cellular Channel 777 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 43of 79 Figure 26 Z-Scan at power reference point (Right Hand Tilt 15° CDMA Cellular Channel 777) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 44of 79 CDMA Cellular Right Tilt Middle Communication System: CDMA Cellular; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Head 835MHz Medium parameters used: f = 837 MHz; σ = 0.941 mho/m; ε r = 42.1; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(6.85, 6.85, 6.85); - Electronics: DAE3 Sn452; Tilt Middle/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.535 mW/g Tilt Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.0 V/m; Power Drift = 0.120 dB Peak SAR (extrapolated) = 0.702 W/kg SAR(1 g) = 0.532 mW/g; SAR(10 g) = 0.376 mW/g Maximum value of SAR (measured) = 0.569 mW/g Figure 27 Right Hand Tilt 15° CDMA Cellular Channel 384 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 45of 79 Figure28 Z-Scan at power reference point (Right Hand Tilt 15° CDMA Cellular Channel 384) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 46of 79 CDMA Cellular Right Tilt Low Communication System: CDMA Cellular; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: Head 835MHz Medium parameters used: f = 825 MHz; σ = 0.925 mho/m; ε r = 42.2; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(6.85, 6.85, 6.85); - Electronics: DAE3 Sn452; Tilt Low/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.183 mW/g Tilt Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.9 V/m; Power Drift = -0.154 dB Peak SAR (extrapolated) = 0.236 W/kg SAR(1 g) = 0.180 mW/g; SAR(10 g) = 0.128 mW/g Maximum value of SAR (measured) = 0.192 mW/g Figure 29 Right Hand Tilt 15° CDMA Cellular Channel 1013 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 47of 79 Figure 30 Z-Scan at power reference point (Right Hand Tilt 15° CDMA Cellular Channel 1013) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 48of 79 CDMA Cellular Towards Phantom High Communication System: CDMA Cellular; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium: Body 835MHz Medium parameters used (interpolated): f = 848.31 MHz; σ = 1 mho/m; ε r = 54.7; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(6.52, 6.52, 6.52); - Electronics: DAE3 Sn452; Towards Phantom High/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.579 mW/g Towards Phantom High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.6 V/m; Power Drift = -0.149 dB Peak SAR (extrapolated) = 0.724 W/kg SAR(1 g) = 0.574 mW/g; SAR(10 g) = 0.408 mW/g Maximum value of SAR (measured) = 0.607 mW/g Figure 31 Body, Towards Phantom, CDMA Cellular Channel777 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 49of 79 Figure 32 Z-Scan at power reference point (Body, Towards Phantom, CDMA Cellular Channel777) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 50of 79 CDMA Cellular Towards Phantom Middle Communication System: CDMA Cellular; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Body 835MHz Medium parameters used: f = 837 MHz; σ = 0.991 mho/m; ε r = 54.8; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(6.52, 6.52, 6.52); - Electronics: DAE3 Sn452; Towards Phantom Middle/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.869 mW/g Towards Phantom Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.2 V/m; Power Drift = -0.001 dB Peak SAR (extrapolated) = 0.976 W/kg SAR(1 g) = 0.775 mW/g; SAR(10 g) = 0.555 mW/g Maximum value of SAR (measured) = 0.822 mW/g Figure 33 Body, Towards Phantom, CDMA Cellular Channel384 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 51of 79 Figure 34 Z-Scan at power reference point (Body, Towards Phantom, CDMA Cellular Channel384) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 52of 79 CDMA Cellular Towards Phantom Low Communication System: CDMA Cellular; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: Body 835MHz Medium parameters used: f = 825 MHz; σ = 0.981 mho/m; ε r = 55; ρ = 1000 kg/m 3 - Probe: ET3DV6 - SN1737; ConvF(6.52, 6.52, 6.52); - Electronics: DAE3 Sn452; Towards Phantom Low/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.251 mW/g Towards Phantom Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.00 V/m; Power Drift = -0.159 dB Peak SAR (extrapolated) = 0.291 W/kg SAR(1 g) = 0.230 mW/g; SAR(10 g) = 0.165 mW/g Maximum value of SAR (measured) = 0.246 mW/g Figure 35 Body, Towards Phantom, CDMA Cellular Channel 1013 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 53of 79 Figure 36 Z-Scan at power reference point (Body, To…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 61of 79 ANNEX E： PROBE CALIBRATION CERTIFICATE TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 62of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 63of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 64of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 65of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 66of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 67of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 68of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 69of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 70of 79 ANNEX F： DIPOLE CALIBRATION CERTIFICATE TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 71of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 72of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 73of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 74of 79 TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 75of 79

TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 76of 79 ANNEX G： EUT APPEARENCES AND TEST CONFIGURATION Picture 3: Constituents of the sample (Lithium Battery is in the Handset) Picture 4 Left Hand Touch Cheek Position TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 77of 79 Picture 5 Left Hand Tilt 15 Degree Position Picture 6 Right Hand Touch Cheek Position TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 78of 79 Picture 7 Right Hand Tilt 15 Degree Position Picture 8 Body, towards the ground, the distance from handset to the bottom of the Phantom is 15mm) TA Technology (Shanghai) Co., Ltd. Test Report No. RZA2007-1042 Page 79of 79 Picture 9 Body, towards the Phantom, the distance from handset to the bottom of the Phantom is 15mm)

FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total3 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total3 Channel 283TM1 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total3 Channel 283TM3

FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page1, Total5 Appendix C Band Edges Compliance According to FCC Part 2.1051 & 22.917 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page2, Total5 TM1 Left Edge Channel 1013 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page3, Total5 Right Edge Channel 777 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page4, Total5 TM3 Left Edge Channel 1013 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of HUAWEI. No Distribution without Permission Page5, Total5 Right Edge Channel 777

FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total21 Appendix D Spurious Emission at Antenna Terminal According to FCC Part 2.1051 & 22.917 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total21 TM1 Channel 1013 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total21 Channel 777 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page8, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page9, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page10, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page11, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page12, Total21 TM3 Channel 1013 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page13, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page14, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page15, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page16, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page17, Total21 Channel 777 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page18, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page19, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page20, Total21 FCC ID: QISC2606 Report No: SYBH(R)115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page21, Total21

FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total4 Appendix E Radiated Spurious Emission According to FCC Part 2.1053 & 22.917 FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total4 Traffic Mode (9kHz-30MHz) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 9k 20k 40k 60 80k 100k 200k 600k 1M 2M 5M 10M 15M 20M 30M Level in dBm Frequency in Hz FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total4 Traffic Mode (30MHz-2GHz) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 15 30M 50 60 80 100M 200 300 400 500 800 1G 2G Level in dBm Frequency in Hz FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total4 Traffic Mode (2GHz-18GHz) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 15 2G 3G 4G 5G 6 7 8 9 10G 18G Level in dBm Frequency in Hz

FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total3 Appendix F Conducted Emission at Power Port According to FCC Part 15.107 FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total3 TPCA-053065E MEASUREMENT RESULT: QP Detector Frequency MHz Level dBμV Transd dB Limit dBμV Margin dB Line PE 0.325500 42.80 10.1 60 17.2 N FLO 0.465000 42.40 9.9 57 14.6 N FLO 0.982500 39.40 10.0 56 16.6 L3 FLO 2.211000 37.50 10.1 56 18.5 L3 FLO 9.604500 29.90 10.1 60 30.1 N FLO 25.350000 22.50 10.4 60 37.5 N FLO MEASUREMENT RESULT: AV Detector Frequency MHz Level dBμV Transd dB Limit dBμV Margin dB Line PE 0.321000 30.90 10.1 50 19.1 L3 FLO 0.496500 31.10 10.0 46 14.9 L3 FLO 0.996000 26.10 10.0 46 19.9 L3 FLO 2.269500 25.30 10.1 46 20.7 L3 FLO 5.586000 22.00 10.1 50 28.0 L3 FLO 0.321000 30.90 10.1 50 18.8 L3 FLO 0 10 20 30 40 50 60 70 80 Level [dBμV] 150k 300k 500k 1M2M3M5M7M10M 30M Frequency [Hz] + + + + + + x x x x x x FCC ID: QISC2606 Report No: SYBH (R) 115112007EB-1 Confidential Information of Huawei. No Di…

Text truncated - open the document above for the full version.