QISC2830CDMA 1X Digital Mobile Phone

CDMA 1X Mobile Phone USER GUIDE C2830 Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Table of Contents 1 Your Phone ..................................................................................... 1 2 Keys and Functions........................................................................ 2 3 Screen Icons.................................................................................... 4 4 Menu Tree ...................................................................................... 5 5 Installing the UIM Card and Battery .......................................... 6 6 Charging the Battery ..................................................................... 6 7 Using the Function Menu .............................................................. 7 8 Making a Call ................................................................................. 8 9 Answering a Call ............................................................................ 8 10 Phone Lock ................................................................................... 9 11 PIN and PUK ............................................................................... 9 12 Locking the Keypad..................................................................... 9 13 Changing the Text Input Modes .............................................. 10 14 Entering English (En)................................................................ 10 15 Entering Indonesian (In)........................................................... 11 16 Entering English (Abc).............................................................. 11 17 Entering Numbers ..................................................................... 11 18 Entering Symbols....................................................................... 11 19 Prepaid Registration..................................错误！未定义书签。 20 Customer Service .......................................错误！未定义书签。 21 Voice Mail...................................................错误！未定义书签。 22 Info Tagihan ...............................................错误！未定义书签。 23 Info TalkTime ............................................错误！未定义书签。 24 Warnings and Precautions........................................................ 13 1 1 Your Phone 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1. Starp hole 2. Earpiece 3. Screen 4. OK Key 5. Right Soft Key 6. End/Power Key 7. Number Key 8. Charger Interface 9. # Key 10. Microphone 11. * Key 12. Dial/Send Key 13. Left Soft Key 14. Navigation Keys Note The following figure is provided only for your reference. The appearance of the actual product may differ. 2 2 Keys and Functions Press... To... z View the dialed calls in the standby mode. z Make or answer a call. z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the standby mode. Left soft key Select the option displayed on the lower left corner of the screen. Right soft key Select the option displayed on the lower right corner of the screen. OK Key Confirm a selection. z Enter the corresponding shortcut menu. z Increase the volume ( or ) or decrease the volume ( or ) during a call. 3 Press... To... – z Enter numbers and characters. z Access the voice mailbox in the standby mode (by pressing and holding the 1 key). z Speed-dial phone numbers in the standby mode (by pressing and holding the 2-9 keys). z Select a submenu item labeled the corresponding number. z Enter the * symbol. z Enable or disable the Meeting profile in the standby mode (by pressing and holding it). z Provide different functions according to the phone features being used. z Enter the # symbol. z Lock the keypad in the standby mode (by pressing and holding it). z Provide different functions according to the phone features…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Declaration of Letter To whom it may concern: FCC ID: QISC2830, Model: HUAWEI C2830 This is to advise and officially, that we, HUAWEI TECHNOLOGIES CO., LTD., declare that C2830 only supports Us cellular 800MHz: 824MHz to 849MHz/869MHz to 894MHz (uplink/downlink) in North America.HUAWEI C2830 I/O connect can only support charging. It can’t support USB with PC for data transfer. Sincerely, Zhang Xinghai EMC Laboratory Manager For and Behalf of: Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China 0086-755-89651014

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC2830 to be kept confidential: 1. Schematic diagram 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI C2830 CDMA Handset SECRET Page1,Total 4 External Photos of HUAWEI C2830 HUAWEI C2830 CDMA Handset SECRET Page2,Total 4 HUAWEI C2830 CDMA Handset SECRET Page3,Total 4 HUAWEI C2830 CDMA Handset SECRET Page4,Total 4

HUAWEI C2830 CDMA Handset SECRET Page1, Total 1 Label _HUAWEI C2830

HUAWEI C2830 CDMA Handset SECRET Page1, Total 1 Label Location_HUAWEI C2830

HUAWEI C2830 CDMA Handset SECRET Page1,Total 4 Internal Photos of HUAWEI C2830 HUAWEI C2830 CDMA Handset SECRET Page2,Total 4 HUAWEI C2830 CDMA Handset SECRET Page3,Total 4 HUAWEI C2830 CDMA Handset SECRET Page4,Total 4

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785278 SAR-Laboratory Fax: +86-755-36834474 . Page 1 of 32 Accredited testing laboratory CNAS Registration number: L0310 Appendix to test report no. SYBH(Z-SAR)014072010 Calibration data, Phantom certificate and detail information of the DASY5 System Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 2 of 32 Table of Content 1 Calibration report “Probe ES3DV3”.......................................................................................................................3 2 Calibration report “835 MHz System validation dipole”.......................................................................................11 3 Calibration certificate of Data Acquisition Unit (DAE) .........................................................................................18 4 Application Note System Performance Check ....................................................................................................23 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 3 of 32 1 Calibration report “Probe ES3DV3” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 4 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 5 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 6 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 7 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 8 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 9 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 10 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 11 of 32 2 Calibration report “835 MHz System validation dipole” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 12 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 13 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 14 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 15 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 16 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 17 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 18 of 32 3 Calibration certificate of Data Acquisition Unit (DAE) Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 19 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 20 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 21 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 22 of 32 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 23 of 32 4 Application Note System Performance Check 4.1.1.1 Purpose of system performance check The system performance check verifies that the system operates within its specifications. System and operator errors can be detected and corrected. It is recommended that the system performance check is performed prior to any usage of the system in order to guarantee reproducible results. The measurement of the Specific Absorption Rate (SAR) is a complicated task and the result depends on the proper functioning of many components and the correct settings of many parameters. Faulty results due to drift, failures or incorrect parameters might not be recognized, since they often look similar in distribution to the correct ones. The Dosimetric Assessment System DASY5 incorporates a system performance check procedure to test the proper functioning of the system. The system performance check uses normal SAR measurements in a simplified setup (the flat section of the SAM Twin Phantom) with a well characterized source (a matched dipole at a specified distance). This setup was selected to give a high sensitivity to all parameters that might fail or vary over time (e.g., probe, liquid parameters, and software settings) and a low sensitivity to external effects inherent in the system (e.g., positioning uncertainty of the device holder). The system performance check does not replace the calibration of the components. The accuracy of the system performance check is not sufficient for calibration purposes. It is possible to calculate the field quite accurately in this simple setup; however, due to the open field situation some factors (e.g., laboratory reflections) cannot be accounted for. Calibrations in the flat phantom are possible with transfer calibration …

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785278 SAR-Laboratory Fax: +86-755-36834474 . Accredited testing laboratory CNAS Registration number: L0310 Report On SAR Test of 800MHz CDMA Mobile Phone M/N: HUAWEI C2830 Test report no. : SYBH(Z-SAR)014072010 Type identification : HUAWEI C2830 FCC-ID : QISC2830 Test specification : IEEE 1528-2003 : ANSI C95.1-1999 : OET Bulletin 65 Supplement C : IEC 62209-2:Ed1.0(2010-3) Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR)014072010 As of 2010-07-30 Page 2 of 51 Table of Contents 1 General Information............................................................................................................................................................ 3 1.1 Notes............................................................................................................................................................................ 3 1.1.1 Statement of Compliance................................................................................................................................. 3 1.2 Testing laboratory....................................................................................................................................................... 4 1.3 Details of applicant..................................................................................................................................................... 4 1.4 Application details...................................................................................................................................................... 4 1.5 Test item...................................................................................................................................................................... 5 1.5.1 EUT Description................................................................................................................................................. 6 1.6 Test specification(s)................................................................................................................................................... 6 1.6.1 RF exposure limits............................................................................................................................................. 7 2 Technical test....................................................................................................................................................................... 8 2.1 Summary of test results............................................................................................................................................. 8 2.2 Test environment........................................................................................................................................................ 8 2.3 Measurement and test set-up................................................................................................................................... 8 2.4 Measurement system................................................................................................................................................ 9 2.4.1 System Description............................................................................................................................................ 9 2.4.2 Test environment............................................................................................................................................. 10 2.4.3 Probe description............................................................................................................................................. 10 2.4.4 Phantom description........................................................................................................................................ 12 2.4.5 Device holder description...............................................................................................................................12 2.4.6 Scanning procedure........................................................................................................................................ 13 2.4.7 Spatial Peak SAR Evaluation......................................................................................................................... 14 2.4.8 Data Storage and Evaluation......................................................................................................................... 15 2.4.9 Test equipment utilized................................................................................................................................... 17 2.4.10 Tissue simulating liquids: dielectric properties............................................................................................ 18 2.4.11 Tissue simulating liquids: parameters........................................................................................................... 19 2.4.12 Measurement uncertainty evaluation for SAR test...................................................................................... 20 2.4.13 Measurement uncertainty evaluation for system validation....................................................................... 21 2.4.14 System validation............................................................................................................................................. 22 2.4.15 Validation procedure........................................................................................................................................ 23 2.5 Test Results.............................................................................................................................................................. 24 2.5.1 Conducted power measurements.................................................................................................................. 24 2.6 Test results (Head and Body SAR).........................…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: CDMA Mobile Phone Model Number: HUAWEI C2830 Report No: SYBHZ(R)E005082010EB-1 FCC ID: QISC2830 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of C2830 FCC ID: QISC2830 Security Level: Public Report No: SYBHZ(R)E005082010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total38 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of C2830 FCC ID: QISC2830 Security Level: Public Report No: SYBHZ(R)E005082010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total38 REPORT ON FCC Test of Huawei CDMA Mobile Phone M/N: HUAWEI C2830 Report No: SYBHZ(R)E005082010EB-1 FCC ID: QISC2830 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION Pass General Manager 2010.08.16 张兴海 Date Name signature Test Lab Engineer 2010.08.16 温剑锋 Date Name signature FCC Test Report of C2830 FCC ID: QISC2830 Security Level: Public Report No: SYBHZ(R)E005082010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total38 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 7 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 7 4.2 EUT IDENTIFICATION LIST......................................................................................................................... 7 5 Main Test Instruments...............................................................................................................................7 6 Transmitter Measurements....................................................................................................................... 7 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)........................................................................... 7 6.2 CONDUCTED OUTPUT POWER................................................................................................................. 7 6.3 MODULATION CHARACTERISTICS............................................................................................................ 7 6.4 OCCUPIED BANDWIDTH.......................................................................................................................... 7 6.5 BAND EDGES COMPLIANCE.................................................................................................................... 7 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL.......................................................................................... 7 6.7 RADIATED SPURIOUS RADIATION............................................................................................................ 7 6.8 FREQUENCY STABILITY.......................................................................................................................... 7 7 EMC Test.................................................................................................................................................... 7 7.1 CONDUCTED EMISSION AT POWER PORT................................................................................................ 7 7.2 RADIA…

Text truncated - open the document above for the full version.

Zur optimalen Anzeige dieses PDF-Portfolios sollte es in Acrobat oder Adobe Reader ab Version 9 geöffnet werden. Adobe Reader jetzt herunterladen