QISC5320CDMA Handset

Safety Precautions Before using the phone, please read the safety precautions carefully and let your children know these, so that you can use your phone correctly and safely. For details, see "Warnings and Precautions". Do not switch on your phone when phone use is prohibited or when phone use may cause interference or danger. Do not use your phone while driving. Follow the rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus. Switch off your phone in an aircraft. The phone may cause interference to control signals of the aircraft. Switch off your phone near high-precision electronic devices. The phone may affect the performance of these devices. Do not attempt to disassemble your phone or its accessories. Only qualified personnel are allowed to service or repair the phone. Do not put your phone or its accessories in containers with strong electromagnetic field. Do not put magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance. Use approved batteries and chargers only to avoid explosion. Observe the laws or regulations on phone use. Respect others’ privacy and legal rights when using your phone. Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. General Conventions Description The phone mentioned in this manual refers to HUAWEI C5320 CDMA 1X mobile phone. Operation Action Description Press and hold Press a key for two to three seconds and then release it. Press Press a key and release it quickly. Interface Language Format Description Boldface The name of an item appears on the phone display is in boldface. For example, Menu. > Multi-level menus are spearated by a rightward arrow. For example, Menu > Messages indicates the Messages submenu under Menu. Symbols Eye-catching symbols are used in this manual to highlight the points worthy of special attention during the operation. They are defined as follows. Symbol Name Description Caution Means reader be extremely careful during the operation. Note Means a complementary description. Table of Contents 1 About Your Phone...................................................... 1 Your Phone............................................................................ 1 Keys and Functions............................................................... 2 Screen Icons.......................................................................... 3 Interfaces............................................................................... 4 2 Getting Started........................................................... 6 Installing the Battery............................................................. 6 Installing the UIM Card......................................................... 6 Charging the Battery.............................................................. 6 Powering On/Off the Phone................................................... 7 Using the Function Menu...................................................... 7 3 Voice Services............................................................. 8 Making a Call........................................................................ 8 Answering a Call................................................................... 8 Operations During a Call....................................................... 9 4 Text Entry................................................................. 10 Text Input Modes................................................................. 10 Entering English.................................................................. 10 Entering Numbers................................................................ 12 Entering Symbols................................................................ 12 5 Messages................................................................... 13 Writing and Sending a Message.......................................... 13 Viewing a Message.............................................................. 13 6 Phonebook................................................................ 15 i Adding a Contact................................................................. 15 Searching for a Contact....................................................... 15 7 Alarm Clock............................................................. 17 Enabling an Alarm Clock.................................................... 17 Disabling an Alarm Clock................................................... 17 8 Security..................................................................... 19 Enabling/Disabling the Phone Lock.................................... 19 Changing the Phone Lock Code.......................................... 19 Setting the PIN Lock........................................................... 19 Changing the locked PIN Code........................................... 20 Locking the Keypad............................................................ 20 9 Music Player............................................................ 22 Selecting a Song..................................…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC5320 to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: TUV Rheinland (Shenzhen) Co., Ltd Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2007-01-10 To whom it may concern: We the undersigned, hereby authorize TUV Rheinland (Shenzhen) Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TUV Rheinland (Shenzhen) Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI C5320 CDMA Handset SECRET Page1,Total 6 External Photo of HUAWEI C5320 HUAWEI C5320 CDMA Handset SECRET Page2,Total 6 HUAWEI C5320 CDMA Handset SECRET Page3,Total 6 HUAWEI C5320 CDMA Handset SECRET Page4,Total 6 HUAWEI C5320 CDMA Handset SECRET Page5,Total 6 HUAWEI C5320 CDMA Handset SECRET Page6,Total 6

HUAWEI C5320 CDMA Handset SECRET Page1, Total 1 Label Location_C5320

HUAWE C5320 CDMA Handset SECRET Page1, Total 1 Label of C5320

Huawei C5320 CDMA Handset SECRET Page1,Total 9 Internal Photo of Huawei C5320 Huawei C5320 CDMA Handset SECRET Page2,Total 9 Huawei C5320 CDMA Handset SECRET Page3,Total 9 Huawei C5320 CDMA Handset SECRET Page4,Total 9 Huawei C5320 CDMA Handset SECRET Page5,Total 9 Huawei C5320 CDMA Handset SECRET Page6,Total 9 Huawei C5320 CDMA Handset SECRET Page7,Total 9 Huawei C5320 CDMA Handset SECRET Page8,Total 9 Huawei C5320 CDMA Handset SECRET Page9,Total 9

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 2 of 73 Notes 1. . The test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 2. Copies of the test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 3. The test report shall be invalid if there are no signatures of the testing person, reviewing person and approving person on it. 4. The test report shall be invalid if it is altered. 5. Any demurral about the test shall be put forward to the testing organization within 15 days after the receiving of the test report. 6. This test report standalone dose not constitute or imply by its own an approval of the product by any Certification Authorities or Competent Bodies. 7. This report is only valid if complete, and test report shall not be reproduced except in full, without written approval of the laboratory. 8. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of Telecommunication Metrology Center of MII and the Accreditation Bodies, if it applies. Address:No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China (Telecommunication Metrology Center of MII) Post code: 100083 Telephone: +86 10 62302041Fax:+86 10 62304793 Web site: http://www.emcite.com E-mail: [email protected] Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 3 of 73 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES ............................................................................... 5 2 GENERAL CONDITIONS................................................................................................... 5 3 DESCRIPTION OF EUT...................................................................................................... 5 3.1 A DDRESSING INFORMATION RELATED TO EUT...................................................................... 5 3.2 C ONSTITUENTS OF EUT ........................................................................................................ 6 3.3 G ENERAL DESCRIPTION......................................................................................................... 6 4 OPERATIONAL CONDITIONS DURING TEST ............................................................. 7 4.1 S CHEMATIC TEST CONFIGURATION........................................................................................ 7 4.2 SAR M EASUREMENT SET-UP................................................................................................. 8 4.3 D ASY4 E-FIELDPROBE SYSTEM............................................................................................ 8 4.4 E- FIELD PROBE CALIBRATION............................................................................................... 9 4.5 O THER TEST EQUIPMENT.................................................................................................... 10 4.5.2 P HANTOM......................................................................................................................... 10 4.6 E QUIVALENT TISSUES.......................................................................................................... 10 4.7 S YSTEM SPECIFICATIONS..................................................................................................... 11 5 CHARACTERISTICS OF THE TEST ............................................................................. 11 5.1 A PPLICABLELIMIT REGULATIONS....................................................................................... 11 5.2 A PPLICABLEMEASUREMENT STANDARDS........................................................................... 12 6 LABORATORY ENVIRONMENT ................................................................................... 12 7 CONDUCTED OUTPUT POWER MEASUREMENT................................................... 12 7.1 S UMMARY........................................................................................................................... 12 7.2 C ONDUCTED POWER........................................................................................................... 12 8 TEST RESULTS .................................................................................................................. 13 8.1 D IELECTRIC PERFORMANCE................................................................................................ 13 8.2 S YSTEM VALIDATION........................................................................................................... 13 8.3 S UMMARY OF MEASUREMENT RESULTS (SLIDE DOWN) ....................................................... 14 8.4 C ONCLUSION....................................................................................................................... 15 9 MEASUREMENT UNCERTAINTY ................................................................................. 15 10 MAIN TEST INSTRUMENTS......................................................................................... 16 11 TEST PERIOD................................................................................................................... 16 12 TEST LOCATION............................................................................................................. 16 ANNEX A MEASUREMENT PROCESS ............................................................................ 17 ANNEX B TEST LAYOUT ................................................................................................... 18 ANNEX C GRAPH RESULTS.............................................................................................. 22 ANNEX D SYSTEM VALIDATION RESULTS.................................................................. 58 ANNEX E PROBE CALIBRATION CERTIFICATE........................................................ 59 ANNEX F DIPOLE CALIBRATION CERTIFICATE..................…

Text truncated - open the document above for the full version.

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 33 of 73 Fig. 12 Z-Scan at power reference point (CDMA 835MHz CH1013) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 34 of 73 CDMA 1X Right Cheek High Date/Time: 2006-12-15 16:37:19 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.03 mW/g Cheek High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.2 V/m; Power Drift = -0.118 dB Peak SAR (extrapolated) = 1.21 W/kg SAR(1 g) = 0.911 mW/g; SAR(10 g) = 0.634 mW/g Maximum value of SAR (measured) = 0.935 mW/g   0 dB = 0.935mW/g Fig. 13 Right Hand Touch Cheek CDMA 835MHz CH777 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 35 of 73 Fig. 14 Z-Scan at power reference point (CDMA 835MHz CH777) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 36 of 73 CDMA 1X Right Cheek Middle Date/Time: 2006-12-15 16:14:14 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.733 mW/g Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.1 V/m; Power Drift = -0.126 dB Peak SAR (extrapolated) = 0.864 W/kg SAR(1 g) = 0.634 mW/g; SAR(10 g) = 0.434 mW/g Maximum value of SAR (measured) = 0.664 mW/g   0 dB = 0.664mW/g Fig.15 Right Hand Touch Cheek CDMA 835MHz CH384 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 37 of 73 Fig. 16 Z-Scan at power reference point (CDMA 835MHz CH384) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 38 of 73 CDMA 1X Right Cheek Low Date/Time: 2006-12-15 16:59:14 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Cheek Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.658 mW/g Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.3 V/m; Power Drift = -0.084 dB Peak SAR (extrapolated) = 0.815 W/kg SAR(1 g) = 0.599 mW/g; SAR(10 g) = 0.419 mW/g Maximum value of SAR (measured) = 0.648 mW/g   0 dB = 0.648mW/g Fig. 17 Right Hand Touch Cheek CDMA 835MHz CH1013 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 39 of 73 Fig. 18 Z-Scan at power reference point (CDMA 835MHz CH1013) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 40 of 73 CDMA 1X Right Tilt High Date/Time: 2006-12-15 16:47:30 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 848.31 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt High/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.628 mW/g Tilt High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.8 V/m; Power Drift = -0.174 dB Peak SAR (extrapolated) = 0.754 W/kg SAR(1 g) = 0.569 mW/g; SAR(10 g) = 0.392 mW/g Maximum value of SAR (measured) = 0.583 mW/g   0 dB = 0.583mW/g Fig. 19 Right Hand Tilt 15°CDMA 835MHz CH777 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 41 of 73 Fig. 20 Z-Scan at power reference point (CDMA 835MHz CH777) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 42 of 73 CDMA 1X Right Tilt Middle Date/Time: 2006-12-15 16:24:28 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 836.52 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Middle/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.415 mW/g Tilt Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.4 V/m; Power Drift = -0.100 dB Peak SAR (extrapolated) = 0.504 W/kg SAR(1 g) = 0.382 mW/g; SAR(10 g) = 0.263 mW/g Maximum value of SAR (measured) = 0.386 mW/g   0 dB = 0.386mW/g Fig. 21 Right Hand Tilt 15°CDMA 835MHz CH384 Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 43 of 73 Fig. 22 Z-Scan at power reference point (CDMA 835MHz CH384) Telecommunication Metrology Center of Ministry of Information Industry No. 2006E02034Page 44 of 73 CDMA 1X Right Tilt Low Date/Time: 2006-12-15 17:09:19 Electronics: DAE3 Sn536 Medium: 835 Head Medium parameters used (interpolated): ı = 0.88 mho/m; İ r = 41.7; ȡ = 1000 kg/m 3 Ambient Temperature:22.5 o C Liqiud Temperature: 21.4 o C Communication System: CDMA 1X-new Frequency: 824.7 MHz Duty Cycle: 1:1 Probe: ET3DV6 - SN1736 ConvF(6.51, 6.51, 6.51) Tilt Low/Area Scan (51x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpo…

Text truncated - open the document above for the full version.

FCC TEST REPORT OF Huawei CDMA Mobile Station M/N: C5320 Jan. 29, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH(R) 55122006 FCC ID: QISC5320 Report No: SYBH(R) 55122006 Confidential Information of Huawei. No Distribution without Permission Page2, Total38 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH(R) 55122006 Confidential Information of Huawei. No Distribution without Permission Page3, Total38 REPORT ON FCC Test of Huawei CDMA Mobile Station M/N: C5320 Report No: SYBH(R)55122006 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 9 items need to be tested, 9 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2006.02.10 Tang Shuanli Date Name signature Technical Responsibility For Area of Testing 2006.02.10 Zhang Xinghai Date Name signature Test Lab Engineer 2006.02.10 Deng Jiang Date Name signature Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 Report No: SYBH(R) 55122006 Confidential Information of Huawei. No Distribution without Permission Page4, Total38 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................ 6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................ 11 6 Transmitter Measurements.................................................................................................................... 13 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP) ........................................................................ 13 6.2 MODULATION CHARACTERISTICS.......................................................................................................... 16 6.3 OCCUPIED BANDWIDTH........................................................................................................................ 18 6.4 BAND EDGES COMPLIANCE.................................................................................................................. 20 6.5 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 22 6.6 RADIATED SPURIOUS RADIATION.......................................................................................................... 24 6.7 FREQUENCY STABILITY........................................................................................................................ 28 7 EMC Test................................................................................................................................................. 32 7.1 CONDUCTED EMISSION AT POWER PORT.............................................................................................. 32 7.2 RADIATED EMISSION OF ENCLOSURE IN IDEAL MODE............................................................................. 35 8 System Measurement Uncertainty....................................…

Text truncated - open the document above for the full version.