QISC5800CDMA 1X Digital Mobile Phone

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Conventions Term Conventions This manual refers to HUAWEI C5800 cdma2000 mobile phone as "the phone" or "your phone". Operation Conventions Operation Meaning Press and hold Press a key for two to three seconds and then release it. Press Press a key and release it quickly. GUI Conventions Format Meaning Bold Any string displayed on the phone screen is in boldface, such as " Menu ". > Multi-level menus are spearated by ">". For example, " Menu > Messages " indicates " Messages " is the submenu of " Menu ". Symbols Symbol Description Meaning Caution Warnings and precautions for operations Note Complementary descriptions for operations ii Contents 1 Getting to Know Your Phone ............................................ 5 Keys and Functions..............................................................................6 Interfaces ...........................................................错误！未定义书签。 Screen Display .....................................................................................8 Screen Icons .........................................................................................8 2 Getting Started ................................................................. 11 Installing the UIM Card, SD Card and Battery ................................. 11 Charging the Battery .......................................................................... 11 Using a Function Menu......................................................................12 3 Voice Services ................................................................... 14 Making a Call.....................................................................................14 Answering a Call................................................................................15 Operations During a Call ...................................................................16 4 Text Entry......................................................................... 17 Text Input Screen ...............................................................................17 Text Input Modes ...............................................................................17 Entering English.................................................................................18 Entering Numbers ..............................................................................20 Entering Symbols...............................................................................20 iii 5 SMS ................................................................................... 21 Writing and Sending a Text Message ...............错误！未定义书签。 Reading a Text Message ....................................................................21 6 Contacts ............................................................................ 24 Adding a Contact ...............................................................................24 Searching for a Contact......................................................................24 7 Music ................................................................................. 26 Adding the Playlist.............................................................................26 Playing Music ....................................................................................27 Setting the Playing Mode and Effect .................................................28 Listening to Music Through a Bluetooth Stereo Headset..................29 8 Video Player...................................................................... 30 Selecting a Video File ........................................................................30 Playing a Video File...........................................................................30 9 Camer…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISC5800 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI C5800 CDMA Handset SECRET Page1,Total 4 External Photos of HUAWEI C5800 HUAWEI C5800 CDMA Handset SECRET Page2,Total 4 HUAWEI C5800 CDMA Handset SECRET Page3,Total 4 HUAWEI C5800 CDMA Handset SECRET Page4,Total 4

HUAWEI C5800 CDMA Handset SECRET Page1, Total 1 Label Location_C5800

HUAWEI C5800 CDMA Handset SECRET Page1, Total 1 Label _C5800

HUAWEI C5800 CDMA Handset SECRET Page1,Total 6 Internal Photos of HUAWEI C5800 HUAWEI C5800 CDMA Handset SECRET Page2,Total 6 HUAWEI C5800 CDMA Handset SECRET Page3,Total 6 HUAWEI C5800 CDMA Handset SECRET Page4,Total 6 HUAWEI C5800 CDMA Handset SECRET Page5,Total 6 HUAWEI C5800 CDMA Handset SECRET Page6,Total 6

Report No.: RZA2009-1108 TESTING No. L2264 OET 65 TEST REPORT Product Name CDMA 1X Digital Mobile Telephone Model HUAWEI C5800 FCC ID QISC5800 Client Huawei Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name CDMA 1X Digital Mobile Telephone Model HUAWEI C5800 FCC ID QISC5800 Report No. RZA2009-1108 Client Huawei Technologies Co., Ltd. Manufacturer Huawei Technologies Co., Ltd. Standard(s) ANSI/IEEE C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE 1528–2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head Due to Wireless Communications Devices: Experimental Techniques. OET Bulletin 65 supplement C, published June 2001 including DA 02-1438, published June 2002: Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits. Transition Period for the Phantom Requirements of Supplement C to OET Bulletin 65. IEC 62209-1: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 1: Procedure to determine the Specific Absorption Rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz). IEC 62209-2:2008(106/162/CDV): Human exposure to radio frequency fields from handheld and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 2: Procedure to determine the Specific Absorption Rate (SAR)for wireless communication devices used in close proximity to the human body .( frequency rang of 30MHz to 6GHz ) Conclusion Localized Specific Absorption Rate (SAR) of this portable wireless equipment has been measured in all cases requested by the relevant standards cited in Clause 5.2 of this test report. Maximum localized SAR is below exposure limits specified in the relevant standards cited in Clause 5.1 of this test report. General Judgment: Pass (Stamp) Date of issue: september 3 rd , 2009 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Li Jinchang TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 3of 109 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the test report.........................................................................................................5 1.2. Testing laboratory .................................................................................................................5 1.3. Applicant Information ............................................................................................................6 1.4. Manufacturer Information ......................................................................................................6 1.5. Information of EUT................................................................................................................7 1.6. Test Date ..............................................................................................................................8 2. Operational Conditions during Test ..............................................................................................9 2.1. General description of test procedures .................................................................................9 2.2. Information for the measurement of CDMA 1x devices.........................................................9 2.2.1. Output Power Verification ..............................................................................................9 2.2.2. Head SAR measurement ...............................................................................................9 2.2.3. Body SAR measurement .............................................................................................10 3. SAR Measurements System Configuration ................................................................................ 11 3.1. SAR Measurement Set-up .................................................................................................. 11 3.2. DASY 4 E-field Probe System.............................................................................................12 3.2.1. ET3DV6 Probe Specification .......................................................................................12 3.2.2. E-field Probe Calibration ..............................................................................................13 3.3. Other Test Equipment .........................................................................................................13 3.3.1. Device Holder for Transmitters ....................................................................................13 3.3.2. Phantom......................................................................................................................14 3.4. Scanning procedure............................................................................................................14 3.5. Data Storage and Evaluation ..............................................................................................16 3.5.1. Data Storage................................................................................................................16 3.5.2. Data Evaluation by SEMCAD ......................................................................................16 3.6. System check......................................................................................................................19 3.7. Equivalent Tissues ..............................................................................................................20 4. Laboratory Environment.........................................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 91of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 92of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 93of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 94of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 95of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 96of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 97of 109 ANNEX F: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 98of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 99of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 100of 109 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2009-1108 Page 101of 109

Zur optimalen Anzeige dieses PDF-Portfolios sollte es in Acrobat oder Adobe Reader ab Version 9 geöffnet werden. Adobe Reader jetzt herunterladen

EMC Test Report Product Name: CDMA Mobile Phone With Bluetooth Model Number:C5800 Report No: SYBHZ (R) E060092009EB-1 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R) E060092009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total21 Notice 1 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R) E060092009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total21 Notice 2 Modification Information: Table 1 Modification Information 1 2 3 4 5 6 Modification Information 7 FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R) E060092009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total21 REPORT ON EMC Test of CDMA Mobile Phone With Bluetooth M/N:C5800 REGULATION FCC CFR47 Part 15: Subpart B; FCC CFR47 Part 22 Subpart H;： START OF TEST Feb. 21, 2010 END OF TEST Feb. 24, 2010 Final Judgement: Pass Approver 2010-03-12 张兴海 Date Name Signature Operator 2010-03-10 胡 俊 Date Name Signature FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R) E060092009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total21 REPORT BODY CONTENT 1 Status...................................................................................................................................... 6 1.1 Product Information................................................................................................................. 6 1.2 Applied Standard..................................................................................................................... 6 1.3 Test Site .................................................................................................................................. 7 1.4 Test environment condition .....................................................................................................7 2 Summary of Results................................................................................................................ 8 3 Equipment Specification .........................................................................................................9 3.1 General Description ................................................................................................................ 9 3.2 Sub-Assembly Identity ............................................................................................................ 9 4 System Configuration during EMC Test ................................................................................ 10 4.1 Cables Used during Test ...................................................................................................... 10 4.2 Associated Equipment Used during Test .............................................................................. 10 4.3 Test Configurations and Test Mode ...................................................................................... 10 4.4 Test conditions and test connections .................................................................................... 10 5 Electromagnetic Interference (EMI) ...................................................................................... 12 5.1 Radiated Disturbance 30MHz to 1000MHz........................................................................... 12 5.2 Conducted Disturbance 0.15 MHz to 30MHz........................................................................ 13 5.3 Radiated Spurious Emissions ............................................................................................... 14 6 Main Test Instruments ..........................................................................................................16 7 System Measurement Uncertainty ........................................................................................ 17 8 Graph and Data of Emission Test ......................................................................................... 18 8.1 Radiated Disturbance ...........................................................................................................18 8.2 Conducted Disturbance.........................…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: CDMA Mobile Phone Model Number: HUAWEI C5800 Report No: SYBHZ(R)E060092009EB-2 FCC ID: QISC5800 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of C5800 FCC ID: QISC5800 Security Level: Public Report No: SYBHZ(R)E060092009EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total30 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of C5800 FCC ID: QISC5800 Security Level: Public Report No: SYBHZ(R)E060092009EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total30 REPORT ON FCC Test of Huawei CDMA Mobile Phone M/N: HUAWEI C5800 Report No: SYBHZ(R)E060092009EB-2 FCC ID: QISC5800 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; CONCLUSION Pass General Manager 2010.03.12 张兴海 Date Name signature Test Lab Engineer 2010.03.10 胡 俊 Date Name signature FCC Test Report of C5800 FCC ID: QISC5800 Security Level: Public Report No: SYBHZ(R)E060092009EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total30 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST......................................................................................................................... 8 5 Main Test Instruments...............................................................................................................................8 6 Transmitter Measurements....................................................................................................................... 8 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)........................................................................... 8 6.2 CONDUCTED OUTPUT POWER................................................................................................................. 8 6.3 MODULATION CHARACTERISTICS............................................................................................................ 8 6.4 OCCUPIED BANDWIDTH.......................................................................................................................... 8 6.5 BAND EDGES COMPLIANCE.................................................................................................................... 8 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL.......................................................................................... 8 6.7 FREQUENCY STABILITY.......................................................................................................................... 8 7 System Measurement Uncertainty........................................................................................................... 8 8 Appendixes................................................................................................................................................ 8 FCC Test Report of C5800 FCC ID: QISC5800 Security Level: Public Report No: SYBHZ(R)E060092009EB-2 Confidential Information of Huawei. No Distribution without Written Permissio…

Text truncated - open the document above for the full version.

FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R)E060092009EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total6 Photos of EUT FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R)E060092009EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total6 C5800 Appearance FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R)E060092009EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total6 Photos of Test Setup FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R)E060092009EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total6 1 Radiated Emissions Radiated Disturbance 2 Radiated Spurious Emissions FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R)E060092009EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total6 Radiated Spurious Emission (below 2GHz) Radiated Spurious Emission (2GHz to18GHz) 3 Conducted Emissions FCC Test Report of C5800 FCC ID: QISC5800 Security Level: secret Report No: SYBHZ(R)E060092009EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total6 Conducted Emissions for AC Ports