QISCHE2-L12Smart Phone

Quick Start Guide Your phone at a glance Thank you for choosing the Huawei smartphone. Before you start, let's take a look at your new phone. Press and hold the power button to power on your phone. To power off your phone, press and hold the power button, and touch Power off > OK. To forcibly restart your phone, press and hold the power button until your phone vibrates. Headset jack Power button Volume button Micro USB port Front camera Earpiece Return Home Menu Status indicator Microphone Microphone Light sensor Speaker Getting started Caution Your phone's built-in battery is not user-removable. To replace the battery, contact an authorized Huawei service center. Do not attempt to remove it yourself. Follow the instructions in the following figures to install your micro-SIM card, microSD card. Before you insert or remove the micro-SIM card, power off your phone. 1 5VKTZNKHGZZKX_IU\KX 2 /TYKXZZNK3OIXU9/3IGXJ 4 5 5 /TYZGRRZNKHGZZKX_IU\KX )NGXMKZNKVNUTK /TYKXZZNKSOIXU9*IGXJ5VZOUTGR 3 Locking and unlocking the screen Press the power button to lock the screen. After your phone is idle for a specified period of time, its screen automatically locks. If the screen is off, press the power button to turn it on. Slide your finger in any direction to unlock the screen. Flick up from the bottom of the screen to quickly launch commonly used applications without unlocking the screen. Calling and messaging Touch to place a call using the dialer. You can also touch a phone number in a message, email, web page, or other screen to place a call. Touch to send a text or multimedia message. You can save photos, audio clips, or videos from received multimedia messages. Camera Touch . Flick left or right to switch between photo and video capture modes. Frame the scene you want to capture. Let your camera focus automatically or touch the screen to focus on a specific object. Then touch to take a photo. In all focus mode, you can change the focus point on a photo after it's been taken. Internet connection You can access the Internet through Wi-Fi or a mobile network. Flick down from the status bar to open the notification panel. Touch to turn on the mobile network. Touch and hold to go to the Wi-Fi settings screen. Turn on Wi-Fi and follow the onscreen instructions to connect your phone to a Wi-Fi network. Backing up data You can use the Backup app to back up your phone's data and restore it later. Touch Tools > . Select the data you want to back up, such as your contacts, messages, and photos. Then follow the onscreen instructions. For more information Want to obtain the full user guide? Download the honor 4X User Guide from  http://consumer.huawei.com/en. Want to learn more about Huawei EMUI? Go to http://emui.huawei.com for the latest information. All pictures and illustrations in this guide, including but not limited to the phone color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. Personal Information and Data Security The use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming accessible to others. Several measures are recommended to help you protect personal and confidential information. • Place your device in a safe area to prevent it from unauthorized use. • Set your device screen to lock and create a password or unlock pattern to open it. • Periodically back up personal information kept on your SIM card, memory card, or stored in your device memory. If you change to a different device, be sure to move or delete any personal information on your old device. • If you are worried about viruses when you receive messages or emails from a stranger, you can delete them without opening them. • If you use your device to browse the Internet, avoid websites that might pose a security risk to avoid theft of your personal information. • If you use services such as Wi-Fi tether or Bluetooth, set passwords for these services to prevent unauthorized access. When these services are not in use, turn them off. • Install or upgrade device security software and regularly scan for viruses. • Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications should be scanned for viruses. • Install security software or patches released by Huawei or third-party application providers. • Some applications require and transmit location information. As a result, a third-party may be able to share your location information. • Your device may provide detection and diagnostic information to third-party application providers. Third party vendors use this information to improve their products and services. • If you have concerns about the security of your personal information and data, please contact [email protected]. Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment • Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited. • Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information. • Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Protecting your hearing when using a headset • To prevent possible hearing damage, do not listen a…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2015-01-31 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISCHE2-L12 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2015-3- 31: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

Huawei Technologies Co., Ltd. <2015-02-07> Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Industry Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Declaration on Electrically Identical Models TO WHOM IT MAY CONCERN We, < Huawei Technologies Co., Ltd.>, declare on our sole responsibility that the new model Che2-L12 with FCC ID: QISCHE2-L12 is identical in hardware and software to the certified model HUAWEI G735-L03 under FCC ID: QISG735-L03 The only differences between the new model and the original model are: Model HUAWEI G735-L03 Che2-L12 Brand HUAWEI HUAWEI trademark HONOR honor trademark FCC ID QISG735-L03 QISCHE2-L12 Frequency 2G: GSM850/1900 3G: W850/1700/1900 4G: B2/4/7 2G: GSM850/1900 3G: W850 4G: B5/7 Frequency disabled by software. PCB (1)Delete B2 Div RX; (2)ADD B5/8 DIV RX;(3)Change Duplexer from B4 To B3; SIM Card Single Single Hardware Version HL4CHRPLS2M HL4CHRPLS2M Software Version G735-L03 V100R001C900B253 Che2-L12 V100R001C900B254SP601 Dimensions The same The same Appearance The same The same main antenna The same The same DIV antenna 1(Only RX) The same The same BT/Wi-Fi antenna The same The same Others The same The same We attest that above changing are relevant for any RF/SAR/EMC behaviour subject to regulatory items. So we have been added test about these changes. Therefore the following test reports remain applicable: - Test Report No. < SYBH(Z-RF)045092014> - Test Report No. < SYBH(Z-RF)045092014> - Test Report No. < SYBH(Z-SAR)040092014-2> If you have any questions, please feel free to contact us at the address shown below Sincerely, Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: 0086-0755- 28970299 Fax: 0086-0755-89650226

Che2-L12 Smart Phone SECRET 2/4/2015 Page1,Total 2 External Photos of Che2-L12 Che2-L12 Smart Phone SECRET 2/4/2015 Page2,Total 2

Huawei Technologies Co., Ltd. Date: February 4, 2015 Statement We , Huawei Technologies Co., Ltd, states that our device, FCC ID: QISCHE2-L12, has a battery, But the battery will be placed in the battery compartment when delivery, it is not visible to the users as they purchase the products For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Te l : 0086-0755-28970299 Fax: 0086-0755-89650226

Che2-L12 Smart Phone SECRET 2015-2-4 Page1, Total1 Label & Label Location：

Che2-L12 Smart Phone SECRET 2015-02-04 Page1, Total3 Internal Photos of Che2-L12 Che2-L12 Smart Phone SECRET 2015-02-04 Page2, Total3 Che2-L12 Smart Phone SECRET 2015-02-04 Page3, Total3

Report NO.: SYBH(Z-SAR)021122014-2 FCC ID: QISCHE2-L12 Appendix A System performance verification Table of contents SystemPerformanceCheck-D835-EX-Head SystemPerformanceCheck-D835-EX-Body SystemPerformanceCheck-D1900-EX-Head SystemPerformanceCheck-D1900-EX-Body SystemPerformanceCheck-D2450-EX-Head SystemPerformanceCheck-D2450-EX-Body SystemPerformanceCheck-D2600-EX-Head SystemPerformanceCheck-D2600-EX-Body Date: 2015-1-6 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Head DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.871 S/m; ε r = 41.316; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.09, 9.09, 9.09); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=15mm, Pin=250mW/Area Scan (6x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.60 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 50.84 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 3.46 W/kg SAR(1 g) = 2.26 W/kg; SAR(10 g) = 1.46 W/kg Maximum value of SAR (measured) = 2.66 W/kg 0 dB = 2.60 W/kg = 4.15 dBW/kg Date: 2015-1- 2 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Body DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.955 S/m; ε r = 55.236; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.06, 9.06, 9.06); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=15mm, Pin=250mW/Area Scan (6x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.75 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 50.43 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 3.55 W/kg SAR(1 g) = 2.41 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 2.81 W/kg 0 dB = 2.75 W/kg = 4.39 dBW/kg Date: 2015-1-2 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Head DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.407 S/m; ε r = 38.255; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(7.6, 7.6, 7.6); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 12.5 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 85.21 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 19.5 W/kg SAR(1 g) = 10.4 W/kg; SAR(10 g) = 5.33 W/kg Maximum value of SAR (measured) = 13.2 W/kg 0 dB = 12.5 W/kg = 10.97 dBW/kg Date: 2015-1-3 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Body DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.565 S/m; ε r = 51.32; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(7.17, 7.17, 7.17); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.5 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 78.29 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 20.1 W/kg SAR(1 g) = 11 W/kg; SAR(10 g) = 5.65 W/kg Maximum value of SAR (measured) = 13.8 W/kg 0 dB = 13.5 W/kg = 11.30 dBW/kg Date: 2015-1-4 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D2450-EX-Head DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.818 S/m; ε r = 39.844; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(7.08, 7.08, 7.08); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm, Pin=250mW/Area Scan (6x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 17.1 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 86.42 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 29.1 W/kg SAR(1 g) = 13.7 W/kg; SAR(10 g) = 6.23 W/kg Maximum value of SAR (measured) = 18.0 W/kg 0 dB = 17.1 W/kg = 12.33 dBW/kg Date: 2015-1-8 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D2450-EX-Body DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1…

Text truncated - open the document above for the full version.

Report NO.: SYBH(Z-SAR)021122014-2 FCC ID:QISCHE2-L12 Appendix B DASY5 measurement results Table of contents GSM835 Head GSM835 Body GSM1900 Head GSM1900 Body UMTS Band V Head UMTS Band V Body LTE Band V Head LTE Band V Body LTE Band VII Head LTE Band VII Body WiFi 2.4G Head WiFi 2.4G Body Date: 2015-1-6 Test Laboratory: HUAWEI SAR/HAC Lab Che2-L12 GSM850 251CH Right hand touch cheek DUT: Che2-L12; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 848.8 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 849 MHz; σ = 0.883 S/m; ε r = 41.129; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.09, 9.09, 9.09); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Head/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.287 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.767 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.337 W/kg SAR(1 g) = 0.267 W/kg; SAR(10 g) = 0.202 W/kg Maximum value of SAR (measured) = 0.289 W/kg 0 dB = 0.287 W/kg = -5.42 dBW/kg Date: 2015-1-6 Test Laboratory: HUAWEI SAR/HAC Lab Che2-L12 GSM850 251CH Right hand touch cheek with battery 2# DUT: Che2-L12; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 848.8 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 849 MHz; σ = 0.883 S/m; ε r = 41.129; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.09, 9.09, 9.09); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Head/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.289 W/kg Configuration/Head/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.754 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.341 W/kg SAR(1 g) = 0.269 W/kg; SAR(10 g) = 0.203 W/kg Maximum value of SAR (measured) = 0.295 W/kg 0 dB = 0.289 W/kg = -5.39 dBW/kg Date: 2015-1-2 Test Laboratory: HUAWEI SAR/HAC Lab Che2-L12 GSM850 190CH Back side 15mm DUT: Che2-L12; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.953 S/m; ε r = 55.283; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.06, 9.06, 9.06); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.383 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.67 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.438 W/kg SAR(1 g) = 0.352 W/kg; SAR(10 g) = 0.272 W/kg 0 dB = 0.383 W/kg = -4.17 dBW/kg Date: 2015-1-2 Test Laboratory: HUAWEI SAR/HAC Lab Che2-L12 GSM850 190CH Back side 15mm with battery 2# DUT: Che2-L12; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.953 S/m; ε r = 55.283; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.06, 9.06, 9.06); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.410 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.27 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.467 W/kg SAR(1 g) = 0.370 W/kg; SAR(10 g) = 0.285 W/kg Maximum value of SAR (measured) = 0.405 W/kg 0 dB = 0.410 W/kg = -3.87 dBW/kg Date: 2015-1-2 Test Laboratory: HUAWEI SAR/HAC Lab Che2-L12 GSM850 GPRS 2TS 190CH Back side 10mm DUT: Che2-L12; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-2TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:4.10015 Medium parameters used: f = 837 MHz; σ = 0.953 S/m; ε r = 55.283; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.06, 9.06, 9.06); Calibrated: 2014-7- 24; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn851; Calibrated: 2014-7-24 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.555 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.85 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.636 W/kg SAR(1 g) = 0.507 W/kg; SAR(10 g) = 0.392 W/kg 0 dB = 0.555 W/kg = -2.56 dBW/kg Date: 2015-1-2 Test Laboratory: HUAWEI SAR/HAC Lab Che2-L12 GSM850 GPRS 2TS 190CH Back side 10mm with battery 2# DUT: Che2-L12; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-2TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:4.10015 Medium parameters used: f = 837 MHz; σ = 0.953 S/m; ε r = 55.283; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3744; ConvF(9.06, 9.06, 9.06)…

Text truncated - open the document above for the full version.

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Product Name: Smart Phone Model: Che2-L12 Report No.: SYBH(Z-SAR)021122014-2 FCC ID: QISCHE2-L12 APPROVED (Lab Manager) PREPARED (Test Engineer) BY DATE 2015-01-22 2015-01-22 The test results of this test report relate exclusively to the item(s) tested . The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report No.: SYBH(Z-SAR)021122014-2 FCC ID:QISCHE2-L12 2015-01-22 Page 2 of 65 Table of Contents 1 General Information ............................................................................................................................................... 4 1.1 Statement of Compliance .............................................................................................................................. 4 1.2 RF exposure limits ......................................................................................................................................... 5 1.3 EUT Description ............................................................................................................................................ 6 1.3.1 General Description ............................................................................................................................... 7 1.4 Test specification(s) ...................................................................................................................................... 8 1.5 Testing laboratory .......................................................................................................................................... 8 1.6 Applicant and Manufacturer .......................................................................................................................... 8 1.7 Application details .......................................................................................................................................... 8 1.8 Ambient Condition ........................................................................................................................................ 8 2 SAR Measurement System ................................................................................................................................... 9 2.1 SAR Measurement Set-up ............................................................................................................................ 9 2.2 Test environment ......................................................................................................................................... 10 2.3 Data Acquisition Electronics description .................................................................................................... 10 2.4 Probe description ......................................................................................................................................... 11 2.5 Phantom description .................................................................................................................................... 12 2.6 Device holder description ............................................................................................................................ 13 2.7 Test Equipment List ..................................................................................................................................... 14 3 SAR Measurement Procedure ............................................................................................................................ 15 3.1 Scanning procedure .................................................................................................................................... 15 3.2 Spatial Peak SAR Evaluation ...................................................................................................................... 16 3.3 Data Storage and Evaluation ...................................................................................................................... 17 4 System Verification Procedure ............................................................................................................................ 19 4.1 Tissue Verification ....................................................................................................................................... 19 4.2 System Check ............................................................................................................................................. 22 4.3 System check Procedure............................................................................................................................. 23 5 SAR measurement variability and uncertainty .................................................................................................... 24 5.1 SAR measurement variability ...................................................................................................................... 24 5.2 SAR measurement uncertainty ................................................................................................................... 24 6 SAR Test Configuration ....................................................................................................................................... 25 6.1 GSM Test Configuration .............................................................................................................................. 25 6.2 UMTS Test Configuration ......................................................................…

Text truncated - open the document above for the full version.

Justification of the extended calibration of Dipole D 835V2 SN:4d059 Per KDB 865664, we have Measured the Impedance and Return Loss as below, and the r etur n los s is <-20dB, with 20% of prior calibration; t he real or imaginary parts of t he impedance is with 5 ohm of prior calibr ation . Therefore the verification result should support extended calibration. Dipole835Head TST Target Value Measured Value Difference Impedance transformed to feed point 51.7Ω-2.7jΩ 50.43Ω-2.79jΩ R=-1.27Ω, X=-0.09Ω Return Loss -30.2dB -30.16dB 0.13% Dipole835 Body TST Target Value Measured Value Difference Impedance transformed to feed point 47.1Ω-4.7jΩ 46.74Ω-4.96jΩ R=-0.36Ω, X=-0.26Ω Return Loss -24.9dB -24.63dB 1.08% Measured Date 2013-05-02 2014-05-01 ----- Impedance Test-Head Return Loss Test-Head

FCC RF Test Report Product Name: Smart Phone Model Number: HUAWEI G735-L03 Report No: SYBH(Z-RF)045092014-2001 FCC ID：QISG735-L03 Reliability Laboratory of Huawei T…

Text truncated - open the document above for the full version.