QISCRFU-800ABCDMA Radio Frequency Unit

1 CRFU Maintenance Guide Issue Date 2 Huawei Technologies Co., Ltd. Copyright © Huawei Technologies Co., Ltd. 2008. All rights reserved. Trademarks and Permissions Notice Contents 1 Replacing the CRFU................................................................................................................... 3 Step 1 ................................................................................. 4 Step 2 Block the carriers......................................................................................................... 4 Step 3 Power off the AC surge protection box................................................................... 5 Step 4 Remove the faulty CRFU............................................................................................ 5 Step 5 Install the new CRFU.................................................................................................. 6 Step 6 Power on the AC surge protection box.................................................................... 6 Step 7 Load the CPU software and FPGA software of the RRU3606.............................. 6 3 Step 8 Unblock the carriers.................................................................................................... 7 Step 9 Ensure that the new CRFU module is functional.................................................. 7 Postrequisite......................................................................................................................................... 7 1 Replacing the CRFU Prerequisite z z Context shows cable connections of the CRFU 4 Procedure Step 1 Step 2 Block the carriers. 5 Step 3 Power off the AC surge protection box. Step 4 Remove the faulty CRFU. z z z 6 Step 5 Install the new CRFU. z z ·· z Step 6 Power on the AC surge protection box. Step 7 Load the CPU software and FPGA software of the RRU3606. 7 z z Step 8 Unblock the carriers. Step 9 Ensure that the new CRFU module is functional. Postrequisite

Huawei Technologies Co., Ltd. Address: Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, Post ZIP: 518129 P.R China To: CETECOM Fax: NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89650863 Email address: [email protected] Web:www.huawei.com Subject: Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISCRFU-800AB to be kept confidential: 1 Schematic diagram 2 Block Diagram. 3 Parts list (BOM) Information. 4 Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2011-01-25 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISCRFU-800AB Product Name: CDMA Radio Frequency Unit Product Model: CRFU-800AB To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public. CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Zhang XingWei Regulation Compliance Manager Print name Signature Title

文档名称 文档密级 2011-1-24 华为机密，未经许可不得扩散 第1页, 共3页 Front view of CRFU-800AB Rear view of CRFU-800AB 文档名称 文档密级 2011-1-24 华为机密，未经许可不得扩散 第2页, 共3页 Left Side view of CRFU-800AB Right Side view of CRFU-800AB 文档名称 文档密级 2011-1-24 华为机密，未经许可不得扩散 第3页, 共3页 Bottom view of CRFU-800AB Top view of CRFU-800AB

文档名称 文档密级 2011-1-24 华为机密，未经许可不得扩散 第1页, 共1页

FCC Maximum Permissible Exposure (MPE) Estimation Report Product Name: CDMA Radio Frequency Unit Model Number: CRFU-800AB Report No: SYBH(R) 001122010 EB-2 FCC ID: QISCRFU-800AB Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC MPE Estimation Report of CRFU-800AB FCC ID: QIS CRFU-800AB Security Level: Public Report No: SYBH(R)001122010 EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total12 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC MPE Estimation Report of CRFU-800AB FCC ID: QIS CRFU-800AB Security Level: Public Report No: SYBH(R)001122010 EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total12 REPORT ON FCC Maximum Permissible Exposure (MPE) Estimation of CDMA Radio Frequency Unit Model Number: CRFU-800AB Report No: SYBH(R) 001122010 EB-2 FCC ID: QIS CRFU-800AB REGULATION FCC 47CFR Part 1 (10-1-07 Edition) OET Bulletin 65 (Edition 97-01) CONCLUSION COMPLIANT General Manager 2010-12-28 Zhang Xinghai Date (y-m-d) Name Signature Technical Responsibility For Area of Testing 2010-12-28 Hu Jun Date (y-m-d) Name Signature Test Lab Engineer 2010-12-28 Liang Changguan Date (y-m-d) Name Signature FCC MPE Estimation Report of CRFU-800AB FCC ID: QIS CRFU-800AB Security Level: Public Report No: SYBH(R)001122010 EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total12 Contents 1 EUT Information ................................................................................................................................5 1.1 PRODUCT DESCRIPTION................................................................................................................5 1.2 TECHNICAL DESCRIPTION OF EUT.................................................................................................5 2 FCC RF Exposure Requirements .....................................................................................................6 2.1 FCC ROUTINE ENVIRONMENTAL EVALUATION.................................................................................6 2.2 MAXIMUM PERMISSIBLE EXPOSURE (MPE)....................................................................................8 3 RF Exposure Evaluation...................................................................................................................9 3.1 PREDICTION OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS.......................................................9 3.2 CALCULATION OF THE SAFE DISTANCE...........................................................................................9 4 Location of BTS Antennas.............................................................................................................11 4.1 EXCLUSIONS ZONES....................................................................................................................11 4.2 GUIDELINES ON ARRANGING ANTENNA SITES................................................................................11 FCC MPE Estimation Report of CRFU-800AB FCC ID: QIS CRFU-800AB Security Level: Public Report No: SYBH(R)001122010 EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total12 1 EUT Information 1.1 Product Description CRFU is used for up-conversion and down-conversion of signals and for power amplification. The CRFU performs the following functions: • On the forward link, implementing up-conversion and power amplification for modulated transmitted signals and filtering the transmitted signals to make them meet the requirements of the air interface protocol • On the reverse link, filtering the signals received by the antenna to suppress out-band interference and then performing low noise amplification, down-conversion, and channel-selective filtering. 1.2 Technical Description of EUT Table 1. Service and Test Mode List Operating frequency band: Band Class 0: Uplink (RX): 824 to 849 MHz Downlink (TX): 869 to 894 MHz Maximum power input to the antenna: Band Class 0: a) one carrier: 42.25dBm (for cdma2000 1X) 42.57dBm (for cdma2000 1X EV-DO) b) two carriers:45.45 dBm (for cdma2000 1X) 45.15 dBm (for cdma2000 1X EV-DO) c) three carriers:47.08 dBm (for cdma2000 1X) 46.92 dBm (for cdma2000 1X EV-DO) b) three carriers:48.44 dBm (for cdma2000 1X) 48.42 dBm (for cdma2000 1X EV-DO) Note: The maximum 48.44 dBm is used fo…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: CDMA Radio Frequency Unit Model Number: CRFU-800AB Report No: SYBH(R)001122010EB-1 FCC ID: QISCRFU-800AB Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total41 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total41 REPORT ON FCC Test of CDMA Radio Frequency Unit Model Name: CRFU Report No: SYBH(R) 001122010EB-1 REGULATION 47 CFR FCC Part 2, Subpart J FCC CFR47 Part 22: Subpart H; CONCLUSION PASSED General Manager 2010-12-28 Zhang Xinghai Date (y-m-d) Name Signature Technical Responsibility For Area of Testing 2010-12-28 Hu Jun Date (y-m-d) Name Signature Test Lab Engineer 2010-12-28 Liang Changguan Date (y-m-d) Name Signature FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total41 Contents 1 Summary............................................................................................................................................5 2 Product Description...........................................................................................................................6 2.1 PRODUCTION INFORMATION OF THE EQUIPMENT UNDER TEST (EUT)...................................................6 2.2 MODIFICATION INFORMATION...........................................................................................................6 3 Test Site Description..........................................................................................................................7 3.1 TESTING PERIOD............................................................................................................................7 3.2 APPLIED STANDARDS......................................................................................................................8 4 Product Description...........................................................................................................................9 4.1 TECHNICAL CHARACTERISTICS.........................................................................................................9 4.2 EUT IDENTIFICATION LIST.............................................................................................................11 5 Main Test Instruments ......................................................................................................................12 6 Transmitter Measurements..............................................................................................................13 6.1 MAXIMUM CHANNEL POWER..........................................................................................................14 6.2 MODULATION CHARACTERISTICS....................................................................................................19 6.3 OCCUPIED BANDWIDTH.................................................................................................................22 6.4 BAND EDGES COMPLIANCE............................................................................................................25 6.5 SPURIOUS EMISSION AT ANTENNA TERMINAL...................................................................................28 6.6 RADIATED SPURIOUS EMISSION.....................................................................................................32 6.7 FREQUENCY STABILITY.................................................................................................................36 7 System Measurement Uncertainty ....................................................................................................40 8 Appendices......................................................................................................................................41 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total41 …

Text truncated - open the document above for the full version.

FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total81 Appendix A Modulation Characteristic Measurement According to CFR 47 (FCC) part 2.1047 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total81 CDMA2000 1X: RC1 Channel 1 Offset 41.2 dB BS,1X,C0 :CODE POWER A LVL Ref 71.2 dBm Ref 71.2 dBm Ref 71.2 dBm RESULT SUMMARY TABLE Offset 41.2 dBPCG 0 B LVL 3DB Att* 55 dB Att* 55 dB Ref 71.2 dBm Ref 71.2 dBm Ref 71.2 dBm Att* 55 dB Att* 55 dB 1 CLRWR dB PICHPCG 0 1 CLRWR TRG Start Code 0 4 Code/Stop Code 63 CF 870.03 MHz* 3DB CF 870.03 MHz * EXT Chan 17.64 Chan 17.64 SR 19.2 ksps SR 19.2 ksps -63 -56 -49 -42 -35 -28 -21 -14 -7 RESULTS FOR SET 0 PCG 0:GLOBAL RESULTS FOR SET 0: Total PWR42.34 dBm Carr Freq Error-813.13 mHz Pilot PWR35.34 dBm Carr Freq Error-0.00 ppm RHO0.97805 Chip Rate Error-0.27 ppm Composite EVM14.98 % Trg to Frame-1.224504 μs Pk CDE (SF 64)-29.95 dB Active Channels9 IQ Imbal/Offset0.30/0.21 % CHANNEL RESULTS: ModulationBPSK Symbol Rate19.2 ksps Timing Offset -.-- ns Channel.SF17.64 Phase Offset -.-- mrad Channel Power Rel-3.40 dB Channel Power Abs31.94 dBm Symbol EVM7.00 % rms Symbol EVM10.61 % Pk Date: 21.DEC.2010 16:06:20 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total81 Channel 311 Offset 41.2 dB BS,1X,C0 :CODE POWER A LVL 3DB Ref 71.2 dBm Ref 71.2 dBm Ref 71.2 dBm RESULT SUMMARY TABLE CF 879.33 MHzOffset 41.2 dBPCG 0 B LVL 3DB Att* 55 dB Att* 55 dB Ref 71.2 dBm Ref 71.2 dBm Ref 71.2 dBm Att* 55 dB Att* 55 dB 1 CLRWR CF 879.33 MHzdB PICHPCG 0 Start Code 0 4 Code/Stop Code 63 1 CLRWR EXT Chan 17.64 Chan 17.64 SR 19.2 ksps SR 19.2 ksps TRG -63 -56 -49 -42 -35 -28 -21 -14 -7 RESULTS FOR SET 0 PCG 0:GLOBAL RESULTS FOR SET 0: Total PWR42.47 dBm Carr Freq Error-1.09 Hz Pilot PWR35.48 dBm Carr Freq Error-0.00 ppm RHO0.98324 Chip Rate Error-0.27 ppm Composite EVM13.05 % Trg to Frame-1.241276 μs Pk CDE (SF 64)-31.57 dB Active Channels9 IQ Imbal/Offset0.89/0.36 % CHANNEL RESULTS: ModulationBPSK Symbol Rate19.2 ksps Timing Offset -.-- ns Channel.SF17.64 Phase Offset -.-- mrad Channel Power Rel-3.34 dB Channel Power Abs32.15 dBm Symbol EVM7.55 % rms Symbol EVM18.25 % Pk Date: 21.DEC.2010 16:00:36 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total81 Channel 596 A B 3DB EXT 3DB TRG Offset 41.2 dB Ref 55.0 dBm Ref 55.0 dBm Ref 55.0 dBm 1 CLRWR BS,1X,C0 :CODE POWER CF 887.88 MHzdB PICH Chan 17.64 PCG 0 Start Code 0 4 Code/Stop Code 63 LVL Ref 55.0 dBm Ref 55.0 dBm Ref 55.0 dBm 1 CLRWR RESULT SUMMARY TABLE CF 887.88 MHzOffset 41.2 dB Chan 17.64 PCG 0 LVL Att 40 dB Att 40 dB SR 19.2 ksps Att 40 dB Att 40 dB SR 19.2 ksps -63 -56 -49 -42 -35 -28 -21 -14 -7 RESULTS FOR SET 0 PCG 0:GLOBAL RESULTS FOR SET 0: Total PWR41.56 dBm Carr Freq Error2.46 Hz Pilot PWR34.48 dBm Carr Freq Error0.00 ppm RHO0.97520 Chip Rate Error-0.33 ppm Composite EVM15.95 % Trg to Frame-1.075902 μs Pk CDE (SF 64)-30.46 dB Active Channels9 IQ Imbal/Offset0.05/0.23 % CHANNEL RESULTS: ModulationBPSK Symbol Rate19.2 ksps Timing Offset -.-- ns Channel.SF17.64 Phase Offset -.-- mrad Channel Power Rel-3.26 dB Channel Power Abs31.22 dBm Symbol EVM9.07 % rms Symbol EVM17.01 % Pk Date: 21.DEC.2010 16:17:39 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total81 RC3 Channel 1 Offset 41.2 dB Ref 55.0 dBm Ref 55.0 dBm Ref 55.0 dBm Att 40 dB Att 40 dB 1 CLRWR BS,1X,C0 :CODE POWERSR 19.2 ksps CF 870.03 MHzdB PICH Chan 17.64 PCG 0 Start Code 0 4 Code/Stop Code 63 A TRG LVL 3DB Ref 55.0 dBm Ref 55.0 dBm Ref 55.0 dBm Att 40 dB Att 40 dB 1 CLRWR RESULT SUMMARY TABLESR 19.2 ksps CF 870.03 MHzOffset 41.2 dB Chan 17.64 PCG 0 B LVL 3DB EXT -63 -56 -49 -42 -35 -28 -21 -14 -7 RESULTS FOR SET 0 PCG 0:GLOBAL RESULTS FOR SET 0: Total PWR42.42 dBm Carr Freq Error-858.85 mHz Pilot PWR35.38 dBm Carr Freq Error-0.00 ppm RHO0.99103 Chip Rate Error0.17 ppm Composite EVM9.51 % Trg to Frame-772.546230 ns Pk CDE (SF 64)-34.98 dB Active Channels9 IQ Imbal/Offset0.58/0.17 % CHANNEL RESULTS: ModulationQPSK Symbol Rate19.2 ksps Timing Offset -.-- ns Channel.SF17.64 Phase Offset -.-- mrad Channel Power Rel-3.26 dB Channel Power Abs32.12 dBm Symbol EVM5.14 % rms Symbol EVM10.82 % Pk Date: 17.DEC.2010 16:35:32 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Public Report No: SYBH(R)001122010EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total81 Channel 311 Offset 41.2 dB Ref 55.0 dBm Ref 55.0 dBm Ref 55.0 dBm Att 40 dB Att 40 dB 1 CLRWR BS,1X,C0 :CODE POWERSR 19.2 ksps CF 879.33 MHzdB PICH Chan 17.64 PCG 0 Start Code 0 4 Code/Stop Code 63 A TRG LVL 3DB Ref 55.0 dBm Ref 55.0 dBm Ref 55.0 dBm Att 40 dB Att 40 dB 1 CLRWR RESULT SUMMARY TABLESR 19.2 ksps CF 879.33 MHzOffset 41.2 dB Chan 17.64 PCG 0 B LVL 3DB EXT -63 -56 -49 -42 -35 -28 -21 -14 -7 RESULTS FOR SET 0 PCG 0:GLOBAL RESULTS FOR SET 0: Total PWR42.47 dBm Carr Freq Error-145.13 mHz Pilot PWR35.42 dBm Carr Freq Error-0.00 ppm RHO0.98621 Chip Rate Error0.14 ppm Composite EVM11.83 % Trg to Frame-788.701072 ns Pk CDE (SF 64)-32.08 dB Active Channels9 IQ Imbal/Offset0.20/0.14 % CHANNEL RESULTS: ModulationQPSK Symbol Rate19.2 ksps Timing Offset -.-- ns Channel.SF17.64 Phase Offset -.-- mrad Channel Power Rel-3.25 dB Channel Power Abs32.17 dBm Symbol EVM6.33 % rms Symbol EVM11.23 % Pk Date: 17.DEC.2010 16:56:37 FCC Test Report of CRFU-800AB FCC ID: QISCRFU-800AB Security Level: Pu…

Text truncated - open the document above for the full version.

1 Radiated Disturbance/ Radiated Spurious Emission (30MHz-1GHz) ......................................2 2 Radiated Spurious Emission (above 1GHz)..............................................................................2 1 Radiated Disturbance/ Radiated Spurious Emission (30MHz-1GHz) 2 Radiated Spurious Emission (above 1GHz)