QISDC750High Definition Digital Transport Adapter

One coaxial cable DC750 High Definition Digital Transport Adapter One HD-uDTA Quick Start One power adapter Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Two AAA batteriesOne Quick Start Quick Start Issue: 01 (2011-10-15) Part Number: 96720718 Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. LICENSE NOTICE & TRADEMARK ACKNOWLEDGEMENT Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. COPYRIGHT NOTICE AND WARRANTY DISCLAIMER This product includes free software NetBSD bcopy.S,v 1.8.2.1 owned by Carnegie Mellon University and released under the license which can be found at http://www.cs.cmu.edu/~410/licenses.html. Mach Operating System Copyright © 1993 Carnegie Mellon University All Rights Reserved. This product includes free software ZLib 1.2.3 owned by Jean-loup Gailly and Mark Adler and released under the Zlib License which can be found at http://www.opensource.org/licenses/zlib-license.php. Copyright © 1995-2005, Jean-loup Gailly and Mark Adler. WARRANTY DISCLAIMER All open source software are provided by their respective copyright holders and contributors on an “as is” basis, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. 06 Using the HD-uDTA for the First Time Step 2 Back of TV 2 4 3 Step 3 75 Back of TV 698 06 Using the HD-uDTA for the First Time 1. Disconnect the coaxial cable currently connected to the TV set. 2. Connect the coaxial cable to the Cable In port on the back of the HD-uDTA. 3. (Optional) Connect one end of the short coaxial cable (provided in the kit) to the Cable ln or RF In port on the back of TV set. 4. (Optional) Connect the other end of the short coaxial cable to the To TV port on the back of the HD-uDTA. 5. Connect one end of an HDMI cable to the HDMI In port on the back of the TV set. 6. Connect the other end of the HDMI cable to the HDMI port on the back of the HD-uDTA. 7/8. (Optional) Set the TV and the HD-uDTA to the same channel. 9. Connect the power adapter (provided in the kit) to the +5V DC In port of the HD-uDTA 10. Connect the power adapter to a working power socket, extension cord or surge protector. Wait for the HD-uDTA to start and search for channels. You are now ready to watch programs. Power on the HD-uDTA and the TV. a. (Optional) Adjust the audio/video mode of the TV. The method varies with TV types. Typically, you can press the TV/AV key on the TV remote control. b. (Optional) Tune the TV and the HD-uDTA to the same channels. Tune the TV to channel 3 or channel 4. Set the Ch3/Ch4 switch to Ch3 if you have tuned the TV to channel 3 and Ch4 if you have tuned the TV to channel 4. Step 4 01 Packing List One remote control One HDMI cable(optional) Welcome to use DC750 High Definition Digital Transport Adapter (HD-uDTA for short)! Environmental Requirements Place the device in a well-ventilated place. Do not expose the device to direct sunlight. Keep the device clean, free of dust and stains. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus. Place the device on a stable surface. Do not place any object on the top of the device. Do not place the device on or near flammable materials such as foam. Keep the device away from heat source or fire, such as a radiator or a candle. Keep the device away from any household appliances with strong magnetic fields or electromagnetic fields, such as microwave oven, refrigerator, or mobile phone. Operation Requirements Make sure that the device and any connecting wires/cables do not get wet. If any liquid, such as water or coffee, gets into the device or on any connecting wires/cables, disconnect the power adapter from the socket immediately and unplug all the cables connected to the device, such as the power cable and…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date: October 19, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISDC750 ATTESTATION FCC ID: QISDC750 Product: Cable Set Top Box Model: DC750 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

RF_160, Issue 02 Huawei Technologies Co.,Ltd Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 City: ......... SHENZHEN ................................................................ Country:.........China ............................................................................ Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Cable Set Top Box Type designation: DC750 on our behalf. Date: 2011/11/03 City: SHENZHEN Name: Zhang Xinghai (2) Function: Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Huawei Technologies Co.,Ltd Date: November 3, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISDC750 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen China Attestation for FCC Declaration of Conformity FCC ID: QISDC750 Date: 2011/11/11 Please be notified that we, the undersigned, Huawei Technologies Co.,Ltd declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DOC. The test report number supporting the DOC is 11B131R-AVUSP02V01 Testing in regards to this report was done by QuieTek Corp., located at No.5-22, Rueishu Keng, Rueiping Tsuen, Linkou Shiang, Taipei County 244, Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen China Supercede Request Statement Dear sirs or madams of Federal Communications Commission. Regarding our finished application under FCC ID: QISDC750, there we need to do the following supercede action: The replacement of the test report and RF Exposure. We just change the product name from Cable Set Top Box to High Definition Digital Transport Adapter on the test report and RF Exposure. And the others are all the same. Could you kindly allow us to do supercede action? Sincerely, Name / Title: Zhang Xinghai/manager Company: Huawei Technologies Co.,Ltd Tel: +86-755-2878-1879 Fax: +86-755-2878-1889 Email: [email protected]

Huawei Technologies Co.,Ltd Date: November 25, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISDC750 ATTESTATION We Huawei Technologies Co.,Ltd, states that we want to change the product name from Cable Set Top Box to High Definition Digital Transport Adapter Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

1. EUT Photograph (1) EUT Photo (2) EUT Photo Report No：11BS006R-RF-US-P05V01 Page: 2 of 6 (3) EUT Photo (4) EUT Photo Report No：11BS006R-RF-US-P05V01 Page: 3 of 6 (5) EUT Photo(remote control ) (6) EUT Photo (HDMI Cable) Report No：11BS006R-RF-US-P05V01 Page: 4 of 6 (7) EUT Photo (8) EUT Photo (Adapter #1) Report No：11BS006R-RF-US-P05V01 Page: 5 of 6 (9) EUT Photo (Adapter #1) (10) EUT Photo (Adapter #2) Report No：11BS006R-RF-US-P05V01 Page: 6 of 6 (11) EUT Photo (Adapter #2)

Bottom View

(1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo

RF Exposure Evaluation Declaration Product Name : High Definition Digital Transport Adapter Model No. : DC750 FCC ID : QISDC750 Applicant : HUAWEI TECHNOLOGIES CO.,LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 02/11/2011 Issued Date : 11/11/2011 Report No. : 11BS006R-RF-US Report Version : V2.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 11BS006R-RF-US Page: 2 of 5 Test Report Certification Issued Date : 11/11/2011 Report No. : 11BS006R-RF-US Product Name : High Definition Digital Transport Adapter Applicant : HUAWEI TECHNOLOGIES CO.,LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO.,LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : DC750 FCC ID : QISDC750 EUT Voltage : 5V DC Brand Name : HUAWEI, SuddenLink Applicable Standard : FCC OET 65 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Jame Yuan) Approved By : (Engineering Manager: Marlin Chen) Report No： 11BS006R-RF-US Page: 3 of 5 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No： 11BS006R-RF-US Page: 4 of 5 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No： 11BS006R-RF-US Page: 5 of 5 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : High Definition Digital Transport Adapter Test Item : RF Exposure Evaluation Test Site : AC-6 Antenna Gain: Antenna Gain: The maximum Gain measured in fully anechoic chamber is 4.45dBi o for 2.4G. Output Power into Antenna & RF Exposure Evaluation Distance: Test Mode Frequency Band (MHz) Maximum Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) ZigBee 2425,2450,2475 1.2589 0.000698 Note: The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2.

FCC Part15.247 Test Report Product Name : High Definition Digital Transport Adapter Model No. : DC750 FCC ID : QISDC750 Applicant : HUAWEI TECHNOLOGIES CO.,LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 02/11/2011 Test Date : 03/11/2011~ 10/11/2011 Issued Date : 11/11/2011 Report No. : 11BS006R-RF-US-P05V01 Report Version : V2.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No：11BS006R-RF-US-P05V01 Page: 2 of 60 Test Report Certification Issued Date : 11/11/2011 Report No. : 11BS006R-RF-US-P05V01 Product Name : High Definition Digital Transport Adapter Applicant : HUAWEI TECHNOLOGIES CO.,LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO.,LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : DC750 FCC ID : QISDC750 EUT Voltage : 5V DC Brand Name : HUAWEI, SuddenLink Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2009 ANSI C63.4: 2009; ANSI C63.10: 2009 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Jame Yuan) Approved By : (Engineering Manager: Marlin Chen) Report No：11BS006R-RF-US-P05V01 Page: 3 of 60 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No：11BS006R-RF-US-P05V01 Page: 4 of 60 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................6 1.1. EUT Description ......................................................................................................6 1.2. Mode of Operation...................................................................................................8 1.3. Tested System Details .............................................................................................9 1.4. Configuration of Tested System .............................................................................10 1.5. EUT Exercise Software.......................................................................................... 11 2. Technical Test ........................................................................................................12 2.1. Summary of Test Result.........................................................................................12 2.2. Test Environment...................................................................................................13 3. Conducted Emission..............................................................................................14 3.1. Test Equipment......................................................................................................14 3.2. Test Setup..............................................................................................................14 3.3. Limit.......................................................................................................................15 3.4. Test Procedure......................................................................................................15 3.5. Uncertainty ............................................................................................................15 3.6. Test Result.............................................................................................................16 4. Radiated Emission.................................................................................................18 4.1. Test Equipment......................................................................................................18 4.2. Test Setup..............................................................................................................19 4.3. Limit.......................................................................................................................20 4.4. Test Procedure................................................................................…

Text truncated - open the document above for the full version.

Test Setup Photograph Description: Front View of Conducted Emission Test Setup Description: Back View of Conducted Emission Test Setup Description : Radiated Emission Test Setup for Below 1GHz Description : Radiated Emission Test Setup for 1~18GHz Description : Radiated Emission Test Setup for Above 18GHz