QISE220HSDPA USB Modem

1 Welcome to E220 HSDPA USB Modem from Huawei. E220 provides the following functions: y Accessing the Internet y SMS y Contacts Note: This manual only briefly introduces the basic functions of E220. For detailed functions, refer to Huawei E220 HSDPA USB Modem User Manual. Getting E220 Ready 1) Take out the USIM/SIM card slot from E220, and then place the USIM/SIM card into the slot, as shown in the following figure. Make sure that the USIM/SIM card is fully in place. 2) Insert the slot into E220, as shown in the following figure. Install Guide The installation procedures of the E220 Manager may differ under different operating systems (OSs) such as Windows XP and Windows 2000. Refer to the actual install tips if there is any difference. 1. Connecting E220 HSDPA USB Modem with a PC Note: First, start up your computer. Then connect E220 with the computer. Otherwise, the normal installation of your E220 can be affected. The sketch map for the data cable is as shown. Auxiliary USB data cable Mini-USB data cable Mini-USB connector 2 1) Insert the Mini-USB connector of the data cable into the USB modem. 2) Insert the connector of the main and the auxiliary USB data cables into the USB interface of the PC. 3) The system auto detects and recognizes new hardware and displays on the status area of the desktop, indicating the connection between E220 and the PC is successful. 2. Installing the E220 Manager 1) Connect E220 to a PC. The install program will auto start. If the auto-run program does not respond, you can go to the E220 drive path to double-click the AutoRun.exe file, and then the program will auto run. 2) Install the program according to the prompts on the screen. Note: Do not plug or unplug E220 in the installation process. 3) After successful installation, a shortcut icon for E220 is displayed on the desktop. 3. Removing E220 3 To remove E220, use the hardware deleting function of the Windows system to stop E220 and then pull it out. 1) Double-click on the status area of the desktop; the "Safely Remove Hardware" prompt will be displayed. 2) Stop the E220 hardware "USB Mass Storage Device". 3) At the prompt, pull E220 out. Introduction to the E220 Manager Interface 1. Accessing the E220 Manager Interface Double-click on the desktop to start the E220 Manager. If the system prompts you to enter a PIN, enter the correct one. 2. Introduction to the Icons /: Connect/Disconnect the network connection. : Open the default browser of the OS. : Access the SMS window. : Access the contacts window. Internet Service 1. Network Connection Settings To create a new profile: 1) Select Settings > Network Connection Settings. 2) Click New. 3) Enter the profile name and the parameters. 4) Click Save. Note: For the detailed parameters, consult the local network operator. 2. Connecting to the Internet 1) Click to connect to the network. When the connection is created, the current connection information will be displayed on the right pane of the window, including connect duration, data volumes, received and sent volumes, rate and the top rate. 4 2) Click to open the browser. 3) Click to disconnect the network connection. SMS 1. Creating SMS 1) Click to access the SMS window. 2) Click Write. 3) Enter one or more telephone numbers and the SMS contents. 4) Click Send. Note: While entering telephone number, you can click Contacts to search for and add numbers. 2. Viewing SMS You can select Settings > Options > SMS Alerts to set the prompt methods for a new message. You can select Alert tone or Alert window. If Alert tone is selected, when there is a new message, you will hear a prompt. 1) Click to access the SMS window. 2) Click Inbox to view the messages. If Alert window is selected, when there is a new message, a prompts window will be displayed. Click View to view the message or click Close to view it later. 3. SMS Settings Select Settings > SMS Settings for the following settings. y Reports: to set whether ask for a delivery report. y Use the same SMS center for reply: to set the receiver to use the same SMS center number for reply. y SMS Bear Domain: to set the bear domain for sending messages. y Validity: to set the valid period during which messages can be stored in the SMS center. y SMC number: The E220 will auto read the number preset in the USIM/SIM card. If there is no SMS center number in your USIM/SIM card or you have deleted it by accident, contact your card provider to get it. 5 Contacts Service 1. Creating a New Contact 1) Click to access the Contacts Window. 2) Click New. 3) Enter name, telephone numbers, email address and comments. Then click Save. 2. Modifying Contacts 1) Click to access the Contacts window. 2) Select a contact to modify and then double-click it or click Edit. 3) After the modification, click Save. 3. Deleting Contacts 1) Click to access the Contacts window. 2) Select one or more contacts and then click Delete. 3) At the prompt, click OK. 4. Sending SMS 1) Click to access the Contacts window. 2) Select one or more contacts and then click Send. 3) In the pop-up window, select the telephone numbers you want to send a message to and then click OK.The program will jump to the window for creating a message. 4) The selected contact numbers will be displayed in the blank column of Contacts. Enter the contents of the message and then click Send. 5. Searching for a Contact 1) Click Search. y Select the search range in the Field drop-down box. y Enter the search conditions in the Va l u e text box. y Select the matching type, such as "Match Whole Word Only" and/or "Match Case". 2) Click Search Now to begin searching. 3) Click Stop Search to stop searching. 6 Safety Information Please read the safety information carefully to ensure the correct and safe use of your wireless device. General Recommendations for Use Always handle your wireless device with care and keep it in a clean and dust-free place. Do not expose your wireless device to open flames or lit tobacco products. y Always keep y…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISE220 to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei E220 HSDPA USB MODEM SECRET Page1,Total 5 External Photo of Huawei E220 Huawei E220 HSDPA USB MODEM SECRET Page2,Total 5 Huawei E220 HSDPA USB MODEM SECRET Page3,Total 5 Huawei E220 HSDPA USB MODEM SECRET Page4,Total 5 Huawei E220 HSDPA USB MODEM SECRET Page5,Total 5

Huawei E220 HSDPA USB MODEM SECRET Page1, Total 1 Label Location_E220

Huawei E220 HSDPA USB MODEM SECRET Page1,Total 5 Internal Photo of Huawei E220 Huawei E220 HSDPA USB MODEM SECRET Page2,Total 5 Huawei E220 HSDPA USB MODEM SECRET Page3,Total 5 Huawei E220 HSDPA USB MODEM SECRET Page4,Total 5 Huawei E220 HSDPA USB MODEM SECRET Page5,Total 5

Telecommunication Metrology Center of Ministry of Information Industry No. 2006E00813 Page 2 of 50 Notes 1. . The test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 2. Copies of the test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 3. The test report shall be invalid if there are no signatures of the testing person, reviewing person and approving person on it. 4. The test report shall be invalid if it is altered. 5. Any demurral about the test shall be put forward to the testing organization within 15 days after the receiving of the test report. 6. This test report standalone dose not constitute or imply by its own an approval of the product by any Certification Authorities or Competent Bodies. 7. This report is only valid if complete, and test report shall not be reproduced except in full, without written approval of the laboratory. 8. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of Telecommunication Metrology Center of MII and the Accreditation Bodies, if it applies. Address: No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China (Telecommunication Metrology Center of MII) Post code: 100083 Telephone: +86 10 62302041 Fax: +86 10 62304793 Web site: http://www.emcite.com E-mail: [email protected] Telecommunication Metrology Center of Ministry of Information Industry No. 2006E00813 Page 3 of 50 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES..........................................................................................5 2 GENERAL CONDITIONS............................................................................................................5 3 DESCRIPTION OF EUT ..............................................................................................................5 3.1 ADDRESSING INFORMATION RELATED TO EUT............................................................................................... 5 3.2 CONSTITUENTS OF EUT ................................................................................................................................. 6 3.3 GENERAL DESCRIPTION.................................................................................................................................. 7 4 OPERATIONAL CONDITIONS DURING TEST ..........................................................................7 4.1 SCHEMATIC TEST CONFIGURATION................................................................................................................. 7 4.2 SAR MEASUREMENT SET-UP.......................................................................................................................... 9 4.3 DASY4 E-FIELD PROBE SYSTEM................................................................................................................... 10 4.4 E-FIELD PROBE CALIBRATION...................................................................................................................... 11 4.5 OTHER TEST EQUIPMENT............................................................................................................................. 11 4.6 EQUIVALENT TISSUES................................................................................................................................... 12 4.7 SYSTEM SPECIFICATIONS.............................................................................................................................. 12 5 CHARACTERISTICS OF THE TEST ........................................................................................13 5.1 APPLICABLE LIMIT REGULATIONS................................................................................................................ 13 5.2 APPLICABLE MEASUREMENT STANDARDS.................................................................................................... 13 6 LABORATORY ENVIRONMENT...............................................................................................13 7 CONDUCTED OUTPUT POWER MEASUREMENT.................................................................14 7.1 SUMMARY.................................................................................................................................................... 14 7.2 CONDUCTED POWER.................................................................................................................................... 14 8 TEST RESULTS ........................................................................................................................14 8.1 DIELECTRIC PERFORMANCE......................................................................................................................... 14 8.2 SYSTEM VALIDATION.................................................................................................................................... 15 8.3 SUMMARY OF MEASUREMENT RESULTS (PCS 1900-GPRS)......................................................................... 15 8.4 SUMMARY OF MEASUREMENT RESULTS (PCS 1900-EGPRS) ...................................................................... 16 8.5 CONCLUSION................................................................................................................................................ 16 9 MEASUREMENT UNCERTAINTY ............................................................................................16 10 MAIN TEST INSTRUMENTS...................................................................................................17 11 TEST PERIOD .........................................................................................................................18 12 TEST LOCATION ....................................................................................................................18 ANNEX A： MEASUREMENT PROCESS...................................................…

Text truncated - open the document above for the full version.

FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page1, Total90 Appendix A Effective Radiated Power of Transmitter According to FCC Part 2.1046 & 24.232 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page2, Total90 Channel 512 GPRS MODE: FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page3, Total90 EDGE MODE: FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page4, Total90 Channel 661 GPRS MODE: FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page5, Total90 EDGE MODE: FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page6, Total90 Channel 810 GPRS MODE: FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page7, Total90 EDGE MODE: FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page8, Total90 Appendix B Modulation Characteristics According to FCC Part 2.1047& Part 24 Subpart E FCC ID: QISETS2551 Report No: SYBH (R)48122005EB Confidential Information of Huawei. No Distribution without Permission Page9, Total90 Channel 661(GPRS) FCC ID: QISETS2551 Report No: SYBH (R)48122005EB Confidential Information of Huawei. No Distribution without Permission Page10, Total90 Channel 661(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page11, Total90 Appendix C Occupied Bandwidth According to FCC part 2.1049 & Part 24 Subpart E FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page12, Total90 99%: Channel 512(GPRS) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page13, Total90 Channel 512(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page14, Total90 Channel 661(GPRS) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page15, Total90 Channel 661(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page16, Total90 Channel 810(GPRS) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page17, Total90 Channel 810(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page18, Total90 26dBc： Channel 512(GPRS) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page19, Total90 Channel 512(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page20, Total90 Channel 661(GPRS) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page21, Total90 Channel 661(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page22, Total90 Channel 810(GPRS) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page23, Total90 Channel 810(EDGE) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page24, Total90 Appendix D Band Edges Compliance According to FCC Part 2.1051 & 24.238 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page25, Total90 GPRS Left Edge Channel 512 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page26, Total90 Right Edge Channel 810 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page27, Total90 EDGE Left Edge Channel 512 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page28, Total90 Right Edge Channel 810 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page29, Total90 Appendix E Spurious Emission at Antenna Terminal According to FCC Part 2.1051 & 24.238 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page30, Total90 1.1 GPRS Channel 512 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page31, Total90 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page32, Total90 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page33, Total90 Channel 661 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page34, Total90 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page35, Total90 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page36, Total90 Channel 810 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page37, Total90 FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page38…

Text truncated - open the document above for the full version.

Report No: SYBH(R) 36052006EB FCC ID: QISE220 FCC TEST REPORT OF HUAWEI HSDPA USB MODEM M/N: E220 Jun. 15, 2006 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page2, Total34 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page3, Total34 Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HUAWEI HSDPA USB MODEM M/N: E220 Report No: SYBH(R) 36052006EB REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 8 items need to be tested, 8 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2006.06.15 Tang Shuanli Date Name signature Technical Responsibility For Area of Testing 2006.06.13 Zhang Xinghai Date Name signature Test Lab Engineer 2006.06.12 Zhu Yongsheng Date Name signature Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page4, Total34 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..................................................................................................................... 12 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERIP)........................................................................ 12 6.2 MODULATION CHARACTERISTICS.......................................................................................................... 15 6.3 OCCUPIED BANDWIDTH........................................................................................................................ 17 6.4 BAND EDGES COMPLIANCE.................................................................................................................. 19 6.5 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 21 6.6 RADIATED SPURIOUS EMISSION........................................................................................................... 23 6.7 FREQUENCY STABILITY........................................................................................................................ 27 7 EMC Test.................................................................................................................................................. 31 7.1 RADIATED EMISSION OF ENCLOSURE IN IDLE MODE............................................................................... 31 8 System Measurement Uncertainty......................................................................................................... 33 9 Appendixes.......................................…

Text truncated - open the document above for the full version.

FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page1, Total4 Appendix H Photos of Test Setup FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page2, Total4 1 Radiated Emissions Radiated Disturbance FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page3, Total4 2 Radiated Spurious Emissions Radiated Spurious Emission (below 1GHz) FCC ID: QISE220 Report No: SYBH (R) 36052006EB Confidential Information of Huawei. No Distribution without Permission Page4, Total4 Radiated Spurious Emission (above 1GHz)