QISE303U-6HSPA USB Stick

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use your device safely. Read this information carefully before using the device. Electronic Device Do not use your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices. Medical Device  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. For any such problems, consult your service provider.  If you are using an electronic medical device, consult the doctor or the device manufacturer to confirm whether radio waves affect the operation of this device. Potentially Explosive Atmosphere Do not use your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not use your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security  Observe local laws and regulations while using the device. To prevent accidents, do not use your wireless device while driving.  RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates.  Do not use your device while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Operating Environment  Do not use the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in malfunction of the circuit.  On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning.  While using the device, observe the local laws and regulations, and respect others' privacy and legal rights. Safety of Children Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. Accessories Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the d…

Text truncated - open the document above for the full version.

Thank you for choosing the Mobile Broa dband USB Stick. Wit h your U SB S tick, you c an a cces s a w ir eless network at high speed. Note: This manual describes t he appearance of the USB Stick, as well as the proced ures for prepa ration, installati on, and re moval. For operation details abo ut t he manage ment program, see the online help incl ude d in the management progr am. Getting to Know Your USB Stick The following figure shows the appearance of the USB Stick. It i s p rovided only for y our reference. The actual pr oduct may be different. USB Connector It c onnec ts t he USB S tic k t o a PC. Strap Hole You can ti e the cap and the USB Stick together by threading a strap through the strap holes, so that the cap will not be easily lost. Indicat or It i ndicates th e stat us of the USB Stick. Green, blinking twice every 3s: The USB Stick is powered on. Green, blinking once every 3s: The USB Stick is registering with a 2G n et work. Blue, blinking once every 3s: T he USB Stick is registering with a 3G/3G+ networ k. Green, s oli d: The U SB S tic k i s c onnecte d to a 2G n etwork. Blue, solid: The USB Stick is connected to a 3G networ k. Cyan, solid: The USB Stick is connected to a 3G+ network. Off: The USB Stick is removed. MicroSD Car d Slot It holds a microSD card. SIM/USIM Car d Slo t It holds a S ubscri be r Identity Module (SI M)/Universal Subscriber Identity Module (USIM) card. Getting Your USB Stick Ready 1. Slide the front cover t o re move it from t he USB Stick. 2 . Inser t t he S IM/U SIM card and the mic roSD c ard i nto the correspondi ng card slo ts, as shown i n t he following figure. 3 . Replace the f ront cover and slide it into place. Note: The microSD ca rd is a n optional accessory . If it is not provided in the package, you ca n buy one yourself. Ensur e t hat t he b eve led edge of th e S IM/USIM card is properly aligned with t hat of the 1 2 3 2 4 5 SIM/USIM c ard slot and t he microSD c ard i s i nserted according t o the direction a s labeled on t he microSD card slot. Do not re move the microSD or SIM/USIM c ar d when t he card is in use. Othe rwise, the ca rd as well as your USB Stick may get damaged and the data stored on t he ca rd may be corrupted. Installation/Removal Guide The proced ure for installing t he management progra m depends on the operati ng system (OS) inst alled on your PC. The following sections t ake Windows XP as an example. Connec ting the USB Stick to a PC Plug the USB Stick into the USB port of your PC. Installing the USB Stick Management Pr ogram 1. Connect t he USB S tic k wit h t he PC. 2 . The OS automatically detects and recognizes the new ha rd ware and starts t he installation wiza rd . Note: If the auto-run program does not respond, f ind the A utoRun.exe file in the driver path. Then double-click A utoRun.exe to run t he pr ogram. 3 . Follow the on-scree n instructions of the i nstallation wiza rd. 4 . After the progra m is installed, a shortcut icon for the management progra m appears on the desktop. Starting the Management Progr am After being i nstalled, the management progr am starts a utomatically. T hen every t ime the USB S tick is connecte d to t he PC, the man agement program s tarts a utomat ically. You ca n also double-click the shortc ut icon on th e desktop to star t t he man agement pr ogram. Removing the USB Stick 1. Double-click in the notification area. Then t he Unplug or Eject Hardware di alog box appear s. 2 . Select t he c orrespo nding hardware and then clic k Stop. 3 . When t he messag e "It is safe to remove the device" appears, remove the USB Stick. Uninstalling th e Management Pr ogram 1. Choose Start > Control Panel > Add or Remove Programs. 2 . Find the management p rogram a nd click Remove to uninstall the m anag ement pr ogram. Note: Exit the management progra m before uninstalling it. Version: V100R001_01 Part Number: 3101XXXX

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISE303U-6 to be kept confidential: 1. Schematic diagram . 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. W e do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2011-10-29 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISE303U-6 Product Name: HSPA USB Stick Product Model: E303U-6 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public. CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely,

E303u-6 SECRET Page1, Total5 External Photos of E303u-6 E303u-6 SECRET Page2, Total5 E303u-6 SECRET Page3, Total5 E303u-6 SECRET Page4, Total5 E303u-6 SECRET Page5, Total5

E303u-6 SECRET Page1, Total5 External Photos of E303u-6 E303u-6 SECRET Page2, Total5 E303u-6 SECRET Page3, Total5 E303u-6 SECRET Page4, Total5 E303u-6 SECRET Page5, Total5

E303u-6 SECRET Page1, Total 1 ID Label E303u-6

E303u-6 SECRET Page1, Total 1 ID Label Location_E303u-6

E303u-6 SECRET Page1, Total2 Internal Photos of E303u-6 E303u-6 SECRET Page2, Total2

E303u-6 SECRET Page1, Total2 Internal Photos of E303u-6 E303u-6 SECRET Page2, Total2

FCC EMC Test Report Product Name: HSPA USB Stick Model Number: E303u-6 Report No: SYBH(Z-EMC)056102011-2 FCC ID: QISE303U-6 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 Test Report of E303u-6 FCC ID: QISE303U-6 Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total17 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Test Report of E303u-6 FCC ID: QISE303U-6 Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total17 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Date of Receipt Test Item: Oct.18, 2011 Start Date of Test: Oct.18, 2011 End Date of Test: Oct.21, 2011 Test Result: Pass Approved By 2011-10-24 Liuchunlin Date Name Signature Reviewed By 2011-10-24 Dailinjun Date Name Signature Operator 2011-10-24 Daniel Date Name Signature Test Report of E303u-6 FCC ID: QISE303U-6 Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total17 TABLE OF CONTENT 1 General Information ............................................................................................................................. 5 1.1 EUT Description ........................................................................................................................... 5 1.2 Test Site Information .................................................................................................................... 6 1.3 Applied Standard .......................................................................................................................... 6 2 Summary of Results ............................................................................................................................. 7 3 System Configuration during EMC Test .............................................................................................. 8 3.1 Test Mode ..................................................................................................................................... 8 3.2 Configurations of Test System ..................................................................................................... 8 3.3 Cables Used during Test .............................................................................................................. 9 3.4 Associated Equipment Used during Test .................................................................................... 9 4 Electromagnetic Interference (EMI) ................................................................................................... 10 4.1 Radiated Disturbance 30MHz to 18GHz ................................................................................... 10 4.2 Conducted Disturbance 0.15 MHz to 30MHz ............................................................................ 12 5 Main Test Instruments ........................................................................................................................ 13 6 System Measurement Uncertainty .................................................................................................... 13 7 Graph and Data of Emission Test ..................................................................................................... 14 7.1 Radiated Disturbance ................................................................................................................. 14 7.2 Conducted Disturbance .............................................................................................................. 16 Test Report of E303u-6 FCC ID: QISE303U-6 Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total17 1 General Information 1.1 EUT Description EUT Description Product Name HSPA USB Stick Model Number E303u-6 Serials Number L3X2A11171100042 TX Frequency GSM850: 824MHz To 849MHz PCS1900: 1850MHz To 1910MHz WCDMA850: 824MHz To 849MHz WCDMA1900: 1850MHz To 1910MHz RX Frequency GSM850: 869MHz To 894MHz PCS1900: 1930MHz To 1990MHz WCDMA850: 869MHz To 894MHz WCDMA1900: 1930MHz To 1990MHz HW Version CD3E173M SW Version 11.126.16.14.00 EUT Accessory NA NA Remark: The above EUT’s information was declared by manufacturer. Please refer to the specifications or user’s manual for more detailed description. Test Report of E303u-6 FCC ID: QISE303U-6 Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total17 1.2 Test Site Information Site1: RELIABILITY LABORATORY OF HUAWEI …

Text truncated - open the document above for the full version.

Test Report of E303u-6 FCC ID: QISE303U-6 Security Level: secret Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Permission Page1, Total5 Photos of EUT Test Report of E303u-6 FCC ID: QISE303U-6 Security Level: secret Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total5 EUT Appearance Test Report of E303u-6 FCC ID: QISE303U-6 Security Level: secret Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total5 Photos of Test Setup Test Report of E303u-6 FCC ID: QISE303U-6 Security Level: secret Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Permission Page4, Total5 1 Radiated Emissions Radiated Disturbance （30MHz-1GHz） Radiated Disturbance （above 1GHz） Test Report of E303u-6 FCC ID: QISE303U-6 Security Level: secret Report No: SYBH(Z-EMC)056102011-2 Confidential Information of Huawei. No Distribution without Permission Page5, Total5 2 Conducted Emissions Conducted Emissions for AC Power