QISE5172S-515LTE CPE

Thank you for purchasing the CPE. This CPE brings you a high speed wireless network connection.  This document will help you understand your CPE so you can start using it right away. Please read this document carefully before using your CPE. For detailed information about the functions and configurations of the CPE, refer to the online help on the web management page that comes with the CPE. Note: You must install Adobe Reader version 6.0 or higher to read the online help. Packing List The following items are included in your CPE package. If any items are missing or damaged, please contact your local dealer. If any of the optional accessories are not included in the package, you can contact an authorized dealer to purchase them separately. Item Quantity LTE CPE 1 Power adapter 1 Quick Start Guide 1 Safety Information 1 Network cable 1 Battery (optional) 1 External antenna 1 Getting to Know Your CPE Note: The CPE function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 18 15 17 Ბ Ბ 1 Power indicator  Steady blue: The device is powered on. The power adapter is in use and working properly, or the power adapter is not in use but the battery level is high.  Alternating blue and pink: The device is powered on. The power adapter is not in use or not working properly, and the battery level is low.  Steady pink: The device is malfunctioning. Note: If your device malfunctions, power it off. Wait at least 15 minutes before you power it on again. If the problem persists, contact your dealer.  Off: The device is powered off. Ბ 2 WLAN indicator  On: WLAN function enabled  Blinking: Transmitting data through WLAN  Off: WLAN function disabled Ბ 3 WPS indicator  On: WPS function enabled  Blinking: WPS interconnection verification is in progress. This process should not take longer than 2 minutes.  Off: WPS function disabled Ბ 4 LAN indicator  On: The port is connected to a device.  Blinking: Data is being transmitted through the port.  Off: No device is connected to the port. Ბ 5 Voice indicator  On: Off-hook condition  Blinking: Incoming call  Off: On-hook condition Ბ 6 Signal indicator  On: Indicates network signal strength. Full light indicates strong signal.  Off: No network signal. Ბ 7 WLAN button Press and hold for more than 2 seconds to enable or disable the WLAN function. Ბ 8 Reset button Press and hold for more than 2 seconds to restore the device to its factory settings. Note: Restoring the default settings of the CPE will override all the previous settings. Ბ 9 WPS button After the WPS function is enabled, press and hold this button for more than 2 seconds to initiate WPS interconnection. Ბ 10 External antenna port Connect to an external antenna. Ბ 11 Power button Press this button to power the device on or off. Ბ 12 Power port Connect to the device's power adapter. Ბ 13 LAN port Connect to computers, switches, or other network devices. Ბ 14 TEL port Connect to a phone. Ბ 15 USIM card slot Accommodate a USIM card. Ბ 16 Battery compartment Install the battery. Ბ 17 Battery port Insert the battery connection cable. Ბ 18 Battery cover Note:  On: An indicator is on.  Blinking: An indicator turns on and off at regular intervals.  Off: An indicator is off.  All indicators except the power indicator are blinking: The device is being upgraded or is restarting. To avoid damage to the device, do not power off during this process. Getting Started Installing the USIM Card and the Battery Install the USIM card and the battery according to the illustration. a a b b Note:  Do not remove the USIM card when it is in use. Doing so will affect the performance of your CPE and data stored on the USIM card may be lost.  The CPE automatically charges its battery when connected to a power source.  The battery is an optional accessory. If it is not included in the package, you may contact an authorized dealer to buy a battery compatible with the CPE. Connecting to a Power Adapter Install the power adapter according to the illustration. Note:  Only use power adapters compatible with the CPE and provided by a designated manufacturer. Use of an incompatible power adapter or one from an unknown manufacturer may cause the CPE to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.  The CPE's power adapter model is HW-120100XYW, HW-120200XYW, HKA01212010-XY or HKA02412020-XY. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer. Connecting a Device to the CPE Before connecting the device, please read the safety information carefully. Note:  During thunderstorms and rainy weather, turn off and disconnect the device.  Use a standard or authorized external antenna to avoid device malfunctions. Selecting the Installation Environment Obstacles such as concrete and wooden walls will affect the transmission of the network signal. It is recommended that when you install devices you choose an open space and ensure that there are no obstructions between the computer and the device. Keep the device away from equipment that generates strong magnetic and electric fields, for instance microwaves, refrigerators, and satellite receivers. Cable Connection When connecting, use the power adapter that came as a set with the product. When finished, press the power button to turn on the device. The connection cable illustration is for reference only. When the device is in use, you can alter its position or orientation to improve signal reception. The signal strength light indicates the received signal strength. Logging In to the Web Management Page The web-based configuration utility can be used for initial device installation, parameter configuration, and function management through the browser. The Windows XP operating system and Internet Explor…

Text truncated - open the document above for the full version.

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned may be the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase. Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability. DISCLAIMER ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/en/privacy-policy/index.htm. Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.  Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Areas with flammables and explosives  Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols.  Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security  Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.  Concentrate on driving. Your first responsibility is to drive safely.  RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates.  Do not use your device while flying in an aircraft or immediately before boarding. Using wireless devices in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. Operating environment  Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.  Before connecting and disconnecting cables, stop using the device and disconnect it from the power supply. Ensure that your hands are dry during operation.  Place the device on a stable surface.  Keep the device away from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or refrigerator.  During thunderstorms, power off your device and remove all cables connected to it to protect against lightning strikes.  Do not use your device during thunderstorms to protect your device against any danger caused by lightning.  Ideal operating temperatures are 0 °C to +40 °C. Ideal storage temperatures are -20 °C to +60 °C. Extreme heat or cold may damage your device or accessories.  Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or other objects. Do not place the devi…

Text truncated - open the document above for the full version.

Letter of Agency I appoint Intertek Testing Services NA Inc. to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under the FCC rules until further notice. I further certify that no party (as defined in 1.2002 of CFR 47, 1995) to this application, including myself, is subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,853A. Equipment: E5172s-515, FCC ID: QISE5172S-515 Date: 2013-06-25 Signature: _____________________________________ Name: Zhang Xinghai Title: EMC Laboratory Manager Company: Huawei Technologies Co., Ltd. Telephone: 0086-755-89651014

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: INTERTEK Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISE5172S-515 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

E5172s-515 SECRET Page1,Total 5 External Photos of E5172s-515 E5172s-515 SECRET Page2,Total 5 E5172s-515 SECRET Page3,Total 5 E5172s-515 SECRET Page4,Total 5 E5172s-515 SECRET Page5,Total 5

E5172s-515 SECRET Page1, Total 1 ID Label Location of E5172s-515

E5172s-515 SECRET Page1, Total 1 ID Label E5172s-515 12V12A Label 12V1A Label

E5172s-515 SECRET Page1, Total6 Internal Photos of E5172s-515 E5172s-515 SECRET Page2, Total6 E5172s-515 SECRET Page3, Total6 E5172s-515 SECRET Page4, Total6 E5172s-515 SECRET Page5, Total6 E5172s-515 SECRET Page6, Total6

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Maximum Permissible Exposure(MPE) Estimation Report Product Name: LTE CPE Model: E5172s-515 Report No.: SYBH(Z-SAR)038042013-2 FCC ID: QISE5172S-515 APPROVED (Lab Manager) CHECKED PREPARED BY DATE 2013-07-04 2013-07-04 2013-07-04 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report NO.: SYBH(Z-SAR)038042013-2 FCC ID: QISE5172S-515 2013-07-04 Page 2 of 16 ※ ※ Modified History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release 2013-06-24 Sun Shaobin Rev.1.1 1) Remove the OET65c as it is invalid. 2) Update general description on page 5. 2013-07-04 Sun Shaobin Report NO.: SYBH(Z-SAR)038042013-2 FCC ID: QISE5172S-515 2013-07-04 Page 3 of 16 Table of Contents 1 EUT Description ................................................................................................................. 4 1.1 General Description ................................................................................................. 5 2 Test specification(s) ............................................................................................................ 6 3 Testing laboratory ............................................................................................................... 6 4 Applicant and Manufacturer ............................................................................................... 6 5 Application details ............................................................................................................... 6 6 Ambient Condition .............................................................................................................. 6 7 RF Exposure Requirements ............................................................................................... 7 8 RF Exposure Evaluation ................................................................................................... 10 8.1 Operation in GSM850 ............................................................................................ 10 8.2 Operation in GSM1900 .......................................................................................... 11 8.3 Operation in UMTS Band II ................................................................................... 12 8.4 Operation in UMTS Band V ................................................................................... 12 8.5 Operation in LTE Band V ...................................................................................... 12 8.6 Operation in LTE Band VII .................................................................................... 13 8.7 Operation in WLAN 2.4G ....................................................................................... 13 9 Exposure calculations for multiple sources ...................................................................... 14 9.1 Estimation for WLAN2.4G MIMO .......................................................................... 15 9.2 Estimation for GSM850& WLAN2.4G ................................................................... 15 9.3 Estimation for GSM1900& WLAN2.4G ................................................................. 15 9.4 Estimation for UMTS Band II & WLAN2.4G .......................................................... 15 9.5 Estimation for UMTS Band V & WLAN2.4G.......................................................... 16 9.6 Estimation for LTE Band V & WLAN2.4G ............................................................. 16 9.7 Estimation for LTE Band VII & WLAN2.4G ........................................................... 16 Report NO.: SYBH(Z-SAR)038042013-2 FCC ID: QISE5172S-515 2013-07-04 Page 4 of 16 1 EUT Description Device Information： DUT Name: LTE CPE Type Identification: E5172s-515 Device Type : Mobile FCC ID: QISE5172S-515 Exposure Category: Uncontrolled environment/general population Hardware Version : Router Board: CL2E5172R Modem Board: CL1E5172M Software Version : V200R001 Antenna Type : Internal Antenna, External Antenna Device Operating Configurations: Supporting Mode(s) GSM850/1900,UMTS Band II/V, LTE band V/VII, WiFi 2.4G(Tested) Test Modulation GMSK/8PSK/QPSK/16QAM/BPSK Operating Frequency Range(s) Band Tx (MHz) Rx (MHz) GSM850 824-849 869-894 GSM1900 1850-1910 1930-1990 UTMS Band II 1850-1910 1930-1990 UTMS Band V 824-849 869-894 LTE band V 824-849 869-894 LTE Band VII 2500-2570 2620-2690 WiFi 2.4G 2400-2483.5 2400-2483.5 Report NO.: SYBH(Z-SAR)038042013-2 FCC ID: QISE5172S-515 2013-07-04 Page 5 of 16 1.1 General Description E5172s-515 LTE/WCDMA/GSM three mode 9 bands CPE is subscriber equipment in the LTE/UMTS/GSM system and support Wi-Fi 802.11b/g/n. But only GSM 850、 1900,WCDMA 850、1900 and LTE Band V、Band VII testing results in this report.E5172s-515 implement such functions as RF signal receiving/transmitting, LTE/WCDMA/GSM protocol processing, data service etc. Externally it provides USIM card interface, RJ45 Ethernet interface and RJ11 telephone interface. E5172s-515 has one external antenna and four internal antennas. Two internal antennas are used for WiFi, while the external antenna and other two internal antennas are used for LTE/WCDMA/GSM. For the LTE/WCDMA/GSM internal antennas, only one was used for transmission and both for reception. Report NO.: SYBH(Z-SAR)038042013-2 FCC ID: QISE5172S-515 2013-07-04 Page 6 of 16 2 Test specification(s) ANSI Std C95.1-1992 Safety L…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: LTE CPE Model Number: E5172s-515 Report No: SYBH(Z-RF)031042013-2002 FCC ID: QISE5172S-515 Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 19 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-2. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers of test site No.1 are R-2364, G-415, C-2583, and T-256, and the accreditation numbers of test site No.2 are R-3760, G-485, C-4210 and T-1237. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 19 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2013-05-02 Start Date of Test: 2013-05-04 End Date of Test: 2013-06-16 Test Result: Pass Approved by Senior Engineer: 2013-06-24 Dai Linjun Date Name Signature Prepared by: 2013-06-24 Zhu Mingjing Date Name Signature RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 19 Modification Record No. Last Report No. Modification Description 1 --- First report. RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 19 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 3 Description of the Equipment under Test (EUT) ..................................................................................................... 8 3.1 General Description ................................................................................................................................... 8 3.2 EUT Identity ............................................................................................................................................... 8 3.3 Technical Description ................................................................................................................................. 9 4 General Test Conditions / Configurations ............................................................................................................. 10 4.1 Test Modes .............................................................................................................................................. 10 4.2 EUT Configurations .................................................................................................................................. 11 4.3 Test Environments ................................................................................................................................... 12 4.4 Test Setups .............................................................................................................................................. 13 4.5 Test Conditions ........................................................................................................................................ 16 5 Main Test Instruments .......................................................................................................................................... 19 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 19 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J 2012 47 CFR FCC Part 15, Subpart C 2012 Test Method: FCC KDB 558074 D01 DTS Meas Guidance v03r01 FCC KDB 662911 D01 Multiple Transmitter Output v01r2 1.2 Test Location Test Location 1: Reliability Laboratory of Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C 1.3 Test Environment Condit…

Text truncated - open the document above for the full version.

RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 420 Appendix for Test report RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 420 Appendix A: DTS (6 dB) Bandwidth In this document, the "DTS6dBBW" refers to the measured "DTS (6 dB) Bandwidth" value. In this Appendix, the "fc(DTS6dBBW)" refers to the centre of the measured "DTS6dBBW". The introduction of the "fc(DTS6dBBW)" is due to that other measurements use it as the spectrum analyzer setting. For measurements on smart antenna systems (devices with multiple transmit chains), the test is performed at each chain, and used as respective results for each chain. Part I - Test Results Test Mode Test Channel Frequency[MHz] Ant DTS6dBBW[MHz] Verdict 11B L 2412 Ant 1 8.62 pass 11B L 2412 Ant 2 8.30 pass 11B M 2437 Ant 1 7.95 pass 11B M 2437 Ant 2 7.92 pass 11B H 2462 Ant 1 7.92 pass 11B H 2462 Ant 2 8.43 pass 11G L 2412 Ant 1 16.42 pass 11G L 2412 Ant 2 16.47 pass 11G M 2437 Ant 1 16.52 pass 11G M 2437 Ant 2 16.49 pass 11G H 2462 Ant 1 16.44 pass 11G H 2462 Ant 2 16.45 pass 11N20 L 2412 Ant 1 17.71 pass 11N20 L 2412 Ant 2 17.74 pass 11N20 M 2437 Ant 1 17.72 pass 11N20 M 2437 Ant 2 17.70 pass 11N20 H 2462 Ant 1 17.38 pass 11N20 H 2462 Ant 2 17.65 pass 11N20m L 2412 Ant 1 17.68 pass 11N20m L 2412 Ant 2 17.71 pass 11N20m M 2437 Ant 1 17.69 pass 11N20m M 2437 Ant 2 17.69 pass 11N20m H 2462 Ant 1 17.60 pass 11N20m H 2462 Ant 2 17.02 pass 11N40 L 2422 Ant 1 33.89 pass 11N40 L 2422 Ant 2 35.40 pass 11N40 M 2437 Ant 1 36.03 pass 11N40 M 2437 Ant 2 36.44 pass RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 420 Test Mode Test Channel Frequency[MHz] Ant DTS6dBBW[MHz] Verdict 11N40 H 2452 Ant 1 35.78 pass 11N40 H 2452 Ant 2 35.44 pass 11N40m L 2422 Ant 1 35.15 pass 11N40m L 2422 Ant 2 35.16 pass 11N40m M 2437 Ant 1 36.36 pass 11N40m M 2437 Ant 2 35.17 pass 11N40m H 2452 Ant 1 32.64 pass 11N40m H 2452 Ant 2 30.07 pass RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 420 Part II - Test Plots 1.1 11B_L@Ant 1 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 420 1.2 11B_L@Ant 2 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 420 1.3 11B_M@Ant 1 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 7 of 420 1.4 11B_M@Ant 2 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 8 of 420 1.5 11B_H@Ant 1 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 9 of 420 1.6 11B_H@Ant 2 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 10 of 420 1.7 11G_L@Ant 1 RF Test Report of E5172s-515 Report No: SYBH(Z-RF)031042013-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 11 of 420 1.8 11G_L@Ant 2 RF Test Report of E5…

Text truncated - open the document above for the full version.