QISE5180S-517LTE cube

Quick Start 1 Thank you for purchasing the LTE cube. This LTE cube brings you a high speed wireless network connection. This document will help you understand your LTE cube, so you can start using it right away. Please read this document carefully before using your LTE cube. For detailed information about the functions and configurations of the LTE cube, refer to the online help on the web management page that comes with the LTE cube. Getting to know your LTE cube Note:  During thunderstorms and rainy weather, turn off and disconnect the LTE cube.  The LTE cube function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. Application scenario The LTE cube can:  Provide Internet access for Wi-Fi devices and a computer.  Connect to a telephone for voice services. Note: When connected to a 2G network, the LTE cube supports circuit switched (CS) calls but not VoIP. 2  Connect to a fax machine for fax services.  Expand LAN coverage together with a hub or a switch. Note: When the LTE cube is in use, you can alter its position or orientation to improve signal reception. 3 Selecting the installation environment Obstacles such as concrete and wooden walls will affect the transmission of the network signal. It is recommended that when you install LTE cube you choose an open space. Keep the LTE cube away from equipment that generates strong magnetic and electric fields, for instance microwaves, refrigerators, and satellite receivers. Appearance ○ 1 Ex ternal antenna port Pull out the cover and connect optional external antenna. ○ 2 Pow er button  Press and hold the power button to power on or off the LTE cube.  Press the power button to turn on or off the decorative indicator. 4 ○ 3 Decorative indicator The LTE cube is powering on or this indicator is turned on. You can press the power button to turn off the indicator. ○ 4 Signal indicator  Steady blue: strong signal strength  Steady yellow: weak signal strength  Steady red: no signal ○ 5 Wi-Fi indicator  On: Wi-Fi enabled  Off: Wi-Fi disabled Note: For details about how to manually enable or disable the Wi-Fi function, refer to the WLAN settings section of the online help. ○ 6 Netw ork port indicator  Steady green and yellow off: The LTE cube is connected to a device, but no data is being transmitted.  Steady green and blinking yellow: Data is being transmitted.  Both green and yellow off: The LTE cube is not connected to any device. 5 ○ 7 Netw ork port (R J45) Connect to a computer, switch, or other network device. ○ 8 Voice ports (R J11) Connect to a telephone or a fax machine. ○ 9 Pow er port Connect to the LTE cube's power adapter. ○ 10 R eset button Press and hold to restore the LTE cube to its factory settings. Note: Restoring the default settings of the LTE cube will override all the previous settings. ○ 11 Micro-SIM card slot Accommodate a micro-SIM card. 6 Getting started Installing the micro-SIM card Install the micro-SIM card according to the illustration. Note:  When removing the micro-SIM card, gently press the micro-SIM card in, then release. The card will automatically pop out.  Do not remove the micro-SIM card when the LTE cube is powered on. Doing so will affect the performance of your LTE cube, and data stored on the micro-SIM card may be lost. 7 (Optional) Connecting to an external antenna In areas with poor reception, connect an external antenna to the LTE cube’s external antenna port to improve signal reception. Install the external antenna according to the illustration. Note:  Before installing or uninstalling the external antenna, ensure that the LTE cube is powered off and disconnected from the power outlet.  Do not change another unexpected antenna unless manufacturer provides.  Only use the external antenna indoors, and do not use it during thunderstorm.  To optimize the performance of the external antenna, please put the LTE cube at least 1 meter away from it. If you have installed two external antennas, the distance between them should be also greater than 1 meter. 8 Connecting to a power adapter Install the power adapter according to the illustration. Note: Use the provided power adapter. Use of an incompatible power adapter or one from an unknown manufacturer may cause the LTE cube to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product. 9 Logging in to the web management page The web-based configuration utility can be used for initial LTE cube installation, parameter configuration, and function management through the browser. The Windows 7 operating system and Internet Explorer 8.0 are used as an example. Ensure that the LTE cube is connected to the computer. Follow these steps to log in to the web management page: 1. Connect LTE cube cables. 2. Configure the computer's IP address so that the IP addresses of the computer and the LTE cube are in the same network segment. Note:  The LTE cube's default IP address is 192.168.8.1, the subnet mask is 255.255.255.0.  It is recommended that you use the automatically obtained IP addresses for the computer and domain name system (DNS) server. If you manually configure the computer IP address, you must set the DNS server IP address to the LTE cube's IP address. Otherwise, you will fail to log in to the web management page. 3. Open the browser, and enter http://192.168.8.1 in the address box. 4. Enter the user name and password to log in to the web management page. 10 Note: The default user name and password are printed on the LTE cube label. 11 Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: TUV Rheinland (Shenzhen) Co., Ltd. Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2014-9-25 To whom it may concern: FCC ID: QISE5180S-517 We the undersigned, hereby authorize TUV Rheinland (Shenzhen) Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TUV Rheinland (Shenzhen) Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2014-09-18 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISE5180S-517 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2015-03-15 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755- 28970299

E5180s-517 SECRET 2014-9-22 Page1, Total4 External Photos of E5180s-517 E5180s-517 SECRET 2014-9-22 Page2, Total4 E5180s-517 SECRET 2014-9-22 Page3, Total4 E5180s-517 SECRET 2014-9-22 Page4, Total4

E5180s-517 SECRET Page1, Total 1 E5180s-517 ID Label:

E5180s-517 SECRET Page1, Total 1 E5180s-517 Label location:

E5180s-517 SECRET 2014-9-26 Page1, Total8 Internal Photos of E5180s-517 E5180s-517 SECRET 2014-9-26 Page2, Total8 E5180s-517 SECRET 2014-9-26 Page3, Total8 E5180s-517 SECRET 2014-9-26 Page4, Total8 E5180s-517 SECRET 2014-9-26 Page5, Total8 E5180s-517 SECRET 2014-9-26 Page6, Total8 E5180s-517 SECRET 2014-9-26 Page7, Total8 E5180s-517 SECRET 2014-9-26 Page8, Total8

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Maximum Permissible Exposure(MPE) Estimation Report Product Name: LTE cube Model: E5180s-517 Report No.: SYBH(Z-SAR)001092014-2 FCC ID: QISE5180S-517 APPROVED (Lab Manager) PREPARED (Test Engineer) BY DATE 2014-09-20 2014-09-20 The test results of this test report relate exclusively to the item(s) tested.The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report NO.: SYBH(Z-SAR)001092014-2 FCC ID: QISE5180S-517 2014-09-20 Page 2 of 20 ※ ※ Modified History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release 2014-09-20 Cheng Jiawen Report NO.: SYBH(Z-SAR)001092014-2 FCC ID: QISE5180S-517 2014-09-20 Page 3 of 20 Table of Contents 1 EUT Description ............................................................................................................................. 5 1.1 General Description ............................................................................................................ 6 2 Test specification(s) ....................................................................................................................... 7 3 Testing laboratory .......................................................................................................................... 7 4 Applicant and Manufacturer ........................................................................................................... 7 5 Application details .......................................................................................................................... 7 6 Ambient Condition .......................................................................................................................... 7 7 RF Exposure Requirements ........................................................................................................... 8 8 RF Exposure Evaluation .............................................................................................................. 11 8.1 Operation in GSM850 ....................................................................................................... 11 8.2 Operation in GSM1900 ..................................................................................................... 12 8.3 Operation in UMTS Band V .............................................................................................. 13 8.4 Operation in UMTS Band IV ............................................................................................. 13 8.5 Operation in UMTS Band II ............................................................................................... 14 8.6 Operation in LTE Band V .................................................................................................. 14 8.7 Operation in LTE Band IV ................................................................................................. 15 8.8 Operation in LTE Band II .................................................................................................. 15 8.9 Operation in LTE Band VII ................................................................................................ 16 8.10 Operation in WiFi 2.4G SISO ............................................................................................ 16 9 Exposure calculations for multiple sources ................................................................................. 17 9.1 Estimation for WIFI 2.4G MIMO ........................................................................................ 18 9.2 Estimation for GSM850 & WIFI 2.4G ................................................................................ 18 9.3 Estimation for GSM1900 & WIFI 2.4G .............................................................................. 18 9.4 Estimation for UMTS Band V & WIFI 2.4G ....................................................................... 18 9.5 Estimation for UMTS Band IV & WIFI 2.4G ...................................................................... 19 9.6 Estimation for UMTS Band II & WIFI 2.4G ....................................................................... 19 9.7 Estimation for LTE Band V & WIFI 2.4G ........................................................................... 19 Report NO.: SYBH(Z-SAR)001092014-2 FCC ID: QISE5180S-517 2014-09-20 Page 4 of 20 9.8 Estimation for LTE Band IV & WIFI 2.4G .......................................................................... 19 9.9 Estimation for LTE Band II & WIFI 2.4G ........................................................................... 20 9.10 Estimation for LTE Band VII & WIFI 2.4G......................................................................... 20 Report NO.: SYBH(Z-SAR)001092014-2 FCC ID: QISE5180S-517 2014-09-20 Page 5 of 20 1 EUT Description Device Information： DUT Name: LTE cube Type Identification: E5180s-517 Device Type : Mobile Device FCC ID: QISE5180S-517 Device Phase: Identical Prototype Exposure Category: Uncontrolled environment/general population Hardware Version : CL1E5180SM07 &CL1E5180SR Software Version : 21.270.13.01T.00 Antenna Type : Internal Antenna, External Antenna Device Operating Configurations: Supporting Mode(s) GSM850/1900,UMTS Band V/IV/II,LTE band V/IV/II/VII, WiFi 2.4G Test Modulation GSM(GMSK/8PSK),UMTS(QPSK),LTE(QPSK/16QAM),WiFi(OFDM) Operating Frequency Range(s) Band Tx (MHz) Rx (MHz) GSM850 824-849 869-894 GSM1900 1850-1910 1930-1990 UMTS Band V 824-849 869-894 UMTS Band IV 1710-1755 2110-2155 UM…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: LTE cube Model Number: E5180s-517 Report No: SYBH(Z-RF)001092014-2002 FCC ID：QISE5180S-517 Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 21 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1 and 6369A-3. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 21 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2014-09-16 Start Date of Test: 2014-09-16 End Date of Test: 2014-09-17 Test Result: Pass Approved by Senior Engineer: 2014-09-18 Liu Chunlin Date Name Signature Prepared by: 2014-09-18 Zhang Guocai Date Name Signature RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 21 Modification Record No. Last Report No. Modification Description First Report RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 21 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard ........................................................................................................................................ 6 1.2 Test Location.............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 3 Description of the Equipment under Test (EUT) ..................................................................................................... 8 3.1 General Description ................................................................................................................................... 8 3.2 EUT Identity ............................................................................................................................................... 8 3.3 Technical Description ................................................................................................................................. 9 4 General Test Conditions / Configurations ............................................................................................................. 10 4.1 Test Modes .............................................................................................................................................. 10 4.2 EUT Configurations .................................................................................................................................. 10 4.3 Test Environments ................................................................................................................................... 12 4.4 Antenna requirements .............................................................................................................................. 12 4.5 Description of tests ................................................................................................................................... 13 4.6 Test Setups .............................................................................................................................................. 15 4.7 Test Conditions ........................................................................................................................................ 18 5 Main Test Instruments .......................................................................................................................................... 21 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 21 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J 2013 47 CFR FCC Part 15, Subpart C 2013 Test Method: FCC KDB 558074 D01 DTS Meas Guidance v03r02 FCC KDB 662911 D01 Multiple Transmitter Output v02 ANSI C63.10-2009, American National Standard for Testing Unlicensed Wireless Devices. 1.2 Test Location Test Location 1: Reliability Laboratory of Huawei Technologies Co., Lt…

Text truncated - open the document above for the full version.

RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 444 Appendix for Test report RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 444 Appendix A: DTS (6 dB) Bandwidth In this document, the "DTS6dBBW" refers to the measured "DTS (6 dB) Bandwidth" value. In this Appendix, the "fc(DTS6dBBW)" refers to the centre of the measured "DTS6dBBW". The introduction of the "fc(DTS6dBBW)" is due to that other measurements use it as the spectrum analyzer setting. For measurements on smart antenna systems (devices with multiple transmit chains), the test is performed at each chain, and used as respective results for each chain. Part I - Test Results Test Mode Test Channel Frequency[MHz] Ant DTS6dBBW[MHz] Verdict 11B L 2412 Ant 1 8.21 pass 11B L 2412 Ant 2 8.57 pass 11B M 2437 Ant 1 8.39 pass 11B M 2437 Ant 2 8.42 pass 11B H 2462 Ant 1 8.24 pass 11B H 2462 Ant 2 6.89 pass 11G L 2412 Ant 1 16.50 pass 11G L 2412 Ant 2 16.53 pass 11G M 2437 Ant 1 16.53 pass 11G M 2437 Ant 2 16.51 pass 11G H 2462 Ant 1 16.48 pass 11G H 2462 Ant 2 16.48 pass 11N20 L 2412 Ant 1 17.69 pass 11N20 L 2412 Ant 2 17.73 pass 11N20 M 2437 Ant 1 17.70 pass 11N20 M 2437 Ant 2 17.73 pass 11N20 H 2462 Ant 1 17.66 pass 11N20 H 2462 Ant 2 17.73 pass 11N20m L 2412 Ant 1 17.71 pass 11N20m L 2412 Ant 2 17.65 pass 11N20m M 2437 Ant 1 17.65 pass 11N20m M 2437 Ant 2 17.65 pass 11N20m H 2462 Ant 1 17.34 pass 11N20m H 2462 Ant 2 17.66 pass 11N40 L 2422 Ant 1 36.34 pass 11N40 L 2422 Ant 2 28.21 pass 11N40 L 2422 Ant 2 36.34 pass 11N40 M 2437 Ant 1 36.41 pass RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 444 Test Mode Test Channel Frequency[MHz] Ant DTS6dBBW[MHz] Verdict 11N40 M 2437 Ant 2 36.42 pass 11N40 H 2452 Ant 1 35.82 pass 11N40 H 2452 Ant 2 36.41 pass 11N40m L 2422 Ant 1 35.06 pass 11N40m L 2422 Ant 2 35.46 pass 11N40m M 2437 Ant 1 35.20 pass 11N40m M 2437 Ant 2 35.22 pass 11N40m H 2452 Ant 1 32.96 pass 11N40m H 2452 Ant 2 35.67 pass RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 444 Part II - Test Plots 2.1 11B_L@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 444 2.2 11B_L@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 444 2.3 11B_M@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 7 of 444 2.4 11B_M@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 8 of 444 2.5 11B_H@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 9 of 444 2.6 11B_H@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 10 of 444 2.7 11G_L@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 11 of 444 2.8 11G_L@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 12 of 444 2.9 11G_M@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 13 of 444 2.10 11G_M@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 14 of 444 2.11 11G_H@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 15 of 444 2.12 11G_H@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 16 of 444 2.13 11N20_L@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 17 of 444 2.14 11N20_L@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 18 of 444 2.15 11N20_M@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 19 of 444 2.16 11N20_M@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 20 of 444 2.17 11N20_H@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 21 of 444 2.18 11N20_H@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 22 of 444 2.19 11N20m_L@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 23 of 444 2.20 11N20m_L@Ant 2 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 24 of 444 2.21 11N20m_M@Ant 1 RF Test Report of E5180s-517 Report No: SYBH(Z-RF)001092014-2002 Huawei Pr…

Text truncated - open the document above for the full version.

Photos of Test Setup For GSM&WCDMA&LTE 1．Radiated Spurious Emissions Radiated Spurious Emission (below 3GHz) Radiated Spurious Emission (3GHz to18GHz) Radiated Spurious Emission (18GHz to26.5GHz) For Bluetooth & Wlan 2．Radiated Spurious Emissions Radiated Spurious Emission (below 1GHz) Radiated Spurious Emission (1GHz to18GHz) Radiated Spurious Emission (above 18GHz) Conducted Emissions Conducted Emissions for AC Ports --------------------------------------------The END-------------------------------------------