QISE660AHSDPA/UMTS/EDGE/GPRS/GSM Data Card

Wonderful Communication, Mobile Life. Welcome to use HUAWEI 3G Data Card from Huawei Technologies Co., Ltd. HUAWEI 3G Data Card User Manual Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, expressed or implied. i Contents 1 Overview ............................................................................................................1 2 Descriptions of the Data Card Management GUI ...............................................2 Starting the Data Card Management ............................................................2 Introduction to the Main Screen ...................................................................3 3 Internet Services .................................................................................................7 Browsing the Internet ...................................................................................7 Viewing Connection Information .................................................................7 Volume Statistic............................................................................................8 4 Message Services .............................................................................................10 Writing a Message......................................................................................10 Outbox........................................................................................................11 Inbox..........................................................................................................14 Draft ...........................................................................................................18 Trash...........................................................................................................19 Report.........................................................................................................21 Importing a Message ..................................................................................22 5 Phone Book Management.................................................................................24 Information Management ...........................................................................24 Export/Import Management .......................................................................29 6 Settings and Information Query........................................................................33 Message Settings ........................................................................................33 Network Settings ........................................................................................35 ii Connection Settings ...................................................................................37 System Settings ..........................................................................................39 PIN Management .......................................................................................39 Viewing Diagnostics Information...............................................................43 About HUAWEI 3G Data Card ..................................................................43 7 FAQ on HUAWEI 3G Data Card .....................................................................44 8 Technical Support .............................................................................................46 Huawei Technologies Co., Ltd. ..................................................................46 9 Abbreviations ...................................................................................................47 1 1 Overview Welcome to use HUAWEI 3G Data Card. With this product, you can easily access the following: Internet Services You can access the Internet by connecting to networks, and surf the Internet conveniently. Message Services HUAWEI 3G Data Card Management (hereinafter referred to as the Data Card Management), provides message services, and features the large storage capacity and easy manageability. You can edit, receive and send messages directly on your laptop after inserting the SIM/USIM card. Phone Book Management You can transfer the phone book information of a large capacity to your laptop. You can create, modify, and delete the phone book information, and also send messages through the phone book directly. The Data Card Management also supports the import and export of phone book information to help in information management. Settings and Information Query You can build a personalized platform, set HUAWEI 3G Data Card and query or modify settings at any time. 2 2 Descriptions of the Data Card Management GUI Starting the Data Card Management 1. To start the program, double-click the shortcut icon of the Data Card Management on the desktop. 2. If it prompts to enter the Personal Identification Number (PIN), enter a valid PIN and click OK. Note: z You have three chances to enter a valid PIN. If you enter wrong PINs for three times, your SIM/USIM card is blocked. Then you need to use PIN Unblocking Key (PUK) to unblock it. z You have 10 chances to enter a valid PUK. If you enter wrong PUKs for ten times, your SIM/USIM card cannot be used. If this happens, contact your service provider. z When you fail to enter the valid PIN or the PUK, you can click Cancel to cancel the validation operation. In this case, you cannot use the related functions of the SIM/…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISE660A to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page1,Total 5 External Photos of HUAWEI E660A HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page2,Total 5 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page3,Total 5 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page4,Total 5 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page5,Total 5

HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page1, Total 1 ID Label Location_E660A

HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page1, Total 1 ID Label of E660A

HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page1,Total 6 Internal Photos of HUAWEI E660A HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page2,Total 6 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page3,Total 6 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page4,Total 6 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page5,Total 6 HSDPA/UMTS/EDGE/GPRS/GSM DATACARD E660A SECRET Page6,Total 6

No.2007EEE00107-1Page 2 of 83 Notes 1. . The test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 2. Copies of the test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 3. The test report shall be invalid if there are no signatures of the testing person, reviewing person and approving person on it. 4. The test report shall be invalid if it is altered. 5. Any demurral about the test shall be put forward to the testing organization within 15 days after the receiving of the test report. 6. This test report standalone dose not constitute or imply by its own an approval of the product by any Certification Authorities or Competent Bodies. 7. This report is only valid if complete, and test report shall not be reproduced except in full, without written approval of the laboratory. 8. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of Telecommunication Metrology Center of MII and the Accreditation Bodies, if it applies. Address:No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China (Telecommunication Metrology Center of MII) Post code: 100083 Telephone: +86 10 62302041Fax:+86 10 62304793 Web site: http://www.emcite.com E-mail: [email protected] No.2007EEE00107-1Page 3 of 83 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES..........................................................................................3 2 GENERAL CONDITIONS............................................................................................................3 3 DESCRIPTION OF EUT ..............................................................................................................3 3.1 ADDRESSING INFORMATION RELATED TO EUT............................................................................................... 3 3.2 C ONSTITUENTS OF EUT ................................................................................................................................. 3 3.3 G ENERAL DESCRIPTION.................................................................................................................................. 3 4 OPERATIONAL CONDITIONS DURING TEST ..........................................................................3 4.1 SCHEMATIC TEST CONFIGURATION................................................................................................................. 3 4.2 SAR M EASUREMENT SET-UP.......................................................................................................................... 3 4.3 D ASY4E-FIELD PROBESYSTEM..................................................................................................................... 3 4.4 E- FIELDPROBE CALIBRATION........................................................................................................................ 3 4.5 O THERTEST EQUIPMENT...............................................................................................................................3 4.6 E QUIVALENT TISSUES..................................................................................................................................... 3 4.7 S YSTEM SPECIFICATIONS................................................................................................................................3 5 CHARACTERISTICS OF THE TEST ..........................................................................................3 5.1 APPLICABLELIMIT REGULATIONS.................................................................................................................. 3 5.2 A PPLICABLEMEASUREMENT STANDARDS...................................................................................................... 3 6 LABORATORY ENVIRONMENT.................................................................................................3 7 CONDUCTED OUTPUT POWER MEASUREMENT...................................................................3 7.1 SUMMARY...................................................................................................................................................... 3 7.2 C ONDUCTED POWER...................................................................................................................................... 3 8 TEST RESULTS ..........................................................................................................................3 8.1 DIELECTRIC PERFORMANCE........................................................................................................................... 3 8.2 S YSTEMVALIDATION...................................................................................................................................... 3 8.3 S UMMARY OF MEASUREMENT RESULTS......................................................................................................... 3 8.4 C ONCLUSION.................................................................................................................................................. 3 9 MEASUREMENT UNCERTAINTY..............................................................................................3 10 MAIN TEST INSTRUMENTS.....................................................................................................3 10 TEST PERIOD...........................................................................................................................3 11 TEST LOCATION ......................................................................................................................3 ANNEX A˖ MEASUREMENT PROCESS....................................................................................3 ANNEX B˖ TEST LAYOUT..........................................................................................................3 ANNEX C: GRAPH RESULTS ............................................…

Text truncated - open the document above for the full version.

Telecommunication Metrology Center of Ministry of Information Industry No.2007EEE00107Page 2 of 219 Notes 1. . The test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 2. Copies of the test report shall be invalid if there is no “specified stamp for the test report” or the stamp of the test organization on it. 3. The test report shall be invalid if there are no signatures of the testing person, reviewing person and approving person on it. 4. The test report shall be invalid if it is altered. 5. Any demurral about the test shall be put forward to the testing organization within 15 days after the receiving of the test report. 6. This test report standalone dose not constitute or imply by its own an approval of the product by any Certification Authorities or Competent Bodies. 7. This report is only valid if complete, and test report shall not be reproduced except in full, without written approval of the laboratory. 8. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of Telecommunication Metrology Center of MII and the Accreditation Bodies, if it applies. Address:No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China (Telecommunication Metrology Center of MII) Post code: 100083 Telephone: +86 10 62302041Fax:+86 10 62304793 Web site: http://www.emcite.com E-mail: [email protected] Telecommunication Metrology Center of Ministry of Information Industry No.2007EEE00107Page 3 of 219 TABLE OF CONTENT 1 COMPETENCE AND WARRANTIES..........................................................................................6 2 GENERAL CONDITIONS............................................................................................................6 3 DESCRIPTION OF EUT ..............................................................................................................6 3.1 ADDRESSING INFORMATION RELATED TO EUT............................................................................................... 6 3.2 C ONSTITUENTS OF EUT ................................................................................................................................. 7 3.3 G ENERAL DESCRIPTION.................................................................................................................................. 8 4 OPERATIONAL CONDITIONS DURING TEST..........................................................................8 4.1 SCHEMATIC TEST CONFIGURATION................................................................................................................. 8 4.2 SAR M EASUREMENT SET-UP........................................................................................................................ 11 4.3 D ASY4E-FIELD PROBESYSTEM................................................................................................................... 12 4.4 E- FIELDPROBE CALIBRATION...................................................................................................................... 13 4.5 O THERTEST EQUIPMENT............................................................................................................................. 14 4.5.1 D EVICEHOLDER FOR TRANSMITTERS....................................................................................................... 14 4.5.2 P HANTOM.................................................................................................................................................. 14 4.6 E QUIVALENT TISSUES................................................................................................................................... 14 4.7 S YSTEM SPECIFICATIONS.............................................................................................................................. 15 4.7.1 R OBOTICSYSTEM SPECIFICATIONS........................................................................................................... 15 5 CHARACTERISTICS OF THE TEST ........................................................................................15 5.1 APPLICABLELIMIT REGULATIONS................................................................................................................ 15 5.2 A PPLICABLEMEASUREMENT STANDARDS.................................................................................................... 16 6 LABORATORY ENVIRONMENT...............................................................................................16 7 CONDUCTED OUTPUT POWER MEASUREMENT.................................................................16 7.1 SUMMARY.................................................................................................................................................... 16 7.2 C ONDUCTED POWER.................................................................................................................................... 17 8 TEST RESULTS ........................................................................................................................18 8.1 DIELECTRIC PERFORMANCE......................................................................................................................... 18 8.2 S YSTEMVALIDATION.................................................................................................................................... 18 8.3 S UMMARY OF MEASUREMENT RESULTS (WCDMA 850) ............................................................................. 19 8.4 S UMMARY OF MEASUREMENT RESULTS (WCDMA 1900) ........................................................................... 21 8.5 S UMMARY OF MEASUREMENT RESULTS (850MHZGPRS)........................................................................... 24 8.6 S UMMARY OF MEASUREMENT RESULTS (1900 MHZGPRS)........................................................................ 26 8.7 C ONCLUSION.....................................…

Text truncated - open the document above for the full version.

Report No: SYBH(R) 48102006EB-2 FCC ID: QISE660A FCC TEST REPORT OF HSDPA/UMTS/EDGE/GPRS/GSM DATACARD M/N: E660A Jan. 8, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH (R) 48102006EB-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C2583, R2364, and T256. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HSDPA/UMTS/EDGE/GPRS/GSM DATACARD M/N: E660A Report No: SYBH(R) 48102006EB-2 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 8 items need to be tested, 8 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2006.06.30 Tang Shuanli Date Name signature Technical Responsibility For Area of Testing 2006.06.29 Zhang Xinghai Date Name signature Test Lab Engineer 2006.06.27 Zhu Yongsheng Date Name signature Report No: SYBH (R) 48102006EB-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total37 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..................................................................................................................... 12 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................... 12 6.2 MODULATION CHARACTERISTICS.......................................................................................................... 16 6.3 OCCUPIED BANDWIDTH........................................................................................................................ 18 6.4 BAND EDGES COMPLIANCE.................................................................................................................. 21 6.5 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 23 6.6 RADIATED SPURIOUS EMISSION........................................................................................................... 25 6.7 FREQUENCY STABILITY........................................................................................................................ 29 7 EMC Test.................................................................................................................................................. 34 7.1 RADIATED EMISSION OF ENCLOSURE IN IDLE MODE............................................................................... 34 8 System Measurement Uncertainty......................................................................................................... 36 9 Appendixes............................................................................................................................…

Text truncated - open the document above for the full version.

Report No: SYBH(R)48102006EB-1 FCC ID: QISE660A FCC TEST REPORT OF HSDPA/UMTS/EDGE/GPRS/GSM DUALMODE 7BAND DATACARD M/N: E660A Jan. 8, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH (R)48102006EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C2583, R2364, and T256. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HSDPA/UMTS/EDGE/GPRS/GSM DUALMODE 7BAND DATACARD M/N: E660A Report No: SYBH(R) 48102006EB-1 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 8 items need to be tested, 8 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2007.01.15 Tang Shuanli Date Name signature Technical Responsibility For Area of Testing 2007.01.16 Zhang Xinghai Date Name signature Test Lab Engineer 2007.01.19 Zhu Yongsheng Date Name signature Report No: SYBH (R)48102006EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total37 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS..................................................................................................…

Text truncated - open the document above for the full version.